aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-12-30meta-oic: Hotfix to support aarch64 for DragonBoard-410cPhilippe Coval2-0/+50
Apply patch from iotivity-1.2.1: * [PATCH 081/341] yocto: Add aarch64 for DragonBoard-410c Bug-AGL: SPEC-158 Change-Id: I06f56ae860760002a6376866488e1f55624f50cc Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
2016-12-29rpi-config: add configurable CMA low and high water marksMatt Ranostay1-0/+8
For dynamically allocating of CMA blocks the low and high water marks settings determine when the GPU requests or releases memory from the CPU. Change-Id: Iad494c101fec0884bb687c5ea51c9657b7c17bd9 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2016-12-29linux-raspberrypi: add ENABLE_CMA options to kernel command lineMatt Ranostay1-0/+3
Add ENABLE_CMA setting that enables required kernel configuration to allow the dynamic CMA to function. Change-Id: I0b0ab0fd7fd64454ea3cc9a89344a98897838e11 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2016-12-2950_local.conf.inc: Enable CMA within the raspberrypi3 templateMatt Ranostay1-1/+5
Allow the raspberrypi3 GPU to use the CMA dynamic memory split to boost performance. Change-Id: Ia72e7b83f7cca2b6b8a622c632345c748547429b Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2016-12-28meta-raspberrypi: disable debug loggingScott Murray1-1/+1
Set CMDLINE_DEBUG in linux-raspberrypi_4.4.bbappend to disable the debug logging by the kernel and systemd that was spamming the console. As a side benefit, this noticeably speeds up booting. Change-Id: Ic99b1626ea20a27d3d157bcb952ec30cd50baeb2 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2016-12-28meta-ti: weston: remove unneeded ivi shell patches and use standard ↵Matt Porter13-1859/+1
ivi-controller The meta-arago layer included a number of ivi shell patches that are not needed in AGL. One multi screen patch conflicts with another bbappend causing build issues as it's already included by a less specific layer. Further, the added "simple TI layout controller", autolaunch, and screenshooter features are all unneeded in AGL. These are removed to reduce the amount of non-essential patches we carry within AGL. As a result of this, all weston.ini directives which use the "simple TI layout controller" directives are removed and weston.ini is switched to use the standard ivi-controller so that WindowManager may run and access the ILM API. The end result is that WindowManager and HomeScreen may now be launched after boot successfully. Change-Id: I8d777fbd4c02acbf9d3ccaeb215b651a8562d5bb Signed-off-by: Matt Porter <mporter@konsulko.com>
2016-12-27Update GENIVI Audio Manager to 7.4 for CES2017 demo.Toshiaki Isogai2-0/+73
Change-Id: I8661db791c60feac41814173b666710409480c7c Signed-off-by: Toshiaki Isogai <tisogai@jp.adit-jv.com>
2016-12-24meta-intel: Fix for the sdk build failure for Intel platformsKien Dinh1-3/+2
Removed linux-firmware-ibt since it is only necessary for the Joule platform. Change-Id: Ia4916fbc777299df4a094874ad1585a43a46d39b Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
2016-12-23Disable psplash when building for RPi because of occasional crashesAnton Gerasimov1-0/+2
Bug-AGL: SPEC-366 Change-Id: Id15035817fcf110d52354fe4822af93d49b8c9ec Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-12-22dra7xx-evm: weston: Align orientation with psplashKarthik Ramanan1-1/+1
The psplash is oriented 180 degrees rotated compared with the HomeScreen application, this change will ensure that they are in sync Change-Id: Ic2a588ff3a061ff500d4050a6915fe5c899a1e7e Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-12-22meta-oic: Hotfix to pull gdbus-codegen from glib-2.0-nativePhilippe Coval1-0/+1
It was discovered while building iotivity-1.2.0 using Intel BSP Bug-AGL: SPEC-158 Change-Id: I4c735a276d3a484a330ef1ea8611105e6a84e35a Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
2016-12-22dra7xx-evm: u-boot: Change default supported display to OSDKarthik Ramanan1-1/+1
The latest dra7xx-evm purchased from ti.com comes with the OSD display, this change will allow the AGL nightly images to work on the latest dra7xx-evm by default. If the user has an older EVM, then the uEnv.txt should be modified to match the connected displays. The complete list of supported LCDs can be found by checking the /boot folder of the the rootfs. Change-Id: I7f7ac06a49670eb8b7446a6b27854bee4b76ace6 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-12-22dra7xx-evm: make HomeScreen application fullscreenKarthik Ramanan1-0/+24
Tested and verified on the Rev H EVM with OSD display Should work on all other supported displays too. Change-Id: Ib8f210ebf84a0f36fbc87c4553d13ff984874051 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-12-22Revert "Disable SoC sound driver in porter board"Harunobu Kurokawa2-17/+0
The audio bug is fixed (SPEC-365), so that it should be revert this commit to enable sound driver. This reverts commit 1a70e5e8f48f17f604ab243dfb3ff01f7aa435f6. Change-Id: I362a900e86cdf7888e5726a6a0a56daeb0d33145 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2016-12-21Change kernel config to enable wifi of ralinkKazumasa Mitsunari4-2/+6
This enables wifi dongle of ralink, for example BUFFALO wifi dongle. Change-Id: Iab408fd5f54feecfadb4f25adab978b0df89d66d Signed-off-by: Kazumasa Mitsunari <kazumasa_mitsunari_za@mail.toyota.co.jp>
2016-12-21dra7xx-evm: weston.ini: remove stale test binaries/screens and add required ↵Matt Porter1-50/+2
modules Remove some launched applications that either don't exist or were used for basic BSP testing. Add drm-backend and ivi-input-controller modules. Fixes weston config so the HomeScreen can now be launched. Change-Id: I2c6e507ccd244c26e8b5f5cf0ad0f68ae9a18495 Signed-off-by: Matt Porter <mporter@konsulko.com>
2016-12-20Enabling build for Intel's Joule boardktdinh6-1/+53
This adds neccessary firmware to support the Joule board, including wifi and bluetooth. Change-Id: Ia6973415113119aaf60fff0dbb494027fba96fd5 Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
2016-12-17Disable SoC sound driver in porter boardNaoto Yamaguchi2-0/+17
The Porter board currently has a problem that pulseaudio can not be used due to the sound driver. I enabled USB Audio as a workaround, but we had to manually change the default sound device. As a further workaround, disable the SoC sound driver on the Porter board. Change-Id: Ie53b75ea0bc252b82910e518da62d2748147fc90 Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
2016-12-16bbappend to add Intel extra driversDominig ar Foll (Intel Open Source)1-0/+13
Change-Id: I11b245aea28b76f17cba3cdc8c964129bbaf906b Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-12-16Enable USB Audio in porter boardNaoto Yamaguchi3-3/+26
This patch is to avoid the problem that pulseaudio can not be used in the Porter board. This patch does the following two correspondences. 1. Enable USB Audio config 2. Corresponding to problem of self-destruction by outputting a lot of printk Change-Id: I58682c0755e04e87ec198dd0494d6f9380ebe4ce Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
2016-12-15Disabling LVDS-1 outputTadao Tanikawa1-0/+5
If HDMI and LVDS were both enabled, parameters about screens become inconsistent on weston. As a workaround until root cause is fixed, disabling LVDS from weston.ini. Change-Id: I150c0ba5e9655974f7dc365c2168fe7e2d7d93ab Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2016-12-15weston-raspberrypi.ini: Add commented out mode for GeChic 1502iScott Murray1-0/+2
Add the commented out mode line for using the GeChic 1502i in 1080p so that it's easy to enable it for the CES demo setup. Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Idcdf25188d3391403ee29c5bda7568c652b4c730
2016-12-15Add patch : ivi input support touch and pointer on subsurfaceNaoto Yamaguchi2-0/+198
This patch is required to use SubSurface in the AGL Distro application. This patch is necessary for at least navigation application. Change-Id: I6faaafed3db52f048bc329050de290cba67a546b Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
2016-12-14new default weston.ini for IntelDominig ar Foll (Intel Open Source)2-0/+39
Change-Id: Id899777abafd84bc2c7eb9d3ba0a22906a45c7cb Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-12-13Rotating the splash screen 90 degreesTasuku Suzuki1-1/+1
AGL demo UI uses screen virtically. This splash screen could be the same orientation. Change-Id: I62333f009dca94da79c8257ee7da3069dd86bc2e Signed-off-by: Tasuku Suzuki <tasuku.suzuki@qt.io>
2016-12-13bluez: Upgrade for using BLE featuresStephane Desneux7-0/+389
This version of bluez, a little forward of 5.43,s includes working features for using BLE GATT services and attributes. This is needed for a demo that uses DIGIPASS SecureClick of Vasco. To be removed when yocto upgrades to bluez 5.44 or higher. Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2016-12-12correcting bbappend localisation for Intel USB wifi supportDominig ar Foll (Intel Open Source)1-13/+0
Change-Id: Ic60a3d8271a14729032f0757df8aa2f8108b7798 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-12-09Adding more drivers as modules for USB devices on IntelDominig ar Foll4-0/+187
Change-Id: Ie854777d28f455082bafdee07f36ab21c025dc68 Signed-off-by: Dominig ar Foll <dominig.arfoll@fridu.net>
2016-12-07Enabling HW acceleration for Intel with libva and correct libva incorrect ↵Dominig ar Foll (Intel Open Source)2-0/+11
runtime dependency with x11 Change-Id: I175b0d9900d61546cb0f116a1d698ee1f60b84b7 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net> Correct libva incorrect runtime dependency with x11 Change-Id: Ic4231c217c8c63575a98d370c898b8cb04e3a980 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-12-06add namespace to config kernelRonan2-0/+8
* missing namespace into defconf Change-Id: I9f292f8186fb771f8eb8c82ad8e7e985c474e9ea Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2016-12-06fix agl-image-weston buildRonan1-1/+1
* weston-init provides weston.service as weston. We only want one recipe which provides weston.service Change-Id: I2b9db570d466cd8f4007e2c28e0231f77d0a36ca Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2016-12-05Merge meta-agl-security into meta-aglStephane Desneux3-28/+0
meta-agl-security only contains one recipe for xmlsec so it's not necessary to maintain a full layer for this Change-Id: I66b3eeaa0e777fcc0c94bdf562b7188b01641d86 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2016-12-05add h3ulcb supportRonan3-0/+61
Change-Id: I9c00765c3c1eece18a80c7b9f16a79a2bb9d2e5a Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2016-12-02Fix: CVE-2016-1238 recent perl doesn't include cwdRomain Forlot1-0/+7
Upstream YP introduced http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/?h=krogoth&id=529bbe2cc2cebeec0ee6cef27aba2d1aafe79d38 Thus this adds a follow-up fix for openssl. Change-Id: Ifb55c3022596a6105662618f4cd08bd0165f5a6b Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2016-12-02optee-os depend on python-pycryptoRonan3-0/+48
* optee-os use python script to build so, We need to add: inherit pythonnative If not we use host python during the build. * During the build, optee-os use script: - scripts/pem_to_pub_c.py - scripts/sign.py Those script depend on python-pycrypto "from Crypto.PublicKey import RSA" So we need to add python-pycrypto native to recipes * The python-pycrypto recipes come from meta-security (out of AGL): https://layers.openembedded.org/layerindex/recipe/39101/ Change-Id: I64340544c9a23a8e9ef62aca348fc08722d3dcc2 Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2016-12-02Revert "Enabling HW acceleration with libvaapi on Intel by default"Jan-Simon Moeller1-7/+1
Due to: Can't install libva-dev-1.7.0-r0@corei7_64: Can't install libva-egl1-1.7.0-r0@corei7_64: no package provides libva-x11 See https://jenkins-new.automotivelinux.org/job/sandbox-snapshot-master/MACHINE=intel-corei7-64,label=agl-test-slave/146/console We need to fix libva through a bbappend. This reverts commit c678e2d040c6071f3b6bec593d3c6271504a92e7. Change-Id: I486aa82484f8b62c65b7ae1a7607f75ade26ce91 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-12-02Set rootfs size based on real size of rootfs imageAnton Gerasimov1-2/+18
ROOTFS_SIZE is recomputed for each image type based on total size of rootfs directory. If rootfs directory gets smaller between creation of rootfs image and SD image, it fill result in corrupted SD image. It should not happen in theory, but it happens occasionally for a reason I could not identify. Change-Id: I1c888c179fdcec32c3cacbbce7b2d34ec70bbb17 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-12-01Add wl-shell-emulator.so to weston.ini to porter and QEMU as well.Anton Gerasimov2-2/+4
CES2017 demo depends on it. Change-Id: I9a01d106175fcfaba74195c9c6efe6e8f2bda4a5 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-11-28weston-raspberrypi.ini: Fix Weston configurationsLeon Anavi1-1/+6
Fix Weston configurations for Raspberry Pi 2/3 and run it in IVI shell. Following these changes start_ALS2016_ivi-shell.sh works again. Bug-AGL: SPEC-268 Change-Id: Ief75dfc078a42aba65161783b2a7beef23115e33 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-11-28Enabling HW acceleration with libvaapi on Intel by defaultDominig ar Foll (Intel Open Source)1-1/+7
Change-Id: I4efd1d2b8d4b6a6c82c68b572bcd5c9fa7a15ad1 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-11-28packagegroup-ivi-common-core-multimedia: add pulseaudio bluetooth modulesStephane Desneux1-0/+8
When bluetooth is set in DISTRO_FEATURES, we need some bluetooth specific modules for pulseaudio. The list of packages is a part of OE's package group 'packagegroup-tools-bluetooth' which also contains extra bluetooth tools we don't want to install in the core AGL image. Bug-AGL: SPEC-293 Change-Id: I47abe11c136ce6a8fd9d58759bbf9ea1a506fd82 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2016-11-25Use IVI-shell instead of desktop-shell as default in weston.iniBocklage, Jens3-15/+10
Using IVI-shell as default for following platforms: - QEMU - Renesas - Raspberry Pi The IVI-shell is needed to run the CES 2017 demo. Signed-off-by: Bocklage, Jens <Jens_Bocklage@mentor.com>
2016-11-24Convert feature.inc to feature.depJan-Simon Möller3-21/+0
This converts the included features used for CI purposes to use the dependency format introduced. Change-Id: I405af9ffbd6954d0e78b5f738e762a80687337d7 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-24Fix file extension from *.bb to *.bbappendKotaro Hashimoto1-0/+0
linux-linaro-qcomlt%.bb was wrong file extension. I modify this file extension from *.bb to *.bbappend. Change-Id: Ib44d0496025d88faf7a34310cc3d208db668ca5a Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
2016-11-24conf-notes.txt: Add image agl-demo-platform-html5Leon Anavi1-0/+1
Add agl-demo-platform-html5 to the list of AGL images. Bug-AGL: SPEC-331 Change-Id: I70f79bfa0b95e8e95f2a4023f91b185814123104 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-11-23meta-rcar-gen3: autoload mmp modulesYannick Gicquel5-0/+6
Add KERNEL_MODULES_AUTOLOAD directive some to multimedia package drivers. Thus after bootup, multimedia framework is ready to use hw acceleration IP. Change-Id: I43a92fdf2dff1f546e5a532b13203efd4a6b829c Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-22dra7xx-evm: weston: add changes for AGL home screenKarthik Ramanan23-0/+5859
This patch set contains three sets of changes: * Recipes and patches from meta-arago for weston bringup * Additional patches to support ivi-shell for dra7xx-evm * Configuration settings for applications/AGL home screen Change-Id: I925c1babdf2e825c0f68ec1d57107469f3abef09 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-22meta-agl-bsp: More CES 2017 demo hardware support for TI VayuScott Murray3-3/+14
Tweaked the rtl_sdr.cfg fragment for linux-ti-staging to add CONFIG_I2C_MUX, as it is required by the RTL28xx driver Kconfig in newer kernels. As well, added another fragment to linux-ti-staging to enable USB Bluetooth HCI devices so that USB Bluetooth adapters will work on Vayu. Change-Id: Ifd40f25e2159066fea4707a7915ba9b6dee52e0c Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2016-11-21meta-rcar-gen3: add template with hw accelerationYannick Gicquel5-0/+104
this introduce gen3 support with egl & multimedia acceleration. Change-Id: Id816c6ae85e2877a1af9203ef893e1db12db5afc Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-21dra7xx-evm: u-boot: Fix SRCREV + mmc stability fixKarthik Ramanan2-1/+31
The latest u-boot has included some patches that is causing an instability with certain MMC cards This patch fixes the SRCREV to a known commit and includes a stability fix for the MMC Change-Id: I7ba99d36bd713d81409d528e8067e012415b33f0 Signed-off-by: Karthik Ramanan <a0393906@ti.com>