Age | Commit message (Collapse) | Author | Files | Lines |
|
Currently, we get a file-rdeps QA warning because afm-install has a
/bin/bash shebang line but does not RDEPENDS on bash. We could also use
/bin/sh instead, but I'm not sure if we have some bashisms built-in to
the script. For now, add RDEPENDS to fix the warning.
Change-Id: I368da5e9e5c2d57d7bc2a1b674eb84c1147be5c1
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10221
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I1faf7ad14cc85cd12055f7e4c7e43ffe4ccf0671
Signed-off-by: Nathan Illerbrun <nathani@validmanufacturing.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10207
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Without open-vm-tools, VMWare guests are very slow. open-vm-tools was
recently added to meta-openembedded, so we should get it when Rocko is
released. Until then, this patch backports it.
Note that open-vm-tools has an optional dependency on fuse, so we need
to include the meta-filesystems layer too.
Bug-AGL: SPEC-739
Change-Id: Icc5bf7f10b8e21778ab7043dea8d340eb41a527c
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10211
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Adding a variable that control if wgt file should be automatically
installed. Now WGT are spread between autoinstall and manualinstall
directories.
By default autoinstall is chosen.
Change-Id: I51f4aa4426704714a77a53dab37adcaf5e1fd954
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10165
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* We need to add systemd udev device unit dependency to weston,
If the system is slow udev rules is up when weston want to start,
if the system is fast, udev rules may be down when weston want to start.
* TAG+="systemd" create a systemd device unit
* ENV{SYSTEMD_WANTS}="weston.service" add dependency (Like BindsTo).
Bug-AGL: SPEC-603
Change-Id: I45d6513ea64cd071a60b53afd98d782e9300cefa
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10209
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Connmand also has a NTP client that is conflicting with
the systemd timesytemd. So timesystemd should be removed
to avoid this.
Change-Id: I1d9e2a9597be7c1da1e40cde6b91099c2cf3601e
Bug-AGL: SPEC-737
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10179
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The udev rules files installed in /etc/udev/rules.d
should follow systemd naming convention.
This patch ensures it by renaming known wrong files
before to install it.
This patch is temporary.
This is a solution to the Bug-AGL SPEC-539.
It renames the file udev-smack-default.rules
as the file 55-smack-default.rules before installation in do_install.
This comes from https://github.com/01org/meta-intel-iot-security.git
(meta-security-smack/recipes-core/systemd/)
It should be removed when the security layer will be refited to meta-security
See git clone http://git.yoctoproject.org/cgit/cgit.cgi/meta-security
It also renames the file touchscreen.rules as the file 55-touchscreen.rules
This comes with the recipe systemd_230 of poky (meta/recipes-core/systemd)
It should be removed when poky changes.
Bug-AGL: SPEC-539
Change-Id: I95e36fc22711babb185ccf53deee8b838874c401
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10167
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The fields type and loa were declared as const.
This worked well for C compilers that are allowing
to initialize constant fixed structures.
But when compiling with C++, it is no more easy
to create initialized structure explicitely.
In C++, the solution is to use C++14 constexpr functions.
But for using these function, const must be removed.
Bug-AGL: SPEC-741
Change-Id: If5aca00e79dc074dcd1f6bac81a57d85b8537cea
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10197
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Changhyeok Bae <changhyeok.bae@gmail.com>
|
|
qemu images for 64-bit x86 doesn't generate a u-boot image
however netboot does by default. Fix this issue by checking for
vmdk in image types.
Change-Id: I061d61c87c6be9c16a04926d56b0825a3eedde04
Bug-AGL: SPEC-513
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10177
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The -nogfx build uses the core-image-minimal target, not the
agl-demo-platform build target, so ensure the NBD rootfs filename is
the right one.
Change-Id: I81fa24a55cfa6acfbeda987f31d6dca5fea9dd52
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10119
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 287700311bb9879f19d5b7b9977979c5692895c9)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10151
|
|
Add the kernel configuration fragment for the ath9k_htc driver used by
the D-Link USB Wifi adapter recommended for demos to rcar-gen3.
Change-Id: I7739193adaeeba985625ea9058ee5c991b77b63a
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10155
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Make aglwgt class use autobuild script if 'make package' did not succeed to keep
retrocompatibility.
Added recipe to build and install low-level-can-service by Bitbake
Bug-AGL: SPEC-428
Change-Id: I21e3b2e7c6f9d64b71f01745bff10f9233bcf6a9
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10159
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-704
Use u-boot-imx instead of u-boot-fslc and now gpio is correctly initialized and usb devices are correctly recognized.
(Sent e-mail and meta-freescale/fsl community has been notified about the issue.)
Also generate scard image that we are familiar with.
Confirmed local build successfully boot and show usb devices on lsusb.
Update:
Sorry fixed typo, also changed .sdcard to .sdcard.gz
Update2:
.sdcard.gz -> .sdcard.xz
Change-Id: Ie2d98fac62d7f1eef803f10784b35a2cb60f535f
Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10157
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Fix is wip but takes a little.
Change-Id: I5b561a687dda47aaa8dfbf19d9b629abb3956549
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10127
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
(cherry picked from commit 8f022c868bff1a4f2bfcdc04ea6eb3af20046852)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10149
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
This includes:
- improvement of debugging (indication files)
- not listing terminated processes
- allow widget to not define icon (service)
- improvement of afm-util output
Bug-AGL: SPEC-702
Bug-AGL: SPEC-728
Bug-AGL: SPEC-729
Change-Id: I2b8b4d803bc4d1f056031d8f7a32e80bfed86314
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10145
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* reload daemon at the first boot
Bug-AGL: SPEC-731
Change-Id: Ia23f4eca116add1abc061eaa1708fe3185e26080
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10093
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The previous settings assumed that services were
started by socket activation. This is not always
the case.
Bug-AGL: SPEC-734
Change-Id: I5dda5d48a434ebc83f31eb5074504b3fb86e08cc
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10103
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* do not remove post install script if failed
Bug-AGL: SPEC-700
Change-Id: I1b45670ecbe3915a69cfa659031ac877eb794571
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10025
Reviewed-by: José Bollo <jobol@nonadev.net>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 0c28379c6d8ab33f3c902b6617503ca634b8c90e)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10091
|
|
To resolve issue of SPEC-699, afm-install began to use
PIPESTATUS[] to catch error from dbus-send.
But the /bin/sh is still specified even though it is an unique
function of Bash.
Note: Because current AGL has Bash and /bin/sh is symbolic
link to /bin/bash, it works with no error before this fix applied.
Bug-AGL: SPEC-699
Change-Id: I730de85d593f6371210cf1424e7bc39ca9365f2f
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10055
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This change includes
- bug fixes
- Fix bad error reporting (and of the not funny "Inappropriate ioctl for device")
- Fix libmicrohttp version dependency
- Fix start actions order
- binding v2 improvements (SPEC-717)
- reintroduce the field <info> when describing fields
- enforce V2 binding writers to use AFB_ prefixed logging macros
- make error status uniform even for call & subcall
- debugging features (SPEC-729)
- allow to export the http port in afm-unit.conf
- enable setting of breakpoints/waitpoints when compiled
with AGL_DEVEL
Bug-AGL: SPEC-717
Bug-AGL: SPEC-729
Change-Id: I2615fe7f6fa8ff3ff28974236ca01a65782cab59
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10045
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-726
Change-Id: Id523051a2b94c2ac8997262e796b5558771b67b9
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10043
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
It is time for the framework to include
development specific features intended
to be used when developing applications.
This commit prepares such use. See:
AGL-Bug: SPEC-594
It also changes the version PV to point
the correct AGL distribution/branch and
git commit.
Change-Id: Ib399ebe1067892d837bc31363c2c4cf892da6e5e
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10041
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
v2:
When gst-record is included DISTRO_FEATURES, "--gst-record" is set.
Bug-AGL: SPEC-559
Change-Id: Ia172135f355a98bb10234743cdd1a7b1319723e7
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9911
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
local.conf is evaluated first before the distro configuration. This caused issues while parsing the
IMAGE_FSTYPES. The same set of IMAGE_FSTYPES did not throw the same switches deep in the other recipes.
We define
AGL_EXTRA_IMAGE_FSTYPES and AGL_EXTRA_INITRAMFS_FSTYPES for use in conf/local.conf or the device templates
which are added early on-top of the defaults:
AGL_DEFAULT_IMAGE_FSTYPES ?= "tar.xz ext4.xz" (tar.xz for direct use, ext4.xz for direct use and CI)
AGL_DEFAULT_INITRAMFS_FSTYPES ?= "ext4.gz" (format for initramfs/initrd with smack labels)
Both sets can be overridden in the device configuration / template.
Device templates have been adapted accordingly.
Bug-AGL: SPEC-492
Change-Id: I962ee8cc461b307b494d13ce3a3ebca154bebc86
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10049
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Dominig ar Foll <dominig.arfoll@fridu.net>
|
|
Bug-AGL: SPEC-704
This is part of the fixe to make i.MX6 buildable again.
Following fixes are included in this change:
- adding build target imx6qsabreauto
- fixing qt5.8 build error
- refine bblayers.conf layer order (for dynamic-layers)
- meta-fsl-arm -> meta-freescale layer name change
- weston.ini lines (use fbdev-backend.so)
- /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules)
- kernel configuraion to include smack, etc.
Follwings are stil not addressed yet:
- bblayer.conf layer order still have issue re. dynamic-layers
- built and booted on imx6qsabreauto only yet.
following existing community boards may need update
(i have imx6qsabrelite, but no notrogen6x)
Note, this fix is prepared independently of nxp or fsl-community,
who should follow-up if there are mistakes to be fixed, or updates
that they find needed.
Update:
Refined on review comment regarding tune settings and
kernel configurations. The board successfully boots and shows
AGL homescreen.
But I found I still have problem with USB.
lsusb says 'unable to initialize libusb: -99' error which I am
still faling to find the cause.
Update2:
usb issue may be related to dtb configuration in linux-fslc-imx
better to be tracked separately
Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574
Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9971
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I9c5a95bd33516e8451113dbabf6b6739dc637b7d
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9819
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit ca8367a37ff019862aae48fc5a3d05ad56f084ec)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9877
|
|
A commit was missing in the dab backport
of commit 50e1176. This aptch includes it.
Change-Id: I7f59fb45cf30399e2890d3827ce7907ed548ac50
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9963
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
https://git.linaro.org/landing-teams/working/qualcomm/kernel.git/log/?h=release/qcomlt-4.9
contains now the necessary patches. We no longer need ours.
Bug-AGL: SPEC-705 SPEC-707
Change-Id: Id22e1e2f7ccc173a8ecfce523e8781f852fa3564
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9959
|
|
Bug-AGL: SPEC-559
some /dev module should be grant to access as display user.
When weston use gst-record, it accesses some /dev driver
as display user.
Change-Id: Ifc3ab94282d2857d48cfd5673c3eab944badddf3
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9893
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: Iea65e4986f3ab7ea41bcbf98bc63be8f4a4e2eba
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9949
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
This changeset fixes the case of the rpi-sdimg which was broken
by the IMAGE_FSTYPE setting introduced in poky-agl.conf (distro-wide).
A new variable AGL_EXTRA_IMAGE_FSTYPES is available now and only used
in AGL (target) images.
Reasoning for this solution:
- any modifications to IMAGE_FSTYPES will also affect things like the initramfs or initrd images.
- we minimized the disk-space requirements by reusing the ext4.xz for the rpi-sdimg
Bug-AGL: SPEC-492
Change-Id: I07fd51dbcf334653cd6033b7ccb663c4d4ed8578
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9927
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
The latest meta-updater provides an include file to enable OTA
updates--use that to bring in the relevant configuration.
rvi-sota-client is not pulled in by default, so delete the
IMAGE_INSTALL_remove line.
Change-Id: I148dc1b0156f6ea12a456bd093a32945215852e7
Signed-off-by: Phil Wise <phil@advancedtelematic.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9905
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This changeset fixes CVE-2017-1000366 by using the latest glibc
revision from the 2.24 glibc git as of today which includes the needed fix.
One patch file had to be adapted and overlayed with our custom version
(patching just conflicts on ChangeLog, no source file affected).
Bug-AGL: SPEC-705 SPEC-707
Change-Id: I1fbb6bc5862ada6b8b5479796c6a488a11c53ed4
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9933
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Backport of upstream fixes from 4.9 kernel branch to linux-yocto:
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.9.34&id=cfc0eb403816c5c4f9667d959de5e22789b5421e
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.9.34&id=5d10ad6297260e9b85e7645ee544a6115bb229e4
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.9.34&id=ce7fe8595902c3f03ef528c2dc1928b3f4b67fcf
Change-Id: I5bedd3af344b32b410bb7d59448710799143107d
Bug-AGL: SPEC-705 SPEC-707
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9855
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
|
|
Backport of patches from upstream for 4.9
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=cfc0eb403816c5c4f9667d959de5e22789b5421e
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=5d10ad6297260e9b85e7645ee544a6115bb229e4
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=ce7fe8595902c3f03ef528c2dc1928b3f4b67fcf
Bug-AGL: SPEC-705 SPEC-707
Change-Id: I6ff3543fbe09e29511acc1f7a27c5ac961ada28d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9885
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
|
|
upstream kernel v4.9
Backport of patches from upstream for 4.9
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=cfc0eb403816c5c4f9667d959de5e22789b5421e
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=5d10ad6297260e9b85e7645ee544a6115bb229e4
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=ce7fe8595902c3f03ef528c2dc1928b3f4b67fcf
Bug-AGL: SPEC-705 SPEC-707
Change-Id: Idf5ac1f67829b30e9d5b0359ae7d7ef3aaac1dac
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9903
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
|
|
Backport of patches from upstream for 4.4
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=4b359430674caa2c98d0049a6941f157d2a33741
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=f41512c6acb71c63cf4e3bd50934365ae2a23891
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=1f2284fac2180d7a9442c796d9755e3ce7ab0bd9
Backport of patches from upstream for 4.9
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=cfc0eb403816c5c4f9667d959de5e22789b5421e
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=5d10ad6297260e9b85e7645ee544a6115bb229e4
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=ce7fe8595902c3f03ef528c2dc1928b3f4b67fcf
Bug-AGL: SPEC-705 SPEC-707
Change-Id: I786dd198e288ab89de59866a9044716ee33d3d16
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9859
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Also adds minor improvement in logging for the binder
Change-Id: Iaf97c6b3fef7f827503ca7eb154916e770dd4ba1
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9925
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Make the reload of services in the daemon
and add an option to avoid the reload within
system
Change-Id: I8441716e91a13726f24e2f7ab82562a9dc0d953a
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9923
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This changeset enforces the same output images across all boards
to be ext4.xz and tar.xz . No exceptions.
Reasons: disk space, unification of instructions, download size
Bug-AGL: SPEC-492
Change-Id: I41c92ba1d92a6e5854cea470eea6e0b559945d5d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9813
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
(cherry picked from commit be141be78efd87a910f03b83f7f89e5b2690d17f)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9869
|
|
v2 (jsmoeller): Add append files for boards that need special handling.
Change-Id: I172b71be6e825aa6399f22899e9b6eaacc86e72b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9825
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
The script afm-install wasn't able to report errors.
This patch suggested by Tadao Tanikawa ensure that
the status returned by dbus-send is reported to the
caller and solves the issue.
Bug-AGL: SPEC-699
Change-Id: I4a737986ced800d4f29f1c3fdbc65aa0e957962d
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9833
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This changeset modifies the distro configuration to reflect DD rc2 .
Change-Id: If02e69819e4007aaf7fbc220c662b64757c24b6c
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9809
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Change-Id: I8cf41e7ae82339d867efc40c6ea167220d02c02a
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
When installing a widget, the sockets.target
has to be restarted. This commit does it.
AGL-Bug: SPEC-670
Change-Id: I7200749716c57778d165971a5abea27493ce0628
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9793
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The method to create shared services using websockets
was buggy. This patch correct it. It creates the directories
'sockets.target.wants' were the socket activations units
will be linked. It also makes correct reload and improves
the used paths.
Also fixes a masty infinite loop (spec-663).
AGL-Bug: SPEC-670
AGL-Bug: SPEC-663
Change-Id: I39d93f669498354a1c2f96bd735c0318a2f0e93a
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9787
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Set KERNEL_IMAGETYPE to Image to ensure correct
generation of kernel7.img and successful booting
of AGL on Raspberry Pi 3 and 2 with output from
the serial console.
v2 (jsmoeller): Also adapt
templates/machine/raspberrypi3/test/hwtest.short.environment
v3 (jsmoeller): disable CI hwtests as rpi firmware is used
Bug-AGL: SPEC-649
Bug-AGL: SPEC-650
Change-Id: If4335ffed7047fd2fbbf4bbd2dff54322cd0bf07
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9727
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
|
|
More room is needed when installing debug packages or
big components like Chromium.
Also, IMAGE_ROOTFS_EXTRA_SPACE was overridden by another unidentified
configuration file or recipe: the setting is now forced. Consequently,
the extra space must be reduced specifically for initrd.
Change-Id: Id9b7659197c0840c04bce048a7bb1d96c77f3cc9
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9779
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The meta-raspberrypi layer already supports raspberrypi3-64, where
it will build a 64-bit kernel.
Add templates so that "aglsetup.sh -m raspberrypi3-64" works.
Note that 64-bit kernel build is only supported in the v4.9 branch of
the rpi kernel, and that the kernel image type is "Image" instead of Image.
Change-Id: Iee728191dc38521be607787d5736d21372f1dff5
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9767
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Remove class sdcard_image-rpi-gdp. Historically it
was added during the initial porting of AGL to
Raspberry Pi and it had been taken from GENIVI
Development Platform. It is not needed anymore.
Bug-AGL: SPEC-409
Change-Id: I3f78b5fd92b08962c4a1fe07753627ae81da23ec
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9765
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|