aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-raspberrypi/recipes-kernel
diff options
context:
space:
mode:
Diffstat (limited to 'meta-agl-bsp/meta-raspberrypi/recipes-kernel')
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb4
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch351
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch102
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch217
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch418
-rw-r--r--meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend9
6 files changed, 2 insertions, 1099 deletions
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb
index bed3062ee..7cc76c06e 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/create-combined-dtb/create-combined-dtb_1.0.0.bb
@@ -16,8 +16,8 @@ do_compile[depends] += "virtual/kernel:do_deploy"
do_compile () {
# Official touchscreen setup (rpi3b/rpi3b dtb, vc4-kms-v3d and ft5406)
- fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo ${DEPLOY_DIR_IMAGE}/rpi-backlight.dtbo ${DEPLOY_DIR_IMAGE}/rpi-7inch.dtbo
- fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo ${DEPLOY_DIR_IMAGE}/rpi-backlight.dtbo ${DEPLOY_DIR_IMAGE}/rpi-7inch.dtbo
+ fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
+ fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b.dtb -o bcm2710-rpi-3+vc4+ft5406.dtb ${DEPLOY_DIR_IMAGE}/rpi-ft5406.dtbo ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
# HDMI screen setup (rpi3b/rpi3b dtb and vc4-kms-v3d)
fdtoverlay -v -i ${DEPLOY_DIR_IMAGE}/bcm2710-rpi-3-b-plus.dtb -o bcm2710-rpi-3-b+vc4.dtb ${DEPLOY_DIR_IMAGE}/vc4-kms-v3d.dtbo
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch
deleted file mode 100644
index fce687290..000000000
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch
+++ /dev/null
@@ -1,351 +0,0 @@
-From 380fd9f0da44ed62dff59a7c7e06f1190b58aa64 Mon Sep 17 00:00:00 2001
-From: Kevin Quigley <kevin@kquigley.co.uk>
-Date: Mon, 24 Sep 2018 12:22:31 +0000
-Subject: [PATCH 1/4] Add devicetree support for RaspberryPi 7" panel over DSI
- I2C
-
----
- arch/arm/boot/dts/bcm2708-rpi-b-plus.dts | 5 +++
- arch/arm/boot/dts/bcm2708-rpi-b.dts | 6 +++
- arch/arm/boot/dts/bcm2708-rpi.dtsi | 21 ++++++++++
- arch/arm/boot/dts/bcm2709-rpi-2-b.dts | 5 +++
- arch/arm/boot/dts/bcm270x.dtsi | 39 +++++++++++++++++
- arch/arm/boot/dts/bcm2710-rpi-3-b.dts | 6 +++
- arch/arm/boot/dts/bcm2835-rpi-b-plus.dts | 5 +++
- arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 5 +++
- arch/arm/boot/dts/bcm2835-rpi-b.dts | 5 +++
- arch/arm/boot/dts/bcm2835-rpi.dtsi | 2 +
- arch/arm/boot/dts/bcm2836-rpi-2-b.dts | 5 +++
- arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 5 +++
- arch/arm/boot/dts/bcm283x.dtsi | 16 ++++++-
- arch/arm/boot/dts/overlays/Makefile | 1 +
- .../boot/dts/overlays/rpi-7inch-overlay.dts | 42 +++++++++++++++++++
- 15 files changed, 167 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts
-
-diff --git a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-index ef0beea3a3a3..83b95b9a6ec3 100644
---- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
-@@ -121,3 +121,8 @@
- pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
- };
- };
-+
-+&i2c_dsi {
-+ gpios = <&gpio 28 0
-+ &gpio 29 0>;
-+};
-diff --git a/arch/arm/boot/dts/bcm2708-rpi-b.dts b/arch/arm/boot/dts/bcm2708-rpi-b.dts
-index dea70fae90e6..ea5de651d59d 100644
---- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
-@@ -111,3 +111,9 @@
- act_led_trigger = <&act_led>,"linux,default-trigger";
- };
- };
-+
-+
-+&i2c_dsi {
-+ gpios = <&gpio 2 0
-+ &gpio 3 0>;
-+};
-diff --git a/arch/arm/boot/dts/bcm2708-rpi.dtsi b/arch/arm/boot/dts/bcm2708-rpi.dtsi
-index b13632932192..2d8421f6681c 100644
---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi
-@@ -132,6 +132,27 @@
- power-domains = <&power RPI_POWER_DOMAIN_USB>;
- };
-
-+&v3d {
-+ power-domains = <&power RPI_POWER_DOMAIN_V3D>;
-+};
-+
-+&vec {
-+ power-domains = <&power RPI_POWER_DOMAIN_VEC>;
-+ status = "okay";
-+};
-+
-+&dsi0 {
-+ power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
-+ status = "okay";
-+};
-+
-+&dsi1 {
-+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-+ status = "okay";
-+};
-+
-+
-+
- &clocks {
- firmware = <&firmware>;
- };
-diff --git a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-index 34659505055a..c23f79395791 100644
---- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
-@@ -122,3 +122,8 @@
- pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
- };
- };
-+
-+&i2c_dsi {
-+ gpios = <&gpio 28 0
-+ &gpio 29 0>;
-+};
-diff --git a/arch/arm/boot/dts/bcm270x.dtsi b/arch/arm/boot/dts/bcm270x.dtsi
-index f086ff0deec5..0b1ef47b18b0 100644
---- a/arch/arm/boot/dts/bcm270x.dtsi
-+++ b/arch/arm/boot/dts/bcm270x.dtsi
-@@ -84,6 +84,26 @@
- status = "disabled";
- };
-
-+ dsi1: dsi@7e700000 {
-+ compatible = "brcm,bcm2835-dsi1";
-+ reg = <0x7e700000 0x8c>;
-+ interrupts = <2 12>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ #clock-cells = <1>;
-+
-+ clocks = <&clocks BCM2835_PLLD_DSI1>,
-+ <&clocks BCM2835_CLOCK_DSI1E>,
-+ <&clocks BCM2835_CLOCK_DSI1P>;
-+ clock-names = "phy", "escape", "pixel";
-+
-+ clock-output-names = "dsi1_byte",
-+ "dsi1_ddr2",
-+ "dsi1_ddr";
-+
-+ status = "disabled";
-+ };
-+
- firmwarekms: firmwarekms@7e600000 {
- compatible = "raspberrypi,rpi-firmware-kms";
- /* SMI interrupt reg */
-@@ -93,6 +113,21 @@
- status = "disabled";
- };
-
-+ i2c_dsi: i2cdsi {
-+ /* We have to use i2c-gpio because the
-+ * firmware is also polling another device
-+ * using the only hardware I2C bus that could
-+ * connect to these pins.
-+ */
-+ compatible = "i2c-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ gpios = <&gpio 28 0
-+ &gpio 29 0>;
-+
-+ };
-+
- smi: smi@7e600000 {
- compatible = "brcm,bcm2835-smi";
- reg = <0x7e600000 0x100>;
-@@ -187,3 +222,7 @@
- &vc4 {
- status = "disabled";
- };
-+
-+&dsi1 {
-+ power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-+};
-diff --git a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-index 37aed344cbbf..6ec9b28999f3 100644
---- a/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2710-rpi-3-b.dts
-@@ -190,3 +190,9 @@
- pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
- };
- };
-+
-+&i2c_dsi {
-+ gpios = <&gpio 44 0
-+ &gpio 45 0>;
-+};
-+
-diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-index a462de2ce37e..346efbd4a95f 100644
---- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
-@@ -109,3 +109,8 @@
- pinctrl-0 = <&uart0_gpio14>;
- status = "okay";
- };
-+
-+&i2c_dsi {
-+ gpios = <&gpio 28 0
-+ &gpio 29 0>;
-+};
-diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-index 264c84e94329..8b9ebf3670c2 100644
---- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
-@@ -102,3 +102,8 @@
- pinctrl-0 = <&uart0_gpio14>;
- status = "okay";
- };
-+
-+&i2c_dsi {
-+ gpios = <&gpio 2 0
-+ &gpio 3 0>;
-+};
-diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
-index 03e3a7a7dc5e..4020e79fc989 100644
---- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
-+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
-@@ -97,3 +97,8 @@
- pinctrl-0 = <&uart0_gpio14>;
- status = "okay";
- };
-+
-+&i2c_dsi {
-+ gpios = <&gpio 28 0
-+ &gpio 29 0>;
-+};
-diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
-index 356d4e6a17e5..0599f0a27e5f 100644
---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
-+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
-@@ -101,10 +101,12 @@
-
- &dsi0 {
- power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
-+ status = "okay";
- };
-
- &dsi1 {
- power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
-+ status = "okay";
- };
-
- &csi0 {
-diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-index 59e70f4a19e5..6c4c9c8d8ed0 100644
---- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
-@@ -47,3 +47,8 @@
- pinctrl-0 = <&uart0_gpio14>;
- status = "okay";
- };
-+
-+&i2c_dsi {
-+ gpios = <&gpio 28 0
-+ &gpio 29 0>;
-+};
-diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-index 8703d006a206..c99f70cefa61 100644
---- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
-@@ -56,3 +56,8 @@
- status = "okay";
- bus-width = <4>;
- };
-+
-+&i2c_dsi {
-+ gpios = <&gpio 44 0
-+ &gpio 45 0>;
-+};
-diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
-index 22eca6fad427..3ee99963f827 100644
---- a/arch/arm/boot/dts/bcm283x.dtsi
-+++ b/arch/arm/boot/dts/bcm283x.dtsi
-@@ -551,7 +551,6 @@
- clock-output-names = "dsi1_byte",
- "dsi1_ddr2",
- "dsi1_ddr";
--
- status = "disabled";
- };
-
-@@ -652,6 +651,21 @@
- vc4: gpu {
- compatible = "brcm,bcm2835-vc4";
- };
-+
-+ i2c_dsi: i2cdsi {
-+ /* We have to use i2c-gpio because the
-+ * firmware is also polling another device
-+ * using the only hardware I2C bus that could
-+ * connect to these pins.
-+ */
-+ compatible = "i2c-gpio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ gpios = <&gpio 28 0
-+ &gpio 29 0>;
-+
-+ };
- };
-
- clocks {
-diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
-index e0bdd84d21c5..f983d0180b8b 100644
---- a/arch/arm/boot/dts/overlays/Makefile
-+++ b/arch/arm/boot/dts/overlays/Makefile
-@@ -110,6 +110,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
- rpi-cirrus-wm5102.dtbo \
- rpi-dac.dtbo \
- rpi-display.dtbo \
-+ rpi-7inch.dtbo \
- rpi-ft5406.dtbo \
- rpi-poe.dtbo \
- rpi-proto.dtbo \
-diff --git a/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts
-new file mode 100644
-index 000000000000..3bb882d79086
---- /dev/null
-+++ b/arch/arm/boot/dts/overlays/rpi-7inch-overlay.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Device Tree overlay for RaspberryPi 7" Touchscreen panel
-+ *
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
-+
-+ fragment@1 {
-+ target = <&dsi1>;
-+ __overlay__ {
-+ #address-cells = <1>; size-cells = <0>;
-+ status = "okay";
-+ port {
-+ dsi_out_port: endpoint {
-+ remote-endpoint = <&panel_dsi_port>;
-+ };
-+ };
-+ };
-+ };
-+
-+ fragment@2 {
-+ target = <&i2c_dsi>;
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "okay";
-+ lcd@45 {
-+ compatible = "raspberrypi,7inch-touchscreen-panel";
-+ reg = <0x45>;
-+ port {
-+ panel_dsi_port: endpoint {
-+ remote-endpoint = <&dsi_out_port>;
-+ };
-+ };
-+ };
-+ };
-+ };
-+};
---
-2.21.0
-
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch
deleted file mode 100644
index 13d821418..000000000
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From ab06860f2361a3750ec3a62347e0fdd7873cb30d Mon Sep 17 00:00:00 2001
-From: Kevin Quigley <kevin@kquigley.co.uk>
-Date: Mon, 24 Sep 2018 18:07:40 +0000
-Subject: [PATCH 2/4] drm/vc4: Make DSI call into the bridge after the DSI link
- is enabled. bring this patch https://patchwork.kernel.org/patch/10480937/ to
- Linux rpi-4.14.y
-
-This allows panels or bridges that need to send DSI commands during
-pre_enable() to successfully send them. We delay DISP0 (aka the
-actual display) enabling until after pre_enable so that pixels aren't
-streaming before then.
-
-v2: Just clear out the encoder->bridge value to disable the midlayer
- calls (idea by Andrzej Hajda).
----
- drivers/gpu/drm/vc4/vc4_dsi.c | 48 ++++++++++++++++++++++++-----------
- 1 file changed, 33 insertions(+), 15 deletions(-)
-
-diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
-index a3f416cbd1d6..3fa2db18d70f 100644
---- a/drivers/gpu/drm/vc4/vc4_dsi.c
-+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
-@@ -814,7 +814,9 @@ static void vc4_dsi_encoder_disable(struct drm_encoder *encoder)
- struct vc4_dsi *dsi = vc4_encoder->dsi;
- struct device *dev = &dsi->pdev->dev;
-
-+ drm_bridge_disable(dsi->bridge);
- vc4_dsi_ulps(dsi, true);
-+ drm_bridge_post_disable(dsi->bridge);
-
- clk_disable_unprepare(dsi->pll_phy_clock);
- clk_disable_unprepare(dsi->escape_clock);
-@@ -1089,21 +1091,6 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
- /* Display reset sequence timeout */
- DSI_PORT_WRITE(PR_TO_CNT, 100000);
-
-- if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
-- DSI_PORT_WRITE(DISP0_CTRL,
-- VC4_SET_FIELD(dsi->divider,
-- DSI_DISP0_PIX_CLK_DIV) |
-- VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) |
-- VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME,
-- DSI_DISP0_LP_STOP_CTRL) |
-- DSI_DISP0_ST_END |
-- DSI_DISP0_ENABLE);
-- } else {
-- DSI_PORT_WRITE(DISP0_CTRL,
-- DSI_DISP0_COMMAND_MODE |
-- DSI_DISP0_ENABLE);
-- }
--
- /* Set up DISP1 for transferring long command payloads through
- * the pixfifo.
- */
-@@ -1128,6 +1115,25 @@ static void vc4_dsi_encoder_enable(struct drm_encoder *encoder)
-
- vc4_dsi_ulps(dsi, false);
-
-+ drm_bridge_pre_enable(dsi->bridge);
-+
-+ if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
-+ DSI_PORT_WRITE(DISP0_CTRL,
-+ VC4_SET_FIELD(dsi->divider,
-+ DSI_DISP0_PIX_CLK_DIV) |
-+ VC4_SET_FIELD(dsi->format, DSI_DISP0_PFORMAT) |
-+ VC4_SET_FIELD(DSI_DISP0_LP_STOP_PERFRAME,
-+ DSI_DISP0_LP_STOP_CTRL) |
-+ DSI_DISP0_ST_END |
-+ DSI_DISP0_ENABLE);
-+ } else {
-+ DSI_PORT_WRITE(DISP0_CTRL,
-+ DSI_DISP0_COMMAND_MODE |
-+ DSI_DISP0_ENABLE);
-+ }
-+
-+ drm_bridge_enable(dsi->bridge);
-+
- if (debug_dump_regs) {
- DRM_INFO("DSI regs after:\n");
- vc4_dsi_dump_regs(dsi);
-@@ -1656,6 +1662,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
-
- dev_set_drvdata(dev, dsi);
-
-+ ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
-+ if (ret) {
-+ dev_err(dev, "bridge attach failed: %d\n", ret);
-+ return ret;
-+ }
-+ /* Disable the atomic helper calls into the bridge. We
-+ * manually call the bridge pre_enable / enable / etc. calls
-+ * from our driver, since we need to sequence them within the
-+ * encoder's enable/disable paths.
-+ */
-+ dsi->encoder->bridge = NULL;
-+
- pm_runtime_enable(dev);
-
- return 0;
---
-2.21.0
-
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch
deleted file mode 100644
index 0e6e068fe..000000000
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch
+++ /dev/null
@@ -1,217 +0,0 @@
-From 2ccd080392adfb1f077f2f4d289651b6b15e0951 Mon Sep 17 00:00:00 2001
-From: Kevin Quigley <kevin@kquigley.co.uk>
-Date: Mon, 24 Sep 2018 18:09:52 +0000
-Subject: [PATCH 3/4] drm/vc4: Set up the DSI host at pdev probe time, not
- component bind. bring https://patchwork.kernel.org/patch/9902623/ to Linux
- 4.14.y
-
-We need the following things to happen in sequence:
-
-DSI host creation
-DSI device creation in the panel driver (needs DSI host)
-DSI device attach from panel to host.
-DSI drm_panel_add()
-DSI encoder creation
-DSI encoder's DRM panel/bridge attach
-
-Unless we allow device creation while the host isn't up yet, we need
-to break the -EPROBE_DEFER deadlock between the panel driver looking
-up the host and the host driver looking up the panel. We can do so by
-moving the DSI host creation outside of the component bind loop, and
-the panel/bridge lookup/attach into the component bind process.
----
- drivers/gpu/drm/vc4/vc4_dsi.c | 93 ++++++++++++++++++++---------------
- 1 file changed, 53 insertions(+), 40 deletions(-)
-
-diff --git a/drivers/gpu/drm/vc4/vc4_dsi.c b/drivers/gpu/drm/vc4/vc4_dsi.c
-index 3fa2db18d70f..faf38f17ec26 100644
---- a/drivers/gpu/drm/vc4/vc4_dsi.c
-+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
-@@ -33,6 +33,7 @@
- #include <drm/drm_crtc_helper.h>
- #include <drm/drm_edid.h>
- #include <drm/drm_mipi_dsi.h>
-+#include <drm/drm_of.h>
- #include <drm/drm_panel.h>
- #include <linux/clk.h>
- #include <linux/clk-provider.h>
-@@ -504,7 +505,6 @@ struct vc4_dsi {
- struct mipi_dsi_host dsi_host;
- struct drm_encoder *encoder;
- struct drm_bridge *bridge;
-- bool is_panel_bridge;
-
- void __iomem *regs;
-
-@@ -1300,7 +1300,6 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
- struct mipi_dsi_device *device)
- {
- struct vc4_dsi *dsi = host_to_dsi(host);
-- int ret = 0;
-
- dsi->lanes = device->lanes;
- dsi->channel = device->channel;
-@@ -1335,33 +1334,12 @@ static int vc4_dsi_host_attach(struct mipi_dsi_host *host,
- return 0;
- }
-
-- dsi->bridge = of_drm_find_bridge(device->dev.of_node);
-- if (!dsi->bridge) {
-- struct drm_panel *panel =
-- of_drm_find_panel(device->dev.of_node);
--
-- dsi->bridge = drm_panel_bridge_add(panel,
-- DRM_MODE_CONNECTOR_DSI);
-- if (IS_ERR(dsi->bridge)) {
-- ret = PTR_ERR(dsi->bridge);
-- dsi->bridge = NULL;
-- return ret;
-- }
-- dsi->is_panel_bridge = true;
-- }
--
-- return drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
-+ return 0;
- }
-
- static int vc4_dsi_host_detach(struct mipi_dsi_host *host,
- struct mipi_dsi_device *device)
- {
-- struct vc4_dsi *dsi = host_to_dsi(host);
--
-- if (dsi->is_panel_bridge) {
-- drm_panel_bridge_remove(dsi->bridge);
-- dsi->bridge = NULL;
-- }
-
- return 0;
- }
-@@ -1525,16 +1503,13 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
- struct platform_device *pdev = to_platform_device(dev);
- struct drm_device *drm = dev_get_drvdata(master);
- struct vc4_dev *vc4 = to_vc4_dev(drm);
-- struct vc4_dsi *dsi;
-+ struct vc4_dsi *dsi = dev_get_drvdata(dev);
- struct vc4_dsi_encoder *vc4_dsi_encoder;
-+ struct drm_panel *panel;
- const struct of_device_id *match;
- dma_cap_mask_t dma_mask;
- int ret;
-
-- dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
-- if (!dsi)
-- return -ENOMEM;
--
- match = of_match_device(vc4_dsi_dt_match, dev);
- if (!match)
- return -ENODEV;
-@@ -1549,7 +1524,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
- vc4_dsi_encoder->dsi = dsi;
- dsi->encoder = &vc4_dsi_encoder->base.base;
-
-- dsi->pdev = pdev;
- dsi->regs = vc4_ioremap_regs(pdev, 0);
- if (IS_ERR(dsi->regs))
- return PTR_ERR(dsi->regs);
-@@ -1637,6 +1611,18 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
- return ret;
- }
-
-+ ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
-+ &panel, &dsi->bridge);
-+ if (ret)
-+ return ret;
-+
-+ if (panel) {
-+ dsi->bridge = devm_drm_panel_bridge_add(dev, panel,
-+ DRM_MODE_CONNECTOR_DSI);
-+ if (IS_ERR(dsi->bridge))
-+ return PTR_ERR(dsi->bridge);
-+ }
-+
- /* The esc clock rate is supposed to always be 100Mhz. */
- ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
- if (ret) {
-@@ -1655,13 +1641,6 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
- DRM_MODE_ENCODER_DSI, NULL);
- drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs);
-
-- dsi->dsi_host.ops = &vc4_dsi_host_ops;
-- dsi->dsi_host.dev = dev;
--
-- mipi_dsi_host_register(&dsi->dsi_host);
--
-- dev_set_drvdata(dev, dsi);
--
- ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL);
- if (ret) {
- dev_err(dev, "bridge attach failed: %d\n", ret);
-@@ -1672,6 +1651,7 @@ static int vc4_dsi_bind(struct device *dev, struct device *master, void *data)
- * from our driver, since we need to sequence them within the
- * encoder's enable/disable paths.
- */
-+
- dsi->encoder->bridge = NULL;
-
- pm_runtime_enable(dev);
-@@ -1690,8 +1670,6 @@ static void vc4_dsi_unbind(struct device *dev, struct device *master,
-
- vc4_dsi_encoder_destroy(dsi->encoder);
-
-- mipi_dsi_host_unregister(&dsi->dsi_host);
--
- if (dsi->port == 1)
- vc4->dsi1 = NULL;
- }
-@@ -1703,12 +1681,47 @@ static const struct component_ops vc4_dsi_ops = {
-
- static int vc4_dsi_dev_probe(struct platform_device *pdev)
- {
-- return component_add(&pdev->dev, &vc4_dsi_ops);
-+ struct device *dev = &pdev->dev;
-+ struct vc4_dsi *dsi;
-+ int ret;
-+
-+ dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
-+ if (!dsi)
-+ return -ENOMEM;
-+ dev_set_drvdata(dev, dsi);
-+
-+ dsi->pdev = pdev;
-+
-+ /* Note, the initialization sequence for DSI and panels is
-+ * tricky. The component bind above won't get past its
-+ * -EPROBE_DEFER until the panel/bridge probes. The
-+ * panel/bridge will return -EPROBE_DEFER until it has a
-+ * mipi_dsi_host to register its device to. So, we register
-+ * the host during pdev probe time, so vc4 as a whole can then
-+ * -EPROBE_DEFER its component bind process until the panel
-+ * successfully attaches.
-+ */
-+ dsi->dsi_host.ops = &vc4_dsi_host_ops;
-+ dsi->dsi_host.dev = dev;
-+ mipi_dsi_host_register(&dsi->dsi_host);
-+
-+ ret = component_add(&pdev->dev, &vc4_dsi_ops);
-+ if (ret) {
-+ mipi_dsi_host_unregister(&dsi->dsi_host);
-+ return ret;
-+ }
-+
-+ return 0;
- }
-
- static int vc4_dsi_dev_remove(struct platform_device *pdev)
- {
-+ struct device *dev = &pdev->dev;
-+ struct vc4_dsi *dsi = dev_get_drvdata(dev);
-+
- component_del(&pdev->dev, &vc4_dsi_ops);
-+ mipi_dsi_host_unregister(&dsi->dsi_host);
-+
- return 0;
- }
-
---
-2.21.0
-
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch
deleted file mode 100644
index 17c32750b..000000000
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi/dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch
+++ /dev/null
@@ -1,418 +0,0 @@
-From 7f745c7e13b50911424b9bbb4181d4dc72ef155f Mon Sep 17 00:00:00 2001
-From: Kevin Quigley <kevin@kquigley.co.uk>
-Date: Mon, 24 Sep 2018 12:14:41 +0000
-Subject: [PATCH 4/4] drm/panel: Backport 4.15 support for the Raspberry Pi 7"
- Touchscreen
-
----
- .../drm/panel/panel-raspberrypi-touchscreen.c | 242 ++++++++----------
- 1 file changed, 111 insertions(+), 131 deletions(-)
-
-diff --git a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
-index 128523d8d518..2c9c9722734f 100644
---- a/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
-+++ b/drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright © 2016 Broadcom
-+ * Copyright © 2016-2017 Broadcom
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
-@@ -30,14 +30,15 @@
- */
-
- /**
-- * DOC: Raspberry Pi 7" touchscreen panel driver.
-+ * Raspberry Pi 7" touchscreen panel driver.
- *
- * The 7" touchscreen consists of a DPI LCD panel, a Toshiba
- * TC358762XBG DSI-DPI bridge, and an I2C-connected Atmel ATTINY88-MUR
-- * controlling power management, the LCD PWM, and the touchscreen.
-+ * controlling power management, the LCD PWM, and initial register
-+ * setup of the Tohsiba.
- *
-- * This driver presents this device as a MIPI DSI panel to the DRM
-- * driver, and should expose the touchscreen as a HID device.
-+ * This driver controls the TC358762 and ATTINY88, presenting a DSI
-+ * device with a drm_panel.
- */
-
- #include <linux/delay.h>
-@@ -58,10 +59,12 @@
- #include <drm/drm_mipi_dsi.h>
- #include <drm/drm_panel.h>
-
-+#define RPI_DSI_DRIVER_NAME "rpi-ts-dsi"
-+
- /* I2C registers of the Atmel microcontroller. */
- enum REG_ADDR {
- REG_ID = 0x80,
-- REG_PORTA, // BIT(2) for horizontal flip, BIT(3) for vertical flip
-+ REG_PORTA, /* BIT(2) for horizontal flip, BIT(3) for vertical flip */
- REG_PORTB,
- REG_PORTC,
- REG_PORTD,
-@@ -81,9 +84,6 @@ enum REG_ADDR {
- REG_ID2,
- };
-
--/* We only turn the PWM on or off, without varying values. */
--#define RPI_TOUCHSCREEN_MAX_BRIGHTNESS 1
--
- /* DSI D-PHY Layer Registers */
- #define D0W_DPHYCONTTX 0x0004
- #define CLW_DPHYCONTRX 0x0020
-@@ -100,8 +100,6 @@ enum REG_ADDR {
- #define PPI_BUSYPPI 0x0108
- #define PPI_LINEINITCNT 0x0110
- #define PPI_LPTXTIMECNT 0x0114
--//#define PPI_LANEENABLE 0x0134
--//#define PPI_TX_RX_TA 0x013C
- #define PPI_CLS_ATMR 0x0140
- #define PPI_D0S_ATMR 0x0144
- #define PPI_D1S_ATMR 0x0148
-@@ -197,43 +195,23 @@ enum REG_ADDR {
- struct rpi_touchscreen {
- struct drm_panel base;
- struct mipi_dsi_device *dsi;
-- struct i2c_client *bridge_i2c;
--
-- /* Version of the firmware on the bridge chip */
-- int atmel_ver;
-+ struct i2c_client *i2c;
- };
-
- static const struct drm_display_mode rpi_touchscreen_modes[] = {
- {
-- /* The DSI PLL can only integer divide from the 2Ghz
-- * PLLD, giving us few choices. We pick a divide by 3
-- * as our DSI HS clock, giving us a pixel clock of
-- * that divided by 24 bits. Pad out HFP to get our
-- * panel to refresh at 60Hz, even if that doesn't
-- * match the datasheet.
-- */
--#define PIXEL_CLOCK ((2000000000 / 3) / 24)
--#define VREFRESH 60
--#define VTOTAL (480 + 7 + 2 + 21)
--#define HACT 800
--#define HSW 2
--#define HBP 46
--#define HFP ((PIXEL_CLOCK / (VTOTAL * VREFRESH)) - (HACT + HSW + HBP))
--
-- /* Round up the pixel clock a bit (10khz), so that the
-- * "don't run things faster than the requested clock
-- * rate" rule of the clk driver doesn't reject the
-- * divide-by-3 mode due to rounding error.
-+ /* Modeline comes from the Raspberry Pi firmware, with HFP=1
-+ * plugged in and clock re-computed from that.
- */
-- .clock = PIXEL_CLOCK / 1000 + 10,
-- .hdisplay = HACT,
-- .hsync_start = HACT + HFP,
-- .hsync_end = HACT + HFP + HSW,
-- .htotal = HACT + HFP + HSW + HBP,
-+ .clock = 25979400 / 1000,
-+ .hdisplay = 800,
-+ .hsync_start = 800 + 1,
-+ .hsync_end = 800 + 1 + 2,
-+ .htotal = 800 + 1 + 2 + 46,
- .vdisplay = 480,
- .vsync_start = 480 + 7,
- .vsync_end = 480 + 7 + 2,
-- .vtotal = VTOTAL,
-+ .vtotal = 480 + 7 + 2 + 21,
- .vrefresh = 60,
- },
- };
-@@ -245,7 +223,7 @@ static struct rpi_touchscreen *panel_to_ts(struct drm_panel *panel)
-
- static int rpi_touchscreen_i2c_read(struct rpi_touchscreen *ts, u8 reg)
- {
-- return i2c_smbus_read_byte_data(ts->bridge_i2c, reg);
-+ return i2c_smbus_read_byte_data(ts->i2c, reg);
- }
-
- static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
-@@ -253,19 +231,13 @@ static void rpi_touchscreen_i2c_write(struct rpi_touchscreen *ts,
- {
- int ret;
-
-- ret = i2c_smbus_write_byte_data(ts->bridge_i2c, reg, val);
-+ ret = i2c_smbus_write_byte_data(ts->i2c, reg, val);
- if (ret)
- dev_err(&ts->dsi->dev, "I2C write failed: %d\n", ret);
- }
-
- static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
- {
--#if 0
-- /* The firmware uses LP DSI transactions like this to bring up
-- * the hardware, which should be faster than using I2C to then
-- * pass to the Toshiba. However, I was unable to get it to
-- * work.
-- */
- u8 msg[] = {
- reg,
- reg >> 8,
-@@ -275,13 +247,7 @@ static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
- val >> 24,
- };
-
-- mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg));
--#else
-- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8);
-- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg);
-- rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8);
-- rpi_touchscreen_i2c_write(ts, REG_WRITEL, val);
--#endif
-+ mipi_dsi_generic_write(ts->dsi, msg, sizeof(msg));
-
- return 0;
- }
-@@ -317,8 +283,7 @@ static int rpi_touchscreen_enable(struct drm_panel *panel)
-
- rpi_touchscreen_write(ts, DSI_LANEENABLE,
- DSI_LANEENABLE_CLOCK |
-- DSI_LANEENABLE_D0 |
-- (ts->dsi->lanes > 1 ? DSI_LANEENABLE_D1 : 0));
-+ DSI_LANEENABLE_D0);
- rpi_touchscreen_write(ts, PPI_D0S_CLRSIPOCOUNT, 0x05);
- rpi_touchscreen_write(ts, PPI_D1S_CLRSIPOCOUNT, 0x05);
- rpi_touchscreen_write(ts, PPI_D0S_ATMR, 0x00);
-@@ -352,6 +317,7 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel)
- struct drm_connector *connector = panel->connector;
- struct drm_device *drm = panel->drm;
- unsigned int i, num = 0;
-+ static const u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
-
- for (i = 0; i < ARRAY_SIZE(rpi_touchscreen_modes); i++) {
- const struct drm_display_mode *m = &rpi_touchscreen_modes[i];
-@@ -378,6 +344,8 @@ static int rpi_touchscreen_get_modes(struct drm_panel *panel)
- connector->display_info.bpc = 8;
- connector->display_info.width_mm = 154;
- connector->display_info.height_mm = 86;
-+ drm_display_info_set_bus_formats(&connector->display_info,
-+ &bus_format, 1);
-
- return num;
- }
-@@ -390,51 +358,27 @@ static const struct drm_panel_funcs rpi_touchscreen_funcs = {
- .get_modes = rpi_touchscreen_get_modes,
- };
-
--static struct i2c_client *rpi_touchscreen_get_i2c(struct device *dev,
-- const char *name)
--{
-- struct device_node *node;
-- struct i2c_client *client;
--
-- node = of_parse_phandle(dev->of_node, name, 0);
-- if (!node)
-- return ERR_PTR(-ENODEV);
--
-- client = of_find_i2c_device_by_node(node);
--
-- of_node_put(node);
--
-- if (!client)
-- return ERR_PTR(-EPROBE_DEFER);
--
-- return client;
--}
--
--static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
-+static int rpi_touchscreen_probe(struct i2c_client *i2c,
-+ const struct i2c_device_id *id)
- {
-- struct device *dev = &dsi->dev;
-+ struct device *dev = &i2c->dev;
- struct rpi_touchscreen *ts;
-+ struct device_node *endpoint, *dsi_host_node;
-+ struct mipi_dsi_host *host;
- int ret, ver;
-+ struct mipi_dsi_device_info info = {
-+ .type = RPI_DSI_DRIVER_NAME,
-+ .channel = 0,
-+ .node = NULL,
-+ };
-
- ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
- if (!ts)
- return -ENOMEM;
-
-- dev_set_drvdata(dev, ts);
-+ i2c_set_clientdata(i2c, ts);
-
-- ts->dsi = dsi;
-- dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
-- MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
-- MIPI_DSI_MODE_LPM);
-- dsi->format = MIPI_DSI_FMT_RGB888;
-- dsi->lanes = 1;
--
-- ts->bridge_i2c =
-- rpi_touchscreen_get_i2c(dev, "raspberrypi,touchscreen-bridge");
-- if (IS_ERR(ts->bridge_i2c)) {
-- ret = -EPROBE_DEFER;
-- return ret;
-- }
-+ ts->i2c = i2c;
-
- ver = rpi_touchscreen_i2c_read(ts, REG_ID);
- if (ver < 0) {
-@@ -443,11 +387,8 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
- }
-
- switch (ver) {
-- case 0xde:
-- ts->atmel_ver = 1;
-- break;
-- case 0xc3:
-- ts->atmel_ver = 2;
-+ case 0xde: /* ver 1 */
-+ case 0xc3: /* ver 2 */
- break;
- default:
- dev_err(dev, "Unknown Atmel firmware revision: 0x%02x\n", ver);
-@@ -457,65 +398,104 @@ static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
- /* Turn off at boot, so we can cleanly sequence powering on. */
- rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
-
-- drm_panel_init(&ts->base);
-+ /* Look up the DSI host. It needs to probe before we do. */
-+ endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
-+ dsi_host_node = of_graph_get_remote_port_parent(endpoint);
-+ host = of_find_mipi_dsi_host_by_node(dsi_host_node);
-+ of_node_put(dsi_host_node);
-+ if (!host) {
-+ of_node_put(endpoint);
-+ return -EPROBE_DEFER;
-+ }
-+
-+ info.node = of_graph_get_remote_port(endpoint);
-+ of_node_put(endpoint);
-+
-+ ts->dsi = mipi_dsi_device_register_full(host, &info);
-+ if (IS_ERR(ts->dsi)) {
-+ dev_err(dev, "DSI device registration failed: %ld\n",
-+ PTR_ERR(ts->dsi));
-+ return PTR_ERR(ts->dsi);
-+ }
-+
- ts->base.dev = dev;
- ts->base.funcs = &rpi_touchscreen_funcs;
-
-+ /* This appears last, as it's what will unblock the DSI host
-+ * driver's component bind function.
-+ */
- ret = drm_panel_add(&ts->base);
-- if (ret < 0)
-- goto err_release_bridge;
--
-- return mipi_dsi_attach(dsi);
-+ if (ret)
-+ return ret;
-
--err_release_bridge:
-- put_device(&ts->bridge_i2c->dev);
-- return ret;
-+ return 0;
- }
-
--static int rpi_touchscreen_dsi_remove(struct mipi_dsi_device *dsi)
-+static int rpi_touchscreen_remove(struct i2c_client *i2c)
- {
-- struct device *dev = &dsi->dev;
-- struct rpi_touchscreen *ts = dev_get_drvdata(dev);
-- int ret;
-+ struct rpi_touchscreen *ts = i2c_get_clientdata(i2c);
-
-- ret = mipi_dsi_detach(dsi);
-- if (ret < 0) {
-- dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
-- return ret;
-- }
-+ mipi_dsi_detach(ts->dsi);
-
-- drm_panel_detach(&ts->base);
- drm_panel_remove(&ts->base);
-
-- put_device(&ts->bridge_i2c->dev);
-+ mipi_dsi_device_unregister(ts->dsi);
-+ kfree(ts->dsi);
-
- return 0;
- }
-
--static void rpi_touchscreen_dsi_shutdown(struct mipi_dsi_device *dsi)
-+static int rpi_touchscreen_dsi_probe(struct mipi_dsi_device *dsi)
- {
-- struct device *dev = &dsi->dev;
-- struct rpi_touchscreen *ts = dev_get_drvdata(dev);
-+ int ret;
-
-- rpi_touchscreen_i2c_write(ts, REG_POWERON, 0);
-+ dsi->mode_flags = (MIPI_DSI_MODE_VIDEO |
-+ MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
-+ MIPI_DSI_MODE_LPM);
-+ dsi->format = MIPI_DSI_FMT_RGB888;
-+ dsi->lanes = 1;
-+
-+ ret = mipi_dsi_attach(dsi);
-+
-+ if (ret)
-+ dev_err(&dsi->dev, "failed to attach dsi to host: %d\n", ret);
-+
-+ return ret;
- }
-
--static const struct of_device_id rpi_touchscreen_of_match[] = {
-- { .compatible = "raspberrypi,touchscreen" },
-+static struct mipi_dsi_driver rpi_touchscreen_dsi_driver = {
-+ .driver.name = RPI_DSI_DRIVER_NAME,
-+ .probe = rpi_touchscreen_dsi_probe,
-+};
-+
-+static const struct of_device_id rpi_touchscreen_of_ids[] = {
-+ { .compatible = "raspberrypi,7inch-touchscreen-panel" },
- { } /* sentinel */
- };
--MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_match);
-+MODULE_DEVICE_TABLE(of, rpi_touchscreen_of_ids);
-
--static struct mipi_dsi_driver rpi_touchscreen_driver = {
-+static struct i2c_driver rpi_touchscreen_driver = {
- .driver = {
-- .name = "raspberrypi-touchscreen",
-- .of_match_table = rpi_touchscreen_of_match,
-+ .name = "rpi_touchscreen",
-+ .of_match_table = rpi_touchscreen_of_ids,
- },
-- .probe = rpi_touchscreen_dsi_probe,
-- .remove = rpi_touchscreen_dsi_remove,
-- .shutdown = rpi_touchscreen_dsi_shutdown,
-+ .probe = rpi_touchscreen_probe,
-+ .remove = rpi_touchscreen_remove,
- };
--module_mipi_dsi_driver(rpi_touchscreen_driver);
-+
-+static int __init rpi_touchscreen_init(void)
-+{
-+ mipi_dsi_driver_register(&rpi_touchscreen_dsi_driver);
-+ return i2c_add_driver(&rpi_touchscreen_driver);
-+}
-+module_init(rpi_touchscreen_init);
-+
-+static void __exit rpi_touchscreen_exit(void)
-+{
-+ i2c_del_driver(&rpi_touchscreen_driver);
-+ mipi_dsi_driver_unregister(&rpi_touchscreen_dsi_driver);
-+}
-+module_exit(rpi_touchscreen_exit);
-
- MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
- MODULE_DESCRIPTION("Raspberry Pi 7-inch touchscreen driver");
---
-2.21.0
-
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
index ffbf791e8..4271926e4 100644
--- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
+++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend
@@ -3,15 +3,6 @@ FILESEXTRAPATHS_prepend := "${THISDIR}/${BPN}:"
require recipes-kernel/linux/linux-agl.inc
require recipes-kernel/linux/linux-agl-4.14.inc
-# ENABLE DSI
-# ported from https://github.com/k-quigley/linux
-SRC_URI_append = " \
- file://dsi/0001-Add-devicetree-support-for-RaspberryPi-7-panel-over-.patch \
- file://dsi/0002-drm-vc4-Make-DSI-call-into-the-bridge-after-the-DSI-.patch \
- file://dsi/0003-drm-vc4-Set-up-the-DSI-host-at-pdev-probe-time-not-c.patch \
- file://dsi/0004-drm-panel-Backport-4.15-support-for-the-Raspberry-Pi.patch \
-"
-
# NOTE: Kprobes need to be disabled until linux-raspberrypi gets updated
# to newer than 4.14.104 to avoid lttng-modules failing to build.
SRC_URI_append = "\