summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/conf/include/agl_raspberrypi3.inc
AgeCommit message (Collapse)AuthorFilesLines
2021-02-17Update to YP dunfell 3.1.5Scott Murray1-0/+3
Changes include: - Backport gstreamer 1.16.2 vs 1.16.3 workaround for rcar3 (originally for SPEC-3706 in master, now updated per SPEC-3803). - Add 1.16.% wildcard version of meta-rcar-gen3-adas Kingfisher support layer gstreamer1.0-plugins-bad bbappend. The issue is the same as with the main meta-rcar-gen3 BSP layer bbappends mentioned above, but this particular bbappend has been disabled in the newer BSP in master/koi, so they did not need a fix. - Add override of PREFERRED_VERSION_libdrm for rcar3 to quiet warnings about 2.4.100 not being available, which are caused by dunfell 3.1.5 bringing an update to 2.4.101. - Pin Raspberry Pi kernel version to 4.19. meta-raspberrypi upstream has switched their default kernel to 5.4 on their dunfell branch, but that significant of a change is not desirable in a AGL point release. - Remove now upstreamed systemd patch. Bug-AGL: SPEC-3793, SPEC-3803 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia678b8f56f35026a62a9f6ab40f9727b10756ad6 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26042 Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-05-12Update Raspberry Pi (3/4) templates to match meta-raspberrypi configurationJan-Simon Möller1-29/+7
Update the templates to use the updated flags and configuration present in meta-raspberrypi. The previous template did not properly pull-in the u-boot fragments for the RPI4. v4: the MACHINE in the AGL template for the RPI4 is now 'raspberrypi4-64' as in upstream. CI will get support-patches through releng-scripts. Bug-AGL: SPEC-3368 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Ia2acb54516464d433c64adfc7ba832ccfdf899c3
2020-04-27meta-agl-bsp: update raspberrypi configuration for dunfellScott Murray1-3/+0
Changes: - Remove Mesa version over-ride, since dunfell has newer version. - Remove bcm2835-bootfiles SRCREV updates since dunfell has newer versions of the files. - Remove kernel SRCREV update in linux-raspberrypi_4.19.bbappend since dunfell has newer version, and add include of new linux-4.19-agl.inc to keep getting CAN qdisc patch. Bug-AGL: SPEC-3302 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I7f7a9b454de9eb4fae7075b30ee89b3aec4e6a43
2020-03-18Consolidation of AGL_DEFAULT_IMAGE_FSTYPES after review of machine useJan-Simon Moeller1-1/+0
After reviewing what all machines actually specify as 'extra', the conclusion was that the actual 'default' is 'wic.xz' . Consequently make this the new default and remove it from the board configs. v2: add ext4/ext4.xz for netboot feature Bug-AGL: SPEC-2771 Change-Id: I082f87a07dcacb962d10efd90ba2476f87896302 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-11-05agl_raspberrypi3.inc: Switch to firmware KMSLeon Anavi1-0/+11
Swith to firmware KMS with appropriate Linux kernel and Mesa version to support both HDMI and the official 7" Raspberry Pi touch screen display on Raspberry Pi 3B/B+ and 4. Device tree changes are not required for firmware KMS. Bug-AGL: SPEC-2465 Change-Id: I5f8f62c0151b7eb79ab1f96419d9c62469a1554e Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-08-30agl_raspberrypi3.inc: Set CMA for SOTALeon Anavi1-0/+2
Add CMA to the kernel arguments in uEnv.txt for U-Boot in images with enabled feature agl-sota for software-over-the-air (SOTA) updates for Raspberry Pi 3 B/B+. Bug-AGL: SPEC-2729 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Id6914de6a41ebfd3fc28ca2948a15d891c9a30b3
2019-07-13Revert "Fix rpi touchscreen support on master"Jan-Simon Moeller1-8/+0
We need to reconsider this changeset. It seems to produce a regression. This reverts commit ccb667c35ffdea7a2bc1304750e6b22368cd55f7. Change-Id: I42754a899e8530f4e18a069ed227f18a8d615801
2019-06-05Fix rpi touchscreen support on masterJan-Simon Möller1-0/+8
We seem to miss a few bits that changed between kernel 4.9 and kernel 4.14 regarding the 7'' touchscreen. One addition is the rpi-backlight.dtbo which we also need to use in our create-combined-dtb recipe for CI use. We also seem to require https://github.com/raspberrypi/linux/pull/2693#issue-217750943 . Thanks to Scott Murray for the help digging through this. v2 and v3: add devicetree changes v4 and v5: fix name of dtbo v6: move append to machine include - we need it as a global var v7: add to config.txt for sdcard boot case Bug-AGL: SPEC-2465 Change-Id: I2bb3cd974b74a790292e1f36ffdca034928e0bca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-04Upgrade to thudScott Murray1-1/+1
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-11-29agl_raspberrypi3.inc: Add create-combined-dtbLeon Anavi1-1/+1
Include the recently added Yocto/OE recipe create-combined-dtb for combining dtb and dtbo to Raspberry Pi builds. Bug-AGL: SPEC-1775 Change-Id: I4bb91d9e5d7f6f5b8fe6a9371d85b93aa26bff1e Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-18agl_raspberrypi3.inc: WiFi on Raspberry Pi 3 B & B+Leon Anavi1-1/+1
Use linux-firmware-raspbian packages for bcm43430 and bcm43455. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ib634ee3351fa91d8d1704656f4a40d1b40cd05e3 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-08-06Reduce fixed memory split on RPi3Jan-Simon Möller1-1/+1
As it turns out, the driver uses cma and the fixed memory split is only needed at boot time before cma takes over or for the old driver. Thus we can safely reduce it down again as it does not help with the limited cma memory at all. Change-Id: Ibd5da5da931d02777e8d69543ce44e6b536402b1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-24Bump gpu memory on rpi3Jan-Simon Möller1-1/+1
This gives the gfx core some more head room. Change-Id: Ibff2aa3ed7fac1a3a199fa738cb47982ac56a298 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-10-14meta-agl-bsp: Enable WIC support for Raspberry Pi 2/3Tom Rini1-5/+13
In order to have WIC images be fully functional for both u-boot and non-u-boot we need to bring in more logic in determining what files will get mapped to what location. This is not found in meta-raspberrypi/pyro but is found in their master branch. These changes bring us in sync with meta-raspberrypi/conf/machine/include/rpi-base.inc as of their revision c26e9d3df54293a88fba047a29b335f52b01120e for Pi 2 and Pi 3. We do not attempt to bring in the additional logic they have to handle Pi 3-64 and U-Boot at this time as that is more invasive and not required for our use cases. Bug-AGL: SPEC-409 Change-Id: I642735a9be3daad96c0c1376cd6341b0697ffc09 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11207 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-09-08Upgrade to pyroChanghyeok Bae1-11/+0
u-boot: v2017.01 dlt-daemon: Remove gzipnative inheritance - gzipnative.bbclass is removed in pyro branch. - See ab0f46400c113c0d893be872727a67739d5e794d in poky. gpm: Remove bbappend file - upstream(meta-openembedded) is using git(v1.99.7) and this is not required anymore. gnutls: Remove bbappend file - The patch is already applied in upstream. agl-image-minimal: Remove ROOTFS_PKGMANAGE_BOOTSTRAP - ROOTFS_PKGMANAGE_BOOTSTRAP is removed in upstream. - Please see 529244ee212fe14019e35a5f163fab705ddbf141 in poky. freetype: Change hash value for v2.7.1 binary shadow: Remove shadow_%.bbappend - It's already applied upstream poky. Remove nativesdk-packagegroup-sdk-host.bbappend - It's already applied in upstream poky. faac: Remove bbappend file - It's already applied meta-openembedded upstream. pulseaudio: Change bbappend naming - Upstream yocto provides pulseaudio v10.0. weston: re-create patch to apply new version (v2.0.0) - Remove 0001-compositor-drm.c-Launch-without-input-devices.patch because it's already applied in new version. mesa: Remove 12.0.3 recipe and fix build error for qemux86-64 - Yocto upstream supports 17.0.2 and v12.0.3 is not required anymore in raspberrypi - Error: | configure: error: --enable-gallium-llvm selected but llvm-config is not found wayland-ivi-extension: Upgrade to latest master version - Due to weston upgrade, wayland-ivi-extension should be upgraded. packagegroup-ivi-common-core-multimedia: Remove alsa-lib - alsa-lib has empty package and it's not required anymore. Add agl-driver and agl-passenger in group and passwd - Parsing Error: agl-users: groupname agl-passenger does not have a static ID defined. poky-agl.conf: Change gstreamer default version to v1.10.x - Yocto upstream moves gstreamer to v1.10.4. af-main: Fix build error - Error: file /usr/local conflicts between attempted installs of af-main-1.0-r0.corei7_64 and base-files-3.0.14-r89.qemux86_64 intel-corei7-64: Change gstreamer-vaapi-1.0 name - gstreamer-vaapi-1.0 is moved to oe-core and its name is changed to gstreamer1.0-vaapi. linux-raspberrypi: Drop 4.4 bbappend - The upstream meta-raspberrypi doesn't support v4.4 anymore. - CVE patches are not required anymore. glibc: Remove bbappend - The bug-20116 is already applied in 2.25 cynara,security-manager: Fix build error - cynara: Replace bb.data to d - security-manager: Temporarily use 'no' in APPLY variable u-boot-ota: Add SRC_URI - In pyro, SRC_URI and S is moved from .inc to .bb linux-yocto: Remove 4.8 and 4.4 bbappend - Yocto 2.3 (Pyro) doesn't support v4.8 kernel anymore. - CVE patches in meta-agl-bsp are already applied in Yocto 2.3. tcf-agent: Remove bbappend file - This change is merged to upstream poky (pyro) bluez5: Remove recipe and add .bbappend - Yocto 2.3 (Pyro) already has same version. - bluetooth.conf file is added in .bbappend python-pycrypto: Remove recipe - meta-openembedded (Pyro) already has same version. meta-agl-bsp/classes/image.bbclass: Arrange for pyro - image.bbclass is taken from poky/meta/classes/image.bbclass and only changed IMAGE_TYPE_vm variable. libsoup: Fix native build error temporarily v2 (jsmoeller): meta-agl-bsp/meta-ti: - workaround patches in meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend - fix old python code in meta-ti/recipes-arago/ipumm-fw/ipumm-fw_3.00.13.00.bb - workaround patches in meta-ti/recipes-arago/weston/weston_%.bbappend - make specific to dra7xx-evm: -- meta-ti/recipes-bsp/alsa-state/alsa-state.bbappend -- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend -- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio/dra7xx-evm-set-default-sink-source.patch -- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend TODO/FIXME's in: - meta-agl-bsp/meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend - meta-agl-bsp/meta-ti/recipes-arago/weston/weston_%.bbappend - meta-agl-bsp/meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend - meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend Bug-AGL: SPEC-646 Change-Id: I4162ae887d3334e9102575e3724483aa25f4bd9c Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10457
2017-08-04raspberrypi: Fix U-Boot supportTom Rini1-1/+4
In order to use U-Boot on the raspberrypi3 we need to have the equivalent of the following commit from upstream meta-raspberrypi: commit 67e02164929a7d8cc187315aaaab60f6f3aaf422 Author: Paul Barker <paul@paulbarker.me.uk> Date: Mon Feb 13 23:32:43 2017 +0000 u-boot: Fix boot on rpi3 With that done, we can re-enable U-Boot support for raspberrypi3. With this done we can also now re-enable testing, so do so. For consistency we can now switch raspberrypi2 over to U-Boot as well. Change-Id: I9c96a66bf5644bf63f2566559ab7d9c4101b7a55 Bug-AGL: SPEC-409 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10491 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-07-05Fix for image format dependencies during parsingJan-Simon Möller1-1/+1
local.conf is evaluated first before the distro configuration. This caused issues while parsing the IMAGE_FSTYPES. The same set of IMAGE_FSTYPES did not throw the same switches deep in the other recipes. We define AGL_EXTRA_IMAGE_FSTYPES and AGL_EXTRA_INITRAMFS_FSTYPES for use in conf/local.conf or the device templates which are added early on-top of the defaults: AGL_DEFAULT_IMAGE_FSTYPES ?= "tar.xz ext4.xz" (tar.xz for direct use, ext4.xz for direct use and CI) AGL_DEFAULT_INITRAMFS_FSTYPES ?= "ext4.gz" (format for initramfs/initrd with smack labels) Both sets can be overridden in the device configuration / template. Device templates have been adapted accordingly. Bug-AGL: SPEC-492 Change-Id: I962ee8cc461b307b494d13ce3a3ebca154bebc86 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10047
2017-06-28Fix rpi-sdimg after IMAGE_FSTYPE being enforced in poky-agl.confJan-Simon Möller1-0/+5
This changeset fixes the case of the rpi-sdimg which was broken by the IMAGE_FSTYPE setting introduced in poky-agl.conf (distro-wide). A new variable AGL_EXTRA_IMAGE_FSTYPES is available now and only used in AGL (target) images. Reasoning for this solution: - any modifications to IMAGE_FSTYPES will also affect things like the initramfs or initrd images. - we minimized the disk-space requirements by reusing the ext4.xz for the rpi-sdimg Bug-AGL: SPEC-492 Change-Id: I07fd51dbcf334653cd6033b7ccb663c4d4ed8578 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9887 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-06-23agl_raspberrypi*.inc: Set KERNEL_IMAGETYPE to ImageLeon Anavi1-1/+1
Set KERNEL_IMAGETYPE to Image to ensure correct generation of kernel7.img and successful booting of AGL on Raspberry Pi 3 and 2 with output from the serial console. v2 (jsmoeller): Also adapt templates/machine/raspberrypi3/test/hwtest.short.environment v3 (jsmoeller): disable CI hwtests as rpi firmware is used Bug-AGL: SPEC-649 Bug-AGL: SPEC-650 Change-Id: If4335ffed7047fd2fbbf4bbd2dff54322cd0bf07 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9727 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Kevin Hilman <khilman@baylibre.com>
2017-06-09Enable SOTA for supported architecturesAnton Gerasimov1-0/+4
SOTA was temporarily disabled becaused it caused build errors Change-Id: I57f1704c3cacf08cda6cb6a0fa4ec1fe0df305f3 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9657 Reviewed-by: Martin Kelly <mkelly@xevo.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Changhyeok Bae <changhyeok.bae@gmail.com> Reviewed-by: Leon Anavi <leon.anavi@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-05-06raspberrypi3: change GPU_MEM to 255Matt Ranostay1-3/+2
Due to the patchset "drm/vc4: Verify at boot that CMA doesn't cross a 256MB boundary" the memory reserved for the GPU needs to be scaled back to 256MB Change-Id: I593de129b40dd6263816b506e23db543eec71348 Bug-AGL: SPEC-410 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9321 Reviewed-by: Changhyeok Bae <changhyeok.bae@lge.com> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-04-28Remove sota-related includes from meta-agl-bspAnton Gerasimov1-2/+0
Bug-AGL: SPEC-557 Change-Id: Id126559e4114b191c923477e7dd04147cb1ec770 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9257 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-04-27Enforce uImage as KERNEL_IMAGETYPE for rpiJan-Simon Möller1-0/+1
Currently we expect uImages (by default and in SOTA). Later kernels might default to Image. Thus set KERNEL_IMAGETYPE to uImage. Change-Id: I7995efb48cc2f9797d55b2ced5560dc1ea1e3a11 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9281
2017-04-25Change require to include to unbreak builds without ag-sota featureAnton Gerasimov1-1/+1
Bug-AGL: SPEC-557 Bug-AGL: SPEC-558 Change-Id: I06e9dfc28adef4be0fcbe104c9458395dc8efa1d Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9239 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-04-24Switch to meta-updaterAnton Gerasimov1-16/+2
Replace SOTA-related sections with includes, moved u-boot-ota common to minnowboard and qemu to meta-agl-bsp Change-Id: I0629a63154ff90bd712f621297b886505a2f462c Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9189 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-04-23Revert "Switch to meta-updater" - waiting for main commit to be updated.Jan-Simon Moeller1-2/+15
This reverts commit 521815fa95dba3d47704b62b4b6911fc994ad4c8. Change-Id: I06e2ed97e2ea7897ccdee09aeec277c8a75ccfa0 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9187
2017-04-23Switch to meta-updaterAnton Gerasimov1-15/+2
Replace SOTA-related sections with includes, moved u-boot-ota common to minnowboard and qemu to meta-agl-bsp Change-Id: I531f0eec07bab01610a225afc6d32a2f3a8156ad Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9095 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-04-04Add grub2 support in SOTAAnton Gerasimov1-0/+1
Change-Id: Ia37920f6190e9dfe68c4d63a01f204ff6fc66423 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2017-01-26Move feature code into the meta recipesRonan1-0/+46
* Having a minimlal local.conf serving the only purpose of user customization is the "Yocto" way of doing things * After a source synchronization (repo sync), feature code must be update without regenerate local.conf Change-Id: I0bb0861f4c07a8b57cb59a03f6ffe9d2d693cbbe Signed-off-by: Ronan <ronan.lemartret@iot.bzh>