summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-06-09Merge "Pin SRCREV used by ti-sgx-ddk-km"Jan-Simon Moeller1-0/+1
2019-06-09Merge "Fix rpi touchscreen support on master"Jan-Simon Moeller9-4/+1120
2019-06-07Merge "meta-agl-profile-graphical-qt5: Add qtaglextras"Jan-Simon Moeller1-0/+28
2019-06-07Merge changes If80c4e71,Ic0cf9128Jan-Simon Moeller2-5/+25
* changes: Fix : do_patch waring weston 6.0.0 [RCAR] Remove unnecessary device tree file
2019-06-07Fix : do_patch waring weston 6.0.0Harunobu Kurokawa1-5/+5
Backport weston patch to Fix do_patch warning. http://git.yoctoproject.org/cgit/cgit.cgi/poky/tree/meta/recipes-graphics/wayland/weston/0001-make-error-portable.patch -- WARNING: weston-6.0.0-r0 do_patch: Some of the context lines in patches were ignored. This can lead to incorrectly applied patches. The context lines in the patches can be updated with devtool: devtool modify <recipe> devtool finish --force-patch-refresh <recipe> <layer_path> Then the updated patches and the source tree (in devtool's workspace) should be reviewed to make sure the patches apply in the correct place and don't introduce duplicate lines (which can, and does happen when some of the context is ignored). Further information: http://lists.openembedded.org/pipermail/openembedded-core/2018-March/148675.html https://bugzilla.yoctoproject.org/show_bug.cgi?id=10450 Details: Applying patch 0001-make-error-portable.patch patching file configure.ac Hunk #1 succeeded at 126 with fuzz 2 (offset 17 lines). patching file libweston/weston-error.h patching file libweston/weston-launch.c Now at patch 0001-make-error-portable.patch Bug-AGL: SPEC-2499 Change-Id: If80c4e71be1f58362c78fec9ca6c2ca29d224c39 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-06-06meta-agl-profile-graphical-qt5: Add qtaglextrasScott Murray1-0/+28
Add qtaglextras to meta-agl-profile-graphical-qt5. This is required to fix building the cluster demo SDK now that qtaglextras has been added to packagegroup-qt5-toolchain-target. Bug-AGL: SPEC-2484 Change-Id: Ife540347c4b3912841a9d0e2d895afc458ca904c Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-06-06Pin SRCREV used by ti-sgx-ddk-kmPaul Barker1-0/+1
The commit of the omap5-sgx-ddk-linux git repository used by the ti-sgx-ddk-km recipe is changed by recent commits to meta-ti to introduce generic support for armel (soft-float) targets. This conflicts with the existing patch in meta-agl which adds support for our toolchain. The simplest fix is to pin to a working commit by setting SRCREV to the previous commit on the same branch. This is the same commit that is currently used and so it won't have any effect until the meta-ti layer itself is updated. For reference, the commit in question can be seen here: https://git.ti.com/graphics/omap5-sgx-ddk-linux/commit/dbdbd9309a58ee723fc827ef5fd45c28347cf61f Bug-AGL: SPEC-2490 Change-Id: I2924cdadd697680567a9378eb3242f8dd526a429 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-06-06[RCAR] Remove unnecessary device tree fileHarunobu Kurokawa1-0/+20
Bug-AGL: SPEC-2486 Change-Id: Ic0cf9128d1630ede1af8024e3bd5258b7529b683 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-06-05Fix rpi touchscreen support on masterJan-Simon Möller9-4/+1120
We seem to miss a few bits that changed between kernel 4.9 and kernel 4.14 regarding the 7'' touchscreen. One addition is the rpi-backlight.dtbo which we also need to use in our create-combined-dtb recipe for CI use. We also seem to require https://github.com/raspberrypi/linux/pull/2693#issue-217750943 . Thanks to Scott Murray for the help digging through this. v2 and v3: add devicetree changes v4 and v5: fix name of dtbo v6: move append to machine include - we need it as a global var v7: add to config.txt for sdcard boot case Bug-AGL: SPEC-2465 Change-Id: I2bb3cd974b74a790292e1f36ffdca034928e0bca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-06-01Prepare HH RC1 releasehalibut_7.99.1halibut/7.99.17.99.1Jan-Simon Möller1-3/+3
Bump the distro configuration. Change-Id: Icb7ac269a6b8cdd74f2b2d1d4a85d51202c9225e Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-31Fix the location of the qemu bbappendJan-Simon Möller1-0/+0
The previous commit had it in the wrong folder. Correct that. Change-Id: Iadced308d90f4bb0babb40cc7e37f4c20a93a860 Bug-AGL: SPEC-2450 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-31Merge "Move hmi-framework and eg-virt from meta-agl-devel to meta-agl"Jan-Simon Moeller14-0/+193
2019-05-29Add weston 6.0.0 for WM and HS rewriteJan-Simon Möller11-2/+441
As requested for the WM and HS rewrite. Tested on m3, minnow, qemux86-64, rpi3. (cherry picked from commit fda5568cf4bc268088c9d1f925007d682bb7ef5d) Multiple commits to applied at once. Bug-AGL: SPEC-2444 Change-Id: I3f74b40213d4c4a65400a53fe9c57f52fe3b6096 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-28Updated topic title for AGL layers intro "master"Scott Rifenbark1-1/+1
The title for the overview of the AGL Layers topic was badly named. It was called "AGL Overview", which indicates an overview of AGL itself. The topis really an introduction to the layers that AGL uses. I changed it to "Overview", which also matches how the topics are named for "guppy" and "flounder". Signed-off-by: Scott Rifenbark <srifenbark@gmail.com> Change-Id: I230e3e4ffae47e550f25723823dae6c8456beafb
2019-05-28Merge "Revert "Add gst-record argument to weston option""Jan-Simon Moeller1-1/+1
2019-05-28Merge "SPEC-2376: Add virtio configs for QEMU arm/arm64 kernels"Jan-Simon Moeller2-0/+5
2019-05-28SPEC-2376: Add virtio configs for QEMU arm/arm64 kernelsCorentin Labbe2-0/+5
QEMU arm/arm64 need some VIRTIO configs for having storage for rootfs. Bug-AGL: SPEC-2376 Change-Id: Ia4b53092418b9f5e4040b8dafc58262a98bcac46 Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
2019-05-27Revert "Add gst-record argument to weston option"Harunobu Kurokawa1-1/+1
Bug-AGL : SPEC-2420 This reverts commit b4cd3148e509f566b1a28a02a5f1032ad48aad8c. After weston 6.0 or later, remoting plugin is used instead of current gst-record. The argumant "--gst-record" is not necessary. Change-Id: I580c2acb63a86b2780f0b1b0ba4b4cb357669f39 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-05-24On master enable the CONFIG_USB_NET_SMSC75XX driverbuild.automotivelinux.org1-3/+3
This is for the 3b+ board. Change-Id: I428a12b836c1f7c3f01b29602e666ae28efd647f Bug-AGL: SPEC-2456 Signed-off-by: build.automotivelinux.org <jenkins@automotivelinux.org>
2019-05-24Merge "setup_mm_packages.sh: Use GFX 3.19 binaries instead of 3.15"Stéphane Desneux1-0/+48
2019-05-24setup_mm_packages.sh: Use GFX 3.19 binaries instead of 3.15Pierre MARZIN1-0/+48
Renesas BSP 3.19 is not actually available. But the graphics binaries are. So this patch get the 3.19 GFX binaries to patch the 3.15 GFX binaries ones. To achieve that, the following zip is needed: "R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-weston5-20190516.zip" (Note: the name of the zip can change). By this way, BSP 3.15 of Renesas will be used with the 3.19 GFX binaries. This solves the graphic issue of the M3ULCB and H3ULCB boards. This hotfix has been tested on m3ulcb with success. Warning: This patch has to be revert when the BSP of Renesas will be updated to 3.19 (at least). Bug-AGL: SPEC-2253 Change-Id: Ieaab76fb08618f9994c3ff5969d9a361d08b65d2 Signed-off-by: Pierre MARZIN <pierre.marzin@iot.bzh>
2019-05-23Move hmi-framework and eg-virt from meta-agl-devel to meta-aglJan-Simon Möller14-0/+193
Part of the layer cleanup. Bug-AGL: SPEC-2450 Change-Id: I0e0517c6f5aeaa1378715acde8adda6200119aba Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-21Merge "Remove the 64bit rpi3 target"Jan-Simon Moeller3-29/+0
2019-05-21Remove the 64bit rpi3 targetJan-Simon Möller3-29/+0
As memory is already low on 32-bit, the 64-bit target is deprecated for now. There is no benefit in maintaining two targets atm. Change-Id: I29d755ff70693280dcc1e4ce996bd4c2894bacfb Bug-AGL: SPEC-2323 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-20Bump app-afb-test SRCREV to fix also p-prefixJan-Simon Möller1-3/+3
We were missing the SRCREV bump on afb-test. This also fixes the '/p' prefix issue. v2: fix gitsm -> git in SRC_URI and brain bug on RDEPENDS vs. DEPENDS. Bug-AGL: SPEC-2423 Change-Id: Ibcec604ee5b3441e6863c3eaf8ee8ceaa3ee16d6 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-20Remove legacy 'p' prefix in gerrit urlJan-Simon Möller1-1/+1
Bug-AGL: SPEC-2423 . Change-Id: If937e6b7891d5d697f5d25e8439b5811453ccb5d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-14meta-agl-bsp: meta-sancloud: weston-ini-conf: Use 720p resolution where possiblePaul Barker1-0/+3
The BBE is has fairly limited CPU and Graphics power so everything is sluggish at 1080p. Things work much better at 720p. However, if the 'hdmi-a-1-270.cfg' file has been removed (for example, when building the cluster demo) then don't try to modify it. Bug-AGL: SPEC-2409 Change-Id: I614bf6a7d65f5d51b6f9b1b776851562151fe2f6 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-14meta-agl-bsp: meta-sancloud: weston-ini-conf: Set correct gbm-formatPaul Barker1-0/+3
The default gbm-format needs to be changed on the BeagleBone Enhanced due to a hardware errata on the AM335x SoC. For further details see the following section of the TI wiki: http://processors.wiki.ti.com/index.php/Processor_Linux_SDK_Graphics_and_Display#AM3_Beagle_Bone_Black_Board_Configuration The TI documentation recommends further changes to powervr.ini and qt_env.sh. The change to powervr.ini is already applied in the meta-sancloud layer and the change to qt_env.sh was found not to be needed. Bug-AGL: SPEC-2409 Change-Id: Iec91ab939b13bd4f936e64681d45931dafb8ee91 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-14meta-agl-bsp: meta-sancloud: linux-bbe: Reserve 256MB for CMAPaul Barker2-0/+5
The tilcdc DRM driver needs more CMA memory available than we reserve by default in order to give a working GUI in AGL guppy. Bug-AGL: SPEC-2409 Change-Id: I0e09773c37133db86520fc15ed0ad11e80382b2e Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-14meta-agl-bsp: meta-sancloud: linux-bbe: Apply AGL kernel changesPaul Barker1-0/+1
This is the first step towards integration of the Sancloud BeagleBone Enhanced (BBE) BSP with AGL. When building the BBE kernel for AGL we need to pick up the correct .inc files. Bug-AGL: SPEC-2409 Change-Id: I05fe3094e75e873984df57f9610c704dd3c10e29 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-14meta-agl-bsp: meta-ti: weston-ini-conf: Apply only to dra7xx-evmPaul Barker1-2/+2
The git history shows that the weston-ini-conf changes in meta-agl-bsp/meta-ti were added to support the dra7xx-evm. These changes should not be applied for other machines which use the meta-ti layer such as the beaglebone and bbe. Bug-AGL: SPEC-2409 Change-Id: Ia21425bfda3ec03ef51371c14fcbca94a5067a7c Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-05-14Merge "Fix the headline of meta-agl document."Jan-Simon Moeller1-2/+2
2019-05-13Fix the headline of meta-agl document.Li Xiaoming1-2/+2
Below url's toppart seems un-official. http://docs.automotivelinux.org/master/docs/devguides/en/dev/reference/meta-agl.html Bug-AGL: SPEC-2382 Change-Id: Icfffa07e2fbc0a6aeaa83580d7e0007805bd5267 Signed-off-by: Li Xiaoming <lixm.fnst@cn.fujitsu.com>
2019-05-08agl-service-bluetooth-map: add recipe for bluetooth MAP serviceMatt Ranostay1-0/+1
add agl-service-bluetooth-map to packagegroup-agl-core-services Bug-AGL: SPEC-2351 Change-Id: I7242377f1b55c2e24f0d0f0124e0f1319544d380 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-05-08meta-agl-profile-core: recipes-apis: agl-service-bluetooth-map: add initial ↵Matt Ranostay1-0/+18
recipe Add initial recipe for the Bluetooth MAP (Message Access Profile) binding. Bug-AGL: SPEC-2351 Change-Id: I9a40091f218e6ccef7af64aaed8d04b7cc605455 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-05-06Bump libappcontrollerRomain Forlot1-1/+1
baaa511 - Inject binding v3 root api into controller plugins 3224600 - Fix: wrong string length size used c32fc14 - Fix .deb packaging following review 20926 9fab427 - controller: fix broken link cf08755 - devguides-book: needed for AGL documentation Bug-AGL: SPEC-2369 Change-Id: If2ea6d0d560b8ec78e31d402dec7a7482a3c7768 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
2019-05-03agl-service-signal-composer: Library dependencyFrederic Marec1-1/+1
As the "controller" and "helper" aren't any more submodules but in libraries, it is required to add the dependency in the recipe. Bug-AGL: SPEC-2139 Change-Id: I377113b733c30d9a51297155c695ae98f151fbed Signed-off-by: Frederic Marec <frederic.marec@iot.bzh>
2019-05-03Merge "af-binder: New packaging"José Bollo1-28/+53
2019-04-30af-binder: New packagingJosé Bollo1-28/+53
Improve how the binder is packaged. Bug-AGL: SPEC-2165 The issue was that the debug symbols were not at the expected place. It came from the way bitbake packages debug meterials: the first package with -dbg extension receive all the debug items. Change-Id: I2f5470ded58bc782c9a9804373a5eb76b331f5ae Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2019-04-29meta-intel: Support the upsquare boardCorentin Labbe4-0/+16
This patch adds the necessary CONFIG for booting the upsquare board. The upsquare have an R8169 ethernet card and need it built-in for the kernel DHCP autoconf to work. The upsquare need some MFD_INTEL configs to boot. The meta-intel miss some CONFIG necessary for LAVA and NBD to works. Bug-AGL: SPEC-2075 Change-Id: Iad63e0f0b978bb75f8d8759ad353e7952b63a2ab Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
2019-04-29Merge "Add ARC HSDK board support"Jan-Simon Moeller5-0/+13
2019-04-29Merge "Change the navigation application default to the new navigation ↵Jan-Simon Moeller1-0/+3
application"
2019-04-29Merge "Remove inactive devices"Jan-Simon Moeller14-139/+0
2019-04-29Remove inactive devicesJan-Simon Möller14-139/+0
Remove device which are EOL, unused or do not work. As discussed during the SAT call: - rpi2 : -- will not work for IVI due to the CPU -- use the rpi3 instead - joule : -- EOL for ~1y, no longer available for purchase, no way to test. i.MX6: Remove currently unmaintaned boards. Can re-add on request. - imx6qsabrelite: -- replaced with uprev'd imx6qsabreauto -> imx6qdlsabreauto - nitrogen6x: -- no thud branch upstream. Bug-AGL: SPEC-2323 Change-Id: I28a70dcb7b48b6a9396d3003cc34d4c1f6570eca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-26Merge "Fix imx6qdlsabreauto machine configuration"Jan-Simon Moeller13-494/+30
2019-04-26Add ARC HSDK board supportEvgeniy Didin5-0/+13
This changeset adds the necessary files to build image for Synopsys ARC HS Development Kit (HSDK). Most of necessary tunnings are stored in meta-synopys layer. Synopsys DesignWare HSDK (which stands for ARC HS Development Kit) is the latest and greatest development platform that sports quad-core ARC HS38 in real silicon. Most noticeable features of the board are: * Quad-core ARC HS38 CPU running at 1GHz * 4Gb of DDR * Built-in Vivante GPU * Built-in Wi-Fi/Bluetooth module Peripherals: * [micro] SD-card slot * 2 USB 2.0 ports * 1Gbit Ethernet port * Built-in Digilent JTAG probe * Serial port accessible via micro-USB port New feature: SPEC-2346 Change-Id: I8772ee51cc3db9f6549da2d6a5ea2d116586cde6 Signed-off-by: Evgeniy Didin <didin@synopsys.com>
2019-04-23Fix imx6qdlsabreauto machine configurationBechir Mghirbi13-494/+30
The imx6qsabreauto target was falling behind and could not be build for GG-7.0. The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro. However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets. This patch makes the required changes to fix the imx6qsabreauto machine configuration: - removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro - updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer - deletes reference to packagegroup-fscl-* not required to build AGL - add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon' v2 (jsmoeller): moved board name to match MACHINE v3 (bechir.mghirbi): - remove wayland_2.0.0 as weston_4.0.0.imx is used. - use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard' - Add CFG80211 Kernel configuration Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-23meta-agl-profile-core: Add mosquitto to passwd / groupScott Murray2-0/+2
Add entries for the mosquitto daemon to the static passwd and group files to allow building it into images. Since there is not really a mechanism for doing this in the telematics profile without a full duplication of the files, adding it to the core version seems required for now. Change-Id: I50248a7d2b2a2ed5539ba002d9521c0e0fd14034 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-04-16meta-agl.md: remove link to meta-agl-extraClément Bénier1-1/+1
- this link does not exist anymore Change-Id: I912a0396d890b8548d3d8388852c685ee17d2d2b Signed-off-by: Clément Bénier <clement.benier@iot.bzh>
2019-04-14Change the navigation application default to the new navigation applicationJan-Simon Möller1-0/+3
Now that the new navigation application is ready, change the default navigation application. This replaces https://gerrit.automotivelinux.org/gerrit/#/c/19831/ . Change-Id: Iac516672087d231d5ea0b43764ce12e3d3c20580 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>