aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux
diff options
context:
space:
mode:
Diffstat (limited to 'meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux')
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch351
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch102
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch217
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch418
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend9
5 files changed, 1097 insertions, 0 deletions
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch
new file mode 100644
index 000000000..fce687290
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch
@@ -0,0 +1,351 @@
+From 380fd9f0da44ed62dff59a7c7e06f1190b58aa64 Mon Sep 17 00:00:00 2001
+From: Kevin Quigley <kevin@kquigley.co.uk>
+Date: Mon, 24 Sep 2018 12:22:31 +0000
+Subject: [PATCH 1/4] Add devicetree support for RaspberryPi 7" panel over DSI
+ I2C
+
+---
+ arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 5 +++
+ arch/arm/boot/dts/bcm2708-rpi-b.dts | 6 +++
+ arch/arm/boot/dts/bcm2708-rpi.dtsi | 21 ++++++++++
+ arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 5 +++
+ arch/arm/boot/dts/bcm270x.dtsi | 39 +++++++++++++++++
+ arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 6 +++
+ arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 5 +++
+ arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 5 +++
+ arch/arm/boot/dts/bcm2835-rpi-b.dts | 5 +++
+ arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +
+ arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 5 +++
+ arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 5 +++
+ arch/arm/boot/dts/bcm283x.dtsi | 16 ++++++-
+ arch/arm/boot/dts/overlays/Makefile | 1 +
+ .../boot/dts/overlays/rpi-7inch-overlay.dts | 42 +++++++++++++++++++
+ 15 files changed, 167 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts
+
+diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+index ef0beea3a3a3..83b95b9a6ec3 100644
+--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
++++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+@@ -121,3 +121,8 @@
+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+ };
+ };
++
++&i2c_dsi {
++ gpios = <&gpio 28 0
++ &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts
+index dea70fae90e6..ea5de651d59d 100644
+--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
++++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
+@@ -111,3 +111,9 @@
+ act_led_trigger = <&act_led>,"linux,default-trigger";
+ };
+ };
++
++
++&i2c_dsi {
++ gpios = <&gpio 2 0
++ &gpio 3 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi
+index b13632932192..2d8421f6681c 100644
+--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi
++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi
+@@ -132,6 +132,27 @@
+ power-domains = <&power RPI_POWER_DOMAIN_USB>;
+ };
+
++&v3d {
++ power-domains = <&power RPI_POWER_DOMAIN_V3D>;
++};
++
++&vec {
++ power-domains = <&power RPI_POWER_DOMAIN_VEC>;
++ status = "okay";
++};
++
++&dsi0 {
++ power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
++ status = "okay";
++};
++
++&dsi1 {
++ power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
++ status = "okay";
++};
++
++
++
+ &clocks {
+ firmware = <&firmware>;
+ };
+diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+index 34659505055a..c23f79395791 100644
+--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
++++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+@@ -122,3 +122,8 @@
+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+ };
+ };
++
++&i2c_dsi {
++ gpios = <&gpio 28 0
++ &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi
+index f086ff0deec5..0b1ef47b18b0 100644
+--- a/arch/arm/boot/dts/bcm270x.dtsi
++++ b/arch/arm/boot/dts/bcm270x.dtsi
+@@ -84,6 +84,26 @@
+ status = "disabled";
+ };
+
++ dsi1: dsi@7e700000 {
++ compatible = "brcm,bcm2835-dsi1";
++ reg = <0x7e700000 0x8c>;
++ interrupts = <2 12>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ #clock-cells = <1>;
++
++ clocks = <&clocks BCM2835_PLLD_DSI1>,
++ <&clocks BCM2835_CLOCK_DSI1E>,
++ <&clocks BCM2835_CLOCK_DSI1P>;
++ clock-names = "phy", "escape", "pixel";
++
++ clock-output-names = "dsi1_byte",
++ "dsi1_ddr2",
++ "dsi1_ddr";
++
++ status = "disabled";
++ };
++
+ firmwarekms: firmwarekms@7e600000 {
+ compatible = "raspberrypi,rpi-firmware-kms";
+ /* SMI interrupt reg */
+@@ -93,6 +113,21 @@
+ status = "disabled";
+ };
+
++ i2c_dsi: i2cdsi {
++ /* We have to use i2c-gpio because the
++ * firmware is also polling another device
++ * using the only hardware I2C bus that could
++ * connect to these pins.
++ */
++ compatible = "i2c-gpio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ gpios = <&gpio 28 0
++ &gpio 29 0>;
++
++ };
++
+ smi: smi@7e600000 {
+ compatible = "brcm,bcm2835-smi";
+ reg = <0x7e600000 0x100>;
+@@ -187,3 +222,7 @@
+ &vc4 {
+ status = "disabled";
+ };
++
++&dsi1 {
++ power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
++};
+diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
+index 37aed344cbbf..6ec9b28999f3 100644
+--- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
++++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
+@@ -190,3 +190,9 @@
+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
+ };
+ };
++
++&i2c_dsi {
++ gpios = <&gpio 44 0
++ &gpio 45 0>;
++};
++
+diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+index a462de2ce37e..346efbd4a95f 100644
+--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+@@ -109,3 +109,8 @@
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+ };
++
++&i2c_dsi {
++ gpios = <&gpio 28 0
++ &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+index 264c84e94329..8b9ebf3670c2 100644
+--- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
+@@ -102,3 +102,8 @@
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+ };
++
++&i2c_dsi {
++ gpios = <&gpio 2 0
++ &gpio 3 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
+index 03e3a7a7dc5e..4020e79fc989 100644
+--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
++++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
+@@ -97,3 +97,8 @@
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+ };
++
++&i2c_dsi {
++ gpios = <&gpio 28 0
++ &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
+index 356d4e6a17e5..0599f0a27e5f 100644
+--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
++++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
+@@ -101,10 +101,12 @@
+
+ &dsi0 {
+ power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
++ status = "okay";
+ };
+
+ &dsi1 {
+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
++ status = "okay";
+ };
+
+ &csi0 {
+diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+index 59e70f4a19e5..6c4c9c8d8ed0 100644
+--- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
++++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
+@@ -47,3 +47,8 @@
+ pinctrl-0 = <&uart0_gpio14>;
+ status = "okay";
+ };
++
++&i2c_dsi {
++ gpios = <&gpio 28 0
++ &gpio 29 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+index 8703d006a206..c99f70cefa61 100644
+--- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
+@@ -56,3 +56,8 @@
+ status = "okay";
+ bus-width = <4>;
+ };
++
++&i2c_dsi {
++ gpios = <&gpio 44 0
++ &gpio 45 0>;
++};
+diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
+index 22eca6fad427..3ee99963f827 100644
+--- a/arch/arm/boot/dts/bcm283x.dtsi
++++ b/arch/arm/boot/dts/bcm283x.dtsi
+@@ -551,7 +551,6 @@
+ clock-output-names = "dsi1_byte",
+ "dsi1_ddr2",
+ "dsi1_ddr";
+-
+ status = "disabled";
+ };
+
+@@ -652,6 +651,21 @@
+ vc4: gpu {
+ compatible = "brcm,bcm2835-vc4";
+ };
++
++ i2c_dsi: i2cdsi {
++ /* We have to use i2c-gpio because the
++ * firmware is also polling another device
++ * using the only hardware I2C bus that could
++ * connect to these pins.
++ */
++ compatible = "i2c-gpio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "disabled";
++ gpios = <&gpio 28 0
++ &gpio 29 0>;
++
++ };
+ };
+
+ clocks {
+diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
+index e0bdd84d21c5..f983d0180b8b 100644
+--- a/arch/arm/boot/dts/overlays/Makefile
++++ b/arch/arm/boot/dts/overlays/Makefile
+@@ -110,6 +110,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
+ rpi-cirrus-wm5102.dtbo \
+ rpi-dac.dtbo \
+ rpi-display.dtbo \
++ rpi-7inch.dtbo \
+ rpi-ft5406.dtbo \
+ rpi-poe.dtbo \
+ rpi-proto.dtbo \
+diff --git a/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts
+new file mode 100644
+index 000000000000..3bb882d79086
+--- /dev/null
++++ b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts
+@@ -0,0 +1,42 @@
++/*
++ * Device Tree overlay for RaspberryPi 7" Touchscreen panel
++ *
++ */
++
++/dts-v1/;
++/plugin/;
++
++/ {
++ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
++
++ fragment@1 {
++ target = <&dsi1>;
++ __overlay__ {
++ #address-cells = <1>; size-cells = <0>;
++ status = "okay";
++ port {
++ dsi_out_port: endpoint {
++ remote-endpoint = <&panel_dsi_port>;
++ };
++ };
++ };
++ };
++
++ fragment@2 {
++ target = <&i2c_dsi>;
++ __overlay__ {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ status = "okay";
++ lcd@45 {
++ compatible = "raspberrypi,7inch-touchscreen-panel";
++ reg = <0x45>;
++ port {
++ panel_dsi_port: endpoint {
++ remote-endpoint = <&dsi_out_port>;
++ };
++ };
++ };
++ };
++ };
++};
+--
+2.21.0
+
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch
new file mode 100644
index 000000000..13d821418
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch
@@ -0,0 +1,102 @@
+From ab06860f2361a3750ec3a62347e0fdd7873cb30d Mon Sep 17 00:00:00 2001
+From: Kevin Quigley <kevin@kquigley.co.uk>
+Date: Mon, 24 Sep 2018 18:07:40 +0000
+Subject: [PATCH 2/4] drm/vc4: Make DSI call into the bridge after the DSI link
+ is enabled. bring this patch https://patchwork.kernel.org/patch/10480937/ to
+ Linux rpi-4.14.y
+
+This allows panels or bridges that need to send DSI commands during
+pre_enable() to successfully send them. We delay DISP0 (aka the
+actual display) enabling until after pre_enable so that pixels aren't
+streaming before then.
+
+v2: Just clear out the encoder->bridge value to disable the midlayer
+ calls (idea by Andrzej Hajda).
+---
+ drivers/gpu/drm/vc4/vc4_dsi.c | 48 ++++++++++++++++++++++++-----------
+ 1 file changed, 33 insertions(+), 15 deletions(-)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
+index a3f416cbd1d6..3fa2db18d70f 100644
+--- a/drivers/gpu/drm/vc4/vc4_dsi.c
++++ b/drivers/gpu/drm/vc4/vc4_dsi.c
+@@ -814,7 +814,9 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder)
+ struct vc4_dsi *dsi = vc4_encoder->dsi;
+ struct device *dev = &dsi->pdev->dev;
+
++ drm_bridge_disable(dsi->bridge);
+ vc4_dsi_ulps(dsi, true);
++ drm_bridge_post_disable(dsi->bridge);
+
+ clk_disable_unprepare(dsi->pll_phy_clock);
+ clk_disable_unprepare(dsi->escape_clock);
+@@ -1089,21 +1091,6 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
+ /* Display reset sequence timeout */
+ DSI_PORT_WRITE(PR_TO_CNT, 100000);
+
+- if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
+- DSI_PORT_WRITE(DISP0_CTRL,
+- VC4_SET_FIELD(dsi->divider,
+- DSI_DISP0_PIX_CLK_DIV) |
+- VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) |
+- VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME,
+- DSI_DISP0_LP_STOP_CTRL) |
+- DSI_DISP0_ST_END |
+- DSI_DISP0_ENABLE);
+- } else {
+- DSI_PORT_WRITE(DISP0_CTRL,
+- DSI_DISP0_COMMAND_MODE |
+- DSI_DISP0_ENABLE);
+- }
+-
+ /* Set up DISP1 for transferring long command payloads through
+ * the pixfifo.
+ */
+@@ -1128,6 +1115,25 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
+
+ vc4_dsi_ulps(dsi, false);
+
++ drm_bridge_pre_enable(dsi->bridge);
++
++ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
++ DSI_PORT_WRITE(DISP0_CTRL,
++ VC4_SET_FIELD(dsi->divider,
++ DSI_DISP0_PIX_CLK_DIV) |
++ VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) |
++ VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME,
++ DSI_DISP0_LP_STOP_CTRL) |
++ DSI_DISP0_ST_END |
++ DSI_DISP0_ENABLE);
++ } else {
++ DSI_PORT_WRITE(DISP0_CTRL,
++ DSI_DISP0_COMMAND_MODE |
++ DSI_DISP0_ENABLE);
++ }
++
++ drm_bridge_enable(dsi->bridge);
++
+ if (debug_dump_regs) {
+ DRM_INFO("DSI regs after:\n");
+ vc4_dsi_dump_regs(dsi);
+@@ -1656,6 +1662,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+
+ dev_set_drvdata(dev, dsi);
+
++ ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
++ if (ret) {
++ dev_err(dev, "bridge attach failed: %d\n", ret);
++ return ret;
++ }
++ /* Disable the atomic helper calls into the bridge. We
++ * manually call the bridge pre_enable / enable / etc. calls
++ * from our driver, since we need to sequence them within the
++ * encoder's enable/disable paths.
++ */
++ dsi->encoder->bridge = NULL;
++
+ pm_runtime_enable(dev);
+
+ return 0;
+--
+2.21.0
+
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch
new file mode 100644
index 000000000..0e6e068fe
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch
@@ -0,0 +1,217 @@
+From 2ccd080392adfb1f077f2f4d289651b6b15e0951 Mon Sep 17 00:00:00 2001
+From: Kevin Quigley <kevin@kquigley.co.uk>
+Date: Mon, 24 Sep 2018 18:09:52 +0000
+Subject: [PATCH 3/4] drm/vc4: Set up the DSI host at pdev probe time, not
+ component bind. bring https://patchwork.kernel.org/patch/9902623/ to Linux
+ 4.14.y
+
+We need the following things to happen in sequence:
+
+DSI host creation
+DSI device creation in the panel driver (needs DSI host)
+DSI device attach from panel to host.
+DSI drm_panel_add()
+DSI encoder creation
+DSI encoder's DRM panel/bridge attach
+
+Unless we allow device creation while the host isn't up yet, we need
+to break the -EPROBE_DEFER deadlock between the panel driver looking
+up the host and the host driver looking up the panel. We can do so by
+moving the DSI host creation outside of the component bind loop, and
+the panel/bridge lookup/attach into the component bind process.
+---
+ drivers/gpu/drm/vc4/vc4_dsi.c | 93 ++++++++++++++++++++---------------
+ 1 file changed, 53 insertions(+), 40 deletions(-)
+
+diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
+index 3fa2db18d70f..faf38f17ec26 100644
+--- a/drivers/gpu/drm/vc4/vc4_dsi.c
++++ b/drivers/gpu/drm/vc4/vc4_dsi.c
+@@ -33,6 +33,7 @@
+ #include <drm/drm_crtc_helper.h>
+ #include <drm/drm_edid.h>
+ #include <drm/drm_mipi_dsi.h>
++#include <drm/drm_of.h>
+ #include <drm/drm_panel.h>
+ #include <linux/clk.h>
+ #include <linux/clk-provider.h>
+@@ -504,7 +505,6 @@ struct vc4_dsi {
+ struct mipi_dsi_host dsi_host;
+ struct drm_encoder *encoder;
+ struct drm_bridge *bridge;
+- bool is_panel_bridge;
+
+ void __iomem *regs;
+
+@@ -1300,7 +1300,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *device)
+ {
+ struct vc4_dsi *dsi = host_to_dsi(host);
+- int ret = 0;
+
+ dsi->lanes = device->lanes;
+ dsi->channel = device->channel;
+@@ -1335,33 +1334,12 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
+ return 0;
+ }
+
+- dsi->bridge = of_drm_find_bridge(device->dev.of_node);
+- if (!dsi->bridge) {
+- struct drm_panel *panel =
+- of_drm_find_panel(device->dev.of_node);
+-
+- dsi->bridge = drm_panel_bridge_add(panel,
+- DRM_MODE_CONNECTOR_DSI);
+- if (IS_ERR(dsi->bridge)) {
+- ret = PTR_ERR(dsi->bridge);
+- dsi->bridge = NULL;
+- return ret;
+- }
+- dsi->is_panel_bridge = true;
+- }
+-
+- return drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
++ return 0;
+ }
+
+ static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
+ struct mipi_dsi_device *device)
+ {
+- struct vc4_dsi *dsi = host_to_dsi(host);
+-
+- if (dsi->is_panel_bridge) {
+- drm_panel_bridge_remove(dsi->bridge);
+- dsi->bridge = NULL;
+- }
+
+ return 0;
+ }
+@@ -1525,16 +1503,13 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ struct platform_device *pdev = to_platform_device(dev);
+ struct drm_device *drm = dev_get_drvdata(master);
+ struct vc4_dev *vc4 = to_vc4_dev(drm);
+- struct vc4_dsi *dsi;
++ struct vc4_dsi *dsi = dev_get_drvdata(dev);
+ struct vc4_dsi_encoder *vc4_dsi_encoder;
++ struct drm_panel *panel;
+ const struct of_device_id *match;
+ dma_cap_mask_t dma_mask;
+ int ret;
+
+- dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
+- if (!dsi)
+- return -ENOMEM;
+-
+ match = of_match_device(vc4_dsi_dt_match, dev);
+ if (!match)
+ return -ENODEV;
+@@ -1549,7 +1524,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ vc4_dsi_encoder->dsi = dsi;
+ dsi->encoder = &vc4_dsi_encoder->base.base;
+
+- dsi->pdev = pdev;
+ dsi->regs = vc4_ioremap_regs(pdev, 0);
+ if (IS_ERR(dsi->regs))
+ return PTR_ERR(dsi->regs);
+@@ -1637,6 +1611,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ return ret;
+ }
+
++ ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
++ &panel, &dsi->bridge);
++ if (ret)
++ return ret;
++
++ if (panel) {
++ dsi->bridge = devm_drm_panel_bridge_add(dev, panel,
++ DRM_MODE_CONNECTOR_DSI);
++ if (IS_ERR(dsi->bridge))
++ return PTR_ERR(dsi->bridge);
++ }
++
+ /* The esc clock rate is supposed to always be 100Mhz. */
+ ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
+ if (ret) {
+@@ -1655,13 +1641,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ DRM_MODE_ENCODER_DSI, NULL);
+ drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs);
+
+- dsi->dsi_host.ops = &vc4_dsi_host_ops;
+- dsi->dsi_host.dev = dev;
+-
+- mipi_dsi_host_register(&dsi->dsi_host);
+-
+- dev_set_drvdata(dev, dsi);
+-
+ ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
+ if (ret) {
+ dev_err(dev, "bridge attach failed: %d\n", ret);
+@@ -1672,6 +1651,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
+ * from our driver, since we need to sequence them within the
+ * encoder's enable/disable paths.
+ */
++
+ dsi->encoder->bridge = NULL;
+
+ pm_runtime_enable(dev);
+@@ -1690,8 +1670,6 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master,
+
+ vc4_dsi_encoder_destroy(dsi->encoder);
+
+- mipi_dsi_host_unregister(&dsi->dsi_host);
+-
+ if (dsi->port == 1)
+ vc4->dsi1 = NULL;
+ }
+@@ -1703,12 +1681,47 @@ static const struct component_ops vc4_dsi_ops = {
+
+ static int vc4_dsi_dev_probe(struct platform_device *pdev)
+ {
+- return component_add(&pdev->dev, &vc4_dsi_ops);
++ struct device *dev = &pdev->dev;
++ struct vc4_dsi *dsi;
++ int ret;
++
++ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
++ if (!dsi)
++ return -ENOMEM;
++ dev_set_drvdata(dev, dsi);
++
++ dsi->pdev = pdev;
++
++ /* Note, the initialization sequence for DSI and panels is
++ * tricky. The component bind above won't get past its
++ * -EPROBE_DEFER until the panel/bridge probes. The
++ * panel/bridge will return -EPROBE_DEFER until it has a
++ * mipi_dsi_host to register its device to. So, we register
++ * the host during pdev probe time, so vc4 as a whole can then
++ * -EPROBE_DEFER its component bind process until the panel
++ * successfully attaches.
++ */
++ dsi->dsi_host.ops = &vc4_dsi_host_ops;
++ dsi->dsi_host.dev = dev;
++ mipi_dsi_host_register(&dsi->dsi_host);
++
++ ret = component_add(&pdev->dev, &vc4_dsi_ops);
++ if (ret) {
++ mipi_dsi_host_unregister(&dsi->dsi_host);
++ return ret;
++ }
++
++ return 0;
+ }
+
+ static int vc4_dsi_dev_remove(struct platform_device *pdev)
+ {
++ struct device *dev = &pdev->dev;
++ struct vc4_dsi *dsi = dev_get_drvdata(dev);
++
+ component_del(&pdev->dev, &vc4_dsi_ops);
++ mipi_dsi_host_unregister(&dsi->dsi_host);
++
+ return 0;
+ }
+
+--
+2.21.0
+
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch
new file mode 100644
index 000000000..17c32750b
--- /dev/null
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch
@@ -0,0 +1,418 @@
+From 7f745c7e13b50911424b9bbb4181d4dc72ef155f Mon Sep 17 00:00:00 2001
+From: Kevin Quigley <kevin@kquigley.co.uk>
+Date: Mon, 24 Sep 2018 12:14:41 +0000
+Subject: [PATCH 4/4] drm/panel: Backport 4.15 support for the Raspberry Pi 7"
+ Touchscreen
+
+---
+ .../drm/panel/panel-raspberrypi-touchscreen.c | 242 ++++++++----------
+ 1 file changed, 111 insertions(+), 131 deletions(-)
+
+diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+index 128523d8d518..2c9c9722734f 100644
+--- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
++++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright © 2016 Broadcom
++ * Copyright © 2016-2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+@@ -30,14 +30,15 @@
+ */
+
+ /**
+- * DOC: Raspberry Pi 7" touchscreen panel driver.
++ * Raspberry Pi 7" touchscreen panel driver.
+ *
+ * The 7" touchscreen consists of a DPI LCD panel, a Toshiba
+ * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR
+- * controlling power management, the LCD PWM, and the touchscreen.
++ * controlling power management, the LCD PWM, and initial register
++ * setup of the Tohsiba.
+ *
+- * This driver presents this device as a MIPI DSI panel to the DRM
+- * driver, and should expose the touchscreen as a HID device.
++ * This driver controls the TC358762 and ATTINY88, presenting a DSI
++ * device with a drm_panel.
+ */
+
+ #include <linux/delay.h>
+@@ -58,10 +59,12 @@
+ #include <drm/drm_mipi_dsi.h>
+ #include <drm/drm_panel.h>
+
++#define RPI_DSI_DRIVER_NAME "rpi-ts-dsi"
++
+ /* I2C registers of the Atmel microcontroller. */
+ enum REG_ADDR {
+ REG_ID = 0x80,
+- REG_PORTA, // BIT(2) for horizontal flip, BIT(3) for vertical flip
++ REG_PORTA, /* BIT(2) for horizontal flip, BIT(3) for vertical flip */
+ REG_PORTB,
+ REG_PORTC,
+ REG_PORTD,
+@@ -81,9 +84,6 @@ enum REG_ADDR {
+ REG_ID2,
+ };
+
+-/* We only turn the PWM on or off, without varying values. */
+-#define RPI_TOUCHSCREEN_MAX_BRIGHTNESS 1
+-
+ /* DSI D-PHY Layer Registers */
+ #define D0W_DPHYCONTTX 0x0004
+ #define CLW_DPHYCONTRX 0x0020
+@@ -100,8 +100,6 @@ enum REG_ADDR {
+ #define PPI_BUSYPPI 0x0108
+ #define PPI_LINEINITCNT 0x0110
+ #define PPI_LPTXTIMECNT 0x0114
+-//#define PPI_LANEENABLE 0x0134
+-//#define PPI_TX_RX_TA 0x013C
+ #define PPI_CLS_ATMR 0x0140
+ #define PPI_D0S_ATMR 0x0144
+ #define PPI_D1S_ATMR 0x0148
+@@ -197,43 +195,23 @@ enum REG_ADDR {
+ struct rpi_touchscreen {
+ struct drm_panel base;
+ struct mipi_dsi_device *dsi;
+- struct i2c_client *bridge_i2c;
+-
+- /* Version of the firmware on the bridge chip */
+- int atmel_ver;
++ struct i2c_client *i2c;
+ };
+
+ static const struct drm_display_mode rpi_touchscreen_modes[] = {
+ {
+- /* The DSI PLL can only integer divide from the 2Ghz
+- * PLLD, giving us few choices. We pick a divide by 3
+- * as our DSI HS clock, giving us a pixel clock of
+- * that divided by 24 bits. Pad out HFP to get our
+- * panel to refresh at 60Hz, even if that doesn't
+- * match the datasheet.
+- */
+-#define PIXEL_CLOCK ((2000000000 / 3) / 24)
+-#define VREFRESH 60
+-#define VTOTAL (480 + 7 + 2 + 21)
+-#define HACT 800
+-#define HSW 2
+-#define HBP 46
+-#define HFP ((PIXEL_CLOCK / (VTOTAL * VREFRESH)) - (HACT + HSW + HBP))
+-
+- /* Round up the pixel clock a bit (10khz), so that the
+- * "don't run things faster than the requested clock
+- * rate" rule of the clk driver doesn't reject the
+- * divide-by-3 mode due to rounding error.
++ /* Modeline comes from the Raspberry Pi firmware, with HFP=1
++ * plugged in and clock re-computed from that.
+ */
+- .clock = PIXEL_CLOCK / 1000 + 10,
+- .hdisplay = HACT,
+- .hsync_start = HACT + HFP,
+- .hsync_end = HACT + HFP + HSW,
+- .htotal = HACT + HFP + HSW + HBP,
++ .clock = 25979400 / 1000,
++ .hdisplay = 800,
++ .hsync_start = 800 + 1,
++ .hsync_end = 800 + 1 + 2,
++ .htotal = 800 + 1 + 2 + 46,
+ .vdisplay = 480,
+ .vsync_start = 480 + 7,
+ .vsync_end = 480 + 7 + 2,
+- .vtotal = VTOTAL,
++ .vtotal = 480 + 7 + 2 + 21,
+ .vrefresh = 60,
+ },
+ };
+@@ -245,7 +223,7 @@ static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel)
+
+ static int rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg)
+ {
+- return i2c_smbus_read_byte_data(ts->bridge_i2c, reg);
++ return i2c_smbus_read_byte_data(ts->i2c, reg);
+ }
+
+ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
+@@ -253,19 +231,13 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
+ {
+ int ret;
+
+- ret = i2c_smbus_write_byte_data(ts->bridge_i2c, reg, val);
++ ret = i2c_smbus_write_byte_data(ts->i2c, reg, val);
+ if (ret)
+ dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret);
+ }
+
+ static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
+ {
+-#if 0
+- /* The firmware uses LP DSI transactions like this to bring up
+- * the hardware, which should be faster than using I2C to then
+- * pass to the Toshiba. However, I was unable to get it to
+- * work.
+- */
+ u8 msg[] = {
+ reg,
+ reg >> 8,
+@@ -275,13 +247,7 @@ static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
+ val >> 24,
+ };
+
+- mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg));
+-#else
+- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8);
+- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg);
+- rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8);
+- rpi_touchscreen_i2c_write(ts, REG_WRITEL, val);
+-#endif
++ mipi_dsi_generic_write(ts->dsi, msg, sizeof(msg));
+
+ return 0;
+ }
+@@ -317,8 +283,7 @@ static int rpi_touchscreen_enable(struct drm_panel *panel)
+
+ rpi_touchscreen_write(ts, DSI_LANEENABLE,
+ DSI_LANEENABLE_CLOCK |
+- DSI_LANEENABLE_D0 |
+- (ts->dsi->lanes > 1 ? DSI_LANEENABLE_D1 : 0));
++ DSI_LANEENABLE_D0);
+ rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05);
+ rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05);
+ rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00);
+@@ -352,6 +317,7 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel)
+ struct drm_connector *connector = panel->connector;
+ struct drm_device *drm = panel->drm;
+ unsigned int i, num = 0;
++ static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+
+ for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) {
+ const struct drm_display_mode *m = &rpi_touchscreen_modes[i];
+@@ -378,6 +344,8 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel)
+ connector->display_info.bpc = 8;
+ connector->display_info.width_mm = 154;
+ connector->display_info.height_mm = 86;
++ drm_display_info_set_bus_formats(&connector->display_info,
++ &bus_format, 1);
+
+ return num;
+ }
+@@ -390,51 +358,27 @@ static const struct drm_panel_funcs rpi_touchscreen_funcs = {
+ .get_modes = rpi_touchscreen_get_modes,
+ };
+
+-static struct i2c_client *rpi_touchscreen_get_i2c(struct device *dev,
+- const char *name)
+-{
+- struct device_node *node;
+- struct i2c_client *client;
+-
+- node = of_parse_phandle(dev->of_node, name, 0);
+- if (!node)
+- return ERR_PTR(-ENODEV);
+-
+- client = of_find_i2c_device_by_node(node);
+-
+- of_node_put(node);
+-
+- if (!client)
+- return ERR_PTR(-EPROBE_DEFER);
+-
+- return client;
+-}
+-
+-static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
++static int rpi_touchscreen_probe(struct i2c_client *i2c,
++ const struct i2c_device_id *id)
+ {
+- struct device *dev = &dsi->dev;
++ struct device *dev = &i2c->dev;
+ struct rpi_touchscreen *ts;
++ struct device_node *endpoint, *dsi_host_node;
++ struct mipi_dsi_host *host;
+ int ret, ver;
++ struct mipi_dsi_device_info info = {
++ .type = RPI_DSI_DRIVER_NAME,
++ .channel = 0,
++ .node = NULL,
++ };
+
+ ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+ if (!ts)
+ return -ENOMEM;
+
+- dev_set_drvdata(dev, ts);
++ i2c_set_clientdata(i2c, ts);
+
+- ts->dsi = dsi;
+- dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
+- MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+- MIPI_DSI_MODE_LPM);
+- dsi->format = MIPI_DSI_FMT_RGB888;
+- dsi->lanes = 1;
+-
+- ts->bridge_i2c =
+- rpi_touchscreen_get_i2c(dev, "raspberrypi,touchscreen-bridge");
+- if (IS_ERR(ts->bridge_i2c)) {
+- ret = -EPROBE_DEFER;
+- return ret;
+- }
++ ts->i2c = i2c;
+
+ ver = rpi_touchscreen_i2c_read(ts, REG_ID);
+ if (ver < 0) {
+@@ -443,11 +387,8 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
+ }
+
+ switch (ver) {
+- case 0xde:
+- ts->atmel_ver = 1;
+- break;
+- case 0xc3:
+- ts->atmel_ver = 2;
++ case 0xde: /* ver 1 */
++ case 0xc3: /* ver 2 */
+ break;
+ default:
+ dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver);
+@@ -457,65 +398,104 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
+ /* Turn off at boot, so we can cleanly sequence powering on. */
+ rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
+
+- drm_panel_init(&ts->base);
++ /* Look up the DSI host. It needs to probe before we do. */
++ endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
++ dsi_host_node = of_graph_get_remote_port_parent(endpoint);
++ host = of_find_mipi_dsi_host_by_node(dsi_host_node);
++ of_node_put(dsi_host_node);
++ if (!host) {
++ of_node_put(endpoint);
++ return -EPROBE_DEFER;
++ }
++
++ info.node = of_graph_get_remote_port(endpoint);
++ of_node_put(endpoint);
++
++ ts->dsi = mipi_dsi_device_register_full(host, &info);
++ if (IS_ERR(ts->dsi)) {
++ dev_err(dev, "DSI device registration failed: %ld\n",
++ PTR_ERR(ts->dsi));
++ return PTR_ERR(ts->dsi);
++ }
++
+ ts->base.dev = dev;
+ ts->base.funcs = &rpi_touchscreen_funcs;
+
++ /* This appears last, as it's what will unblock the DSI host
++ * driver's component bind function.
++ */
+ ret = drm_panel_add(&ts->base);
+- if (ret < 0)
+- goto err_release_bridge;
+-
+- return mipi_dsi_attach(dsi);
++ if (ret)
++ return ret;
+
+-err_release_bridge:
+- put_device(&ts->bridge_i2c->dev);
+- return ret;
++ return 0;
+ }
+
+-static int rpi_touchscreen_dsi_remove(struct mipi_dsi_device *dsi)
++static int rpi_touchscreen_remove(struct i2c_client *i2c)
+ {
+- struct device *dev = &dsi->dev;
+- struct rpi_touchscreen *ts = dev_get_drvdata(dev);
+- int ret;
++ struct rpi_touchscreen *ts = i2c_get_clientdata(i2c);
+
+- ret = mipi_dsi_detach(dsi);
+- if (ret < 0) {
+- dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+- return ret;
+- }
++ mipi_dsi_detach(ts->dsi);
+
+- drm_panel_detach(&ts->base);
+ drm_panel_remove(&ts->base);
+
+- put_device(&ts->bridge_i2c->dev);
++ mipi_dsi_device_unregister(ts->dsi);
++ kfree(ts->dsi);
+
+ return 0;
+ }
+
+-static void rpi_touchscreen_dsi_shutdown(struct mipi_dsi_device *dsi)
++static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
+ {
+- struct device *dev = &dsi->dev;
+- struct rpi_touchscreen *ts = dev_get_drvdata(dev);
++ int ret;
+
+- rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
++ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
++ MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
++ MIPI_DSI_MODE_LPM);
++ dsi->format = MIPI_DSI_FMT_RGB888;
++ dsi->lanes = 1;
++
++ ret = mipi_dsi_attach(dsi);
++
++ if (ret)
++ dev_err(&dsi->dev, "failed to attach dsi to host: %d\n", ret);
++
++ return ret;
+ }
+
+-static const struct of_device_id rpi_touchscreen_of_match[] = {
+- { .compatible = "raspberrypi,touchscreen" },
++static struct mipi_dsi_driver rpi_touchscreen_dsi_driver = {
++ .driver.name = RPI_DSI_DRIVER_NAME,
++ .probe = rpi_touchscreen_dsi_probe,
++};
++
++static const struct of_device_id rpi_touchscreen_of_ids[] = {
++ { .compatible = "raspberrypi,7inch-touchscreen-panel" },
+ { } /* sentinel */
+ };
+-MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_match);
++MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_ids);
+
+-static struct mipi_dsi_driver rpi_touchscreen_driver = {
++static struct i2c_driver rpi_touchscreen_driver = {
+ .driver = {
+- .name = "raspberrypi-touchscreen",
+- .of_match_table = rpi_touchscreen_of_match,
++ .name = "rpi_touchscreen",
++ .of_match_table = rpi_touchscreen_of_ids,
+ },
+- .probe = rpi_touchscreen_dsi_probe,
+- .remove = rpi_touchscreen_dsi_remove,
+- .shutdown = rpi_touchscreen_dsi_shutdown,
++ .probe = rpi_touchscreen_probe,
++ .remove = rpi_touchscreen_remove,
+ };
+-module_mipi_dsi_driver(rpi_touchscreen_driver);
++
++static int __init rpi_touchscreen_init(void)
++{
++ mipi_dsi_driver_register(&rpi_touchscreen_dsi_driver);
++ return i2c_add_driver(&rpi_touchscreen_driver);
++}
++module_init(rpi_touchscreen_init);
++
++static void __exit rpi_touchscreen_exit(void)
++{
++ i2c_del_driver(&rpi_touchscreen_driver);
++ mipi_dsi_driver_unregister(&rpi_touchscreen_dsi_driver);
++}
++module_exit(rpi_touchscreen_exit);
+
+ MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+ MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver");
+--
+2.21.0
+
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
index 4271926e4..ffbf791e8 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
@@ -3,6 +3,15 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
require recipes-kernel/linux/linux-agl.inc
require recipes-kernel/linux/linux-agl-4.14.inc
+# ENABLE DSI
+# ported from https://github.com/k-quigley/linux
+SRC_URI_append = " \
+ file://dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch \
+ file://dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch \
+ file://dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch \
+ file://dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch \
+"
+
# NOTE: Kprobes need to be disabled until linux-raspberrypi gets updated
# to newer than 4.14.104 to avoid lttng-modules failing to build.
SRC_URI_append = "\