Age | Commit message (Collapse) | Author | Files | Lines |
|
This brings up two major bits of functionality: the introduction of the
agl-shell-desktop protocol, which should be used by regular
application(s) to activate/switch other to other applications, and
the introduction of the policy API and with it, a default allow-all
kind of policy engine.
In more details, the following changes have been included:
- fcd71e034d378921e layout: Mark activated surface by default
- 1ee1bff64338dede1 desktop: Remove the active surface only if matches the one being displayed
- 0e66ee13b73e3ca21 meson.build: Increase the build version of agl-compositor
- 721d4d4f73e5d30ce README.md: Start adding some light documentation on the policy part
- 0a932bc7d66b062e6 layout: Allow by default to activate the application
- 58a3fe5c292349916 policy-default: Install a default policy engine
- 98457c49f5d777e40 policy: Init policy framework API
- fe3358fa9b560a43e ivi-compositor: Use the helpers for array length
- 6491e204fd4a9bd2d meson.build: Do another agl-compositor version bump
- 72aa326d8f54ad75c meson.build: Install agl-shell-desktop extension
- 786f91bd280b83049 protocol: Advertise the applications to regular clients
- a35a7f2e5cc20bd40 protocol: Add agl-shell-desktop protocol
This patch also installs the agl-shell-desktop XML file.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: Icaec7e375242a0266383523806e5eca40d75b652
|
|
The cleanup done in commit de577de9 ("Consolidation of
AGL_DEFAULT_IMAGE_FSTYPES after review of machine use") inadvertently
removed the wic.{xz,bmap} additions that were done in commit cdbe6578
("Extend qemux86-64 images to support real hardware"). Add them to
AGL_EXTRA_IMAGE_FSTYPES for qemux86-64 so that they will be available
for use on physical hardware again.
Bug-AGL: SPEC-2931
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I7ea9cc195add6d015390c7b2b359234f0bfeaaea
|
|
Update app-framework-main SRCREV in af-main recipe to pick up:
6c44e65 Merge "Update weston dependency in afm-system-setup.service"
f86501b Update weston dependency in afm-system-setup.service
Bug-AGL: SPEC-3309
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I62317a543ceba7bced2f40e512bfdaca01202b5f
|
|
This reverts commit b8bc5c0f601c5a2f385b3141d2da5b13d0e04599
to roll back SRCREV for agl-service-homescreen.
agl-service-homescreen's commit 055909f introduces the bug
described by SPEC-3326.
Bug-AGL: SPEC-3326
Change-Id: If983e353c72c8623700c46a1a34f1cd319a9fc45
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
|
|
This change introduce signature of widgets with
sample keys and certificates of app-framework-main
when the feature agl-devel is selected.
It also shows how to sign widgets in yocto build
environment, using WGTPKG_AUTOSIGN_X environment
variables.
v2: Use an own agl feature for the signing and not agl-devel
This allows us to switch it on selectively.
Bug-AGL: SPEC-2840
Change-Id: I8f66c25a2ae62ad2365c7cdb995049c00b7c780a
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
Update SRCREV to pick up:
e57b4f7: add missing overrides in ResponseMessage
Bug-AGL: SPEC-3112
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
Change-Id: I5b7f06cbb0a76a87b9ead87054f00a08fd5d1446
|
|
Update SRCREV to pick up:
055909f: Update autobuild script to create new targets
Bug-AGL: SPEC-2049
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
Change-Id: I54668759153a2deedd14741412943e372f9c9262
|
|
Replace the long ago deprecated and now no longer supported
"-usbdevice tablet" option with the newer "-device usb-tablet"
in the QB_OPT_APPEND definition in our local x86_64 tuning file.
Without this, runqemu fails for the qemux86-64 target on dunfell.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I46fcbc615821e7ac54a913ca08b66abf2abaaa0b
|
|
When I switched AGL over to using upstream OE's template unit scheme for
running weston as non-root for the zeus upgrade, I missed the dependency
in weston-ready.service, update it to weston@display.service to match
the new configuration.
Bug-AGL: SPEC-3309
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I0814ae0807bd8d9d6f27e9a0c2e1238f0e89ba7c
|
|
Update SRCREV to pick up:
0ed292d: rework message hierarchy
Bug-AGL: SPEC-3112
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
Change-Id: Ia5999b139ee33d77169def4ecb9b1dd8a1d70d50
|
|
We re-use the OpenEmbedded / Yocto Project style to
declare the licenses more prominently in the top level folders.
LICENSE is derived from poky's LICENSE file.
Bug-AGL: SPEC-3295
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I059b5b42beb0d422ad2e679e958588240b5d8989
|
|
Netboot is not obeying usrmerge distro feature therefore it is
not compatible with agl-sota.
Bug-AGL: SPEC-3097, SPEC-3130
Change-Id: I8beda358df90b5fc052b68964f4c27379622f2d3
Suggested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Signed-off-by: Patrick Vacek <patrickvacek@gmail.com>
Change-Id: Ifdb2281a9740f9c362aef9ab585959679050826d
|
|
Improve readability by using 'if' and by
indenting correctly.
Bug-AGL: SPEC-2840
Change-Id: I55065e0e4c7bf82a4e093544f30ca6eacf33b882
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
To save space and download bandwith, we use the compressed format in CI.
Also adapt the inclusion of the guest drivers to the compressed image.
Bug-AGL: SPEC-2771
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I140fb31954be5ec2b46596a9816087d3fb670416
|
|
This removes the distinction between versions of widgets.
This change can fix issue in starting of applications
due to systemd changes (SPEC-3178)
Includes changes:
* dee2725 Update .gitreview file
* 7f53b81 Merge "system setup: Fix settings on /run/user"
* a855d14 Remove distinction of widget's version
* 4f88827 Fix homescreen start on yocto/Zeus
Bug-AGL: SPEC-3178
Bug-AGL: SPEC-2538
Change-Id: Ibce8316dd9513ad2f5d6d4f1fbea3119d78d0417
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
The commit b1c5541c2 introduced a 'mkdir -p ${systemd_system_unitdir}'
which should be prefixed with ${D}.
It produces a build error (permission denied on do_install).
Fix it.
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: Ife8b374379937e87cf3c045f105c3eb121f0941d
|
|
The reproducible_build class will use the SOURCE_DATE_EPOCH
mechanism to preset a known timestamp during
compilation of binaries to help ensure
binary reproducability.
With this mechanism we reach very good reuse across rebuilds
with basically just 2 packages changed (and these are expected):
dl9pf@elrond:~/repobuild-local/build-x86-64-repro> bitbake agl-demo-platform-crosssdk
Sstate summary: Wanted 17 Found 8 Missed 9 Current 4282 (47% match, 99% complete)
--------------------------------------------------------------------^^^ !!
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Tasks Summary: Attempted 10048 tasks of which 10025 didn't need to be rerun and all succeeded.
-------------------------------^^^^^^^^^^^^^^^^^^^^^^^^^^ just 13 tasks !!
NOTE: Build completion summary:
NOTE: do_populate_sysroot: 0.0% sstate reuse(0 setscene, 1 scratch)
NOTE: do_package_qa: 0.0% sstate reuse(0 setscene, 2 scratch)
NOTE: do_package: 0.0% sstate reuse(0 setscene, 1 scratch)
NOTE: do_packagedata: 0.0% sstate reuse(0 setscene, 1 scratch)
NOTE: do_package_write_rpm: 0.0% sstate reuse(0 setscene, 2 scratch)
NOTE: Writing buildhistory
dl9pf@elrond:~/repobuild-local/build-x86-64-repro> buildhistory-diff HEAD^ | sort
Changes to images/qemux86_64/glibc/agl-demo-platform-crosssdk (files-in-image.txt):
/var/lib/dnf/yumdb/d/4e1ef2f15bdf12ac2dcba29f87bee13623f1676d-distro-build-manifest-1.0-r0-qemux86_64/checksum_data was added
/var/lib/dnf/yumdb/d/4e1ef2f15bdf12ac2dcba29f87bee13623f1676d-distro-build-manifest-1.0-r0-qemux86_64/checksum_type was added
/var/lib/dnf/yumdb/d/4e1ef2f15bdf12ac2dcba29f87bee13623f1676d-distro-build-manifest-1.0-r0-qemux86_64/command_line was added
/var/lib/dnf/yumdb/d/4e1ef2f15bdf12ac2dcba29f87bee13623f1676d-distro-build-manifest-1.0-r0-qemux86_64/from_repo was added
/var/lib/dnf/yumdb/d/4e1ef2f15bdf12ac2dcba29f87bee13623f1676d-distro-build-manifest-1.0-r0-qemux86_64/installed_by was added
/var/lib/dnf/yumdb/d/4e1ef2f15bdf12ac2dcba29f87bee13623f1676d-distro-build-manifest-1.0-r0-qemux86_64/reason was added
/var/lib/dnf/yumdb/d/4e1ef2f15bdf12ac2dcba29f87bee13623f1676d-distro-build-manifest-1.0-r0-qemux86_64/releasever was added
/var/lib/dnf/yumdb/d/4e1ef2f15bdf12ac2dcba29f87bee13623f1676d-distro-build-manifest-1.0-r0-qemux86_64 was added
/var/lib/dnf/yumdb/d/8ea1dc59afc8b04e7a013cdc38eb3bbaddeb37f6-distro-build-manifest-1.0-r0-qemux86_64/checksum_data was removed
/var/lib/dnf/yumdb/d/8ea1dc59afc8b04e7a013cdc38eb3bbaddeb37f6-distro-build-manifest-1.0-r0-qemux86_64/checksum_type was removed
/var/lib/dnf/yumdb/d/8ea1dc59afc8b04e7a013cdc38eb3bbaddeb37f6-distro-build-manifest-1.0-r0-qemux86_64/command_line was removed
/var/lib/dnf/yumdb/d/8ea1dc59afc8b04e7a013cdc38eb3bbaddeb37f6-distro-build-manifest-1.0-r0-qemux86_64/from_repo was removed
/var/lib/dnf/yumdb/d/8ea1dc59afc8b04e7a013cdc38eb3bbaddeb37f6-distro-build-manifest-1.0-r0-qemux86_64/installed_by was removed
/var/lib/dnf/yumdb/d/8ea1dc59afc8b04e7a013cdc38eb3bbaddeb37f6-distro-build-manifest-1.0-r0-qemux86_64/reason was removed
/var/lib/dnf/yumdb/d/8ea1dc59afc8b04e7a013cdc38eb3bbaddeb37f6-distro-build-manifest-1.0-r0-qemux86_64/releasever was removed
/var/lib/dnf/yumdb/d/8ea1dc59afc8b04e7a013cdc38eb3bbaddeb37f6-distro-build-manifest-1.0-r0-qemux86_64 was removed
/var/lib/dnf/yumdb/o/3198ffc9414564ec5ff5f321629f314fac69fc78-os-release-1.0-r0-noarch/checksum_data was removed
/var/lib/dnf/yumdb/o/3198ffc9414564ec5ff5f321629f314fac69fc78-os-release-1.0-r0-noarch/checksum_type was removed
/var/lib/dnf/yumdb/o/3198ffc9414564ec5ff5f321629f314fac69fc78-os-release-1.0-r0-noarch/command_line was removed
/var/lib/dnf/yumdb/o/3198ffc9414564ec5ff5f321629f314fac69fc78-os-release-1.0-r0-noarch/from_repo was removed
/var/lib/dnf/yumdb/o/3198ffc9414564ec5ff5f321629f314fac69fc78-os-release-1.0-r0-noarch/installed_by was removed
/var/lib/dnf/yumdb/o/3198ffc9414564ec5ff5f321629f314fac69fc78-os-release-1.0-r0-noarch/reason was removed
/var/lib/dnf/yumdb/o/3198ffc9414564ec5ff5f321629f314fac69fc78-os-release-1.0-r0-noarch/releasever was removed
/var/lib/dnf/yumdb/o/3198ffc9414564ec5ff5f321629f314fac69fc78-os-release-1.0-r0-noarch was removed
/var/lib/dnf/yumdb/o/7d7c5992be19f3a2a9e2077fb422129ab40d49ea-os-release-1.0-r0-noarch/checksum_data was added
/var/lib/dnf/yumdb/o/7d7c5992be19f3a2a9e2077fb422129ab40d49ea-os-release-1.0-r0-noarch/checksum_type was added
/var/lib/dnf/yumdb/o/7d7c5992be19f3a2a9e2077fb422129ab40d49ea-os-release-1.0-r0-noarch/command_line was added
/var/lib/dnf/yumdb/o/7d7c5992be19f3a2a9e2077fb422129ab40d49ea-os-release-1.0-r0-noarch/from_repo was added
/var/lib/dnf/yumdb/o/7d7c5992be19f3a2a9e2077fb422129ab40d49ea-os-release-1.0-r0-noarch/installed_by was added
/var/lib/dnf/yumdb/o/7d7c5992be19f3a2a9e2077fb422129ab40d49ea-os-release-1.0-r0-noarch/reason was added
/var/lib/dnf/yumdb/o/7d7c5992be19f3a2a9e2077fb422129ab40d49ea-os-release-1.0-r0-noarch/releasever was added
/var/lib/dnf/yumdb/o/7d7c5992be19f3a2a9e2077fb422129ab40d49ea-os-release-1.0-r0-noarch was added
Later, we will bump the default EPOCH timestamps
with the releases/point releases.
References: https://reproducible-builds.org/
Should be backported to halibut as well.
v2: add change to distro configuration
Bug-AGL: SPEC-2769
Change-Id: I83e1d92eadf838291f03a184a804a9b8b72f7809
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
After reviewing what all machines actually specify as 'extra', the conclusion was
that the actual 'default' is 'wic.xz' .
Consequently make this the new default and remove it from the board configs.
v2: add ext4/ext4.xz for netboot feature
Bug-AGL: SPEC-2771
Change-Id: I082f87a07dcacb962d10efd90ba2476f87896302
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add new machines to build with AGL:
- h3-salvator-x-nogfx
- h3-salvator-x
- m3-salvator-x-nogfx
- m3-salvator-x
Bug-AGL: SPEC-3169
Change-Id: I0cfa838ad40f8afda01aeb693fbf595bad8b4730
Signed-off-by: Duy Dang <duy.dang.yw@renesas.com>
|
|
Backported upstream patchset to fix CAN failures with SocketCAN
* net: sch_generic: Use pfifo_fast as fallback scheduler for CAN hardware
Additional patchset for 4.14 kernels to bring in needed if_afp.h header
Bug-AGL: SPEC-3171
Change-Id: I1ddb75d1aca64861cfc52f1df4ff810bd0367ab9
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
When the client reconnected, it used the wrong type
and reconnected as server leading to unexpected
state with faults.
Include:
* 7901c6d afb-stub-ws: fix bug in reconnection
Bug-AGL: SPEC-3272
Change-Id: I3ad0987be094527f2a3a980a3a99f397b704f3ee
Signed-off-by: Jose Bollo <jose.bollo@iot.bzh>
|
|
Xen is enabled for the R-Car M3 ulcb board only. Note that it is
optional to run Xen, the non-Xen binaries are still there and can be
run exactly as before.
Bug-AGL: SPEC-2912
Change-Id: Ica57afd4d067de4ed752c0c46a04e11584aeec41
Signed-off-by: Jérémy Fanguède <j.fanguede@virtualopensystems.com>
|
|
Provide a specific version of the device tree (appended with -xen) to
run with Xen. Only the R-Car m3ulcb board is supported and tested so
far.
Add also the Xen block device backend support in the kernel, to be
able to run block device based DomU.
From U-Boot, Xen and Linux Dom0 can be run as follows (assuming
binaries are in sdcard first partition):
> setenv bootargs
> fatload mmc 0:1 0x48080000 xen-m3ulcb.uImage
> fatload mmc 0:1 0x48000000 r8a7796-m3ulcb-xen.dtb
> fatload mmc 0:1 0x7a000000 Image-m3ulcb.bin
> bootm 0x48080000 - 0x48000000
The Linux Dom0 bootargs are hardcoded in the device tree, the rootfs
is expected to be on /dev/mmcblk1p2
Bug-AGL: SPEC-2912
Change-Id: Ia86e0789650eaf79d13691cf4f53755c8cb8f06c
Signed-off-by: Jérémy Fanguède <j.fanguede@virtualopensystems.com>
|
|
Update SRCREV to pick up:
5c75038: eliminate unneeded dependencies on public headers
Bug-AGL: SPEC-3112
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
Change-Id: I78837377d13a24d3f16ba5c581f7d625e4d05b32
|
|
Default MTU of 310 causes PBAP/OBEX transactions to timeout before
completing the entire transfer from coming from paired iOS device.
Change this to 930 to avoid timeouts. This is a workaround till
a better solution is devised.
Bug-AGL: SPEC-3206
Change-Id: I48bdc6107ac9176397bc0137496946c42b1c95d7
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Newer API uses 512x512 blocks by default, but we need to use
256x256 to avoid tiny font as QtLocation expected the latter
sized tiles.
Bug-AGL: SPEC-3264
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Change-Id: I12e926fea5c527f7be2f33beb68d67b68a3b7873
|
|
Use -persist option for nbd.
Bug-AGL: SPEC-3221
Bug-AGL: SPEC-3232
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: Ia2eb94eeb3882b6546ebe9df04befdd42c99bd15
|
|
The drivers will also be needed for the html5 image.
Move them to a common layer.
Bug-AGL: SPEC-3170
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I9bcfc3b7569b3108442df4e64ec61da0054e4a44
|
|
On June 1st the Mapbox Studio Classic API will be disabled, and
thus the current QtLocation plugin needs to be updated to allow access
to the new API
Bug-AGL: SPEC-3264
Change-Id: I3799de4886b83d896d10b2ee97d15f604875b97e
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Upstream YP/zeus unconditionally deploys a network config fragment for
systemd-networkd.
This breaks our CI builds as it races with connman and netboot.
At least it does disturb the network enough for netboot to fail.
We have a nicer solution for that in-tree that we will upstream.
Until then, we remove the config file from our filesystems.
Bug-AGL: SPEC-3233
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I9e8343e77af378c058702b13fe000a344e6a1ef9
|
|
Includes:
* 862fb68b Fix globset compilation warning
* 4848ec20 Update .gitreview file
* 2f38d2ea Improves compatibility with AddressSanitizers
* 693249aa Fix bug in session and token removal
* 26b09b0d Fix a tiny issue in the protocol
* 9cab553d Fix bug in C++ wrapper
Bug-AGL: SPEC-3040
Bug-AGL: SPEC-3134
Bug-AGL: SPEC-3162
Bug-AGL: SPEC-3220
Change-Id: I5f96ac20a824df3f6cb73be2e41ef79cd3f2be04
Signed-off-by: Jose Bollo <jose.bollo@iot.bzh>
|
|
This includes the following changes (all of them related
to the libweston7 upgrade):
- dbba1adda7f meson.build: Increase version of the compositor
- b352cee6f81 meson.build: Build X11 backend optionally
- 93523a7f38b meson.build: Increase wayland-protocol version dependency
- c769a272324 main: Add support for the logging context when creating
the compositor instance
- a17bac48464 meson.build: Upgrade build and headers to libweston7
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I94e5077c48eca76092306892d6e25e345eeda45e
|
|
in meta-agl
Change-Id: Icb0be59cf5ef3963f563899ecf5c06d774e8a872
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Provide Xen support for Arm64 boards, tested with the R-Car M3 ulcb
board. Xen v4.13.0 stable version is compiled.
A new binary is deployed, named "xen-${MACHINE}.uImage" that can be loaded
and run by U-Boot.
v2: rework to split u-boot mkimage part a separate recipe so we can
keep the diff of the xen recipe at a minimum.
Bug-AGL: SPEC-2912
Change-Id: I68d2af74d31ee310686645c8a5ae11b0201448b2
Signed-off-by: Jérémy Fanguède <j.fanguede@virtualopensystems.com>
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Some CANBus adapters allow turning off/on of the termination
resistor. This patchset allows .network scripts to select
this value with Termination=
Bug-AGL: SPEC-3171
Change-Id: I33e71c44e32555ad5f5b0a7c8e6514df540a4266
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
On startup obexd attempts to read from %HOMEDIR%/.cache/obexd or
create the respective directory. Which is really not needed but causes
failure to start with SMACK failures, and so workaround this by
setting the parameter --root=/var/volatile/tmp
Bug-AGL: SPEC-3206
Change-Id: I8b39a91d8d095d94b903a6607f6960f38ed08b5d
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Update cmake-apps-module SRCREV to pick up:
9e3724b Create directories in separate commands
e708081 Change autobuild targets to avoid files remove
d75b9e1 build-options: add SANITIZERS build type
3dbbb81 autobuild: fix generating all widget target
6d4e784 variable: Fix trailing - in widget version
2175446 Update autobuild script to create new targets
354e327 docs(using-cmake.md): Remove & refresh expired link
57ec338 build_options: Avoid warning at configuration time
Update app-afb-test SRCREV to pick up:
205c820 Update autobuild script to create new targets
259aff7 Update .gitreview file
Update can-high-level-viwi SRCREV to pick up:
980e925 Update autobuild script to create new targets
2a4facc Fix broken link to local image
e3ecb64 Fixed book yml file (remove master reference)
e8927dd Changed doc to fit new format.
Bug-AGL: SPEC-2049
Change-Id: I29bcb72e0ceca02869c22114949d691110296820
Signed-off-by: Frederic Marec <frederic.marec@iot.bzh>
|
|
Add the new style CFLAGS assignments without removing the existing, old
style assignments which are needed for earlier kernels.
Bug-AGL: SPEC-3205
Change-Id: I64db9a8fb11e028eafbffcbee3e88694ce8e5d53
Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
|
|
Use different dtb and dtbo files for Raspberry Pi 4 when agl-sota
is enabled. This modification is required for successfully
building a kernel because in AGL machine raspberrypi4 is for
64-bit image and in class sota_raspberrypi layer meta-updater
the same machine name is targeting 32-bit image.
Bug-AGL: SPEC-3130
Change-Id: I5fd4bccfe605fea4e14499183279032a8bf0562e
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Now that next has been merged into master and agl-service-gps has
been updated for zeus, remove the next branch specific inc file
that was being pulled into poky-agl.conf.
Bug-AGL: SPEC-2932
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: If6570117e8f44afcace568c483cec71f9c3ea853
|
|
After the next branch is merged (YP zeus) we bump the distro config.
Change-Id: I6f9358c4b955ca2d9b1cf79651e2d80e15a939a0
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
* agl/next:
meta-agl-bsp: Add CONFIG_LSM workaround for 5.1+ kernels
meta-agl-profile-cluster-qt5: disable qtbase patches
zeus updates for dragonboard-410c
meta-security: activates dbus-cynagora
recipes-graphics/wayland/weston: Expose weston_output_damage()
meta-agl-profile-core: tweak udisks2 configuration for AGL
meta-agl-bsp/meta-arago: update weston bbappend
[RCAR] Update rcar driver weston 7 bsp 3.21.0
[RCAR] Update rcar driver weston 7 bsp 3.21.0
[RCAR] Split ADSP path for ulcb and ulcb-kf
Fix nss-localuser post install
meta-agl-bsp: meta-raspberrypi: handle zeus upgrade
meta-agl-profile-core: add patch for systemd-udevd SECLABEL crash
meta-security: disable dbus-cynara patches
meta-agl-bsp: handle ptest-runner upgrade
meta-agl-distro: Add inc file for next branch over-rides
meta-agl-distro: BBMASK problematic upstream meta-security bbappend
meta-agl-distro: prefer linux-yocto 4.19 LTS kernel
meta-agl-profile-graphical-qt5: enable qt5location services
meta-agl-profile-core: update most recipe
meta-agl-profile-core: update neardal recipe
Update base local.conf.sample
meta-agl-profile-graphical: don't always build agl-compositor
meta-agl-profile-graphical: update weston and weston-init
meta-agl-profile-graphical: update wayland-ivi-extension for weston 7.0.0
meta-agl-distro: add polkit to DISTRO_FEATURES
meta-agl-profile-core: update fontconfig bbappend
meta-agl-profile-core: switch to udisks2
meta-security: handle systemd upgrade
meta-agl-profile-graphical-qt5: handle qtwayland upgrade
meta-agl-profile-core: handle freetype upgrade
meta-agl-bsp meta-agl-profile-core: upgrade to opencv 4.x
meta-agl-profile-core: update rtl-sdr recipe for zeus
meta-security meta-app-framework: handle xmlsec1 upgrade
meta-agl-profile-graphical: upgrade to gstreamer 1.16
meta-agl-profile-core: remove libmicrohttpd backport
meta-agl-profile-core: remove backported curl and nghttp2 recipes
meta-agl-profile-core: remove libnfc recipe
meta-agl-profile-core: remove connman backport
meta-agl-profile-graphical: remove weston 5.0.0 patches
meta-agl-profile-core: remove old glibc patch
meta-agl-bsp/meta-intel: remove linux-firmware_git.bbappend
meta-agl-bsp: remove weston and wayland-protocols backports
meta-app-framework: remove libzip recipe
meta-security: remove keyutils recipe
Declare layer compatibility with zeus
Change-Id: Ie8ee1e37958279e7cf2d503c54ffacb46ba0c31c
|
|
The recent addition of multiple widget types in aglwgt.bbclass added
usage of pushd and popd, which are bash specific. This is undesirable,
since it causes failures for anyone trying to build on default installs
of Debian or Ubuntu. Since the B and S variables in OE recipes are
known to be absolute paths by definition, the pushd/popd can simply
be replaced with "cd".
Bug-AGL: SPEC-2049
Change-Id: I7ec9c558545be9aedd0b7e40539127b7f8c665ed
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
The returned appid is now either the part up to
the first @ or the entire string if no @ is present.
This evolution is needed to able the removal
of handling different versions.
Bug-AGL: SPEC-2538
Change-Id: I16cdb3e4a68b2bee067ab18bc2cd2ea21781bed1
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
Change package task and deploy task to allow creation
of test, debug and coverage widget.
Add debug and coverage directory to store new widgets
Bug-AGL: SPEC-2049
Change-Id: Ic3c1250d43de023e2e08398a098746ecd71592c5
Signed-off-by: Frederic Marec <frederic.marec@iot.bzh>
|
|
Add RestartSec=0.1 to canbus-can.network to allow recovery
when bus-off error conditions occur.
Bug-AGL: SPEC-3171
Change-Id: I4dc7ca9bd58666dc7a4e4a40f89af8bd47158193
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
The archiver feature will need extra parameters set to catch
all recipes. We exclude any proprietary code on purpose so
rewrite COPYLEFT_LICENSE_EXCLUDE in your conf/local.conf
if necessary.
Bug-AGL: SPEC-3186
.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: Iaa3387a2647f8bb6d49c7d4a0e1e72e8e3b08fd8
|
|
Includes the following changes:
- 357c5a034a89dc meson.build: Allow to install the private extension
- 405a475fa64594 Update .gitreview file
- ca5e2aec22cb7b meson.build: Allow to build/install locally
- ed4a9b0d9c5937 meson.build: Enable Wextra and transform warning messages into errors
- 191dc29c7d05d8 main: Avoid warning on un-initialized display
- b43a012824af01 shell: Add a black surface in the fullscreen layer
- 433edac095bb14 desktop: Remove the surface in all cases
- ab2e660c891df7 desktop: Reset the active surface
- f8457f6d62370f shell: Allow the client shell to unbind/rebind to agl-shell interface
- 08ea4a2fec76b4 layout: Do not delay mapping of desktop surface until commit time
- 3950b7e787c19b layout: Use the background's surface ivi_output when activating apps by default
- ffd00ab3a05351 ivi-compositor: Add systemd notify message
- 219a513fd959b8 shared: Add some regular helpers
- e5027ce09a4440 layout: Force a repaint of the entire output
- 0e47c84e348b65 layout: Print out when adding panels/background
- 2d7243208d3e45 src/: Add basic support for app switching
Change-Id: I366880b5fb5a09a23d9af26ea638ad5e1f14dafa
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
|
|
Add explicit clearing of CONFIG_LSM before running "make oldconfig"
in the do_configure_append added by linux-agl.inc. This ensures that
the derived value of CONFIG_LSM will reflect configuration changes
done by the merged AGL provided fragments, i.e. SMACK being enabled.
Without it, kernel recipes that are not based on linux-yocto.bbclass
or have their own fragment handling done via prepend will end up with
an incorrect value of CONFIG_LSM which effectively disables SMACK.
Examples include the linux-imx or linux-fslc kernels used by NXP.
Bug-AGL: SPEC-2932
Change-Id: Id99906e3de75128ebc54866d43d89d3a24bb1cf2
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|