summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-11-07Generalize create-combined-dtb to use VC4DTBO from board configJan-Simon Moeller1-6/+22
and also add the rpi4. Bug-AGL: SPEC-2465 Bug-AGL: SPEC-2656 . Change-Id: Ied2dce914ecc539c7634214b571508d371116235 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> (cherry picked from commit 06dccd49fe33d10320e5c9c7dbbd1a6d2a260533)
2019-11-06raspberrypi*/50_local.conf.inc: Update rpi 3/4Leon Anavi2-9/+0
Use the same versions for Linux kernel and Mesa on both Raspberry Pi 3B/B+ and 4. This allows to run firmware KMS that supports HDMI and the official 7" Raspberry Pi touch screen DSI display. Bug-AGL: SPEC-2465 Change-Id: I7ae5739bbb6b8d2efd3264d3d1eab9c28e6f2559 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-06agl_raspberrypi3.inc: Switch to firmware KMSLeon Anavi1-0/+11
Swith to firmware KMS with appropriate Linux kernel and Mesa version to support both HDMI and the official 7" Raspberry Pi touch screen display on Raspberry Pi 3B/B+ and 4. Device tree changes are not required for firmware KMS. Bug-AGL: SPEC-2465 Change-Id: I5f8f62c0151b7eb79ab1f96419d9c62469a1554e Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-06bcm2835-bootfiles.bbappend: Update firmwareLeon Anavi1-8/+8
Update the firmware to support Linux kernel 4.19.80 for Raspberry Pi 3 B/B+ and 4. This way both the HDMI and the official 7" Raspberry Pi touch screen display are supported. Bug-AGL: SPEC-2465 Change-Id: Idb028b8abca5a44da2783def8af2c28f04de66d2 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-06linux-raspberrypi_4.19.bb: Update to 4.19.80Leon Anavi1-2/+2
Update Linux kernel for Raspberry Pi to 4.19.80. This version allows to run firmware KMS to support output through HDMI and DSI for the official 7" Raspberry Pi touch screen display. Bug-AGL: SPEC-2465 Change-Id: Ie854f8609196f986a1f9067da1010fb2e510e7c4 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-06rpi-config: Set max_framebuffers to 2 to support dual displayChanghyeok Bae1-0/+5
Change-Id: Id9ca08ede2aedbc122a04d97ca4bb5bd8478b717 Signed-off-by: Changhyeok Bae <changhyeok.bae@daimler.com>
2019-10-31weston: Disable output type patchScott Murray1-1/+2
Comment out 0002-compositor-add-output-type-to-weston_output.patch in weston bbappend for now to prevent crashes on H3ULCB v3.0 plus Kingfisher systems like the AGL demo setups. Bug-AGL: SPEC-2827 Change-Id: I2a56d7b510d7001b555821dcf37f0487eea1806c Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-31agl-service-windowmanager: switch to floating SRCREVScott Murray1-1/+1
Change SRCREV in agl-service-windowmanager recipe to AGL_APP_REVISION so it will be automatically pick up latest branch changes based on the AGLRELEASETYPE mechanism. This matches the other service recipes. Bug-AGL: SPEC-2914 Change-Id: I5079f3582ac7c482e5caceb5baebe4178e17008d Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-31weston-ini-conf: update virtualoutput.cfgScott Murray1-1/+1
Update virtualoutput.cfg weston.ini fragment to use the 640x720 size expected by tbtnavi. Bug-AGL: SPEC-2913 Change-Id: I46abf9d6d78671772951e52e4f80cac20720edcf Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-30u-boot-2019.07: Fix for Raspberry Pi 4Leon Anavi10-5/+514
Following recent changes in the BSP the recipe for u-boot 2019.07 was failing to build for Raspberry Pi 4. This fix brings existing patches from master branch of meta-raspberrypi to AGL which is still based on Yocto project release Thud. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ic544d02032198dc05da24bc3246e8911d300c1ea Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-10-23meta-netboot: don't use 'ip' command to detect boot interfaceStephane Desneux1-3/+29
This patch changes the method to detect the current network interface used for netboot. Instead of using the 'ip' command, it parses the content of /sys/class/net/* to detect the first running ethernet interface. Two new messages are now visible on the console in initramfs phase: -------------------------------------------------- /sbin/init[1]: find_active_interface: first active interface is eth0 /sbin/init[1]: Adjusting Connman command line. Will be: 'connmand -r -n -I eth0' -------------------------------------------------- Background: When booting using netboot, it's necessary to update connman command line options to ignore the network interface used for NBD connection. For this, the initramfs script tries to detect the interface in use by running 'ip -o link show state'. 'ip' command comes with iproute2 package but for various reasons, some AGL images like m3ulcb-nogfx don't have iproute2 installed. In this case, the 'ip' command is implemented by busybox, which doesn't support the '-o' option. This leads to issues when running connman as the command line is not properly updated. Bug-AGL: SPEC-2921 Change-Id: I5691f04ab462a148219b741d235247a2bfbc2e24 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2019-10-22Add missing space in SRC_URI_append statementJan-Simon Möller1-1/+1
This fixes SPEC-2922. Bug-AGL: SPEC-2922 . Change-Id: I978c3d28e6d62885cd95ca6f2d2b32d34fa6933d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-10-16Post 8.0.2 bump of the distro configurationJan-Simon Moeller1-2/+2
Bug-AGL: SPEC-2859 . Change-Id: Idf2c6c6a216c9239aeacdb2c50f38d11d3b1055a Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-10-15libafb-helpers: bump to latest revisionStephane Desneux1-1/+1
The following commits are added: * 019054d Pkg config files: use CMAKE_INSTALL_LIBDIR var * 826731f Add function to add one json array to another one Bug-AGL: SPEC-2846,SPEC-2867 Change-Id: Ie0c1db8a8c788fa95480dd855137ee0305c439b3 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2019-10-14lightmediascanner.service: Fix for the first bootLeon Anavi1-0/+4
Fix lightmediascanner systemd service to avoiding a race condition with /var/volatile/tmp on the first boot by running it after run-agl-postinsts.service. Furhtermore, for extra safety, a restart on failure has been added. Bug-AGL: SPEC-2869 Change-Id: Ib0cadfaa3b4da2a15ac3cfc04cf6d8174e63eb63 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> (cherry picked from commit 15c979005a29404bfc11da6055f29ee77254b876)
2019-10-11af-main: Starting of HTML, API discovery, fixJosé Bollo1-1/+1
This upgrade includes the 2 fixes and one evolution below: * Add WAIT_FOR_HOST_SERVICE envvar to unit files for webapps * conf/system: fix shebang not absolute * Add discovery of API Bug-AGL: SPEC-2793 Bug-AGL: SPEC-2863 Bug-AGL: SPEC-2871 Change-Id: I48713487899e7e2555c228f1cc732f53bac94203 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2019-10-11Bump waltham-transmitter src revision.Veeresh Kadasani1-4/+4
* b880c4b - waltham-renderer:change pipeline configure name * 2309102 - change output section name for transmitter Change-Id: I60b044ef12d7c47f940e359db36146fb2a6b8d4a Signed-off-by: Veeresh Kadasani <external.vkadasani@jp.adit-jv.com>
2019-10-10agl-service-navigation: add RDEPENDSScott Murray1-0/+2
Add RDEPENDS definition to indicate libjson-c and libdbus-c++ runtime dependency. This fixes a startup problem if libdbus-c++ is not pulled into an image by something else, which will then cause the POI app to crash. Bug-AGL: SPEC-2707 Change-Id: I02b6c120c0fefae972874284c10b6606bab5f647 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-06Change distro config for HH 8.0.2halibut_8.0.2halibut/8.0.28.0.2Jan-Simon Möller1-3/+3
Bug-AGL: SPEC-2859 Change-Id: If9a5a32c42b8d1e6f39ff39f6b737608571b5f7f Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-10-06agl-devel.inc: Add modetestLeon Anavi1-0/+2
Add modetest if the agl-devel feature is enabled in images with graphical user interface (GUI), aka wayland. Modetest is part of libdrm and libdrm-tests. It is useful for verification of the DRM/KMS driver functionality. Bug-AGL: SPEC-2465 Change-Id: Iaee906a97b3ee38214b04f603322298fa7adb4c5 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> (cherry picked from commit d6f491229bc3d978503c100df704bdcfd250984b)
2019-10-06raspberrypi4: Fix WiFiLeon Anavi2-0/+49
Apply patch from branch master of meta-raspberrypi as a bbappend to recipe linux-firmware-rpidistro to fix WiFi on Raspberry Pi 4. This is a temporary solution while AGL master is still based on Thud. As soon as AGL moves to newer release of the Yocto Project and layer meta-raspberrypi this patch will become reduntant. The change of boardflags3 value from "0x48200100" to "0x44200100" has been done already in Raspbian (2019-06-20). For more details: https://github.com/RPi-Distro/firmware-nonfree/issues/3 Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ifaafbae6ff59a43f95926e64f1ce35aefadd3cfa (cherry picked from commit ece35b264ff4bac33a37a96cd166c2e0fe8bb433)
2019-10-06raspberrypi4: Fix BluetoothLeon Anavi1-0/+1
Include recipe pi-bluetooth in the Raspberry Pi 4 images to enable Bluetooth. This recipe provides a script that starts automatically and properly configures BT-HCI. The same script is used in Raspbian. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Id650cb2f61ee63196cbd826e4a9dd73488b298c3 (cherry picked from commit db28cd4134f4e07efc270ecb46b9f1d95c07429f)
2019-10-05bluez-alsa: update to latest masterGeorge Kiagiadakis1-2/+2
This adds, among others, the d-bus interface that is necessary for the pipewire gstreamer helper from meta-pipewire to work. The LICENSE file was changed to not include the contributors list, but otherwise the license is unchanged. Bug-AGL: SPEC-2792 Change-Id: I7d9e954691e617b3c8ba8165864b32f3831e28b7 Signed-off-by: George Kiagiadakis <george.kiagiadakis@collabora.com>
2019-10-01meta-agl-profile-core: update curl and nghttp2Scott Murray4-0/+144
Backport newer curl and nghttp2 recipes, and bbappend curl to enable nghttp2 support by default when building for target. In concert with a change to mask out the curl bbappend in meta-aac, this should provide the requirements for alexa-voiceagent-service and avoid significant rebuilds when the agl-voiceagent-alexa feature is enabled/disabled. The curl recipe backport is from commit 0b7320b in upstream oe-core master branch, the nghttp2 recipe backport is from commit 5a9b6d3 in meta-networking in meta-openembedded master branch. Bug-AGL: SPEC-2839 Change-Id: Id1ec872dfcb4ecc7a9ba68bdefb114ceeff066c3 Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 7f4b218599f3c6a0c7b77d1d2866e5b71d920179)
2019-09-20raspberrypi4: enable v3d and dependencies in mesaJan-Simon Möller1-0/+2
To enable the gfx acceleration, enable the necessary flags in mesa. Bug-AGL: SPEC-2656 Change-Id: I8bfb2f4034679f4703ddcb4bdb4c1363eee3d9d4 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-09-20raspberrypi*/50_local.conf.inc: Set Mesa versionLeon Anavi2-0/+7
Use Mesa 18.1 for Raspberry Pi 3 and Mesa 19.1 for Raspberry Pi 4. With the older version of Mesa Weston and the home screen doesn't launch properly on Raspberry Pi 4 therefore version 19.1 has been ported from master branch of layer openembedded-core to layer meta-agl-bsp/meta-raspberrypi. This solution is temporary until the next major update of AGL from Yocto Project release Thud to a newer release. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I7b3d87a42c6e65014705d98bfbd8ebdabb48eadd Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-09-20mesa: Upgrade Mesa for Raspberry Pi 4Leon Anavi16-0/+2080
Bring Mesa 19.1.6 to meta-agl-bsp/meta-raspberrypi because there are driver issues with Mesa 18.1 for Raspberry Pi 4. The recipes for this new version are coming from the master branch of layer openembedded-core. With the newer version of Mesa Weston works fine on Raspberry Pi 4 and the home screen appears as expected. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I0d4f6e6fdff3c6ac54a72d19abfc292efcea7a3f
2019-09-17Remove pulseaudio feature, not relevant any moreRonan Le Martret2-11/+0
Bug-AGL: SPEC-2817 Change-Id: I0323e97ed9aca036685e946752aa7bade8fc5057 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-09-16[RCAR] BSP update to v3.21.0Ronan Le Martret1-2/+2
Bug-AGL: SPEC-2785 Change-Id: I34e6798b31515f1a3528af80de8232fa7daa250a Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-09-16base-files: add /media to System::Shared SMACK labelMatt Ranostay1-0/+6
All media mountpoints should have the System::Shared label to avoid access denials on multimedia items. Bug-AGL: SPEC-2774 Change-Id: Ib9bb1b26a1950cacd5e1f384cbe19d4a4a6373d9 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-09-16meta-agl-bsp/meta-rcar-gen3: Update asound.state to pipewireHarunobu Kurokawa1-4/+4
pipewire is using default audio card volume. Current 50% of DVC Out is laudy and 0% of DVC In is small. Update 20% of DVC Out and 10% of DVC In for R-Car. Bug-AGL: SPEC-2808 Change-Id: Iac572255977d6a0111026a6426081efb0edbf0aa Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> (cherry picked from commit f7c7f376caefa9a788eee191220a4a424d0dad0c)
2019-09-13udisks: remove unneeded execute bit on automount.shMatt Ranostay1-0/+0
On do_install() the correct execute bits are set and shouldn't be in the repo version of automount.sh Bug-AGL: SPEC-2774 Change-Id: Ic66707f9e9367ed02c523f11cb6d6ba360e6fe9f Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit bad943d52c413e35879cc48a0df257f983190de8)
2019-09-12meta-agl-bsp: meta-rcar-gen3-adas: Rework KF radio initializationScott Murray3-0/+39
Add a systemd service unit and recipe to install it and a udev rules file so that the Kingfisher Si4689 radio will be initialized on boot if present, and the I2C device to access it will be accessible to applications with the "audio" permission. Note that an accompanying change to agl-service-radio is required to remove its now unworkable usage of the si_init script, which is replaced by this change. Bug-AGL: SPEC-2716 Change-Id: I81cf4b8c439598bdac1eb7910a0d693825141d7b Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit c369b00e617f408e2a408b0c04dc44fe7e06b7a1)
2019-09-11agl-service-navigation: Switch to AGL GerritScott Murray1-4/+4
Update agl-service-navigation recipe to switch to using AGL Gerrit for the source repository. Bug-AGL: SPEC-2787 Change-Id: I9a494adb8972b8cf20681ab37d2756459448e13d Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-09-10Post 8.0.1 release bump of distro configJan-Simon Moeller1-2/+2
Development is open for 8.0.2. Change-Id: Ib9723af707b5713e8f6bb6776f3450b518c4b8b9 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-09-09freetype: add pixmap to PACKAGECONFIGMatt Ranostay1-0/+3
To allow rendering of color emojis the pixmap/libpng support needs to be enabled. Bug-AGL: SPEC-2701 Change-Id: I7f0dc2cf54f0cf587d72a81fbf06c5750bbdeefb Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit dcda26bd13b88f51a197324d4894fe189f9dc504)
2019-09-09af-platform-setup: fix installation modeJosé Bollo1-1/+1
The file systemd-udevd.service.d/udev-shared.conf was installed with default rigths meaning rwxr-xr-x. Systemd complains about it: Configuration file /lib/systemd/system/systemd-udevd.service.d/udev-shared.conf is marked executable. Please remove executable permission bits. Proceeding anyway. This commit fix that issue. Bug-AGL: SPEC-2798 Change-Id: I90a2b0f538416b5e8e6f8e1aaf552530150c8103 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2019-09-04Add nogfx build for h3ulcbJan-Simon Moeller4-0/+30
Before we can add the h3 to CI we need a -nogfx build. v3: leave the BBMASK in the board specific file due to inc file stacking. Change-Id: Ic59784aa143e3346d2f999060214411497fc1b54 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-09-04Prepare Happy Halibut v8.0.1 patch releasehalibut_8.0.1halibut/8.0.18.0.1Jan-Simon Moeller1-1/+1
Change the distro configuration. Change-Id: I4ea995a2b8504b30117dc514f55cc18b84bd116b Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-09-04agl_raspberrypi3.inc: Set CMA for SOTALeon Anavi1-0/+2
Add CMA to the kernel arguments in uEnv.txt for U-Boot in images with enabled feature agl-sota for software-over-the-air (SOTA) updates for Raspberry Pi 3 B/B+. Bug-AGL: SPEC-2729 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Id6914de6a41ebfd3fc28ca2948a15d891c9a30b3 (cherry picked from commit 86f76e0578b4cbb1a3b286b6e959e317866f9c31)
2019-09-0350_local.conf.inc: Extend DISTRO_FEATURES for sotaLeon Anavi1-0/+2
Extend DISTRO_FEATURES with sota and usrmerge to successfully build AGL image with feature agl-sota. Bug-AGL: SPEC-2736, SPEC-2729 Change-Id: Ie056d233f1c528719361a8c958233a2ba58f7345 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> (cherry picked from commit 73b849c0d72f94eb1c0db582a9dc684123793960)
2019-09-03meta-agl-profile-cluster-qt5: Add qtcompositor-conf recipeScott Murray2-0/+41
Add qtcompositor-conf recipe to create the udev rule files required to set up the "display" group ownership of graphics devices when not using weston. The recipe is based on what is done in the weston-init bbappend in the meta-agl-profile-graphical layer. The package is also added to the agl-profile-cluster-qtcompositor packagegroup so that the qtcompositor cluster demo image will pick it up. Bug-AGL: SPEC-2775 Change-Id: I375e915b2074eb2abcec534a88fddfc6445730e1 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-09-03wayland bug backport: Fix fake "Address already in use" errorZhou Mingying2-0/+36
Backport a bug modification to the wayland used by AGL, because the bug may effect the applications start error The bug modification detail is as bellow: In the current workflow, socket file will be deleted if it already exists. However, if the socket file is a symbolic link or the file that it refers to not exist, we will got "Address already in use", because bind() thinks the socket file exists and won't create it. Now, use lstat() to determine whether the socket file exists. Bug-AGL: SPEC-2783 Signed-off-by: Zhou Mingying <zhoumy@cn.fujitsu.com> Change-Id: Iff2c7abefa56104eef49ae7102ee8a1de796b813
2019-09-03fix drm-introduce-drm_get_dmafd_from_view.patchVeeresh Kadasani1-14/+22
Fix crashing transmitter when testing with weston 6.0 because of unregistered API. Bug-AGL: SPEC-2696 Change-Id: Ib7cc01a4305da9a656b933f295e745dd56131ff4 Signed-off-by: Veeresh Kadasani <external.vkadasani@jp.adit-jv.com>
2019-09-03[RCAR] update to BSP v3.19.0Ronan Le Martret1-2/+2
Bug-AGL: SPEC-2681 Change-Id: Ie397c943762c20b0231ca7c0e44323bdf6101790 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-09-03Revert "setup_mm_packages.sh: Use GFX 3.19 binaries instead of 3.15"Ronan Le Martret1-51/+0
Bug-AGL: SPEC-2681 This reverts commit 9bc6c25f56f4997e55b60e969e9f942cc1859988. Change-Id: Ice72ff5f510ac848679c7d09ed4d0bde2d0940d7 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-08-26Fix qtbase compile error for dra7xx-evmZhou Mingying3-0/+76
Fix qtbase plugin eglfs kms gbm compile error, and conversion error from EGLNativeDisplayType to void. Bug-AGL: SPEC-2763 Signed-off-by: Zhou Mingying <zhoumy@cn.fujitsu.com> Change-Id: I73cc7d635a0e451fce7fe557f9433f397e107a7a (cherry picked from commit 647ed1cbae42411b187cab794e495f39cf2ec883)
2019-08-25Fix combined dtb names to match original filebuild.automotivelinux.org1-4/+4
Make the filenames conformant to the original files. Thanks to Khouloud Touil for finding this. Good catch! Change-Id: I1e4e95dc1148ddf1a9a3a09c22ceab75d1d88115 Bug-AGL: SPEC-2721 Signed-off-by: build.automotivelinux.org <jenkins@automotivelinux.org>
2019-08-23af-binder: Fix client disconnection closeJosé Bollo1-1/+1
This correctly close sockets. This integrates the following fixes * 99ad30b Fix client disconnection close Bug-AGL: SPEC-2759 Change-Id: Ia37ead39c31081bf99ed63b2e90ff0fe0226c999 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2019-08-23afs-supervisor: Start the service on needJosé Bollo1-1/+1
afs-supervisor.service failed to start the supervisor due to a non available activation socket. This change start the api socket and will activate the service on need. Bug-AGL: SPEC-2753 Change-Id: I2fd3c2d2d29bce8d70becaba0792918d6f6c0769 Signed-off-by: José Bollo <jose.bollo@iot.bzh>