diff options
Diffstat (limited to 'meta-agl-bsp/meta-raspberrypi/recipes-kernel')
6 files changed, 2 insertions, 1099 deletions
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb index bed3062ee..7cc76c06e 100644 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb @@ -16,8 +16,8 @@ do_compile[depends] += "virtual/kernel:do_deploy" do_compile () { # Official touchscreen setup (rpi3b/rpi3b dtb, vc4-kms-v3d and ft5406) - fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo ${DEPLOY_DIR_IMAGE}/rpi-backlight.dtbo ${DEPLOY_DIR_IMAGE}/rpi-7inch.dtbo - fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo ${DEPLOY_DIR_IMAGE}/rpi-backlight.dtbo ${DEPLOY_DIR_IMAGE}/rpi-7inch.dtbo + fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo + fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo # HDMI screen setup (rpi3b/rpi3b dtb and vc4-kms-v3d) fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4.dtb ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch deleted file mode 100644 index fce687290..000000000 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch +++ /dev/null @@ -1,351 +0,0 @@ -From 380fd9f0da44ed62dff59a7c7e06f1190b58aa64 Mon Sep 17 00:00:00 2001 -From: Kevin Quigley <kevin@kquigley.co.uk> -Date: Mon, 24 Sep 2018 12:22:31 +0000 -Subject: [PATCH 1/4] Add devicetree support for RaspberryPi 7" panel over DSI - I2C - ---- - arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 5 +++ - arch/arm/boot/dts/bcm2708-rpi-b.dts | 6 +++ - arch/arm/boot/dts/bcm2708-rpi.dtsi | 21 ++++++++++ - arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 5 +++ - arch/arm/boot/dts/bcm270x.dtsi | 39 +++++++++++++++++ - arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 6 +++ - arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 5 +++ - arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 5 +++ - arch/arm/boot/dts/bcm2835-rpi-b.dts | 5 +++ - arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 + - arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 5 +++ - arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 5 +++ - arch/arm/boot/dts/bcm283x.dtsi | 16 ++++++- - arch/arm/boot/dts/overlays/Makefile | 1 + - .../boot/dts/overlays/rpi-7inch-overlay.dts | 42 +++++++++++++++++++ - 15 files changed, 167 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts - -diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -index ef0beea3a3a3..83b95b9a6ec3 100644 ---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts -@@ -121,3 +121,8 @@ - pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; - }; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 28 0 -+ &gpio 29 0>; -+}; -diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts -index dea70fae90e6..ea5de651d59d 100644 ---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts -@@ -111,3 +111,9 @@ - act_led_trigger = <&act_led>,"linux,default-trigger"; - }; - }; -+ -+ -+&i2c_dsi { -+ gpios = <&gpio 2 0 -+ &gpio 3 0>; -+}; -diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi -index b13632932192..2d8421f6681c 100644 ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -132,6 +132,27 @@ - power-domains = <&power RPI_POWER_DOMAIN_USB>; - }; - -+&v3d { -+ power-domains = <&power RPI_POWER_DOMAIN_V3D>; -+}; -+ -+&vec { -+ power-domains = <&power RPI_POWER_DOMAIN_VEC>; -+ status = "okay"; -+}; -+ -+&dsi0 { -+ power-domains = <&power RPI_POWER_DOMAIN_DSI0>; -+ status = "okay"; -+}; -+ -+&dsi1 { -+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; -+ status = "okay"; -+}; -+ -+ -+ - &clocks { - firmware = <&firmware>; - }; -diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -index 34659505055a..c23f79395791 100644 ---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts -@@ -122,3 +122,8 @@ - pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; - }; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 28 0 -+ &gpio 29 0>; -+}; -diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi -index f086ff0deec5..0b1ef47b18b0 100644 ---- a/arch/arm/boot/dts/bcm270x.dtsi -+++ b/arch/arm/boot/dts/bcm270x.dtsi -@@ -84,6 +84,26 @@ - status = "disabled"; - }; - -+ dsi1: dsi@7e700000 { -+ compatible = "brcm,bcm2835-dsi1"; -+ reg = <0x7e700000 0x8c>; -+ interrupts = <2 12>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #clock-cells = <1>; -+ -+ clocks = <&clocks BCM2835_PLLD_DSI1>, -+ <&clocks BCM2835_CLOCK_DSI1E>, -+ <&clocks BCM2835_CLOCK_DSI1P>; -+ clock-names = "phy", "escape", "pixel"; -+ -+ clock-output-names = "dsi1_byte", -+ "dsi1_ddr2", -+ "dsi1_ddr"; -+ -+ status = "disabled"; -+ }; -+ - firmwarekms: firmwarekms@7e600000 { - compatible = "raspberrypi,rpi-firmware-kms"; - /* SMI interrupt reg */ -@@ -93,6 +113,21 @@ - status = "disabled"; - }; - -+ i2c_dsi: i2cdsi { -+ /* We have to use i2c-gpio because the -+ * firmware is also polling another device -+ * using the only hardware I2C bus that could -+ * connect to these pins. -+ */ -+ compatible = "i2c-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ gpios = <&gpio 28 0 -+ &gpio 29 0>; -+ -+ }; -+ - smi: smi@7e600000 { - compatible = "brcm,bcm2835-smi"; - reg = <0x7e600000 0x100>; -@@ -187,3 +222,7 @@ - &vc4 { - status = "disabled"; - }; -+ -+&dsi1 { -+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>; -+}; -diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -index 37aed344cbbf..6ec9b28999f3 100644 ---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts -@@ -190,3 +190,9 @@ - pwr_led_trigger = <&pwr_led>,"linux,default-trigger"; - }; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 44 0 -+ &gpio 45 0>; -+}; -+ -diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -index a462de2ce37e..346efbd4a95f 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts -@@ -109,3 +109,8 @@ - pinctrl-0 = <&uart0_gpio14>; - status = "okay"; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 28 0 -+ &gpio 29 0>; -+}; -diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -index 264c84e94329..8b9ebf3670c2 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts -@@ -102,3 +102,8 @@ - pinctrl-0 = <&uart0_gpio14>; - status = "okay"; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 2 0 -+ &gpio 3 0>; -+}; -diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts -index 03e3a7a7dc5e..4020e79fc989 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi-b.dts -+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts -@@ -97,3 +97,8 @@ - pinctrl-0 = <&uart0_gpio14>; - status = "okay"; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 28 0 -+ &gpio 29 0>; -+}; -diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi -index 356d4e6a17e5..0599f0a27e5f 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -101,10 +101,12 @@ - - &dsi0 { - power-domains = <&power RPI_POWER_DOMAIN_DSI0>; -+ status = "okay"; - }; - - &dsi1 { - power-domains = <&power RPI_POWER_DOMAIN_DSI1>; -+ status = "okay"; - }; - - &csi0 { -diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -index 59e70f4a19e5..6c4c9c8d8ed0 100644 ---- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts -@@ -47,3 +47,8 @@ - pinctrl-0 = <&uart0_gpio14>; - status = "okay"; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 28 0 -+ &gpio 29 0>; -+}; -diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -index 8703d006a206..c99f70cefa61 100644 ---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -@@ -56,3 +56,8 @@ - status = "okay"; - bus-width = <4>; - }; -+ -+&i2c_dsi { -+ gpios = <&gpio 44 0 -+ &gpio 45 0>; -+}; -diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi -index 22eca6fad427..3ee99963f827 100644 ---- a/arch/arm/boot/dts/bcm283x.dtsi -+++ b/arch/arm/boot/dts/bcm283x.dtsi -@@ -551,7 +551,6 @@ - clock-output-names = "dsi1_byte", - "dsi1_ddr2", - "dsi1_ddr"; -- - status = "disabled"; - }; - -@@ -652,6 +651,21 @@ - vc4: gpu { - compatible = "brcm,bcm2835-vc4"; - }; -+ -+ i2c_dsi: i2cdsi { -+ /* We have to use i2c-gpio because the -+ * firmware is also polling another device -+ * using the only hardware I2C bus that could -+ * connect to these pins. -+ */ -+ compatible = "i2c-gpio"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ gpios = <&gpio 28 0 -+ &gpio 29 0>; -+ -+ }; - }; - - clocks { -diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile -index e0bdd84d21c5..f983d0180b8b 100644 ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -110,6 +110,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - rpi-cirrus-wm5102.dtbo \ - rpi-dac.dtbo \ - rpi-display.dtbo \ -+ rpi-7inch.dtbo \ - rpi-ft5406.dtbo \ - rpi-poe.dtbo \ - rpi-proto.dtbo \ -diff --git a/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts -new file mode 100644 -index 000000000000..3bb882d79086 ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts -@@ -0,0 +1,42 @@ -+/* -+ * Device Tree overlay for RaspberryPi 7" Touchscreen panel -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709"; -+ -+ fragment@1 { -+ target = <&dsi1>; -+ __overlay__ { -+ #address-cells = <1>; size-cells = <0>; -+ status = "okay"; -+ port { -+ dsi_out_port: endpoint { -+ remote-endpoint = <&panel_dsi_port>; -+ }; -+ }; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c_dsi>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ lcd@45 { -+ compatible = "raspberrypi,7inch-touchscreen-panel"; -+ reg = <0x45>; -+ port { -+ panel_dsi_port: endpoint { -+ remote-endpoint = <&dsi_out_port>; -+ }; -+ }; -+ }; -+ }; -+ }; -+}; --- -2.21.0 - diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch deleted file mode 100644 index 13d821418..000000000 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch +++ /dev/null @@ -1,102 +0,0 @@ -From ab06860f2361a3750ec3a62347e0fdd7873cb30d Mon Sep 17 00:00:00 2001 -From: Kevin Quigley <kevin@kquigley.co.uk> -Date: Mon, 24 Sep 2018 18:07:40 +0000 -Subject: [PATCH 2/4] drm/vc4: Make DSI call into the bridge after the DSI link - is enabled. bring this patch https://patchwork.kernel.org/patch/10480937/ to - Linux rpi-4.14.y - -This allows panels or bridges that need to send DSI commands during -pre_enable() to successfully send them. We delay DISP0 (aka the -actual display) enabling until after pre_enable so that pixels aren't -streaming before then. - -v2: Just clear out the encoder->bridge value to disable the midlayer - calls (idea by Andrzej Hajda). ---- - drivers/gpu/drm/vc4/vc4_dsi.c | 48 ++++++++++++++++++++++++----------- - 1 file changed, 33 insertions(+), 15 deletions(-) - -diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c -index a3f416cbd1d6..3fa2db18d70f 100644 ---- a/drivers/gpu/drm/vc4/vc4_dsi.c -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -814,7 +814,9 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder) - struct vc4_dsi *dsi = vc4_encoder->dsi; - struct device *dev = &dsi->pdev->dev; - -+ drm_bridge_disable(dsi->bridge); - vc4_dsi_ulps(dsi, true); -+ drm_bridge_post_disable(dsi->bridge); - - clk_disable_unprepare(dsi->pll_phy_clock); - clk_disable_unprepare(dsi->escape_clock); -@@ -1089,21 +1091,6 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) - /* Display reset sequence timeout */ - DSI_PORT_WRITE(PR_TO_CNT, 100000); - -- if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { -- DSI_PORT_WRITE(DISP0_CTRL, -- VC4_SET_FIELD(dsi->divider, -- DSI_DISP0_PIX_CLK_DIV) | -- VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) | -- VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME, -- DSI_DISP0_LP_STOP_CTRL) | -- DSI_DISP0_ST_END | -- DSI_DISP0_ENABLE); -- } else { -- DSI_PORT_WRITE(DISP0_CTRL, -- DSI_DISP0_COMMAND_MODE | -- DSI_DISP0_ENABLE); -- } -- - /* Set up DISP1 for transferring long command payloads through - * the pixfifo. - */ -@@ -1128,6 +1115,25 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder) - - vc4_dsi_ulps(dsi, false); - -+ drm_bridge_pre_enable(dsi->bridge); -+ -+ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) { -+ DSI_PORT_WRITE(DISP0_CTRL, -+ VC4_SET_FIELD(dsi->divider, -+ DSI_DISP0_PIX_CLK_DIV) | -+ VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) | -+ VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME, -+ DSI_DISP0_LP_STOP_CTRL) | -+ DSI_DISP0_ST_END | -+ DSI_DISP0_ENABLE); -+ } else { -+ DSI_PORT_WRITE(DISP0_CTRL, -+ DSI_DISP0_COMMAND_MODE | -+ DSI_DISP0_ENABLE); -+ } -+ -+ drm_bridge_enable(dsi->bridge); -+ - if (debug_dump_regs) { - DRM_INFO("DSI regs after:\n"); - vc4_dsi_dump_regs(dsi); -@@ -1656,6 +1662,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) - - dev_set_drvdata(dev, dsi); - -+ ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL); -+ if (ret) { -+ dev_err(dev, "bridge attach failed: %d\n", ret); -+ return ret; -+ } -+ /* Disable the atomic helper calls into the bridge. We -+ * manually call the bridge pre_enable / enable / etc. calls -+ * from our driver, since we need to sequence them within the -+ * encoder's enable/disable paths. -+ */ -+ dsi->encoder->bridge = NULL; -+ - pm_runtime_enable(dev); - - return 0; --- -2.21.0 - diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch deleted file mode 100644 index 0e6e068fe..000000000 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch +++ /dev/null @@ -1,217 +0,0 @@ -From 2ccd080392adfb1f077f2f4d289651b6b15e0951 Mon Sep 17 00:00:00 2001 -From: Kevin Quigley <kevin@kquigley.co.uk> -Date: Mon, 24 Sep 2018 18:09:52 +0000 -Subject: [PATCH 3/4] drm/vc4: Set up the DSI host at pdev probe time, not - component bind. bring https://patchwork.kernel.org/patch/9902623/ to Linux - 4.14.y - -We need the following things to happen in sequence: - -DSI host creation -DSI device creation in the panel driver (needs DSI host) -DSI device attach from panel to host. -DSI drm_panel_add() -DSI encoder creation -DSI encoder's DRM panel/bridge attach - -Unless we allow device creation while the host isn't up yet, we need -to break the -EPROBE_DEFER deadlock between the panel driver looking -up the host and the host driver looking up the panel. We can do so by -moving the DSI host creation outside of the component bind loop, and -the panel/bridge lookup/attach into the component bind process. ---- - drivers/gpu/drm/vc4/vc4_dsi.c | 93 ++++++++++++++++++++--------------- - 1 file changed, 53 insertions(+), 40 deletions(-) - -diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c -index 3fa2db18d70f..faf38f17ec26 100644 ---- a/drivers/gpu/drm/vc4/vc4_dsi.c -+++ b/drivers/gpu/drm/vc4/vc4_dsi.c -@@ -33,6 +33,7 @@ - #include <drm/drm_crtc_helper.h> - #include <drm/drm_edid.h> - #include <drm/drm_mipi_dsi.h> -+#include <drm/drm_of.h> - #include <drm/drm_panel.h> - #include <linux/clk.h> - #include <linux/clk-provider.h> -@@ -504,7 +505,6 @@ struct vc4_dsi { - struct mipi_dsi_host dsi_host; - struct drm_encoder *encoder; - struct drm_bridge *bridge; -- bool is_panel_bridge; - - void __iomem *regs; - -@@ -1300,7 +1300,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host, - struct mipi_dsi_device *device) - { - struct vc4_dsi *dsi = host_to_dsi(host); -- int ret = 0; - - dsi->lanes = device->lanes; - dsi->channel = device->channel; -@@ -1335,33 +1334,12 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host, - return 0; - } - -- dsi->bridge = of_drm_find_bridge(device->dev.of_node); -- if (!dsi->bridge) { -- struct drm_panel *panel = -- of_drm_find_panel(device->dev.of_node); -- -- dsi->bridge = drm_panel_bridge_add(panel, -- DRM_MODE_CONNECTOR_DSI); -- if (IS_ERR(dsi->bridge)) { -- ret = PTR_ERR(dsi->bridge); -- dsi->bridge = NULL; -- return ret; -- } -- dsi->is_panel_bridge = true; -- } -- -- return drm_bridge_attach(dsi->encoder, dsi->bridge, NULL); -+ return 0; - } - - static int vc4_dsi_host_detach(struct mipi_dsi_host *host, - struct mipi_dsi_device *device) - { -- struct vc4_dsi *dsi = host_to_dsi(host); -- -- if (dsi->is_panel_bridge) { -- drm_panel_bridge_remove(dsi->bridge); -- dsi->bridge = NULL; -- } - - return 0; - } -@@ -1525,16 +1503,13 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) - struct platform_device *pdev = to_platform_device(dev); - struct drm_device *drm = dev_get_drvdata(master); - struct vc4_dev *vc4 = to_vc4_dev(drm); -- struct vc4_dsi *dsi; -+ struct vc4_dsi *dsi = dev_get_drvdata(dev); - struct vc4_dsi_encoder *vc4_dsi_encoder; -+ struct drm_panel *panel; - const struct of_device_id *match; - dma_cap_mask_t dma_mask; - int ret; - -- dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); -- if (!dsi) -- return -ENOMEM; -- - match = of_match_device(vc4_dsi_dt_match, dev); - if (!match) - return -ENODEV; -@@ -1549,7 +1524,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) - vc4_dsi_encoder->dsi = dsi; - dsi->encoder = &vc4_dsi_encoder->base.base; - -- dsi->pdev = pdev; - dsi->regs = vc4_ioremap_regs(pdev, 0); - if (IS_ERR(dsi->regs)) - return PTR_ERR(dsi->regs); -@@ -1637,6 +1611,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) - return ret; - } - -+ ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, -+ &panel, &dsi->bridge); -+ if (ret) -+ return ret; -+ -+ if (panel) { -+ dsi->bridge = devm_drm_panel_bridge_add(dev, panel, -+ DRM_MODE_CONNECTOR_DSI); -+ if (IS_ERR(dsi->bridge)) -+ return PTR_ERR(dsi->bridge); -+ } -+ - /* The esc clock rate is supposed to always be 100Mhz. */ - ret = clk_set_rate(dsi->escape_clock, 100 * 1000000); - if (ret) { -@@ -1655,13 +1641,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) - DRM_MODE_ENCODER_DSI, NULL); - drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs); - -- dsi->dsi_host.ops = &vc4_dsi_host_ops; -- dsi->dsi_host.dev = dev; -- -- mipi_dsi_host_register(&dsi->dsi_host); -- -- dev_set_drvdata(dev, dsi); -- - ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL); - if (ret) { - dev_err(dev, "bridge attach failed: %d\n", ret); -@@ -1672,6 +1651,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data) - * from our driver, since we need to sequence them within the - * encoder's enable/disable paths. - */ -+ - dsi->encoder->bridge = NULL; - - pm_runtime_enable(dev); -@@ -1690,8 +1670,6 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master, - - vc4_dsi_encoder_destroy(dsi->encoder); - -- mipi_dsi_host_unregister(&dsi->dsi_host); -- - if (dsi->port == 1) - vc4->dsi1 = NULL; - } -@@ -1703,12 +1681,47 @@ static const struct component_ops vc4_dsi_ops = { - - static int vc4_dsi_dev_probe(struct platform_device *pdev) - { -- return component_add(&pdev->dev, &vc4_dsi_ops); -+ struct device *dev = &pdev->dev; -+ struct vc4_dsi *dsi; -+ int ret; -+ -+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL); -+ if (!dsi) -+ return -ENOMEM; -+ dev_set_drvdata(dev, dsi); -+ -+ dsi->pdev = pdev; -+ -+ /* Note, the initialization sequence for DSI and panels is -+ * tricky. The component bind above won't get past its -+ * -EPROBE_DEFER until the panel/bridge probes. The -+ * panel/bridge will return -EPROBE_DEFER until it has a -+ * mipi_dsi_host to register its device to. So, we register -+ * the host during pdev probe time, so vc4 as a whole can then -+ * -EPROBE_DEFER its component bind process until the panel -+ * successfully attaches. -+ */ -+ dsi->dsi_host.ops = &vc4_dsi_host_ops; -+ dsi->dsi_host.dev = dev; -+ mipi_dsi_host_register(&dsi->dsi_host); -+ -+ ret = component_add(&pdev->dev, &vc4_dsi_ops); -+ if (ret) { -+ mipi_dsi_host_unregister(&dsi->dsi_host); -+ return ret; -+ } -+ -+ return 0; - } - - static int vc4_dsi_dev_remove(struct platform_device *pdev) - { -+ struct device *dev = &pdev->dev; -+ struct vc4_dsi *dsi = dev_get_drvdata(dev); -+ - component_del(&pdev->dev, &vc4_dsi_ops); -+ mipi_dsi_host_unregister(&dsi->dsi_host); -+ - return 0; - } - --- -2.21.0 - diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch deleted file mode 100644 index 17c32750b..000000000 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch +++ /dev/null @@ -1,418 +0,0 @@ -From 7f745c7e13b50911424b9bbb4181d4dc72ef155f Mon Sep 17 00:00:00 2001 -From: Kevin Quigley <kevin@kquigley.co.uk> -Date: Mon, 24 Sep 2018 12:14:41 +0000 -Subject: [PATCH 4/4] drm/panel: Backport 4.15 support for the Raspberry Pi 7" - Touchscreen - ---- - .../drm/panel/panel-raspberrypi-touchscreen.c | 242 ++++++++---------- - 1 file changed, 111 insertions(+), 131 deletions(-) - -diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c -index 128523d8d518..2c9c9722734f 100644 ---- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c -+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c -@@ -1,5 +1,5 @@ - /* -- * Copyright © 2016 Broadcom -+ * Copyright © 2016-2017 Broadcom - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as -@@ -30,14 +30,15 @@ - */ - - /** -- * DOC: Raspberry Pi 7" touchscreen panel driver. -+ * Raspberry Pi 7" touchscreen panel driver. - * - * The 7" touchscreen consists of a DPI LCD panel, a Toshiba - * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR -- * controlling power management, the LCD PWM, and the touchscreen. -+ * controlling power management, the LCD PWM, and initial register -+ * setup of the Tohsiba. - * -- * This driver presents this device as a MIPI DSI panel to the DRM -- * driver, and should expose the touchscreen as a HID device. -+ * This driver controls the TC358762 and ATTINY88, presenting a DSI -+ * device with a drm_panel. - */ - - #include <linux/delay.h> -@@ -58,10 +59,12 @@ - #include <drm/drm_mipi_dsi.h> - #include <drm/drm_panel.h> - -+#define RPI_DSI_DRIVER_NAME "rpi-ts-dsi" -+ - /* I2C registers of the Atmel microcontroller. */ - enum REG_ADDR { - REG_ID = 0x80, -- REG_PORTA, // BIT(2) for horizontal flip, BIT(3) for vertical flip -+ REG_PORTA, /* BIT(2) for horizontal flip, BIT(3) for vertical flip */ - REG_PORTB, - REG_PORTC, - REG_PORTD, -@@ -81,9 +84,6 @@ enum REG_ADDR { - REG_ID2, - }; - --/* We only turn the PWM on or off, without varying values. */ --#define RPI_TOUCHSCREEN_MAX_BRIGHTNESS 1 -- - /* DSI D-PHY Layer Registers */ - #define D0W_DPHYCONTTX 0x0004 - #define CLW_DPHYCONTRX 0x0020 -@@ -100,8 +100,6 @@ enum REG_ADDR { - #define PPI_BUSYPPI 0x0108 - #define PPI_LINEINITCNT 0x0110 - #define PPI_LPTXTIMECNT 0x0114 --//#define PPI_LANEENABLE 0x0134 --//#define PPI_TX_RX_TA 0x013C - #define PPI_CLS_ATMR 0x0140 - #define PPI_D0S_ATMR 0x0144 - #define PPI_D1S_ATMR 0x0148 -@@ -197,43 +195,23 @@ enum REG_ADDR { - struct rpi_touchscreen { - struct drm_panel base; - struct mipi_dsi_device *dsi; -- struct i2c_client *bridge_i2c; -- -- /* Version of the firmware on the bridge chip */ -- int atmel_ver; -+ struct i2c_client *i2c; - }; - - static const struct drm_display_mode rpi_touchscreen_modes[] = { - { -- /* The DSI PLL can only integer divide from the 2Ghz -- * PLLD, giving us few choices. We pick a divide by 3 -- * as our DSI HS clock, giving us a pixel clock of -- * that divided by 24 bits. Pad out HFP to get our -- * panel to refresh at 60Hz, even if that doesn't -- * match the datasheet. -- */ --#define PIXEL_CLOCK ((2000000000 / 3) / 24) --#define VREFRESH 60 --#define VTOTAL (480 + 7 + 2 + 21) --#define HACT 800 --#define HSW 2 --#define HBP 46 --#define HFP ((PIXEL_CLOCK / (VTOTAL * VREFRESH)) - (HACT + HSW + HBP)) -- -- /* Round up the pixel clock a bit (10khz), so that the -- * "don't run things faster than the requested clock -- * rate" rule of the clk driver doesn't reject the -- * divide-by-3 mode due to rounding error. -+ /* Modeline comes from the Raspberry Pi firmware, with HFP=1 -+ * plugged in and clock re-computed from that. - */ -- .clock = PIXEL_CLOCK / 1000 + 10, -- .hdisplay = HACT, -- .hsync_start = HACT + HFP, -- .hsync_end = HACT + HFP + HSW, -- .htotal = HACT + HFP + HSW + HBP, -+ .clock = 25979400 / 1000, -+ .hdisplay = 800, -+ .hsync_start = 800 + 1, -+ .hsync_end = 800 + 1 + 2, -+ .htotal = 800 + 1 + 2 + 46, - .vdisplay = 480, - .vsync_start = 480 + 7, - .vsync_end = 480 + 7 + 2, -- .vtotal = VTOTAL, -+ .vtotal = 480 + 7 + 2 + 21, - .vrefresh = 60, - }, - }; -@@ -245,7 +223,7 @@ static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel) - - static int rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg) - { -- return i2c_smbus_read_byte_data(ts->bridge_i2c, reg); -+ return i2c_smbus_read_byte_data(ts->i2c, reg); - } - - static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts, -@@ -253,19 +231,13 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts, - { - int ret; - -- ret = i2c_smbus_write_byte_data(ts->bridge_i2c, reg, val); -+ ret = i2c_smbus_write_byte_data(ts->i2c, reg, val); - if (ret) - dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret); - } - - static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) - { --#if 0 -- /* The firmware uses LP DSI transactions like this to bring up -- * the hardware, which should be faster than using I2C to then -- * pass to the Toshiba. However, I was unable to get it to -- * work. -- */ - u8 msg[] = { - reg, - reg >> 8, -@@ -275,13 +247,7 @@ static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val) - val >> 24, - }; - -- mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg)); --#else -- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8); -- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg); -- rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8); -- rpi_touchscreen_i2c_write(ts, REG_WRITEL, val); --#endif -+ mipi_dsi_generic_write(ts->dsi, msg, sizeof(msg)); - - return 0; - } -@@ -317,8 +283,7 @@ static int rpi_touchscreen_enable(struct drm_panel *panel) - - rpi_touchscreen_write(ts, DSI_LANEENABLE, - DSI_LANEENABLE_CLOCK | -- DSI_LANEENABLE_D0 | -- (ts->dsi->lanes > 1 ? DSI_LANEENABLE_D1 : 0)); -+ DSI_LANEENABLE_D0); - rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05); - rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05); - rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00); -@@ -352,6 +317,7 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel) - struct drm_connector *connector = panel->connector; - struct drm_device *drm = panel->drm; - unsigned int i, num = 0; -+ static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; - - for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) { - const struct drm_display_mode *m = &rpi_touchscreen_modes[i]; -@@ -378,6 +344,8 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel) - connector->display_info.bpc = 8; - connector->display_info.width_mm = 154; - connector->display_info.height_mm = 86; -+ drm_display_info_set_bus_formats(&connector->display_info, -+ &bus_format, 1); - - return num; - } -@@ -390,51 +358,27 @@ static const struct drm_panel_funcs rpi_touchscreen_funcs = { - .get_modes = rpi_touchscreen_get_modes, - }; - --static struct i2c_client *rpi_touchscreen_get_i2c(struct device *dev, -- const char *name) --{ -- struct device_node *node; -- struct i2c_client *client; -- -- node = of_parse_phandle(dev->of_node, name, 0); -- if (!node) -- return ERR_PTR(-ENODEV); -- -- client = of_find_i2c_device_by_node(node); -- -- of_node_put(node); -- -- if (!client) -- return ERR_PTR(-EPROBE_DEFER); -- -- return client; --} -- --static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) -+static int rpi_touchscreen_probe(struct i2c_client *i2c, -+ const struct i2c_device_id *id) - { -- struct device *dev = &dsi->dev; -+ struct device *dev = &i2c->dev; - struct rpi_touchscreen *ts; -+ struct device_node *endpoint, *dsi_host_node; -+ struct mipi_dsi_host *host; - int ret, ver; -+ struct mipi_dsi_device_info info = { -+ .type = RPI_DSI_DRIVER_NAME, -+ .channel = 0, -+ .node = NULL, -+ }; - - ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); - if (!ts) - return -ENOMEM; - -- dev_set_drvdata(dev, ts); -+ i2c_set_clientdata(i2c, ts); - -- ts->dsi = dsi; -- dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | -- MIPI_DSI_MODE_VIDEO_SYNC_PULSE | -- MIPI_DSI_MODE_LPM); -- dsi->format = MIPI_DSI_FMT_RGB888; -- dsi->lanes = 1; -- -- ts->bridge_i2c = -- rpi_touchscreen_get_i2c(dev, "raspberrypi,touchscreen-bridge"); -- if (IS_ERR(ts->bridge_i2c)) { -- ret = -EPROBE_DEFER; -- return ret; -- } -+ ts->i2c = i2c; - - ver = rpi_touchscreen_i2c_read(ts, REG_ID); - if (ver < 0) { -@@ -443,11 +387,8 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) - } - - switch (ver) { -- case 0xde: -- ts->atmel_ver = 1; -- break; -- case 0xc3: -- ts->atmel_ver = 2; -+ case 0xde: /* ver 1 */ -+ case 0xc3: /* ver 2 */ - break; - default: - dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver); -@@ -457,65 +398,104 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) - /* Turn off at boot, so we can cleanly sequence powering on. */ - rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); - -- drm_panel_init(&ts->base); -+ /* Look up the DSI host. It needs to probe before we do. */ -+ endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); -+ dsi_host_node = of_graph_get_remote_port_parent(endpoint); -+ host = of_find_mipi_dsi_host_by_node(dsi_host_node); -+ of_node_put(dsi_host_node); -+ if (!host) { -+ of_node_put(endpoint); -+ return -EPROBE_DEFER; -+ } -+ -+ info.node = of_graph_get_remote_port(endpoint); -+ of_node_put(endpoint); -+ -+ ts->dsi = mipi_dsi_device_register_full(host, &info); -+ if (IS_ERR(ts->dsi)) { -+ dev_err(dev, "DSI device registration failed: %ld\n", -+ PTR_ERR(ts->dsi)); -+ return PTR_ERR(ts->dsi); -+ } -+ - ts->base.dev = dev; - ts->base.funcs = &rpi_touchscreen_funcs; - -+ /* This appears last, as it's what will unblock the DSI host -+ * driver's component bind function. -+ */ - ret = drm_panel_add(&ts->base); -- if (ret < 0) -- goto err_release_bridge; -- -- return mipi_dsi_attach(dsi); -+ if (ret) -+ return ret; - --err_release_bridge: -- put_device(&ts->bridge_i2c->dev); -- return ret; -+ return 0; - } - --static int rpi_touchscreen_dsi_remove(struct mipi_dsi_device *dsi) -+static int rpi_touchscreen_remove(struct i2c_client *i2c) - { -- struct device *dev = &dsi->dev; -- struct rpi_touchscreen *ts = dev_get_drvdata(dev); -- int ret; -+ struct rpi_touchscreen *ts = i2c_get_clientdata(i2c); - -- ret = mipi_dsi_detach(dsi); -- if (ret < 0) { -- dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret); -- return ret; -- } -+ mipi_dsi_detach(ts->dsi); - -- drm_panel_detach(&ts->base); - drm_panel_remove(&ts->base); - -- put_device(&ts->bridge_i2c->dev); -+ mipi_dsi_device_unregister(ts->dsi); -+ kfree(ts->dsi); - - return 0; - } - --static void rpi_touchscreen_dsi_shutdown(struct mipi_dsi_device *dsi) -+static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi) - { -- struct device *dev = &dsi->dev; -- struct rpi_touchscreen *ts = dev_get_drvdata(dev); -+ int ret; - -- rpi_touchscreen_i2c_write(ts, REG_POWERON, 0); -+ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | -+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE | -+ MIPI_DSI_MODE_LPM); -+ dsi->format = MIPI_DSI_FMT_RGB888; -+ dsi->lanes = 1; -+ -+ ret = mipi_dsi_attach(dsi); -+ -+ if (ret) -+ dev_err(&dsi->dev, "failed to attach dsi to host: %d\n", ret); -+ -+ return ret; - } - --static const struct of_device_id rpi_touchscreen_of_match[] = { -- { .compatible = "raspberrypi,touchscreen" }, -+static struct mipi_dsi_driver rpi_touchscreen_dsi_driver = { -+ .driver.name = RPI_DSI_DRIVER_NAME, -+ .probe = rpi_touchscreen_dsi_probe, -+}; -+ -+static const struct of_device_id rpi_touchscreen_of_ids[] = { -+ { .compatible = "raspberrypi,7inch-touchscreen-panel" }, - { } /* sentinel */ - }; --MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_match); -+MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_ids); - --static struct mipi_dsi_driver rpi_touchscreen_driver = { -+static struct i2c_driver rpi_touchscreen_driver = { - .driver = { -- .name = "raspberrypi-touchscreen", -- .of_match_table = rpi_touchscreen_of_match, -+ .name = "rpi_touchscreen", -+ .of_match_table = rpi_touchscreen_of_ids, - }, -- .probe = rpi_touchscreen_dsi_probe, -- .remove = rpi_touchscreen_dsi_remove, -- .shutdown = rpi_touchscreen_dsi_shutdown, -+ .probe = rpi_touchscreen_probe, -+ .remove = rpi_touchscreen_remove, - }; --module_mipi_dsi_driver(rpi_touchscreen_driver); -+ -+static int __init rpi_touchscreen_init(void) -+{ -+ mipi_dsi_driver_register(&rpi_touchscreen_dsi_driver); -+ return i2c_add_driver(&rpi_touchscreen_driver); -+} -+module_init(rpi_touchscreen_init); -+ -+static void __exit rpi_touchscreen_exit(void) -+{ -+ i2c_del_driver(&rpi_touchscreen_driver); -+ mipi_dsi_driver_unregister(&rpi_touchscreen_dsi_driver); -+} -+module_exit(rpi_touchscreen_exit); - - MODULE_AUTHOR("Eric Anholt <eric@anholt.net>"); - MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver"); --- -2.21.0 - diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend index ffbf791e8..4271926e4 100644 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend @@ -3,15 +3,6 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:" require recipes-kernel/linux/linux-agl.inc require recipes-kernel/linux/linux-agl-4.14.inc -# ENABLE DSI -# ported from https://github.com/k-quigley/linux -SRC_URI_append = " \ - file://dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch \ - file://dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch \ - file://dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch \ - file://dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch \ -" - # NOTE: Kprobes need to be disabled until linux-raspberrypi gets updated # to newer than 4.14.104 to avoid lttng-modules failing to build. SRC_URI_append = "\ |