diff options
Diffstat (limited to 'meta-agl-bsp/meta-raspberrypi')
8 files changed, 200 insertions, 0 deletions
diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend index 5eecff6f1..9891fa200 100644 --- a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend +++ b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bbappend @@ -1,4 +1,5 @@ DISABLE_OVERSCAN = "1" +TOTAL_BOARD_MEM = "3072" do_deploy_append_raspberrypi4() { # ENABLE CAN @@ -17,6 +18,10 @@ do_deploy_append_raspberrypi4() { ;; esac fi + + if [ "${AGL_XEN_WANTED}" = "1" ]; then + echo "total_mem=${TOTAL_BOARD_MEM}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi } do_deploy_append() { diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/files/boot_xen.cmd b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/files/boot_xen.cmd new file mode 100644 index 000000000..24cfb1658 --- /dev/null +++ b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/files/boot_xen.cmd @@ -0,0 +1,45 @@ +# +# SPDX-License-Identifier: MIT +# +# Copyright (c) 2020, MERA +# +# Author: Leonid Lazarev +# +# Xen Boot Script +# +# https://www.raspberrypi.org/documentation/configuration/device-tree.md +# We do not set fdt_addr, because device tree initially is loaded by raspberry pi firmware loader and the particular +# modification are performed. The prepared DTS is propagated to u-boot and this prepared device tree has to be reused. + +setenv kernel_addr_r 0x00480000 # 16M +setenv xen_addr_r 0x00200000 # 2M + +# Load xen to ${xen_addr_r}. +fatload mmc 0:1 ${xen_addr_r} /xen-@@MACHINE@@ + +#configure dom0 +fdt addr ${fdt_addr} + +#read prepared bootargs, rapsberry pi prepared initial list of the parameters for loading +fdt get value bootargs /chosen bootargs +fdt resize 8192 + +# add device type for raspberry +fdt set pcie0 device_type "pci" + +fdt chosen +fdt set /chosen \#address-cells <1> +fdt set /chosen \#size-cells <1> + +# Load Linux Image to ${kernel_addr_r} +fatload mmc 0:1 ${kernel_addr_r} /@@KERNEL_IMAGETYPE@@ + +# we load dom0 with 1512 MB of memory +fdt mknod /chosen dom0 +fdt set /chosen xen,xen-bootargs "console=dtuart dtuart=/soc/serial@7e215040 sync_console dom0_mem=1512M bootscrub=0" +fdt set /chosen xen,dom0-bootargs "${bootargs}" + +fdt set /chosen/dom0 compatible "xen,linux-zimage", "xen,multiboot-module" +fdt set /chosen/dom0 reg <${kernel_addr_r} 0x${filesize} > + +@@KERNEL_BOOTCMD@@ ${xen_addr_r} - ${fdt_addr} diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bbappend new file mode 100644 index 000000000..2437d9a84 --- /dev/null +++ b/meta-agl-bsp/meta-raspberrypi/recipes-bsp/rpi-u-boot-scr/rpi-u-boot-scr.bbappend @@ -0,0 +1,18 @@ +FILESEXTRAPATHS_prepend := "${THISDIR}/files:" + +SRC_URI_append =" \ + ${@bb.utils.contains('AGL_XEN_WANTED','1',' file://boot_xen.cmd','',d)} \ +" + +do_compile_append() { + + # if xen feature is activated we overwirte the boot script with xen specific one + if [ "${AGL_XEN_WANTED}" = "1" ]; then + sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \ + -e 's/@@KERNEL_BOOTCMD@@/${KERNEL_BOOTCMD}/' \ + -e 's/@@MACHINE@@/${MACHINE}/' \ + "${WORKDIR}/boot_xen.cmd" > "${WORKDIR}/boot.cmd" + + mkimage -A arm -T script -C none -n "Boot script" -d "${WORKDIR}/boot.cmd" boot.scr + fi +}
\ No newline at end of file diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/files/0002-Disable-DMA-in-sdhci-driver.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/files/0002-Disable-DMA-in-sdhci-driver.patch new file mode 100644 index 000000000..04a8733f2 --- /dev/null +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/files/0002-Disable-DMA-in-sdhci-driver.patch @@ -0,0 +1,25 @@ +From 758bc9b917469bc4e527dc3aae821c91cbc3d426 Mon Sep 17 00:00:00 2001 +From: Stewart Hildebrand <stewart.hildebrand@dornerworks.com> +Date: Thu, 18 Jul 2019 00:01:27 -0400 +Subject: [PATCH 2/4] Disable DMA in sdhci driver + +--- + drivers/mmc/host/sdhci-iproc.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c +index 983cddce9..150f7bfc8 100644 +--- a/drivers/mmc/host/sdhci-iproc.c ++++ b/drivers/mmc/host/sdhci-iproc.c +@@ -252,6 +252,8 @@ static const struct sdhci_iproc_data bcm2835_data = { + + static const struct sdhci_pltfm_data sdhci_bcm2838_pltfm_data = { + .ops = &sdhci_iproc_32only_ops, ++ .quirks = SDHCI_QUIRK_BROKEN_DMA | ++ SDHCI_QUIRK_BROKEN_ADMA, + }; + + static const struct sdhci_iproc_data bcm2838_data = { +-- +2.17.1 + diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/files/0003-Fix-PCIe-in-dom0-for-RPi4.patch b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/files/0003-Fix-PCIe-in-dom0-for-RPi4.patch new file mode 100644 index 000000000..835f36da3 --- /dev/null +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/files/0003-Fix-PCIe-in-dom0-for-RPi4.patch @@ -0,0 +1,31 @@ +From 77765c2a47ce43911b8fe7b09f037c9bc13008ca Mon Sep 17 00:00:00 2001 +From: Jeff Kubascik <jeff.kubascik@dornerworks.com> +Date: Tue, 30 Jul 2019 08:49:56 -0400 +Subject: [PATCH 3/4] Fix PCIe in dom0 for RPi4 + +There is an issue where the Broadcom PCIe driver and Xen swiotlb layer +invoke each other's dma alloc function recursively until the stack blows +up. The cause appears to be due to arch_setup_dma_ops being called +more than once for the device, possibly through of_dma_configure, and +screwing up the dma_ops pointers. This patch adds a check to make sure +that the xen_dma_ops are applied only once for a device. +--- + arch/arm64/mm/dma-mapping.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c +index d3a5bb16f..243a3b9be 100644 +--- a/arch/arm64/mm/dma-mapping.c ++++ b/arch/arm64/mm/dma-mapping.c +@@ -895,7 +895,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size, + __iommu_setup_dma_ops(dev, dma_base, size, iommu); + + #ifdef CONFIG_XEN +- if (xen_initial_domain()) { ++ if (!dev->archdata.dev_dma_ops && xen_initial_domain()) { + dev->archdata.dev_dma_ops = dev->dma_ops; + dev->dma_ops = xen_dma_ops; + } +-- +2.17.1 + diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/files/xen-be.cfg b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/files/xen-be.cfg new file mode 100644 index 000000000..36f390187 --- /dev/null +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/files/xen-be.cfg @@ -0,0 +1,50 @@ +# global stuff - these enable us to allow some +# of the not so generic stuff below for xen +CONFIG_PARAVIRT=y +CONFIG_NET=y +CONFIG_NET_CORE=y +CONFIG_NETDEVICES=y +CONFIG_BLOCK=y +CONFIG_WATCHDOG=y +CONFIG_TARGET_CORE=y +CONFIG_SCSI=y +CONFIG_FB=y +CONFIG_INPUT_MISC=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_TTY=y +# Technically not required but otherwise produces +# pretty useless systems starting from allnoconfig +# You want TCP/IP and ELF binaries right? +CONFIG_INET=y +CONFIG_BINFMT_ELF=y +# generic config +CONFIG_XEN=y +CONFIG_XEN_DOM0=y +# backend drivers +CONFIG_XEN_BACKEND=y +CONFIG_XEN_BLKDEV_BACKEND=m +CONFIG_XEN_NETDEV_BACKEND=m +CONFIG_HVC_XEN=y +CONFIG_XEN_WDT=m +CONFIG_XEN_SCSI_BACKEND=m +# frontend drivers +CONFIG_XEN_FBDEV_FRONTEND=m +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m +CONFIG_XEN_SCSI_FRONTEND=m +# others +CONFIG_XEN_BALLOON=y +CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +CONFIG_XEN_GNTDEV=m +CONFIG_XEN_GRANT_DEV_ALLOC=m +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_PRIVCMD=m +CONFIG_DEBUG_INFO=y +CONFIG_FRAME_POINTER=y diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend index ff17b2532..f78e0b5eb 100644 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_%.bbappend @@ -5,8 +5,18 @@ require recipes-kernel/linux/linux-agl.inc SRC_URI_append = "\ ${@oe.utils.conditional('USE_FAYTECH_MONITOR', '1', 'file://0002-faytech-fix-rpi.patch', '', d)} \ " +#take in account that linux under xen should use the hvc0 console +SERIAL_OPTION = "${@bb.utils.contains('AGL_XEN_WANTED','1','hvc0','115200;ttyS0',d)}" +SERIAL = "${@oe.utils.conditional("ENABLE_UART", "1", "console=${SERIAL_OPTION}", "", d)}" CMDLINE_DEBUG = "" + +#XEN related option +CMDLINE_append = ' ${@bb.utils.contains('AGL_XEN_WANTED','1','clk_ignore_unused','',d)}' + +#workaround for crash during brcmfmac loading. Disable it at this moment +CMDLINE_append = ' ${@bb.utils.contains('AGL_XEN_WANTED','1','modprobe.blacklist=brcmfmac','',d)}' + CMDLINE_append = " usbhid.mousepoll=0" # Add options to allow CMA to operate diff --git a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.19.bbappend b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.19.bbappend index 782d61597..7f17f0c3f 100644 --- a/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.19.bbappend +++ b/meta-agl-bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.19.bbappend @@ -2,3 +2,19 @@ require recipes-kernel/linux/linux-agl-4.19.inc ENABLE_UART_raspberrypi4 = "1" +FILESEXTRAPATHS_prepend := "${THISDIR}/files:" + + +# For Xen + +SRC_URI_append =" \ + ${@bb.utils.contains('AGL_XEN_WANTED','1','file://0002-Disable-DMA-in-sdhci-driver.patch','',d)} \ +" + +SRC_URI_append =" \ + ${@bb.utils.contains('AGL_XEN_WANTED','1','file://0003-Fix-PCIe-in-dom0-for-RPi4.patch','',d)} \ +" + +SRC_URI_append = " \ + ${@bb.utils.contains('AGL_XEN_WANTED','1','file://xen-be.cfg','',d)} \ +" |