aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2023-01-29systemd: enable iptc PACKAGECONFIGScott Murray1-1/+2
Add iptc to our systemd PACKAGECONFIG tweak so that bridging support will be available in systemd-networkd. Bug-AGL: SPEC-4618 Change-Id: I15d003ad69d6ca59613391beb2e78e3c5fe804cc Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 69e119b969baa88594b3264709e21037aa783bb7) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28417 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-29connman-conf: ignore tap interfacesScott Murray1-1/+1
Add tap* interfaces to the list of interface names that connman should ignore so that it will not conflict with the tap interfaces qemu may set up. This seems safe in general, as a usecase where it makes sense for connman to assign an address to a tap interface is not immediately obvious. Bug-AGL: SPEC-4618 Change-Id: Ic9185e4f93a44c2d9e4265513afc04a2ec4c3d4a Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 29afa2ad9f9d04477c7a80d3a35e83fb6e5227dc) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28416 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-29weston-ini-conf: make remote output configuration dynamicScott Murray2-1/+5
Rework things to also update the remote output configuration fragment based on the value of TRANSMITTER_OUTPUT_HOST. This helps when using different IP addresses for e.g. the KVM demo configuration. Bug-AGL: SPEC-4618 Change-Id: I198ff3e6a30b3968b4749998354a39325c088933 Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 39def8ebd98c98e67304517ab118f9bde4cdf8e7) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28415 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-26Revert "weston-ini-conf: Add agl-shell-grpc-server"octopus_14.93.0octopus/14.93.014.93.0Jan-Simon Moeller1-2/+0
This reverts commit 2f40613cbf42fd378feea57ccefbb3215ecc1355. Reason for revert: This breaks the runtime with: Jan 25 04:07:51 qemuarm agl-compositor[456]: malformed section header: [shell-client-ext]\ncommand=/usr/lib/agl-compositor/agl-shell-grpc-server\n Jan 25 04:07:51 qemuarm agl-compositor[456]: [04:07:51.432] fatal: error opening or reading config file '/etc/xdg/weston/weston.ini'. Change-Id: I09f74614a9d7ec55550d46224ec1c1b96528eb0b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28354 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-26weston-ini-conf: Add weston-ini-landscape-no-activateRoger Zanoni2-0/+17
This change adds an option to use a weston.ini config in landscape mode with automatic activation disabled by default, to be used by wam. Bug-AGL: SPEC-4647, SPEC-4528 Signed-off-by: Roger Zanoni <rzanoni@igalia.com> Change-Id: Ibaeefc4cae07b3f4cb4bbc619bb068fd259d81fc Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28371 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-23Prepare Optimistic Octopus Milestone 3Jan-Simon Moeller1-3/+3
Update the distro configuration. Bug-AGL: SPEC-4677 Change-Id: If68d70f93ec35f9f921083f04779216ea33ca6e0 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28413 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2023-01-23weston-ini-conf: Add agl-shell-grpc-serverMarius Vlad1-0/+2
Now that we have gRPC server implementation start the agl-shell-grpc server by default. Change-Id: I1d00b29306f90ababc5277ecb71a101eea1a46ca Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28364 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-23agl-shell-activator_git: Bump SRCREVMarius Vlad1-2/+2
This SRCREV bump adds gRPC support and removes agl-shell-desktop support. Change-Id: I946a9563321a6d9b5c756a364726fd3037ba5b63 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28363 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-23agl-compositor_git: Bump agl-compositor SRCREVMarius Vlad1-2/+3
This SRCREV bump includes the addition of agl-shell-grpc-server, an interface to agl-shell-desktop protocol, but instead of using wayland connection it uses Google's RPC. For the time being there's only a client using it, and that is agl-shell-activator. The plan is to phase out agl-shell-desktop entirely and use this interface as a way to perform additional window management. Further more this bump also includes a couple of connector hot-plug fixes and renames hide-cursor to disable-cursor entry section to better reflect its name. In more detail the following changes have been added: - 7ef34e0c465a7596 shell: Verify agl-shell version for bound_ok/bound_fail - c01b90ece22cc587 shell: Add fallback agl-shell version 1 - 0907e87f1576f8ad input: Fix minor issue while reporting disable cursor - c9d3edb4ee23a563 input: Rename hide-cursor to disable-cursor - 76fa1b83638310c2 src: Verify if the output is present - 79eac214d4866d84 src: Further hotplug connector fixes - 59375972f5642b7e grpc-proxy: Init gRPC - 0b766cf978b8b100 shell: Not not override the agl_shell interface resources - c42f50b567a0d5ad shell: Add a wrappers for sending events with agl-shell - 05bb0384732480a9 compositor: Allow to start other clients - 14a1292a39377472 agl-shell.xml: Introduce a new interface - 33997a7c96838795 compositor: Handle output destruction deferral Change-Id: I6df1d7fcf6d5d3abcc3c1c2b8a0cf820368a26de Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28318 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-22Exempt nfsroot and nbdroot from systemd-networkdJan-Simon Moeller2-2/+4
We need to exempt these in our wired configuration is using nbdroot or nfsroot. Likewise we can relax the connman settings again. Change-Id: I10fb9c97db1aba04941bf33f3e9d8a06a963cfac Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28406 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2023-01-20weston/0001-simple-touch-Add-maximized-fullscreen: Add maximized/fullscreen ↵Marius Vlad2-1/+138
for simple-touch simple-touch wasn't able to resize itself to max/fullscreen to this patch adds support for that. It is quite useful to have this client test out touch support, so we can re-use it whenever, for instance in the virtio aarch64 machine to test if we have indeed or not a touchscreen device. Upstream-Status: Submitted See: https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/1095 Bug-AGL: SPEC-4656 Change-Id: I974b4c5ea8a85f1b3efe4a114f345de948441300 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28314 Tested-by: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-01-07files/group: add render group with static ID for new systemdDenys Dmytriyenko1-0/+1
Yocto Project 4.0.6 now comes with systemd v236, which uses render group: https://git.openembedded.org/openembedded-core/commit/?h=kirkstone&id=f902338f312cf5c55b2857e5c7e980cb11a26a9c https://git.openembedded.org/openembedded-core/commit/?h=kirkstone&id=ba1db7f9189526b02e3d75d375ece53953c2e942 Bug-AGL: SPEC-4668 Change-Id: I473644f4b9e57663f036b43a48a8319e4d664d65 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28369 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-30virtualization-layer/recipes-graphics/mesa: Workaround for virglMarius Vlad2-0/+37
This is a just a workaround for the time being, to avoid some graphical artefacts seen only when booting up for the first time the image. Introduced with https://gitlab.freedesktop.org/mesa/mesa/-/commit/6f68cacf619f7f13bc870355709224c1f3e9bbd8. Bug-AGL: SPEC-4651 Change-Id: Ie2ac5d170790293dc5860d5f27f26ee811f4a4b5 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28300 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Tested-by: Jenkins Job builder account
2022-12-30systemd-conf-canbus: Add link configurationScott Murray2-2/+17
Add a .link file to set the transmit queue length to 1000 for physical CAN devices. This matches the default used for vcan devices, and in testing fixes the transmit buffer overflows when running the simulator script against an interface. Bug-AGL: SPEC-4652 Change-Id: Icb190cdcbda9b09e337789d3a88e39f7288f34eb Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28291 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-12-18Prepare Optimistic Octopus Milestone 2octopus_14.92.0octopus/14.92.014.92.0Jan-Simon Moeller1-3/+3
Update the distro configuration. Bug-AGL: SPEC-4650 Change-Id: Ibf5234fb83798df32e4b0f9eccb19419a0740f82 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28298 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-12-16linux: config: add systemd sandboxing fragmentDenys Dmytriyenko2-0/+10
Add a kernel config fragment that enables additional features needed for systemd sandboxing support, using Classic BPF (Berkeley Packet Filter) kernel framework. Eventually this will be extended with more advanced features using eBPF (extended BPF), BTF (BPF Type Format) and LSM (Lunux Security Module) frameworks. Bug-AGL: SPEC-4627 Change-Id: I9ed21c654b2e0298be66073750dab6920e49b0c9 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28297 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-16linux: config: move CONFIG_AUDIT* into own fragmentDenys Dmytriyenko3-2/+3
Enabling CONFIG_AUDIT* is needed by auditd and should be safe whether systemd is used or not and is not specific to SELinux. Note that systemd README has this old caveat mentioned | Note that kernel auditing is broken when used with systemd's | container code. When using systemd in conjunction with | containers, please make sure to either turn off auditing at | runtime using the kernel command line option "audit=0", or | turn it off at kernel compile time using: | CONFIG_AUDIT=n | If systemd is compiled with libseccomp support on | architectures which do not use socketcall() and where seccomp | is supported (this effectively means x86-64 and ARM, but | excludes 32-bit x86!), then nspawn will now install a | work-around seccomp filter that makes containers boot even | with audit being enabled. This works correctly only on kernels | 3.14 and newer though. TL;DR: turn audit off, still. But that seems to only apply to nspawn usage in some specific cases and on older kernels, plus there are even runtime workarounds available when needed, so let's enable it by default. Bug-AGL: SPEC-4627 Change-Id: I5fcd58ba41929d2966fadea27b6751e4fa6589c9 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28276 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-16linux: config: enable kernel settings that systemd requiresDenys Dmytriyenko2-0/+44
Add kernel config fragment with all settings required by systemd. Some more generic settings need to be explicitly set here as well to satisfy necessary dependencies from systemd settings down the tree, otherwise some BSPs would break. Bug-AGL: SPEC-4627 Change-Id: I7a2796ea65da58a4f1fa0556cd94df67e7df7db9 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28275 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-10meta-app-framework: Add Flutter app icon installationScott Murray1-0/+8
Add logic to agl-app.bbclass to install an icon for Flutter apps if there is one present as ${AGL_APP_ID}.svg in a "package" directory in their source repository. Bug-AGL: SPEC-4634 Change-Id: If48cb5b085f74a713e293d6554c45d265f69f686 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28155 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-12-10Update cluster network configurationScott Murray3-3/+3
Update configuration files as appropriate with the IVI board as 192.168.10.2 and the cluster as 192.168.10.3. Bug-AGL: SPEC-4632 Change-Id: Idd41daa75fc6258d07d8f654848e78ced85dff35 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28154 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-12-10systemd-conf-canbus: Add FD configurationScott Murray2-0/+13
Add canbus-can-fd.network configuration that can be selected via CANBUS_NETWORK_CONFIG. Bug-AGL: SPEC-4633 Change-Id: Ic662be3e991910a4b35e114f144fe399a88ce477 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28153 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-12-08libsdl2: PACKAGECONFIG tweaksScott Murray2-0/+4
Add a couple of bbappends for libsdl2 to tweak its PACKAGECONFIG, based on Panasonic QEMU+KVM documentation. Bug-AGL: SPEC-4618 Change-Id: I7ceb4e46faa88f09311ad359a3b0b13a462f6cb2 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28192 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account
2022-12-08linux-yocto: Rework virtio-aarch64 kernel configurationScott Murray4-1/+18
Changes: - Appending the virtio kernel metadata to SRC_URI in the linux-yocto bbappend was having the side-effect of overriding a lot of the changes from the other AGL configuration fragments. To avoid this, prepend the addition to AGL_KCONFIG_FRAGMENTS instead. - Add the HDA sound driver config fragment for virtio machines to allow using the QEMU emulation. - Add config fragment for the virtio kernel to ensure that CONFIG_DRM and the fbdev emulation are on. - Add config fragment for the virtio kernel to turn on CONFIG_PCI, as there are some peripherals that we may need to expose to guests with it. This and the DRM changes will be rationalized in the metadata repo once it's clear we do need them. Bug-AGL: SPEC-4618 Change-Id: I453b84d9840498772afd01404dd374f5c1d245da Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28191 ci-image-build: Jenkins Job builder account Tested-by: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-08linux: config: move BBE-specific fragment from meta-agl-core to meta-agl-bspDenys Dmytriyenko3-1/+1
Commit d009fa0c42042a0b7d069779852953621e46469b as part of SPEC-4156 added a kernel config fragment to disable CONFIG_RELAY. Since this fragment is only applied to BBE, there's no need for it to reside in meta-agl-core and can be moved to meta-agl-bsp/meta-sancloud. Bug-AGL: SPEC-4156 Change-Id: I5da2632d6eb00bbf99ddb48cef861564d2ce868d Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28203 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-12-08linux-agl-config: correct override syntax for virtualmachineDenys Dmytriyenko1-1/+1
Commit dd6fc5dcaa0a027b7651bb365d5dd0f623498f8f as part of SPEC-4052 converted all overrides to the new syntax, but missed the one used for "virtualmachine" Bug-AGL: SPEC-4052 Change-Id: I1905c7e3b70b05c4ef06d8b4f240d0e144587fab Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28204 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23Prepare Optimistic Octopus Milestone 1octopus_14.91.0octopus/14.91.014.91.0Jan-Simon Moeller1-2/+2
Update the distro configuration. Bug-AGL: SPEC-4616 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iba55e4e0e51bfec2a1949a0fc9775760a6a8732b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28177 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-11-23meta-agl-core: systemd: Disable `BitRate` setting for `can*` network for VIRTIO.Vasyl Vavrychuk5-4/+33
VIRTIO CAN [1] does not support bitrate configuration, it assumes bitrate configuration is done on backend. Fixes systemd-networkd failure: can0: Failed to set CAN interface configurations: Operation not supported File `canbus-virtio-can.network` is copied from `canbus-can.network` with `BitRate=` setting removed. v2: rework patchset to use own systemd-conf-canbus package to avoid changes in main systemd package. [1]: https://lists.oasis-open.org/archives/virtio-dev/202208/msg00159.html Bug-AGL: SPEC-4597 Change-Id: Idb132203501bb99103e76098eea3bb6394b645da Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28104 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23weston-ini-conf: add virtio-aarch64 configurationScott Murray1-0/+1
Add a WESTON_DISPLAYS tweak for the virtio-aarch64 machine so the demo platform image gets the required weston configuration when built for it. Bug-AGL: SPEC-4618 Change-Id: I90974a25d51fc3b4ad3d8e9450d98f8ae82f759a Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28187 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23native-shell-client: Add recipeScott Murray1-0/+16
Add recipe for native-shell-client simple agl-shell protocol client. It can be used for testing agl-compositor and also enables using it in simple usecases such as displaying the output from guest VMs with QEMU+KVM. Bug-AGL: SPEC-4618 Change-Id: I16b7c8b703b2aa3c875b7ffd78b24021eafd3a7f Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28186 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23meta-agl-bsp: Add overrides to rcar3 BSP changesScott Murray3-26/+24
The various configuration changes done by the include files for the rcar3 machines in meta-agl-bsp prove problematic when using a rcar3 machine in a multiconfig configuration with different machines in other configs. This can potentially be avoided in the future with a significant rework of the local.conf generation in aglsetup.sh, but for now, too avoid issues, add rcar-gen3 or h3ulcb overrides to the variable changes in those files. That ensures that the changes will only apply to the specific machine being targeted. So far this has only been tested with the h3ulcb, it is likely that more fixes are required for other rcar3 machines, as well as the machines from other BSPs. Bug-AGL: SPEC-4618 Change-Id: Ifa6735337e673a92c56d5457b97d09a5b86cc0e1 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28185 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23agl-compositor: RDEPENDS fixesScott Murray3-2/+2
Changes: - Add the required xkeyboard-config RDEPENDS to the agl-compositor recipe to avoid surprises if nothing else that pulls that in is in an image. - Move the agl-compositor RDEPENDS on polkit directly into the recipe instead of getting indirectly via a meta-oe presence driven addition to packagegroup-agl-graphical-weston. This is more correct, avoids surprises if that packagegroup happens to not be used, and will work better with a binary packagefeed. The RDEPENDS is still conditional on the presence of "polkit" in DISTRO_FEATURES, which seems a reasonable alternative to using dynamic-layers. Bug-AGL: SPEC-4619 Change-Id: I595f55a9d598b4a15fe345f50d1a7a203616dd15 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28184 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-21agl-compositor: Bump SRCREVScott Murray1-1/+1
Bump agl-compositor SRCREV to pick up: adf173e layout: Allow background surface roles (to) be activated 77d94d8 agl-shell: Add support for defining an activation area Bug-AGL: SPEC-4594 Change-Id: I4d003c4ce26fe3e6b3e3fe07b845538a5a9e508c Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28181 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-11-21Enable qemu and kvm user and groupJan-Simon Moeller2-0/+3
This supports the meta-virtualization layer. Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I919f9669c0c9aff83d6f0b961d892eb6077902a6 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28055 Tested-by: Jenkins Job builder account
2022-11-21Exempt also nbd.server in connman serviceJan-Simon Moeller1-1/+2
This adds a check for the nbd.server kernel commandline and prevents connman service from being started. If nbdroot is set and the networkinterface is resetup, then the rootfs will fail. Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Ic15fade35fd2c47b828e51692609d438225ef739 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28054 Tested-by: Jenkins Job builder account
2022-11-13meta-agl-bsp: Fix rc.pvr.service dependency for meta-rcar-gen3Scott Murray1-0/+7
Undo the out of date tweak of rc.pvr.service to make it a dependency of weston@.service done in meta-rcar-gen3's gles-user-module recipe. For now, just tweak the dependency back to weston.service in our bbappend in meta-agl-bsp, this can be removed when meta-rcar-gen3 includes a fix. Bug-AGL: SPEC-4607 Change-Id: I16ef13d2af9b2ed485ce8b98501f39bf96aba3e2 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28133 ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-10-24meta-agl-core-test: delete the layer of meta-agl-core-testduerpei22-526/+0
'meta-agl-core-test' is no longer maintained. Some useful test sets will be moved to 'meta-agl-devel/meta-agl-test' later. Bug-AGL: SPEC-4345 Signed-off-by: duerpei <duep.fnst@fujitsu.com> Change-Id: I5939157618f9817a06ef5e023b6e8e3ad5fc59af Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28058 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-10-18agl-compositor_git.bb: Bump SRCREVMarius Vlad1-1/+1
This SRCREV bump update brings in a helpful way to designate a certain area such that the compositor would use it when activating applications, rather than using the entire output. When not having panels the background surface would cover the entire output, making it impossible to keep visible areas of the background surface and, in the same time, display another's application surface. While the solution would be use panels specifically designed to handle this case, that's not always possible. We circumvent that by having this area specified manually in this update, with a direct follow-up to have a request in the agl-shell protocol that specifies that area programmatically. Besides that change, a few more changes made it through, all of them being added from upstream and adapted from weston to the AGL compositor, mostly related to how we handle signals. In detail the following changes made it through since the last SRCREV bump update: - 924473ef016b Add manual activation area configuration option - 897449688a9c compositor: Use sigaction to trap SIGINT - e8761762fcd0 compositor: Add missing SIGCHLD handler - 315496ddbb9f compositor: Stop trapping SIGQUIT - f980c0d90329 shell: Rewrite client_exec as client_launch - edb6d397a4c6 process-util: Move Xwayland fork helpers to shared - 86146a4e7455 shared: add str_printf() - 1b93121761e1 shared: introduce os_fd_clear_cloexec() Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I23e0aba9f2b77cab4fe81754a8feaeebb7cea340 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28056 ci-image-build: Jenkins Job builder account Tested-by: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-10-08meta-app-framework: applaunchd: run under a separate userDenys Dmytriyenko5-3/+9
Since applaunchd needs to start/stop systemd units, the user is granted elevated systemd unit-management permissions via PolKit policy. If applaunchd and all the apps run under the same agl-driver user, all the apps have these elevated systemd permissions too. Separating them into different users allows removing elevated systemd unit-management permission from individual apps, but leaving such permission for applaunchd, which enhances overall security of the system. - add new applaunchd user and group - switch applaunchd (gRPC) service to be started under new user - since HTML5 apps haven't migrated to gRPC yet and still use D-Bus API, applaunchd-dbus gets activated by agl-session and runs under agl-driver - temporarily add agl-driver user into the applaunchd group and switch PolKit policy to check for applaunchd group, instead of the user - once D-Bus API is completely deprecated, agl-driver user can be removed from applaunchd group Bug-AGL: SPEC-4579 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Change-Id: I75384177578bba6cb458a81df6a9dc1738c972e0 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28039 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-10-07Update bbe machine template for kirkstonePaul Barker1-1/+1
The meta-ti layer has now been split into two sub-layers so we need to update BBLAYERS. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Change-Id: Iacb6940d55cb4c8dc60b3caae124cd2cd3295abe Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28042 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-10-07Revert "meta-agl-bsp: meta-sancloud: Revert problematic kernel commit"Paul Barker2-49/+0
This reverts commit a12a83ebdfcd4287264e50edf3b11a156f418ae9. The patch is no longer needed as the kernel version used by linux-bbe has been updated. Change-Id: I2ea6fd05b99018517fb2e1f3f03153dfd4ccd0e8 Signed-off-by: Paul Barker <paul.barker@sancloud.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28043 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-25weston-ini-conf.bb: Change from append to an inline editMarius Vlad1-2/+1
We don't really support section entries with the same name, so rather than appending a new key entry value under the same section, use sed to edit the configuration file in place. Fixes 6a8a33f99a66ae1 Bug-AGL: SPEC-4528 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I12b982dd7e6dd8d11e5fb373c8cba0b1e762c485 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28019 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-25Add openssh-sftp-server when agl-devel is onJan-Simon Moeller1-0/+1
For simplified development workflows on newer host distros add the sftp server. Bug-AGL: SPEC-4443 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I580e5d342fb6afb286b00d41b03c98a9b936160f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28018 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Marius Vlad <marius.vlad@collabora.com>
2022-09-22virtualization/linux-yocto: Support linux-yocto-dev for VIRTIO.Vasyl Vavrychuk1-0/+10
Bug-AGL: SPEC-4453 Change-Id: Id4dd3c3543dedf15cf09956414f32face685e498 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27881 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-22virtualization/linux-yocto: For kernel metadata use git repository instead ↵Vasyl Vavrychuk14-245/+11
of local files. This will allow using branches for supporting multiple kernel versions more easily. Note, that BSP description root file virtio-aarch64-standard.scc has to be kept local withing a recipe. This is needed to add this scc file explicitly to SRC_URI to have AGL VIRTIO patches applied during kernel recipe build. As explained in [1, 2], Yocto kernel metadata is commonly used for two purposes: 1. To construct Yocto kernel git by committing patches listed in scc files. 2. To configure Yocto kernel during Yocto build. When scc file is not explicitly added to SRC_URI, then patch commands will be ignored during Yocto build because it is assumed that patches are already pre-applied during Yocto kernel git tree construction. But, there is not AGL Linux kernel tree, only a repository for AGL kernel metadata (this one). So, patches from this metadata repository have to be applied during kernel recipe build. On the other hand, to ignore patches from YP kernel metadata (which are already pre-applied), standard.scc is included with `nopatch` keyword. [1]: https://www.yoctoproject.org/pipermail/yocto/2019-October/046986.html [2]: https://docs.yoctoproject.org/kernel-dev/maint-appx.html Bug-AGL: SPEC-4452 Change-Id: Idde8e507eb18fa26e6a5b84ab8443576badb58bf Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27878 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-22weston-ini-conf: Add weston-ini-config-no-activateMarius Vlad2-0/+17
This patch adds a way to tick dynamically activate-by-default to false, and provide a safe migration towards disabling by default activation entirely. We do this with just only the Qt toolkit and will proceed with WAM/chromium once that has support as well for this. Bug-AGL: SPEC-4528 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I3573ea92d3ea865db223bd01e58b9ec202cfa7ae Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27990 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-22agl-compositor_git.bb: Bump SRCREV to grab latest changesMarius Vlad1-1/+1
This SRCREV bump update for the AGL compositor includes two new protocol updates, one that adds two new events, specifically bound_ok, bound_fail which would allow clients to determine if they're in charge of managing panels and background surfaces. The other protocol update fixes an issue with activation by default of applications but also paves the way to move out bits from the agl-shell-desktop protocol to just the agl-shell protocol. Note that the shell client supporting the latest change of the protocol will need to add at least add stubs for the v2 of the protocol, even if v2 isn't required to be supported at all. Updates to version 3 of the protocol will be required once we'll switch out from activation by default from true to false and finally remove support from the compositor entirely and let the shell client be the one in charge for activation. Additionally, this bump includes a few fixes, most notable handling remote surface roles much better, including migration, in real time of applications from one output to another, making possible a back-and-forth movement of applications. In more detail the following changes have been included: - d08a5b2010f6e6 desktop: Do not attempt to send terminate event - 0512e7251611e7 protocol/agl-shell.xml: Add an app_state event -- app state notification - bb730ca304a5f6 layout: Handle dynamic application/surface movement between outputs - b92397ef12626a shell: Remove the black curtain installed on outputs - 372eb222b17bbc layout: Detect when an application should be migrated to other outputs - 39c91d5ccae3b6 desktop: Avoid sending the dimensions for the first output - a99d56dad0ad4a layout: State explicity the output - fc783c19e6f6b9 layout: Use view's mapping once we placed the view in the hidden layer - e1b15f95e834ac desktop: Install a black background for REMOTE roles - bb79d12c92fa6e desktop: Include REMOTE role in initial configuration - 3e72564852a6f3 agl-shell: Add bound_ok and bound_fail events and a default destructor Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I25c53e9d69270651cd40c7ee9ec3edce28f899a6 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27989 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-21meta-app-framework: applaunchd: update for gRPC additionScott Murray2-2/+21
Changes to facilitate building gRPC enabled versionm of applaunchd: - Bump SRCREV to pick up gRPC changes - Add required protobuf and gRPC dependencies to DEPENDS - Add new systemd unit for standalone gRPC API daemon Bug-AGL: SPEC-4559 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I21778f27b2eabd952e983b4571de05ad5d6c5af2 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27984 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-16Change master branch name to octopusJan-Simon Moeller1-5/+5
Long live the new codename 'Optimistic Octopus'. Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I1f12f334a2082ffa813cb453aa976ef5f995732c Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27998 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2022-09-07meta-agl-bsp: arm-trusted-firmware: Change the way how ↵Vasyl Vavrychuk2-33/+3
RCAR_BL33_EXECUTION_EL is set to not conflict with other layers. Replace '0001-Boot-Normal-World-in-EL2.patch' which conflicts with: meta-agl-refhw/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/files/0001-Boot-Normal-World-in-EL2.patch Bug-AGL: SPEC-4532 Change-Id: Ia0291030748e7c7c51c4a706df1994275dffcdf7 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27938 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Scott Murray <scott.murray@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-09-01weston_10.0_aglcore.inc: Update wl_output to version 4Marius Vlad2-1/+118
This allows clients to query the output name and description name as seen by the compositor. Previously this was only possible only with xdg_output_manager extension but a recent update to the core wayland protocol allows us to do just that. Patch is posted upstream https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/987, but will take some time to get in, as we're in the process of a release. Bug-AGL: SPEC-4530 Signed-off-by: Marius Vlad <marius.vlad@collabora.com> Change-Id: I709b941a220e9906078944ee585435df7141d448 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27949 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>