Age | Commit message (Collapse) | Author | Files | Lines |
|
Changes include:
- Backport gstreamer 1.16.2 vs 1.16.3 workaround for rcar3
(originally for SPEC-3706 in master, now updated per SPEC-3803).
- Add 1.16.% wildcard version of meta-rcar-gen3-adas Kingfisher
support layer gstreamer1.0-plugins-bad bbappend. The issue is the
same as with the main meta-rcar-gen3 BSP layer bbappends mentioned
above, but this particular bbappend has been disabled in the newer
BSP in master/koi, so they did not need a fix.
- Add override of PREFERRED_VERSION_libdrm for rcar3 to quiet
warnings about 2.4.100 not being available, which are caused by
dunfell 3.1.5 bringing an update to 2.4.101.
- Pin Raspberry Pi kernel version to 4.19. meta-raspberrypi
upstream has switched their default kernel to 5.4 on their
dunfell branch, but that significant of a change is not desirable
in a AGL point release.
- Remove now upstreamed systemd patch.
Bug-AGL: SPEC-3793, SPEC-3803
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia678b8f56f35026a62a9f6ab40f9727b10756ad6
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26042
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Update SRCREV in pyagl recipe to pick up:
50083ae Support specifying CAN interface for tests
Bug-AGL: SPEC-3756
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia2f55d19ee174ff6c9252d48e2b5a458d23b9030
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25909
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add a dev-mapping-ci recipe that installs a CI specific version of
/etc/dev-mapping.conf for the agl-service-can-low-level binding.
Additionally, the now required "j1939" bus mapping has been added
to the default dev-mapping recipe's conf file.
To enable use of the new recipe, the definition of the variable
PREFERRED_RPROVIDER_virtual/low-can-dev-mapping has been updated in
poky-agl.conf to enables it based on the AGLCI DISTRO_FEATURE.
Bug-AGL: SPEC-3756
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia980ed5e556bad9097ca0c305d1e26b21b10a9ac
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25908
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Update SRCREV in pyagl recipe to pick up:
ec6ca6b Mark CAN J1939 tests as xfail for now
Bug-AGL: SPEC-3765
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ide34629d531355b6692706a5cf6df3e494af3681
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25892
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Shift the IMAGE_INSTALL_append of the kernel-devicetree package to
agl_rcar-nogfx.inc so that it will be added to the *ulcb-nogfx images
in addition to the *uclb images. This fixes booting the nogfx images
from SD cards created with the wic.xz image.
Bug-AGL: SPEC-3754
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: If4868326f50e45046fcce7b5d6ba43f13f746ec1
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25866
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 47464de6ae327896b2d2e5047275d933010b5eeb)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25781
|
|
This is added in the release builds only.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I6336f9862489121b0e5385c8aac28cc58065c700
|
|
This adds the CI mirror settings to the template.
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I52e6e772375e0a44f91ba66a0beae2c88d3b172b
|
|
Bump the distro config after the release of 10.0.1 .
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I1ea78c5dca2f7ce602643cbe2950476df75f5408
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25811
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Add a mechanism in the weston-init recipe to allow machine templates
to trigger installation of a systemd drop-in that adds a DRM device
dependency for the weston@.service unit. Also, tweak the qemux86-64
configuration to enable doing so against dev-dri-card0.device to avoid
startup failures due to the slow i915 initialization on e.g. the
UpSquared. This approach has been taken since it seems safer for now
to only apply it for qemux86-64 than doing a blanket default that
might then need to be over-ridden for vendor BSPs.
Bug-AGL: SPEC-3518
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I74ce4f878f9aa3f0d555f96a79578f3d8ca72550
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25688
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Update pyagl SRCREV to pick up:
9a7c3f4 Add HVAC bindings and tests
01131b1 Add marks for Internet requiring tests
31737ec Add simple wrapper script
ca505ea Add CAN value tests
10a4867 Allow pyagl CAN test test_write_wo_auth to xfail
Also add installation of the new wrapper script as /usr/bin/pyagl.
Bug-AGL: SPEC-3648, SPEC-3684, SPEC-3685, SPEC-3660
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I251d25b5bf7dd1134cbf22c0352875e1a615ddd8
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25721
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Renesas website change for a new one.
We need to change the name of downloaded drivers because of that.
Bug-AGL: SPEC-3715
Change-Id: Ia55f0b3288a195b8f8fb6319f5744c92b2c57a55
Signed-off-by: Frederic Marec <frederic.marec@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25738
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Update the distro configuration file.
Bug-AGL: SPEC-3711
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I01e42d713e1d77fdc52f2d87c0e0ab701d5331a1
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25724
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
As part of the fixes for compositor start up failures on UpSquared,
backport the fix for cleaning up the DRM backend when start up fails.
This does result in start up working on the UpSquared, but usually
after one or more failures, so a systemd dependency to avoid that will
also be added via another change. However, this particular fix still
seems worth applying as it may be potentially useful for AGL members
that roll their own customized distributions.
Bug-AGL: SPEC-3518
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I825e9935706fa09c44cf4a57b33cb910dc0f3aaf
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25711
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The i.MX8 crosssdk build failure in SPEC-3626 was root caused to the
DEFAULTTUNE variable being over-ridden via a machine over-ride
triggered by a MACHINEOVERRIDES addition in meta-freescale's
imx8mqevk.conf. To ensure that aarch64 machines use AGL's desired
aarch64 tuning, switch the DEFAULTTUNE definition done in
aarch64-tune.inc to using the "poky-agl" over-ride that comes after
MACHINEOVERRIDES in the OVERRIDES variable definition.
Bug-AGL: SPEC-3626
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Id07f73056dd75ba7cf130376e65f2731302b7e66
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25488
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 0d89af5ac5d55ca3250688a2ecfcd0f63e02d529)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25606
|
|
This is a backport of https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25443
from master and will allow CI on jellyfish to use sound on qemu platforms
(emulated HDA card).
Bug-AGL: SPEC-3612
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I75daee8834fa9dc8223d84ba16d9d04620984350
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25637
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
The version 2.1 fixes a critical database issue.
Bug-AGL: SPEC-3677
Change-Id: I93fadbd1c12799d412724ea3e887d4910c74bbb1
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25553
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This is required to have the sample cmake files present in the SDK.
These are mentioned in the cmake-apps-module documentation.
Bug-AGL: SPEC-3688
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I54012c9ef5c5c55b24d05789df852ba2a3b947c3
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25559
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
(cherry picked from commit ad0c63129cfdd1553bae21e14445ef025d4c0808)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25597
|
|
* For the agl-cluster-demo-platform image we need to apply a patch
on gstreamer1.0-plugins-bad package. For now the RCAR was exclude, for
an unkwon reason.
Bug-AGL: SPEC-3632
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: Ib94edf4717184946dfa20a5319d171757027ce4e
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25442
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 43be51ec502907d66c6e3817f3745422c33b48a6)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25390
|
|
This patch enables the VETH kernel config.
We use this to make sure the network binding finds a valid
ethernet device through connman even if 'eth0' is
used by nbd and thus not visible to connman.
Bug-AGL: SPEC-3631
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I056ff6dc8f83bdb707cfbac90562388c4e742b43
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25421
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
(cherry picked from commit 1aaa9128f1dae5365a0ca113c8b71583a3c9a008)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25386
|
|
do_image_wic will run in parallel with other jobs
in the current codebase of OE. Then these other
jobs might get the wrong content for
/etc/fstab that is modified by do_image_wic.
To prevent this behaviour, disable the modification in wic.
NOTE: This might have consequences on custom or complex
wks files. Thus allow the user to override this.
Bug-AGL: SPEC-3621
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I03cb589fb592c1d7e0ccfff54535b91ba73974be
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25412
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit 6d46b8cb03890d899af2bf6e5222dc0954836c90)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25387
|
|
Update pyagl SRCREV to pick up:
6703d65 Add radio binding tests
1261d4e Fix CAN test data installation
3fbb286 Skip signal composer tests by default
abee03b CAN test rework to improve robustness
a7e00ab Remove "regular" test marking
115ab91 Add CANService tests
69f6e12 Add timeout ability to AGLBaseService.listener()
b8fd8f4 Fix signalcomposer test
491bfa7 Override un/subscribe methods in CANService
8a32ec3 Fix AGLBaseService.afbresponse() for EVENT data
b75deb7 Update tox.ini and requirements.txt
7c9ed37 Add gitreview file for jellyfish branch
Bug-AGL: SPEC-3583, SPEC-3585
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ic60daf4457c64fb05ab09bf61398d5361eea29d4
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25406
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The previous aglwgt.bbclass change to make build/package errors fatal
now trips up on the HTML5 applications, as they do not produce a debug
widget, and the logic changes assumed that all widget builds would
have one. To handle this, if there is no debug widget present when
doing do_install, check the config.xml file in the release widget and
do not throw an error if the widget type is "text/html".
Bug-AGL: SPEC-3593
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: If58c3065464d2d2ea3d78b8ce31304d00fae6504
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25377
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Update low-level-can-generator SRCREV to pick up changes:
cc0c59a Update to match current binding expectations
Bug-AGL: SPEC-3551
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: If22be47b82c19d21e723e94d35b34416e5f738c1
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25360
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add kernel configuration fragment to enable overlayfs. The initial
planned use is for enabling generating coverage results on target,
but it will also be useful for container runtimes.
Bug-AGL: SPEC-3589
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I4dd5ddd2da52eac5b273b01be51339e03786b845
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25336
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit f5b7b4a5c5ffcd51509c3ed57dfb08fdce6cf01c)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25328
|
|
Changes:
- Add recipe for gcovr gcov-based coverage report generating tool.
- Add bbappend to apply patch to gcovr to add a new command-line
option that allows working with the coverage information from the
AGL widgets on target. The goal is to get this change upstream,
hence not having it in the recipe (which also will be sent for
inclusion in meta-oe).
- Add a recipe to install an included wrapper script for gcovr
(unsurprisingly named "gcovr-wrapper") that enables running it
against bindings on target. The script supports installing the
coverage version of a binding and running pyagl tests, afm-test
test widget, or a user-supplied command before running gcovr in a
carefully crafted environment that will allow it to work without
impacting the root filesystem of the target.
- Add gcov-symlinks, gcovr, and gcovr-wrapper to the
packagegroup-agl-core-devel package group so they will be
available in agl-devel images. The gcov-symlinks package adds
/usr/bin/gcov, which simplifies picking it up for gcovr.
Bug-AGL: SPEC-3589
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia2fdc200e4e0683f93a6e2a863311cd2107c962b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25337
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 6ac60a0f98d9048fa7dd3cbcd95a9409cbe0c4fa)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25329
|
|
Now that all upstream widgets have updated autobuild scripts,
aglwgt.bbclass can stop ignoring autobuild failures, any failure will
now again be caught in do_compile and not at packaging time.
Bug-AGL: SPEC-3593
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Idd70a7decf422fa9390d675ad9a4f2729023f322
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25317
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The merge window for 10.0.1 is open now.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I4e18c218986d59f95bb9cd57f81970cf4d996d6c
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25353
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Change the distro manifest file.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I8456667007788f6ae0f709d3735d3325695ff9b6
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25314
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Bug-AGL: SPEC-3581
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I508e2b58a2d0297805f7702fd39a93bfe396203a
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25294
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Update the .gitreview file.
Change-Id: I6e4e73fbd27dbccfe3bbf25f4fa037225a54eccd
Bug-AGL: SPEC-3581
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change the distro config.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I04ef32a1a7f59a7b2f7cd67fb566c9ebc82fa6a3
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25257
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Bug-AGL: SPEC-3571
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
Change-Id: I54309f4fd65a1456baf6dcef6029d756ebf48c81
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25264
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Adapt the distro config for 9.99.4 .
Change-Id: Ie08d8fde5560fa80562d5a3d9852c53ae849d0a2
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25244
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
This fixes:
WARNING: wam-git-r0 do_package_qa: QA Issue: wam: SRC_URI uses PN not BPN [src-uri-bad]
WARNING: chromium68-git-r0 do_package_qa: QA Issue: chromium68: SRC_URI uses PN not BPN [src-uri-bad]
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I35bd763d1b32a4ebb03861e2b7278fbe0ff402cc
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25241
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Update pyagl SRCREV to pick up:
bc241e8 hwrequired marking of audiomixer tests
6cffabd Improve LAVA output
Bug-AGL: SPEC-3572
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I09aa6e306940d6b32517897b176bc50bbb0ca691
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25242
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Update SRCREV to include a work-around for clients that will set-up an
application after the initial commit of the surface.
The following changes have included in this bump:
0056122343c7829 layout: Activate by default xdg surface that do not have an app_id set
8769c76e59ec448 layout: If no valid output found, abort early with a protocol violation
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: I074d159f70c9e86527c9721bfc26519fce7ea838
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25243
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Pick up changes:
61e96d1ee src/ui/ozone/platform/wayland: Avoid attach/commit the buffer if the configure event wasn't received
e2b16824b Wayland: do not commit or attach buffers before configure has been ACK
c40b21b88 [BACKPORT] [ozone/wayland] Use surface listener to get display for widget.
71378c807 [BACKPORT] [ozone/wayland]: WaylandScreen: return widget on screen point.
Bug AGL: SPEC-3544
Signed-off-by: Lorenzo Tilve <ltilve@igalia.com>
Change-Id: I2134b781a1d5227d3f4d3939442b7cf72d0f0d97
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25237
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
To enable handling coverage wgts in CI, we need gcov
for postprocessing in the filesystem.
Bug-AGL: SPEC-3484
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I9af415ce8da499637af4d2e9680bdc5d9c7fc9e4
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25234
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
fe20f1b: fix handling of telephony events
Bug-AGL: SPEC-3515
Signed-off-by: Raquel Medina <raquel.medina@konsulko.com>
Change-Id: Id9399adb872b37e1977c9feffed8f750b0d3f263
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25199
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Add recipe for pyagl, and add it as a dependency of
packagegroup-agl-core-devel.
- Add recipes for pyagl dependencies python3-asyncssh,
python3-pytest-dependency, and python3-pytest-reverse.
The intent is to get these into upstream meta-python so these
local copies can be dropped when they're available from there.
Bug-AGL: SPEC-3562
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I876ef2fffbe8724aadb23170e1ed196f05132f89
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25176
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
WebAppMgr depends on weston@display.service
Bug-AGL: SPEC-3544
Signed-off-by: Antia Puentes <apuentes@igalia.com>
Change-Id: I5dc0980237a7a09306c7aec88b7dbeba807d2fcd
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25174
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Merge window for rc4 is open.
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I0649b6b6a7a82181f1e0a1eb787a7a252353ea97
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25173
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Include additional improvement related to iMX8MQ, which should help to
mitigate audio issues.
First, add a warning if not all the committed data is actually
read/written.
Secondly, if snd_pcm_hw_params_is_batch == 1 tweak the delay to make
sure at least a period is available in the buffer to avoid xrun.
Bug-AGL: SPEC-3410
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Change-Id: Ief2e69960b3e13c1d5085581d1a7c7b3e73570c0
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25164
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Initial tests of AGL with etnaviv showed random GPU hangs. After
discussion add some mainline patches not yet present in linux-fslc-imx
in order to fix them.
BUG-AGL: SPEC-3520
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Change-Id: I8ac51e7ec91fa033554270cd79ca1b55c5862103
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25163
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
agl-service-windowmanager, libwindowmanager and qlibwindowmanager are deprecated.
Runxdg is using these and no longer required.
Also remove qtaglextras.
Bug-AGL: SPEC-3555
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I412035ea0e9694aad84aa2e8294b4d52f70f57e4
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25161
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
This is empty and replaced by the specific xen feature.
Bug-AGL: SPEC-3555
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: Ide39a96b3ac5dc9f3b01212d16e6a6f75aab3e1f
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25160
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Remove scripts that supported the EOL Joule board.
Bug-AGL: SPEC-3555
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I2a50ed2631ff1bc961717e7cff27b861f6c43d5b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25159
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
The eclipse plugin is no longer actively supported upstream. Remove the plugin from agl-devel.
Bug-AGL: SPEC-3555
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I455472cd93fb4db93e72c5be91f66bddc4b7e460
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25165
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
The patch needs to be refreshed.
Bug-AGL: SPEC-3555
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I5532f7ed108537d00ea901479122bfdf1008764d
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25166
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Add pciutils to packagegroup-agl-core-devel so tools like lspci are
consistently available in devel builds for debugging.
Bug-AGL: SPEC-3148
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I5794c092a2f6d2eff123d19bb5a9658ef43a62fe
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25155
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|