summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-12-29libqtappfw: update SRCREVScott Murray1-1/+1
Update SRCREV to pick up: b9696a3 radio: Make sure min/max frequency are initialized f525733 voice: add vendor name to voiceagent model Bug-AGL: SPEC-2981, SPEC-3041 Change-Id: Ia9acc286607eaceeea3b2ff21cc313216fb0a1f7 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-29dev-mapping: Add RPROVIDES mechanismScott Murray3-5/+8
Add RPROVIDES and PREFFERED_RPROVIDER definitions to define a new virtual/low-can-dev-mapping runtime package dependency that will enable providing a different device mapping configuration for demo setups. Bug-AGL: SPEC-3076 Change-Id: I73d253a0a1285dd4576bb3b5bf04568c3d05e60c Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-29libqtappfw: Update SRCREVScott Murray1-1/+1
Update SRCREV to pick up: aa6b53c Backport voice message support Bug-AGL: SPEC-2981, SPEC-2880, SPEC-3060 Change-Id: I14934f5f15882247810dc29c619f837155a96595 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-20Add cloc to hosttools and use patched sourcesJan-Simon Möller1-1/+5
to use the cloc bbclass, cloc needs to be installed on the host. Thus add it to HOSTTOOLS and also apply all patches. Change-Id: Ifd9a355d2d0dc75f55b683e9d7f398a8f46bae16 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-12-19Post-8.0.4 change of distro configurationJan-Simon Moeller1-2/+2
Adapt the distro-configuration after 8.0.4 is done. Merge window is open for 8.0.5 now. . Change-Id: Ifafdeb6ab888336c18abed7e38c5c3ad6d8dfdeb Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-12-19Prepare Halibut 8.0.4 releasehalibut_8.0.4halibut/8.0.48.0.4Jan-Simon Möller1-3/+3
Change the distro configuration for 8.0.4 Change-Id: Ifdc9a8df8c3cd1a58ed361a8916047c641d208cf Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-12-18meta-agl-bsp/meta-rcar-gen3: Apply E3 audio configurationHarunobu Kurokawa1-0/+8
v2: add PACKAGE_ARCH = "${MACHINE_ARCH}" Bug-AGL: SPEC-2808 Change-Id: Id1587761c9be10a55ea18a938b74b39c512b63e2 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> (cherry picked from commit e8118390379a22f119d6ec5784dea541ca57d0df)
2019-12-18libqtappfw: update SRCREVScott Murray1-1/+1
Bump libqtappfw SRCREV to pick up steering wheel event changes: 100316a Add steering wheel events 5f45769 Add units and timestamp to signal-composer signal 2e95f1f Add initial signal-composer support 8155891 Fix branch in .gitreview Bug-AGL: SPEC-3023, SPEC-2950 Change-Id: I656328f63d2f99c2b89db8bcd6fa5a91ceadbcfb Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-17fix weston crash on h3+KF after first bootupVeeresh Kadasani2-205/+0
Bug-AGL: SPEC-2827 remove 0002-compositor-add-output-type-to-weston_output.patch this patch was ported from weston 2.0 transmitter fix which use to crash because of invalid member access. with weston 6.0 transmitter works fine without this patch so remove it to fix crash after first boot on h3+KF Change-Id: I607bec3bdfb5146af68d36d717d3305f5fd58998 Signed-off-by: Veeresh Kadasani <external.vkadasani@jp.adit-jv.com>
2019-12-17ivi-shell: Fix crash due no transmitter screenVeeresh Kadasani2-0/+265
Bug-AGL: SPEC-3056 Registered the events for the output_created, destroyed, resized events.So that the ivi_scrn can be destroyed, created dynamically during destroyed and created events. And the view properties are dynamically changed during resized/moved events. Change-Id: I136b66c9747412af1fa868cef8a061ef2ea624f7 Signed-off-by: Veeresh Kadasani <external.vkadasani@jp.adit-jv.com>
2019-12-16af-main: Ensure home and workdir to platform's appJose Bollo1-1/+1
The widget requesting the permission to run at platform scope: urn:AGL:permission::partner:scope-platform should be able to record data and state. This change provides a default place to achieve it. Bug-AGL: SPEC-2998 Change-Id: Idf5fb071c3a72820715e96417b7a0d7e6a291446 Signed-off-by: Jose Bollo <jose.bollo@iot.bzh>
2019-12-14Change the URL to gerritJan-Simon Moeller1-1/+1
to stay inline with all other recipes, change this to use gerrit. . Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: If68c42c2dcda0b8c19fc6ed9d634789ae06448c7 (cherry picked from commit 86f6f0b033c52f1270199b8f5c884b2048b41e4f)
2019-12-12agl-service-signal-composer: switch to AGL_APP_REVISIONScott Murray1-3/+2
Switch agl-service-signal-composer's SRCREV to AGL_APP_REVISION so it will automatically pick up changes. This matches the configuration of all the other service bindings. Also change the SRC_URI from gitsm to just git, since submodules are no longer used. Bug-AGL: SPEC-3024 Change-Id: Ida819d937f9090134c885cd5e816342dad7b9c0b Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-12meta-agl-profile-graphical-qt5: add libqtappfwScott Murray1-0/+20
Add libqtappfw recipe to meta-agl-profile-graphical-qt5 to move it from meta-agl-demo, making it available for use in other images builds like the cluster demo. Bug-AGL: SPEC-3045 Change-Id: I258b04545f8e7bb96d5d723c7956d6365e7bbd83 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-12-11json-c: add --enable-threading to EXTRA_OECONFMatt Ranostay1-0/+1
Enable partial threading support to enable compiler atomic operations which in turn avoids refcount corruption issue that was causing aborts with moderate prolonged traffic. Bug-AGL: SPEC-3044 Change-Id: I0b9ab8c27f2c436910dbabf03be5bedaf1a28136 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-12-03Add development headers for pipewire and wireplumber to SDKJan-Simon Möller1-1/+1
This is required to build the agl-service-audiomixer with the SDK. Change-Id: Ie717633f92a85d14d311cf282f9d920bc95ca9f6 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> (cherry picked from commit 330e71fb69f06777439c70ac445eed5b8d4dec3a)
2019-12-03low-level-can-generator: update to latest revisionScott Murray1-1/+1
Update SRCREV in low-level-can-generator recipe so that the toolchain will have a version that matches the low-can binding, changes: d9c40fd dd management of version and new decoder signature. 7869e2e Change enum type to flag and add iso tp protocol 93debbc Add generator for boolean fields afa9e97 Add some modifications (space, new line, coma, float). f61a6cb Add some options for J1939 support 0bb5744 Fix the default decoder using "states" da429cc Add gitreview Bug-AGL: SPEC-2976 Change-Id: I1dc3ece955548ced95ae24b9a382ce0ed3ad3b68 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2019-12-03can-low-level: bump version to get latest changesRomain Forlot1-1/+1
Change-Id: I4f813b634421c781dbe34190417febc69336c649 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2019-12-01afb-test: add missing jq package to RDEPENDSMatt Ranostay1-1/+1
Bug-AGL: SPEC-3005 Change-Id: I4d28c2bb7b97ddf8aedbfedf1519362c27327b10 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-11-27libhomescreen: remove org.agl.statusbar.conf dbus policyMatt Ranostay2-24/+1
StatusBar dbus interface is deprecated and no longer actively used so remove dbus session policy. Bug-AGL: SPEC-2964 Change-Id: I7fc6dce12761ed81c59e4d96a0db95f748570e84 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-11-27Bump afb-test & libappcontrollerFrederic Marec2-2/+2
Bump afb-test & libappcontroller to fix missing event group during test Bug-AGL: SPEC-2795 Change-Id: Iaa87ac5512d5b54bf56922883c54cf38eaa6ce79 Signed-off-by: Frederic Marec <frederic.marec@iot.bzh> (cherry picked from commit b25f4ec97c4ef95dbbb85423fffe9be753b52f51)
2019-11-26ebisu: Update setup.sh to adopt multiple zip fileHarunobu Kurokawa1-1/+4
Bug-AGL: SPEC-2564 Change-Id: I4462128c52b70ab6e5abcba5d89bf5b02cc79e17 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-11-26systemd: Install canbus network script in nonarch_base_libdirMax Tomago1-1/+1
This is the directory where systemd keeps network scripts (e.g /lib rather than /lib64). Installing them in base_libdir breaks the build for multilib targets. Bug-AGL: SPEC-2966 Change-Id: If1f780a8cfed29f22f46b9ff1d08f36dee3296ee Signed-off-by: Max Tomago <max.tomago@codethink.co.uk> (cherry picked from commit 2ed82aa378099d18db268c146d9a53756c5f2890)
2019-11-26Bump waltham-transmitter src revision.Veeresh Kadasani1-1/+1
* 8409a6d - output:fix seg fault in transmitter when weston terminates * e448fc5 - output:fix repaint func not to skip first buffer * 5287483 - output:don't push surface to remote if receiver not ready Change-Id: Iaf2004bc95bc59e2daf5e4954ea14139e9a3a6ac Signed-off-by: Veeresh Kadasani <external.vkadasani@jp.adit-jv.com>
2019-11-26Post 8.0.3 change to distro config fileJan-Simon Möller1-2/+2
Bump the AGL distro config after 8.0.3 release. . Change-Id: Ie7b7df39340246c45e8bc8d9756de9fc5f8d1634 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-11-22[RCAR] Update graphics driverRonan Le Martret1-1/+1
Update graphics kernel side driver to 20191021. Bug-AGL: SPEC-2784 Change-Id: Ibce4e7ee5fe00d9c37e49b826bd62e39129f91a1 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-11-17Cut HH 8.0.3 releasehalibut_8.0.3halibut/8.0.38.0.3Jan-Simon Moeller1-3/+3
bump the distro config file. . Change-Id: I002fcf9fa25d52e71f0bbb21a3e90984390eda20 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-11-17agl-service-hvac: rework configuration file packagingScott Murray3-10/+30
Move agl-service-hvac hvac.json configuration file install into its own recipe so that just it will be machine-specific, and replace m3ulcb-specific agl-service-hvac bbappend with a more generic do_install_append_ulcb in the new agl-service-hvac-conf recipe. Bug-AGL: SPEC-2949 Change-Id: Iabdfa2c204017a30bf82bed3eb6debbd3eb0be9c Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-11-14af-binder: Fix callsync hangingJosé Bollo1-1/+1
This bump includes the following changes: * 6cbd15fc sig-monitor: Fix exit in signal handler * aeb015be jobs: Fix callsync hanging Bug-AGL: SPEC-2937, SPEC-2907 Change-Id: Ie8187778b0b76f484a7d589b20b0190a45d441a7 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2019-11-07Generalize create-combined-dtb to use VC4DTBO from board configJan-Simon Moeller1-6/+22
and also add the rpi4. Bug-AGL: SPEC-2465 Bug-AGL: SPEC-2656 . Change-Id: Ied2dce914ecc539c7634214b571508d371116235 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> (cherry picked from commit 06dccd49fe33d10320e5c9c7dbbd1a6d2a260533)
2019-11-06raspberrypi*/50_local.conf.inc: Update rpi 3/4Leon Anavi2-9/+0
Use the same versions for Linux kernel and Mesa on both Raspberry Pi 3B/B+ and 4. This allows to run firmware KMS that supports HDMI and the official 7" Raspberry Pi touch screen DSI display. Bug-AGL: SPEC-2465 Change-Id: I7ae5739bbb6b8d2efd3264d3d1eab9c28e6f2559 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-06agl_raspberrypi3.inc: Switch to firmware KMSLeon Anavi1-0/+11
Swith to firmware KMS with appropriate Linux kernel and Mesa version to support both HDMI and the official 7" Raspberry Pi touch screen display on Raspberry Pi 3B/B+ and 4. Device tree changes are not required for firmware KMS. Bug-AGL: SPEC-2465 Change-Id: I5f8f62c0151b7eb79ab1f96419d9c62469a1554e Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-06bcm2835-bootfiles.bbappend: Update firmwareLeon Anavi1-8/+8
Update the firmware to support Linux kernel 4.19.80 for Raspberry Pi 3 B/B+ and 4. This way both the HDMI and the official 7" Raspberry Pi touch screen display are supported. Bug-AGL: SPEC-2465 Change-Id: Idb028b8abca5a44da2783def8af2c28f04de66d2 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-06linux-raspberrypi_4.19.bb: Update to 4.19.80Leon Anavi1-2/+2
Update Linux kernel for Raspberry Pi to 4.19.80. This version allows to run firmware KMS to support output through HDMI and DSI for the official 7" Raspberry Pi touch screen display. Bug-AGL: SPEC-2465 Change-Id: Ie854f8609196f986a1f9067da1010fb2e510e7c4 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-06rpi-config: Set max_framebuffers to 2 to support dual displayChanghyeok Bae1-0/+5
Change-Id: Id9ca08ede2aedbc122a04d97ca4bb5bd8478b717 Signed-off-by: Changhyeok Bae <changhyeok.bae@daimler.com>
2019-10-31weston: Disable output type patchScott Murray1-1/+2
Comment out 0002-compositor-add-output-type-to-weston_output.patch in weston bbappend for now to prevent crashes on H3ULCB v3.0 plus Kingfisher systems like the AGL demo setups. Bug-AGL: SPEC-2827 Change-Id: I2a56d7b510d7001b555821dcf37f0487eea1806c Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-31agl-service-windowmanager: switch to floating SRCREVScott Murray1-1/+1
Change SRCREV in agl-service-windowmanager recipe to AGL_APP_REVISION so it will be automatically pick up latest branch changes based on the AGLRELEASETYPE mechanism. This matches the other service recipes. Bug-AGL: SPEC-2914 Change-Id: I5079f3582ac7c482e5caceb5baebe4178e17008d Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-31weston-ini-conf: update virtualoutput.cfgScott Murray1-1/+1
Update virtualoutput.cfg weston.ini fragment to use the 640x720 size expected by tbtnavi. Bug-AGL: SPEC-2913 Change-Id: I46abf9d6d78671772951e52e4f80cac20720edcf Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-30u-boot-2019.07: Fix for Raspberry Pi 4Leon Anavi10-5/+514
Following recent changes in the BSP the recipe for u-boot 2019.07 was failing to build for Raspberry Pi 4. This fix brings existing patches from master branch of meta-raspberrypi to AGL which is still based on Yocto project release Thud. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ic544d02032198dc05da24bc3246e8911d300c1ea Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-10-23meta-netboot: don't use 'ip' command to detect boot interfaceStephane Desneux1-3/+29
This patch changes the method to detect the current network interface used for netboot. Instead of using the 'ip' command, it parses the content of /sys/class/net/* to detect the first running ethernet interface. Two new messages are now visible on the console in initramfs phase: -------------------------------------------------- /sbin/init[1]: find_active_interface: first active interface is eth0 /sbin/init[1]: Adjusting Connman command line. Will be: 'connmand -r -n -I eth0' -------------------------------------------------- Background: When booting using netboot, it's necessary to update connman command line options to ignore the network interface used for NBD connection. For this, the initramfs script tries to detect the interface in use by running 'ip -o link show state'. 'ip' command comes with iproute2 package but for various reasons, some AGL images like m3ulcb-nogfx don't have iproute2 installed. In this case, the 'ip' command is implemented by busybox, which doesn't support the '-o' option. This leads to issues when running connman as the command line is not properly updated. Bug-AGL: SPEC-2921 Change-Id: I5691f04ab462a148219b741d235247a2bfbc2e24 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2019-10-22Add missing space in SRC_URI_append statementJan-Simon Möller1-1/+1
This fixes SPEC-2922. Bug-AGL: SPEC-2922 . Change-Id: I978c3d28e6d62885cd95ca6f2d2b32d34fa6933d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-10-16Post 8.0.2 bump of the distro configurationJan-Simon Moeller1-2/+2
Bug-AGL: SPEC-2859 . Change-Id: Idf2c6c6a216c9239aeacdb2c50f38d11d3b1055a Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-10-15libafb-helpers: bump to latest revisionStephane Desneux1-1/+1
The following commits are added: * 019054d Pkg config files: use CMAKE_INSTALL_LIBDIR var * 826731f Add function to add one json array to another one Bug-AGL: SPEC-2846,SPEC-2867 Change-Id: Ie0c1db8a8c788fa95480dd855137ee0305c439b3 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2019-10-14lightmediascanner.service: Fix for the first bootLeon Anavi1-0/+4
Fix lightmediascanner systemd service to avoiding a race condition with /var/volatile/tmp on the first boot by running it after run-agl-postinsts.service. Furhtermore, for extra safety, a restart on failure has been added. Bug-AGL: SPEC-2869 Change-Id: Ib0cadfaa3b4da2a15ac3cfc04cf6d8174e63eb63 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> (cherry picked from commit 15c979005a29404bfc11da6055f29ee77254b876)
2019-10-11af-main: Starting of HTML, API discovery, fixJosé Bollo1-1/+1
This upgrade includes the 2 fixes and one evolution below: * Add WAIT_FOR_HOST_SERVICE envvar to unit files for webapps * conf/system: fix shebang not absolute * Add discovery of API Bug-AGL: SPEC-2793 Bug-AGL: SPEC-2863 Bug-AGL: SPEC-2871 Change-Id: I48713487899e7e2555c228f1cc732f53bac94203 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2019-10-11Bump waltham-transmitter src revision.Veeresh Kadasani1-4/+4
* b880c4b - waltham-renderer:change pipeline configure name * 2309102 - change output section name for transmitter Change-Id: I60b044ef12d7c47f940e359db36146fb2a6b8d4a Signed-off-by: Veeresh Kadasani <external.vkadasani@jp.adit-jv.com>
2019-10-10agl-service-navigation: add RDEPENDSScott Murray1-0/+2
Add RDEPENDS definition to indicate libjson-c and libdbus-c++ runtime dependency. This fixes a startup problem if libdbus-c++ is not pulled into an image by something else, which will then cause the POI app to crash. Bug-AGL: SPEC-2707 Change-Id: I02b6c120c0fefae972874284c10b6606bab5f647 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-10-06Change distro config for HH 8.0.2halibut_8.0.2halibut/8.0.28.0.2Jan-Simon Möller1-3/+3
Bug-AGL: SPEC-2859 Change-Id: If9a5a32c42b8d1e6f39ff39f6b737608571b5f7f Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-10-06agl-devel.inc: Add modetestLeon Anavi1-0/+2
Add modetest if the agl-devel feature is enabled in images with graphical user interface (GUI), aka wayland. Modetest is part of libdrm and libdrm-tests. It is useful for verification of the DRM/KMS driver functionality. Bug-AGL: SPEC-2465 Change-Id: Iaee906a97b3ee38214b04f603322298fa7adb4c5 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> (cherry picked from commit d6f491229bc3d978503c100df704bdcfd250984b)
2019-10-06raspberrypi4: Fix WiFiLeon Anavi2-0/+49
Apply patch from branch master of meta-raspberrypi as a bbappend to recipe linux-firmware-rpidistro to fix WiFi on Raspberry Pi 4. This is a temporary solution while AGL master is still based on Thud. As soon as AGL moves to newer release of the Yocto Project and layer meta-raspberrypi this patch will become reduntant. The change of boardflags3 value from "0x48200100" to "0x44200100" has been done already in Raspbian (2019-06-20). For more details: https://github.com/RPi-Distro/firmware-nonfree/issues/3 Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ifaafbae6ff59a43f95926e64f1ce35aefadd3cfa (cherry picked from commit ece35b264ff4bac33a37a96cd166c2e0fe8bb433)