summaryrefslogtreecommitdiffstats
path: root/meta-security/recipes-devtools/e2fsprogs/e2fsprogs.inc
diff options
context:
space:
mode:
Diffstat (limited to 'meta-security/recipes-devtools/e2fsprogs/e2fsprogs.inc')
0 files changed, 0 insertions, 0 deletions
n102'>102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 
###########################################################################
# Copyright 2015, 2016, 2017 IoT.bzh
#
# author: Fulup Ar Foll <fulup@iot.bzh>
# contrib: Romain Forlot <romain.forlot@iot.bzh>
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
###########################################################################

#--------------------------------------------------------------------------
#  WARNING:
#     Do not change this cmake template
#     Customise your preferences in "./conf.d/cmake/config.cmake"
#--------------------------------------------------------------------------
# CMake 3.6 imported macros to simulate list(FILTER ...) subcommand
# -----------------------
MACRO(PARSE_ARGUMENTS prefix arg_names option_names)
SET(DEFAULT_ARGS)
FOREACH(arg_name ${arg_names})
  SET(${prefix}_${arg_name})
ENDFOREACH(arg_name)
FOREACH(option ${option_names})
  SET(${prefix}_${option} FALSE)
ENDFOREACH(option)

SET(current_arg_name DEFAULT_ARGS)
SET(current_arg_list)
FOREACH(arg ${ARGN})
  LIST_CONTAINS(is_arg_name ${arg} ${arg_names})
  IF (is_arg_name)
	SET(${prefix}_${current_arg_name} ${current_arg_list})
	SET(current_arg_name ${arg})
	SET(current_arg_list)
  ELSE (is_arg_name)
	LIST_CONTAINS(is_option ${arg} ${option_names})
	IF (is_option)
  SET(${prefix}_${arg} TRUE)
	ELSE (is_option)
  SET(current_arg_list ${current_arg_list} ${arg})
	ENDIF (is_option)
  ENDIF (is_arg_name)
ENDFOREACH(arg)
SET(${prefix}_${current_arg_name} ${current_arg_list})
ENDMACRO(PARSE_ARGUMENTS)

MACRO(LIST_CONTAINS var value)
SET(${var})
FOREACH (value2 ${ARGN})
  IF (${value} STREQUAL ${value2})
	SET(${var} TRUE)
  ENDIF (${value} STREQUAL ${value2})
ENDFOREACH (value2)
ENDMACRO(LIST_CONTAINS)

MACRO(LIST_FILTER)
PARSE_ARGUMENTS(LIST_FILTER "OUTPUT_VARIABLE" "" ${ARGV})
# Check arguments.
LIST(LENGTH LIST_FILTER_DEFAULT_ARGS LIST_FILTER_default_length)
IF(${LIST_FILTER_default_length} EQUAL 0)
  MESSAGE(FATAL_ERROR "LIST_FILTER: missing list variable.")
ENDIF(${LIST_FILTER_default_length} EQUAL 0)
IF(${LIST_FILTER_default_length} EQUAL 1)
  MESSAGE(FATAL_ERROR "LIST_FILTER: missing regular expression variable.")
ENDIF(${LIST_FILTER_default_length} EQUAL 1)
# Reset output variable
IF(NOT LIST_FILTER_OUTPUT_VARIABLE)
  SET(LIST_FILTER_OUTPUT_VARIABLE "LIST_FILTER_internal_output")
ENDIF(NOT LIST_FILTER_OUTPUT_VARIABLE)
SET(${LIST_FILTER_OUTPUT_VARIABLE})
# Extract input list from arguments
LIST(GET LIST_FILTER_DEFAULT_ARGS 0 LIST_FILTER_input_list)
LIST(REMOVE_AT LIST_FILTER_DEFAULT_ARGS 0)
FOREACH(LIST_FILTER_item ${${LIST_FILTER_input_list}})
  FOREACH(LIST_FILTER_regexp_var ${LIST_FILTER_DEFAULT_ARGS})
	FOREACH(LIST_FILTER_regexp ${${LIST_FILTER_regexp_var}})
	  IF(${LIST_FILTER_item} MATCHES ${LIST_FILTER_regexp})
		LIST(APPEND ${LIST_FILTER_OUTPUT_VARIABLE} ${LIST_FILTER_item})
	  ENDIF(${LIST_FILTER_item} MATCHES ${LIST_FILTER_regexp})
	ENDFOREACH(LIST_FILTER_regexp ${${LIST_FILTER_regexp_var}})
  ENDFOREACH(LIST_FILTER_regexp_var)
ENDFOREACH(LIST_FILTER_item)
# If OUTPUT_VARIABLE is not specified, overwrite the input list.
IF(${LIST_FILTER_OUTPUT_VARIABLE} STREQUAL "LIST_FILTER_internal_output")
  SET(${LIST_FILTER_input_list} ${${LIST_FILTER_OUTPUT_VARIABLE}})
ENDIF(${LIST_FILTER_OUTPUT_VARIABLE} STREQUAL "LIST_FILTER_internal_output")
ENDMACRO(LIST_FILTER)

# Generic useful macro
# -----------------------
macro(PROJECT_TARGET_ADD TARGET_NAME)
	set_property(GLOBAL APPEND PROPERTY PROJECT_TARGETS ${TARGET_NAME})
	set(TARGET_NAME ${TARGET_NAME})
endmacro(PROJECT_TARGET_ADD)

macro(PROJECT_PKGDEP_ADD PKG_NAME)
	set_property(GLOBAL APPEND PROPERTY PROJECT_PKG_DEPS ${PKG_NAME})
endmacro(PROJECT_PKGDEP_ADD)

macro(defstr name value)
	add_definitions(-D${name}=${value})
endmacro(defstr)

macro(configure_files_in_dir dir)
	file(GLOB filelist "${dir}/*in")
	foreach(file ${filelist})
		get_filename_component(filename ${file} NAME)
		string(REGEX REPLACE "target" "${RSYNC_TARGET}" destinationfile ${filename})
		string(REGEX REPLACE ".in$" "" destinationfile ${destinationfile})
		configure_file(${file} ${CMAKE_CURRENT_BINARY_DIR}/target/${destinationfile})
		set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${CMAKE_CURRENT_BINARY_DIR}/target/${destinationfile}")
	endforeach()
endmacro(configure_files_in_dir)

# Create custom target dedicated for HTML5 and DATA AGL target type
macro(add_input_files INPUT_FILES)
	if(NOT DEFINED XML_FILES)
		set(ext_reg "xml$")
		set(XML_LIST ${INPUT_FILES})
		list_filter(XML_LIST ext_reg)
	endif()
	if(NOT DEFINED LUA_LIST)
		set(ext_reg "lua$")
		set(LUA_LIST ${INPUT_FILES})
		list_filter(LUA_LIST ext_reg)
	endif()
	if(NOT DEFINED JSON_FILES)
		set(ext_reg "json$")
		set(JSON_LIST ${INPUT_FILES})
		list_filter(JSON_LIST ext_reg)
	endif()

	# These are v3.6 subcommand. Not used as default for now as
	# many dev use Ubuntu 16.04 which have only 3.5 version
	#list(FILTER XML_LIST INCLUDE REGEX "xml$")
	#list(FILTER LUA_LIST INCLUDE REGEX "lua$")
	#list(FILTER JSON_LIST INCLUDE REGEX "json$")

	add_custom_target(${TARGET_NAME} ALL
	DEPENDS ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
	)

	foreach(file ${XML_LIST})
		add_custom_command(TARGET ${TARGET_NAME}
			PRE_BUILD
			WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
			COMMAND ${XML_CHECKER} ${file}
		)
	endforeach()
	foreach(file ${LUA_LIST})
	add_custom_command(TARGET ${TARGET_NAME}
		PRE_BUILD
		WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
		COMMAND ${LUA_CHECKER} ${file}
	)
	endforeach()
	foreach(file ${JSON_LIST})
	add_custom_command(TARGET ${TARGET_NAME}
		PRE_BUILD
		WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}
		COMMAND cat ${file} | ${JSON_CHECKER}
	)
	endforeach()

	add_custom_command(OUTPUT ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
	DEPENDS ${INPUT_FILES}
	COMMAND mkdir -p ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
	COMMAND touch ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
	COMMAND cp -r ${INPUT_FILES} ${CMAKE_CURRENT_BINARY_DIR}/${TARGET_NAME}
	)
endmacro()

# Set the name of the OPENAPI definition JSON file for binding v2
macro(set_openapi_filename openapi_filename)
	set(OPENAPI_DEF ${openapi_filename} CACHE STRING "OpenAPI JSON file name used to generate binding header file before building a binding v2 target.")
endmacro()

# Pre-packaging
macro(project_targets_populate)
	# Default Widget default directory
	set(BINDIR bin)
	set(ETCDIR etc)
	set(LIBDIR lib)
	set(HTTPDIR htdocs)
	set(DATADIR data)
	set(PACKAGE_BINDIR  ${PROJECT_PKG_BUILD_DIR}/${BINDIR})
	set(PACKAGE_ETCDIR  ${PROJECT_PKG_BUILD_DIR}/${ETCDIR})
	set(PACKAGE_LIBDIR  ${PROJECT_PKG_BUILD_DIR}/${LIBDIR})
	set(PACKAGE_HTTPDIR ${PROJECT_PKG_BUILD_DIR}/${HTTPDIR})
	set(PACKAGE_DATADIR ${PROJECT_PKG_BUILD_DIR}/${DATADIR})

	add_custom_command(OUTPUT ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR}
		COMMAND mkdir -p ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR})
	add_custom_target(populate DEPENDS ${PACKAGE_BINDIR} ${PACKAGE_ETCDIR} ${PACKAGE_LIBDIR} ${PACKAGE_HTTPDIR} ${PACKAGE_DATADIR})

	INSTALL(CODE "execute_process(COMMAND make populate)")
	INSTALL(DIRECTORY ${PROJECT_PKG_BUILD_DIR}/
		DESTINATION ${CMAKE_INSTALL_PREFIX}/${PROJECT_NAME}
	)

	get_property(PROJECT_TARGETS GLOBAL PROPERTY PROJECT_TARGETS)
	foreach(TARGET ${PROJECT_TARGETS})
	get_target_property(T ${TARGET} LABELS)
	if(T)
		# Declaration of a custom command that will populate widget tree with the target
		set(POPULE_PACKAGE_TARGET "project_populate_${TARGET}")

		get_target_property(P ${TARGET} PREFIX)
		get_target_property(BD ${TARGET} BINARY_DIR)
		get_target_property(SD ${TARGET} SOURCE_DIR)
		get_target_property(OUT ${TARGET} OUTPUT_NAME)

		if(P MATCHES "NOTFOUND$")
			if (${T} STREQUAL "BINDING")
				set(P "lib")
			else()
				set(P "")
			endif()
		endif()

		if(${T} STREQUAL "BINDING")
			list(APPEND BINDINGS_LIST "${P}${OUT}")
			add_custom_command(OUTPUT ${PACKAGE_LIBDIR}/${P}${OUT}.so
				DEPENDS ${BD}/${P}${OUT}.so
				COMMAND mkdir -p ${PACKAGE_LIBDIR}
				COMMAND cp ${BD}/${P}${OUT}.so ${PACKAGE_LIBDIR}
			)
			add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_LIBDIR}/${P}${OUT}.so)
			add_dependencies(populate ${POPULE_PACKAGE_TARGET})
			add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
		elseif(${T} STREQUAL "BINDINGV2")
			if (OPENAPI_DEF)
				add_custom_command(OUTPUT ${SD}/${OPENAPI_DEF}.h
					DEPENDS ${SD}/${OPENAPI_DEF}.json
					COMMAND afb-genskel ${SD}/${OPENAPI_DEF}.json > ${SD}/${OPENAPI_DEF}.h
				)
				add_custom_target("${TARGET}_GENSKEL" DEPENDS ${SD}/${OPENAPI_DEF}.h
					COMMENT "Generating OpenAPI header file ${OPENAPI_DEF}.h")
				add_dependencies(${TARGET} "${TARGET}_GENSKEL")
			else()
				add_custom_command(OUTPUT ${SD}/${OUT}-apidef.h
					DEPENDS ${SD}/${OUT}-apidef.json
					COMMAND afb-genskel ${SD}/${OUT}-apidef.json > ${SD}/${OUT}-apidef.h
				)
				add_custom_target("${TARGET}_GENSKEL" DEPENDS ${SD}/${OUT}-apidef.h
					COMMENT "Generating OpenAPI header file ${OUT}-apidef.h")
				add_dependencies(${TARGET} "${TARGET}_GENSKEL")
			endif()

			add_custom_command(OUTPUT ${PACKAGE_LIBDIR}/${P}${OUT}.so
					DEPENDS ${BD}/${P}${OUT}.so
					COMMAND mkdir -p ${PACKAGE_LIBDIR}
					COMMAND cp ${BD}/${P}${OUT}.so ${PACKAGE_LIBDIR}
				)
				add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_LIBDIR}/${P}${OUT}.so)
				add_dependencies(populate ${POPULE_PACKAGE_TARGET})
				add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
		elseif(${T} STREQUAL "EXECUTABLE")
			add_custom_command(OUTPUT ${PACKAGE_BINDIR}/${P}${OUT}
				DEPENDS ${BD}/${P}${OUT}
				COMMAND mkdir -p ${PACKAGE_BINDIR}
				COMMAND cp ${BD}/${P}${OUT} ${PACKAGE_BINDIR}
			)
			add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_BINDIR}/${P}${OUT})
			add_dependencies(populate ${POPULE_PACKAGE_TARGET})
			add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
		elseif(${T} STREQUAL "HTDOCS")
			add_custom_command(OUTPUT ${PACKAGE_HTTPDIR}-xx
				DEPENDS ${BD}/${P}${OUT}
				COMMAND mkdir -p ${PACKAGE_HTTPDIR}
				COMMAND touch ${PACKAGE_HTTPDIR}
				COMMAND cp -r ${BD}/${P}${OUT}/* ${PACKAGE_HTTPDIR}
			)
			add_custom_target(${POPULE_PACKAGE_TARGET} DEPENDS ${PACKAGE_HTTPDIR}-xx)
			add_dependencies(populate ${POPULE_PACKAGE_TARGET})
			add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
		elseif(${T} STREQUAL "DATA")
			# Generate list of output files instead of just one output directory
			get_target_property(SF ${TARGET} SOURCES)
			foreach(file ${SF})
				get_filename_component(JUST_FILENAME ${file} NAME)
				list(APPEND OUTPUT_FILES ${PACKAGE_DATADIR}/${JUST_FILENAME})
			endforeach()
			add_custom_target(${POPULE_PACKAGE_TARGET})
			add_custom_command(TARGET ${POPULE_PACKAGE_TARGET}
				POST_BUILD
				COMMAND mkdir -p ${PACKAGE_DATADIR}
				COMMAND touch ${PACKAGE_DATADIR}
				COMMAND cp -r ${BD}/${TARGET} ${PACKAGE_DATADIR}
			)
			add_dependencies(populate ${POPULE_PACKAGE_TARGET})
			add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
			elseif(${T} STREQUAL "BINDING-CONFIG")
			# Generate list of output files instead of just one output directory
			get_target_property(SF ${TARGET} SOURCES)
			foreach(file ${SF})
				get_filename_component(JUST_FILENAME ${file} NAME)
				list(APPEND OUTPUT_FILES ${PACKAGE_ETCDIR}/${JUST_FILENAME})
			endforeach()
			add_custom_target(${POPULE_PACKAGE_TARGET})
			add_custom_command(TARGET ${POPULE_PACKAGE_TARGET}
				POST_BUILD
				COMMAND mkdir -p ${PACKAGE_ETCDIR}
				COMMAND touch ${PACKAGE_ETCDIR}
				COMMAND cp -r ${BD}/${TARGET} ${PACKAGE_ETCDIR}
			)
			add_dependencies(populate ${POPULE_PACKAGE_TARGET})
			add_dependencies(${POPULE_PACKAGE_TARGET} ${TARGET})
		endif(${T} STREQUAL "BINDING")
		elseif(${CMAKE_BUILD_TYPE} MATCHES "[Dd][Ee][Bb][Uu][Gg]")
			MESSAGE("${Yellow}.. Warning: ${TARGET} ignored when packaging.${ColourReset}")
		endif()
	endforeach()
endmacro(project_targets_populate)

macro(remote_targets_populate)
	if (DEFINED ENV{RSYNC_TARGET})
		set (RSYNC_TARGET $ENV{RSYNC_TARGET})
	endif()
	if (DEFINED ENV{RSYNC_PREFIX})
		set (RSYNC_PREFIX $ENV{RSYNC_PREFIX})
	endif()

	set(
		REMOTE_LAUNCH "Test on target with: ${CMAKE_CURRENT_BINARY_DIR}/target/start-on-${RSYNC_TARGET}.sh"
		CACHE STRING "Command to start ${PROJECT_NAME} on remote target ${RSYNC_TARGET}"
	)

	if(NOT RSYNC_TARGET OR NOT RSYNC_PREFIX)
		message ("${Yellow}.. Warning: RSYNC_TARGET RSYNC_PREFIX not defined 'make remote-target-populate' not instanciated${ColourReset}")
		add_custom_target(remote-target-populate
			COMMENT "${Red}*** Fatal: RSYNC_TARGET RSYNC_PREFIX environment variables required with 'make remote-target-populate'${ColourReset}"
			COMMAND exit -1
		)
	else()
		set(BINDINGS_REGEX "not_set")
		if(DEFINED BINDINGS_LIST)
			list(LENGTH BINDINGS_LIST BINDINGS_LIST_LENGTH)
			if(BINDINGS_LIST_LENGTH EQUAL 1)
				list(GET BINDINGS_LIST 0 BINDINGS_REGEX)
				string(APPEND BINDINGS_REGEX ".so")
			elseif(BINDINGS_LIST_LENGTH GREATER 1)
				foreach(B IN LISTS BINDINGS_LIST)
					STRING(APPEND BINDINGS_STR "${B}|")
				endforeach()
					STRING(REGEX REPLACE "^(.*)\\|$" "(\\1).so" BINDINGS_REGEX ${BINDINGS_STR})
			endif()
		endif()

		configure_files_in_dir(${TEMPLATE_DIR})
		configure_files_in_dir(${TEMPLATE_DIR})

		add_custom_target(remote-target-populate
			COMMAND chmod +x ${CMAKE_CURRENT_BINARY_DIR}/target/*.sh
			COMMAND rsync -e "ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null" --archive --delete ${PROJECT_PKG_BUILD_DIR}/ ${RSYNC_TARGET}:${RSYNC_PREFIX}/${PROJECT_NAME}
		)

		add_custom_command(TARGET remote-target-populate
		POST_BUILD
		COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --green --bold ${REMOTE_LAUNCH}
		)

		add_dependencies(remote-target-populate populate)
	endif()
endmacro(remote_targets_populate)

macro(wgt_package_build)
	if(NOT EXISTS ${WIDGET_CONFIG_TEMPLATE})
		MESSAGE(FATAL_ERROR "${Red}WARNING ! Missing mandatory files to build widget file.\nYou need a config.xml template: please specify WIDGET_CONFIG_TEMPLATE correctly.${ColourReset}")
	endif()
	if(NOT WIDGET_TYPE)
		MESSAGE(FATAL_ERROR "WIDGET_TYPE must be set in your config.cmake.\neg.: set(WIDGET_TYPE application/vnd.agl.service)")
	endif()
	if(NOT DEFINED PROJECT_ICON)
		if( ${WIDGET_TYPE} MATCHES "agl.native")
			set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-native.png)
		elseif( ${WIDGET_TYPE} MATCHES "agl.service")
			set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-service.png)
		elseif( ${WIDGET_TYPE} MATCHES "x-executable")
			set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-qml.png)
		elseif( ${WIDGET_TYPE} MATCHES "text/html")
			set(ICON_PATH ${PKG_APP_TEMPLATE_DIR}/wgt/icon-html5.png)
		endif()
	elseif(EXISTS "${CMAKE_SOURCE_DIR}/${WIDGET_ICON}")
		set(ICON_PATH "${CMAKE_SOURCE_DIR}/${WIDGET_ICON}")
	elseif(EXISTS "${WIDGET_ICON}")
		set(ICON_PATH "${WIDGET_ICON}")
	else()
		set(ICON_PATH ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/wgt/icon-default.png)
	endif()

	if(NOT WIDGET_ENTRY_POINT)
		set(WIDGET_ENTRY_POINT lib)
	endif()

	add_custom_command(OUTPUT ${PROJECT_PKG_BUILD_DIR}/config.xml
		COMMAND ${CMAKE_COMMAND} -DINFILE=${WIDGET_CONFIG_TEMPLATE} -DOUTFILE=${PROJECT_PKG_BUILD_DIR}/config.xml -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
		COMMAND cp ${ICON_PATH} ${PROJECT_PKG_BUILD_DIR}/${PROJECT_ICON}

	)
	add_custom_target(packaging_wgt DEPENDS ${PROJECT_PKG_BUILD_DIR}/config.xml)

	# Fulup ??? copy any extra file in wgt/etc into populate package before building the widget
	file(GLOB PROJECT_CONF_FILES "${TEMPLATE_DIR}/etc/*")
	if(${PROJECT_CONF_FILES})
		file(COPY "${TEMPLATE_DIR}/etc/*" DESTINATION ${PROJECT_PKG_BUILD_DIR}/etc/)
	endif(${PROJECT_CONF_FILES})

	add_custom_command(OUTPUT ${PROJECT_NAME}.wgt
		DEPENDS ${PROJECT_TARGETS}
		COMMAND wgtpkg-pack -f -o ${PROJECT_NAME}.wgt ${PROJECT_PKG_BUILD_DIR}
	)

	add_custom_target(widget DEPENDS ${PROJECT_NAME}.wgt)
	add_dependencies(widget populate packaging_wgt)
	set_property(DIRECTORY APPEND PROPERTY ADDITIONAL_MAKE_CLEAN_FILES "${CMAKE_CURRENT_BINARY_DIR}/${PROJECT_NAME}.wgt")

	if(NOT RSYNC_TARGET)
		message ("${Yellow}.. Warning: RSYNC_TARGET not defined 'make widget-target-install' not instanciated${ColourReset}")
		add_custom_target(widget-target-install
			COMMENT "${Red}*** Fatal: RSYNC_TARGET RSYNC_PREFIX environment variables required with 'make widget-target-install'${ColourReset}"
			COMMAND exit -1
		)
	else()
	configure_files_in_dir(${TEMPLATE_DIR})
	add_custom_target(widget-target-install
	DEPENDS widget
	COMMAND chmod +x ${CMAKE_CURRENT_BINARY_DIR}/target/install-wgt-on-${RSYNC_TARGET}.sh
	COMMAND ${CMAKE_CURRENT_BINARY_DIR}/target/install-wgt-on-${RSYNC_TARGET}.sh
	)
endif()

	if(PACKAGE_MESSAGE)
	add_custom_command(TARGET widget
		POST_BUILD
		COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${PACKAGE_MESSAGE}")
	endif()
endmacro(wgt_package_build)

macro(rpm_package_build)
	add_custom_command(OUTPUT ${NPKG_PROJECT_NAME}.spec
		DEPENDS ${PROJECT_TARGETS}
				archive
				packaging
		COMMAND rpmbuild --define=\"%_sourcedir ${PROJECT_PKG_ENTRY_POINT}\" -ba  ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.spec
	)

	add_custom_target(rpm DEPENDS ${NPKG_PROJECT_NAME}.spec)
	add_dependencies(rpm populate packaging)

	if(PACKAGE_MESSAGE)
	add_custom_command(TARGET rpm
		POST_BUILD
		COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${PACKAGE_MESSAGE}")
	endif()
endmacro(rpm_package_build)

macro(deb_package_build)
#TODO
endmacro(deb_package_build)

macro(project_package_build)
	if(EXISTS ${TEMPLATE_DIR})
		rpm_package_build()
	endif()

	if(EXISTS ${TEMPLATE_DIR})
		wgt_package_build()
	endif()

	if(EXISTS ${TEMPLATE_DIR})
		deb_package_build()
	endif()
endmacro(project_package_build)

macro(project_subdirs_add)
	set (ARGSLIST ${ARGN})
	list(LENGTH ARGSLIST ARGSNUM)
	if(${ARGSNUM} GREATER 0)
		file(GLOB filelist "${ARGV0}")
	else()
	file(GLOB filelist "*")
	endif()

	foreach(filename ${filelist})
		if(EXISTS "${filename}/CMakeLists.txt")
			add_subdirectory(${filename})
		endif(EXISTS "${filename}/CMakeLists.txt")
	endforeach()
endmacro(project_subdirs_add)

# Print developer helper message when build is done
# -------------------------------------------------------
macro(project_closing_msg)
	get_property(PROJECT_TARGETS_SET GLOBAL PROPERTY PROJECT_TARGETS SET)
	get_property(PROJECT_TARGETS GLOBAL PROPERTY PROJECT_TARGETS)
	if(CLOSING_MESSAGE AND ${PROJECT_TARGETS_SET})
		add_custom_target(${PROJECT_NAME}_build_done ALL
			COMMAND ${CMAKE_COMMAND} -E cmake_echo_color --cyan "++ ${CLOSING_MESSAGE}"
		)
		add_dependencies(${PROJECT_NAME}_build_done
			${PROJECT_TARGETS} populate)
	endif()
endmacro()