Age | Commit message (Collapse) | Author | Files | Lines |
|
linux-firmware-rpidistro now requires acceptance of "synaptics-killswitch"
license, document it accordingly.
Bug-AGL: SPEC-4578
Change-Id: I2b7ffd3eb26e35b917ad1d0f6589f05010b71c99
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
The previous commit used an old file. Use the new generated version.
Bug-AGL: SPEC-4822
Change-Id: Ic1b7018ce2840332c0e051101ce854b90f96ecae
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28985
Tested-by: Jenkins Job builder account
|
|
Apply updates from running the new convert-variable-renames script
from upstream, plus a few manual tweaks to the sample BB_DISKMON_DIRS
configuration in the sample local.conf files to match the changes
made in upstream. There are a few things outside of BitBake variables
that the script still complains about that will need to be addressed
in follow up changes.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I65e483043c1f2e48827e735cf8fdaec8d04e5fee
|
|
The backport of the U-Boot 2021.07 recipe is no longer required
with the upgrade to meta-raspberrypi master.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Id00d6aaad805b7c4aff386b4e9d04dda2f1e241c
|
|
The latest revision (1.4) of raspberry pi 4B board can't be boot
by using current version of u-boot with showing "No partition
table" message. This can be related to the change of DMA hardware
on the new SoC (2711ZPKFSB06C0T) and we've confirmed upgrading
u-boot to newer version than 2021.04 which has several fixes
around Broadcom's DMA solves the issue. Also, we'd like to choice
2021.07 rather than 2021.04 since it's going to be supported for
longer in yocto project.
Bug-AGL: SPEC-4072
Signed-off-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com>
Change-Id: I7cbca889a93909e15ab04263c6d7d635a839bd56
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26624
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
|
|
This is mostly the result of running a slightly customized version
of the convert-overrides.py script from poky with additional
overrides added. A few minor fixups were done by hand afterwards
during a review of the changes.
The intent of these changes is to minimize the effort to keep the
"next" branch that builds against poky master up to date and tested
in preparation for the switch to the next Yocto LTS release in
early 2022.
Bug-AGL: SPEC-4052
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Rename bbappend for Xen support to work with 5.4 kernel.
- Drop one of the Xen support patches that no longer applies, as it
seems no longer required due to upstream changes.
- Move Xen kernel configuration fragment use to non-versioned kernel
bbappend to simplify future upgrades.
- Move ENABLE_UART definition to machine template inc files instead
of duplicating it in multiple bbappends. This is more in line with
how upstream indicates it be used.
Note that these changes have been compile tested with the agl-virt-xen
feature, but the resulting image has not yet been tested with Xen.
This is still an improvement, as agl-virt-xen would have silently not
affected kernel configuration previously. As well, some of the
reshuffling done here will simplify the kernel upgrade in the next
branch.
Bug-AGL: SPEC-3841
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I022cccef00fcd0a82ceef89d4aab1894004543a3
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26144
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The newer u-boot version supports the network interface on the rpi4,
allowing us to do things like DHCP boot.
Also switch to the preferred "rpi_arm64" u-boot config.
Bug-AGL: SPEC-2983
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Change-Id: I0dff4779f98c7ce6394efd9feb58b7f2a8933296
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25937
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Now that the failure in create-combined-dtb has been resolved (by
patching dtc), we can unpin the version of linux-raspberrypi and use the
5.4 kernel series.
Bug-AGL: SPEC-3702
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Change-Id: I0da4eb7ccd17d816477d28864185278084abd9b4
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25840
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The uprev to YP 'dunfell' 3.1.4 would change the default kernel used by the pi4.
This has an effect on the DTBo's used for booting and in CI.
One effect is that create-combined-dtb won't no longer build.
Also we might have to change away from fkms on kernel 5.4 .
Bug-AGL: SPEC-3702
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: If7353c1b9fde4ef4fe6456ce969a37e2734c5a79
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25716
|
|
Added the support for DOM0 in raspberry pi4. The feature agl-virt-xen should be enabled to activate this code.
1512 MB of memory is used for DOM0 machine.
There are limitations:
- brcmfmac module disabled (bluethooth and Wifi) due to the crash
- total_memory is set to the 3Gb, as it impacts the USB ports on rasbperry pi4 on Linux kernel 4.19
v2 (jsmoeller): make changes in virtualization-layer conditional to raspberrypi4
Bug-AGL: SPEC-3259
Change-Id: I873fbf1f5498e31ae5f468407502f16e1873f7fc
Signed-off-by: Leonid Lazarev <leonid.lazarev@mera.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24522
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Update the templates to use the updated flags and configuration present in
meta-raspberrypi.
The previous template did not properly pull-in the u-boot fragments for the RPI4.
v4: the MACHINE in the AGL template for the RPI4 is now
'raspberrypi4-64' as in upstream.
CI will get support-patches through releng-scripts.
Bug-AGL: SPEC-3368
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: Ia2acb54516464d433c64adfc7ba832ccfdf899c3
|