summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch
diff options
context:
space:
mode:
Diffstat (limited to 'meta-agl-bsp/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch')
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch108
1 files changed, 108 insertions, 0 deletions
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch
new file mode 100644
index 000000000..029cac496
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/u-boot/u-boot-2019.07/0003-arm-mach-bcm283x-Define-configs-for-RaspberryPi-4.patch
@@ -0,0 +1,108 @@
+From c03f551cab8fe38de8f0e1781f0e2e339419b003 Mon Sep 17 00:00:00 2001
+From: Andrei Gherzan <andrei@balena.io>
+Date: Wed, 17 Jul 2019 15:33:01 +0100
+Subject: [PATCH 3/7] arm: mach-bcm283x: Define configs for RaspberryPi 4
+
+Define two target configs for Raspberry Pi 4 (32 and 64bit) and the
+corresponding BCM2838* configs.
+
+Be aware of the current limitation in firmware which requires an
+explicit configuration to force the arm in 64bit mode when the
+respective target is used.
+
+Signed-off-by: Andrei Gherzan <andrei@balena.io>
+Signed-off-by: Matthias Brugger <mbrugger@suse.com>
+Upstream-status: Pending
+---
+ arch/arm/mach-bcm283x/Kconfig | 62 +++++++++++++++++++++++++++++++++++
+ 1 file changed, 62 insertions(+)
+
+diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
+index 8e69914a83..09a5b42bbb 100644
+--- a/arch/arm/mach-bcm283x/Kconfig
++++ b/arch/arm/mach-bcm283x/Kconfig
+@@ -26,6 +26,23 @@ config BCM2837_64B
+ select BCM2837
+ select ARM64
+
++config BCM2838
++ bool "Broadcom BCM2838 SoC support"
++ depends on ARCH_BCM283X
++
++config BCM2838_32B
++ bool "Broadcom BCM2838 SoC 32-bit support"
++ depends on ARCH_BCM283X
++ select BCM2838
++ select ARMV7_LPAE
++ select CPU_V7A
++
++config BCM2838_64B
++ bool "Broadcom BCM2838 SoC 64-bit support"
++ depends on ARCH_BCM283X
++ select BCM2838
++ select ARM64
++
+ menu "Broadcom BCM283X family"
+ depends on ARCH_BCM283X
+
+@@ -127,6 +144,50 @@ config TARGET_RPI_3
+ This option creates a build targeting the ARMv8/AArch64 ISA.
+ select BCM2837_64B
+
++config TARGET_RPI_4_32B
++ bool "Raspberry Pi 4 32-bit build"
++ help
++ Support for all BCM2838-based Raspberry Pi variants, such as
++ the RPi 4 model B, in AArch32 (32-bit) mode.
++
++ This option assumes the VideoCore firmware is configured to use the
++ mini UART (rather than PL011) for the serial console. This is the
++ default on the RPi 4. To enable the UART console, the following non-
++ default option must be present in config.txt: enable_uart=1. This is
++ required for U-Boot to operate correctly, even if you only care
++ about the HDMI/usbkbd console.
++
++ Due to hardware incompatibilities, this can't be used with
++ BCM283/5/6/7.
++
++ This option creates a build targeting the ARMv7/AArch32 ISA.
++ select BCM2838_32B
++
++config TARGET_RPI_4
++ bool "Raspberry Pi 4 64-bit build"
++ help
++ Support for all BCM2838-based Raspberry Pi variants, such as
++ the RPi 4 model B, in AArch64 (64-bit) mode.
++
++ This option assumes the VideoCore firmware is configured to use the
++ mini UART (rather than PL011) for the serial console. This is the
++ default on the RPi 4. To enable the UART console, the following non-
++ default option must be present in config.txt: enable_uart=1. This is
++ required for U-Boot to operate correctly, even if you only care
++ about the HDMI/usbkbd console.
++
++ Due to hardware incompatibilities, this can't be used with
++ BCM283/5/6/7.
++
++ Also, due to a bug in firmware, switching to 64bit mode doesn't
++ happen automatically based on the kernel's image filename. See
++ https://github.com/raspberrypi/firmware/issues/1193 for more details.
++ Until that is resolved, the configuration (config.txt) needs to
++ explicitly set: arm_64bit=1.
++
++ This option creates a build targeting the ARMv8/AArch64 ISA.
++ select BCM2838_64B
++
+ endchoice
+
+ config SYS_BOARD
+@@ -145,5 +206,6 @@ config BCM283x_BASE
+ hex
+ default "0x20000000" if BCM2835
+ default "0x3f000000" if BCM2836 || BCM2837
++ default "0xfe000000" if BCM2838
+
+ endmenu
+--
+2.22.0
+