summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/conf/include
AgeCommit message (Collapse)AuthorFilesLines
2023-11-03Fixup folder change in meta-ti-bspJan-Simon Moeller3-0/+12
Meta-ti-bsp breaks expectations of the output folder in its layer.conf Enforce the usual folder structure. Bug-AGL: SPEC-4957 Change-Id: Ie887e83015dcb9be609289442840b131cbad1b32 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29360
2023-09-11Restructure Salvator-x .inc filesHau Vo6-41/+27
This commit restructure the .inc files relate to H3/M3 Salvator-x boards. Bug-AGL: SPEC-4808 Signed-off-by: Hau Vo <hau.vo.ra@renesas.com> Change-Id: I9e01f61f75010c1cbf54feec30422855b43cf051 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29175 Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account (cherry picked from commit 979598c6e9b855cec0ff56c95eae0d47e9c0e21a) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29201
2023-06-05Use new weston-ini-conf scheme and remove old per-machine filesJan-Simon Moeller1-0/+3
The previous commit used an old file. Use the new generated version. Bug-AGL: SPEC-4822 Change-Id: Ic1b7018ce2840332c0e051101ce854b90f96ecae Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28985 Tested-by: Jenkins Job builder account
2023-05-30Fix up i.MX8MQ EVK configurationScott Murray3-27/+30
Changes: - Since linux-fslc-lts does not boot on the EVK at the moment, and both it and linux-fslc still do not have support for the HDMI output, switch back to using linux-fslc-imx with tweaks to use etnaviv as we did pre-kirkstone. - A bbappend has been added for linux-fslc-lts since that was missed in a previous upgrade, and even though we are not using it now, it is possibly useful for other i.MX variants. - A machine template for using the NXP BSP with the Vivante GPU driver, imx8mq-evk-viv, has been restored, as testing shows it now works with the current panel-less homescreens. As before, the intent of this configuration is for testing or as an example of potential production use of meta-freescale where NXP support is available. - Start up of Bluetooth support has been disabled, as it currently causes kernel oopses or panics (both have been seen in testing). This happens with both machine templates. SPEC-4807 has been opened to track this issue. Bug-AGL: SPEC-4799 Change-Id: I38e4e720643714541efb0fed08d5ab64545bb02d Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28925 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-05-05[R-CAR] meta-agl-bsp: correct vspm-if package nameHarunobu Kurokawa3-3/+3
kernel-module-vspmif package name is no longer used. We should correct kernel-module-vspm-if in these files. Bug-AGL: SPEC-4780 Change-Id: I782319295fa0607a97971188a0322398a187b680 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28782 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> ci-image-build: Jenkins Job builder account Tested-by: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2023-05-05meta-agl-bsp: Use pixman renderer on qemuarm/qemuarm64Hiroyuki Ishii2-0/+6
Using GL-renderer on qemu without any acceleration support such as kvm results pretty much higher cpu consumption. To avoid it, we'll use pixman-renderer on qemuarm and qemuarn64. Bug-AGL: SPEC-4165 Signed-off-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com> Change-Id: Iaffe1bd624d6f1c6df9af67e33cc1fa2168293ac Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27066 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-05-03agl_bbe.inc: remove old graphics preferencesDenys Dmytriyenko1-20/+0
Latest TI graphics completely redone its dependencies and preferences to be aligned with upstream and use Mesa packages as proper providers for GBM, EGL, GLES, etc. components. There's no more need for local workarounds to adjust graphics settings. Note: SGX is currently set in meta-ti-bsp to fall back to software rendering and will be fixed later. Rogue in newer K3 devices is fully functioning though. Bug-AGL: SPEC-4723 Change-Id: I072a5e25bdbb444db8e7d4b87a1f181c349240ea Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28744 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Scott Murray <scott.murray@konsulko.com> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-05-03agl_beaglebone.inc: remove old graphics preferencesDenys Dmytriyenko1-21/+0
Latest TI graphics completely redone its dependencies and preferences to be aligned with upstream and use Mesa packages as proper providers for GBM, EGL, GLES, etc. components. There's no more need for local workarounds to adjust graphics settings. Note: SGX is currently set in meta-ti-bsp to fall back to software rendering and will be fixed later. Rogue in newer K3 devices is fully functioning though. Bug-AGL: SPEC-4723 Change-Id: Ifb6f594c6203924aa1b90f421d475b716c61a796 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28743 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account
2023-04-25Convert AGLCI into AGL_FEATUREJan-Simon Moeller1-1/+1
Use AGL_FEATURES instead of DISTRO_FEATURES. Change-Id: I9a866a4b921e2816613784768c60b874da28a16c Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28681 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2023-01-29meta-agl-bsp: make meta-rcar-gen3 BBMASKs more specificScott Murray2-3/+3
Update the BBMASK definitions for the rcar3 platforms in meta-agl-bsp to include the meta-renesas/ component of the path so that they will not mask out any of our files under meta-agl-bsp/meta-rcar-gen3. Bug-AGL: SPEC-4618 Change-Id: I6434f54bb50784c0673b54648165e0c5118f0c7e Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit b5001a4a5abbe8e7944446025dd63be725c491e4) Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28418 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-11-23meta-agl-bsp: Add overrides to rcar3 BSP changesScott Murray3-26/+24
The various configuration changes done by the include files for the rcar3 machines in meta-agl-bsp prove problematic when using a rcar3 machine in a multiconfig configuration with different machines in other configs. This can potentially be avoided in the future with a significant rework of the local.conf generation in aglsetup.sh, but for now, too avoid issues, add rcar-gen3 or h3ulcb overrides to the variable changes in those files. That ensures that the changes will only apply to the specific machine being targeted. So far this has only been tested with the h3ulcb, it is likely that more fixes are required for other rcar3 machines, as well as the machines from other BSPs. Bug-AGL: SPEC-4618 Change-Id: Ifa6735337e673a92c56d5457b97d09a5b86cc0e1 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28185 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-08-05Revert "meta-rcar-gen3: workaround recipe incompatibilities with YP 4.0.2"Ronan Le Martret1-7/+0
This reverts commit d60a670349027852e93d006114b82a82cff5f27a. Bug-AGL: SPEC-4517 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I2c8cffa37a99cefa80510998aae1920231006090 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27867 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-07-29meta-agl-bsp: Pin i.MX platform kernels to 5.15 LTSScott Murray3-2/+10
The recent bump of meta-freescale with the kirkstone 4.0.2 upgrade brought an upgrade to 5.18 in the linux-fslc kernel, which breaks sllin compilation. Tweak the i.MX6 and i.MX8 machine templates to use the 5.15 linux-fslc-lts kernel, which matches linux-yocto in poky and seems a better choice going forward with kirkstone. Bug-AGL: SPEC-4501 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ib75d8c844301c5ac902e18d02ff8ac6176f614c7 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27842 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-07-13meta-rcar-gen3: workaround recipe incompatibilities with YP 4.0.2Scott Murray1-0/+7
This adds a workaround for the strictly versioned gstreamer bbappends until the BSP gets updated to be compatible with 4.0.2. Bug-AGL: SPEC-4473 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ie25b18779ac6fdb3efd9102317955342bd8e58af Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27766 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-07-11Machine cleanup for Nifty NeedlefishScott Murray4-15/+0
Remove machine templates and associated files for: - hsdk - dragonboard-410c - dragonboard-820c - nitrogen6x Bug-AGL: SPEC-4402 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I7ff2665fe5ceef55454905d57e7793d5fcf0ef8a Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27701 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-05-26agl_m3-salvator-x-nogfx.inc:duerpei1-0/+11
Masking out the weston_%.bbappend In patch 27430, may have forgotten to modify this file. Bug-AGL: SPEC-4389 Signed-off-by: duerpei <duep.fnst@fujitsu.com> Change-Id: I9b451f236613c7e9efba158713723051b10b489b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27502 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-05-03meta-agl-bsp: fix building weston for rcar3 nogfx machinesScott Murray3-7/+34
Work around use of obsolete Weston backend-fbdev in meta-rcar-gen3 when building without the proprietary driver stack. Masking out the weston_%.bbappend seems the simplest approach for now, as forcing USE_GLES = "1" to disable the adding of -Dbackend-default="fbdev" to EXTRA_OEMESON triggers adding "libgbm" to DEPENDS, which breaks due to that being a component specific to the proprietary stack we are explicitly disabling. If the "libgbm" usage in the bbappend was instead "virtual/libgbm" as is now used in poky, it might be possible to just tweak PREFERRED_PROVIDER_virtual/libgbm = "mesa". Bug-AGL: SPEC-4343 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I603a9c4744befb97513808714cedd3e21664525f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27430 ci-image-build: Jenkins Job builder account Reviewed-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-05-03meta-agl-bsp: fix rcar3 packaging errorsScott Murray1-0/+10
Provide a default value of PACKAGE_ARCH for the packagegroup packagegroup-multimedia-libs from meta-rcar-gen3 to avoids errors from a new packaging QA check with respect to packagegroups depending on versioned library packages needing to be machine-specific. Note that this needs to be done in global configuration space as opposed to in a bbappend because the value needs to be set before the packagegroup bbclass is inherited. This can be removed when upstream is fixed to add the required PACKAGE_ARCH = "${MACHINE_ARCH}". Bug-AGL: SPEC-4343 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I60dc1fbb976c7e08b174017268949dc43d6d17fe Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27429 Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-05-03meta-agl-bsp: avoid meta-gnome dependency from meta-rcar-gen3Scott Murray1-0/+3
The kirkstone-dev_3.5_M3_v5.9.0 branch of meta-renesas contains a new bbappend for cogl which requires meta-gnome. Since nothing in the BSP layer itself depends on cogl, and there is currently no obvious usecase for cogl outside of GNOME desktop related libraries, BBMASK out the bbappend so we do not need to pull in meta-gnome. This can be revisited if an AGL member presents a need for cogl on rcar3 in their downstream use of AGL. Ideally, upstream will move the bbappend to a dynamic layer directory to remove the issue. Bug-AGL: SPEC-4343 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I6e55c07d1ff1fd7d68d1798ecca3c9c1b35cdf14 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27428 Reviewed-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-05-03[RCAR] Add some new var conf for poky kirkstoneRonan Le Martret1-0/+6
Bug-AGL: SPEC-4343 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I0e7f9dfbd18f1c2ec99b96c3a9afad57a424e6c9 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27425 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2022-04-11meta-agl-bsp: Update J7 EVM support for KirkstoneScott Murray2-15/+7
Changes: - Rename machine template and related files to use j721e-evm instead of j7-evm to match meta-ti change. - Update machine template to point into new meta-ti-bsp layer in the meta-ti repository. - Drop local multiconfig TMPDIR tweak as it seems unrequired now, and is triggering a build failure around sysroot population that needs further investigation. It may be added back in the future if the single TMPDIR again proves to have issues. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I8c2717bb749735cfe36d86b48e3c61b1cca990e4
2022-04-11meta-agl-bsp: Update Beaglebone support for KirkstoneScott Murray1-29/+16
Changes: - Update machine template to point into new meta-ti-bsp layer in the meta-ti repository, and update the dynamic layer directory name to match. - meta-ti currently does not have Weston 10.0.0 support, and testing confirms it will not build against the currently provided version of the SGX GPU driver, so disable using it for now. - Even though the GPU driver is not being used ATM, the local patch for ti-sgx-ddk-km to handle AGL toolchain naming has been updated to ease testing meta-ti updates down the road. - The Weston bbappend that had been based on meta-arago's has been removed for now. A re-evaluation of what is needed locally will need to be done when TI have their Weston 10.0.0 support settled. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ie61cef722a643791970214710835423a21696694
2022-04-03meta-agl-bsp: Update i.MX8MQ EVK support for kirkstoneScott Murray4-26/+25
Changes: - Rename machine template and related files to use imx8mq-evk instead of imx8mqevk to match meta-freescale change. - Switch to purely using the default "mainline" BSP configuration in meta-freescale for imx8mq-evk as opposed to the tweaking of the "nxp" configuration previously used. The mainline configuration now builds a working image, and this lowers maintenance on our part. - Remove imx8mqevk-viv configuration to build with Vivante GPU driver. NXP have not yet released Weston 10 support, and at this point the etnaviv driver is stable. If a demonstration of support of Vivante is requested in the future (e.g. for other i.MX8 variants that still require it), this can be revisited. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I7e279268463f68978ecd2990927aab6d64e3cbd2
2022-03-30Update for kirkstone variable renamesScott Murray4-5/+5
Apply updates from running the new convert-variable-renames script from upstream, plus a few manual tweaks to the sample BB_DISKMON_DIRS configuration in the sample local.conf files to match the changes made in upstream. There are a few things outside of BitBake variables that the script still complains about that will need to be addressed in follow up changes. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I65e483043c1f2e48827e735cf8fdaec8d04e5fee
2022-03-30meta-agl-bsp: remove Raspberry Pi U-Boot backportScott Murray1-4/+0
The backport of the U-Boot 2021.07 recipe is no longer required with the upgrade to meta-raspberrypi master. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Id00d6aaad805b7c4aff386b4e9d04dda2f1e241c
2022-02-15meta-agl-bsp: BBMASK out rcar3 base-files and systemd modificationsScott Murray1-0/+4
To avoid breaking changes to systemd-tmpfiles' default behavior, disable the base-files and systemd bbappends in meta-rcar-gen3 with BBMASK. The changes in the BSP seem aimed at fixing an issue with a particular NFS root configuration that does not apply to upstream AGL, and break the documented expected behavior of systemd-tmpfiles with respect to configuring files/directories under /var/volatile. Additionally, this potentially improves shared state reuse across aarch64 machine builds. Bug-AGL: SPEC-4256 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I03807d2190a963f8cdf303d07f00fc1c099d230e Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27200 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-10-29meta-agl-bsp: reference hardware updates for BSP v5.5.0Scott Murray1-3/+3
Update the AGL reference hardware devicetree and U-Boot configuration names to work with the Renesas BSP v5.5.0 update and related meta-agl-refhw changes. Bug-AGL: SPEC-4103 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I94b8fc1b4e0d3b1b12e3b550af6d618464d91ac7 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26725 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-10-29[RCAR] Update RCAR BSP recipes to 5.5.0 versionRonan Le Martret6-7/+8
* rename the dts/dtsi file, the new BSP 5.5.0 change the file name of the dts file. * update the driver files hash * Add "meta-yocto-bsp" to BBLAYERS, it's new dependency of meta-renesas. Bug-AGL: SPEC-4081 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I53b71906e7174d7b1153a6912f7181171730147c Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26703 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Scott Murray <scott.murray@konsulko.com> Reviewed-by: Stephane Desneux <stephane.desneux@iot.bzh> Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2021-09-22raspberrypi: Upgrade to u-boot v2021.07 for latest 4B boardsHiroyuki Ishii1-2/+2
The latest revision (1.4) of raspberry pi 4B board can't be boot by using current version of u-boot with showing "No partition table" message. This can be related to the change of DMA hardware on the new SoC (2711ZPKFSB06C0T) and we've confirmed upgrading u-boot to newer version than 2021.04 which has several fixes around Broadcom's DMA solves the issue. Also, we'd like to choice 2021.07 rather than 2021.04 since it's going to be supported for longer in yocto project. Bug-AGL: SPEC-4072 Signed-off-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com> Change-Id: I7cbca889a93909e15ab04263c6d7d635a839bd56 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26624 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Scott Murray <scott.murray@konsulko.com>
2021-09-16meta-agl-bsp: Add reference hardware WLAN card supportScott Murray1-0/+7
Add the required firmware for the reference hardware WLAN card to MACHINE_EXTRA_RRECOMMENDS in the agl-refhw-h3 feature include file. Bug-AGL: SPEC-4071 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Iabcff16e56bd676bb3dd237b15c6cb2fa40ba97a Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26636 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-09-16meta-agl-bsp: fix a couple of override syntax misconversionsScott Murray2-2/+2
There were a couple of misconversions from the override syntax conversion script still lurking in the i.MX8MQ EVK machine include files, fix them. Bug-AGL: SPEC-4052 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia441bb46cc29530d3909faf7385adca633fc3db2 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26658 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-08-23Convert to new override syntaxScott Murray27-107/+107
This is mostly the result of running a slightly customized version of the convert-overrides.py script from poky with additional overrides added. A few minor fixups were done by hand afterwards during a review of the changes. The intent of these changes is to minimize the effort to keep the "next" branch that builds against poky master up to date and tested in preparation for the switch to the next Yocto LTS release in early 2022. Bug-AGL: SPEC-4052 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-07-13meta-agl-bsp: Enable building agl-refhw-h3 firmwareScott Murray1-4/+3
Changes: - Replace the agl-refhw-h3 addition to MACHINEOVERRIDES with just using AGL_FEATURES. With the rework of the arm-trusted-firmware bbappend in meta-agl-refhw, the override is no longer necessary, and a feature in AGL_FEATURES makes more sense in the context of this not being a separate machine in the AGL build, but just a feature. - Remove BBMASK so the arm-trusted-firmware bbappend from meta-agl-refhw-gen3 will now be picked up. - Hook up building the U-Boot variant for the refhw by extending UBOOT_CONFIG. - Remove the compatible machine declaration from gpsd-conf-refhw, as we're using the package in h3ulcb images anyways. Bug-AGL: SPEC-3916 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ibe3ecdbe74811793c0e030df28a64b3052d64f47 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26476 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-23rcar3: move extra kernel modules to MACHINE_EXTRA_RRECOMMENDSScott Murray1-1/+3
The appending of the rcar3 graphics related kernel modules to IMAGE_INSTALL in agl_rcar.inc is problematic for users building headless or container targetted images. To avoid this, instead append them to MACHINE_EXTRA_RRECOMMENDS, which will result in them being pulled in via packagegroup-machine-base. Users not desiring them can then either disable package recommendations or not pull in packagegroup-machine-base. In practice, this has no effect on any of the current images in meta-agl-core or meta-agl-demo, but it is required for the IC EG guest container build for rcar3 platforms. Bug-AGL: SPEC-3983 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I309926b6dc31614fb7c710b0a302716942d07df8 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26430 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-16Remove Raspberry Pi 3 supportScott Murray1-30/+0
The raspberrypi3 machine template had only been retained to allow anyone interested in using one with a telematics or cluster demo image build to do so. At this point the Pi 4 has been out long enough that that seems no longer necessary, so removing the support to avoid confusion and reduce clutter seems warranted. Bug-AGL: SPEC-3985 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ib3770ba03771aff468f94d5bf6f2910fc01f7ee0 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26429 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-01Add initial j7-evm machine supportScott Murray1-0/+15
Add template and inc file for requested j7-evm machine. Notes: - The various images have been test built, including the agl-demo-platform image. No runtime testing has been done due to lack of hardware. - The proprietary SGX graphics support has not been enabled. This is due to both being unable to test, and it being unclear if it is required given the telematics usecases mentioned with respect to the hardware. - The shared TMPDIR for the non-optional multiconfig for building the bootloader has been shifted to a split one, as failures were reproducibly being seen when using the rm_work bbclass, and in general the community recommendation is to not share them. This does mean that cleaning up a build tree requires removing the tmp-k3r5 directory in addition to tmp. Bug-AGL: SPEC-3928 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I5c4e325b0b709b6571946475bf128bc25b171f6e Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26379 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-01Remove dra7xx-evm machine supportScott Murray1-42/+0
Remove dra7xx-evm machine template and related BSP configuration tweaks. The configuration is stale and untested, and no one has expressed interest in it for long enough that it seems better to just remove it to avoid confusion about support status. Bug-AGL: SPEC-3934 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I1659eef113cf1e6fcfdddf65f712275b8fc49b6f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26378 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-01Update i.MX machine configurationsScott Murray6-69/+32
Changes: - Add new i.MX and i.MX6 common inc files and shift duplicated configuration to them. - Switch to using the newer IMX_BSP_DEFAULT variable mechanism for selecting mainline vs NXP bits, instead of adding use-mainline-bsp to MACHINEOVERRIDES. - Remove the accidental addition of agl-medium-arm-compiler to DISTRO_FEATURES for the imx8mqevk configurations. - Remove some other stale variable definitions. - Update BSP layer path in i.MX6 template 50_setup.sh files, these were missed on a previous update. Bug-AGL: SPEC-3933 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I0145e3c8b73b4d53706fda4237ab10f181fd16f7 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26377 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-15meta-agl-bsp: add pseudo abort workaround for rcar3 buildsScott Murray1-1/+31
Add workaround to avoid pseudo aborts triggered by the rcar3 kernel module recipes writing to KERNELSRC in do_install, errors are of the form (from pseudo.log): path mismatch [27 links]: ino 19366408 db 'NAMELESS FILE' req 'build/tmp/work-shared/h3ulcb/kernel-source/include'. See the commit messages in poky commits 4e7c211 and 3b7f2c6 and the wiki page at: https://wiki.yoctoproject.org/wiki/Pseudo_Abort for details on the pseudo behavior change. These can potentially be moved to the recipes in the BSP, or removed if the recipes are changed to shift the module headers and symbols to their dev packages. Bug-AGL: SPEC-3840 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ic872e1cec1ccbd37a5a53d146119fa5053b85482 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26147 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-15Revert "meta-renesas: workaround recipe incompatibilities with YP 3.1.4"Ronan Le Martret1-4/+0
Bug-AGL: SPEC-3804 This reverts commit 8b4612385bbf4cdf523c9b731ed73c7887995372. Change-Id: I4a70f1cc57bf2265846b3a208b74c46a786ec622 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26050 Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-09meta-agl-bsp: clean up Raspberry Pi Xen supportScott Murray2-0/+6
Changes: - Rename bbappend for Xen support to work with 5.4 kernel. - Drop one of the Xen support patches that no longer applies, as it seems no longer required due to upstream changes. - Move Xen kernel configuration fragment use to non-versioned kernel bbappend to simplify future upgrades. - Move ENABLE_UART definition to machine template inc files instead of duplicating it in multiple bbappends. This is more in line with how upstream indicates it be used. Note that these changes have been compile tested with the agl-virt-xen feature, but the resulting image has not yet been tested with Xen. This is still an improvement, as agl-virt-xen would have silently not affected kernel configuration previously. As well, some of the reshuffling done here will simplify the kernel upgrade in the next branch. Bug-AGL: SPEC-3841 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I022cccef00fcd0a82ceef89d4aab1894004543a3 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26144 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-02-16meta-agl-bsp: Fix agl-refhw-h3 BBMASK definitionScott Murray1-1/+1
Use += with BBMASK definition to avoid over-writing other additions. Bug-AGL: SPEC-3798 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: If6d5850e7dc07de56c2a6737634f0c0935ec2030 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26040 Reviewed-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Tested-by: Jenkins Job builder account
2021-01-26Allow -nogfx boards to start the homescreenJan-Simon Moeller3-0/+12
This allows to produce working images without restricted licenses. Software rendering will be slow and screen updates take a while. v2: adapted to use WESTON_USE_PIXMAN Bug-AGL: SPEC-3774 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iaea1985da48985dfe223471a86b04d8921cc8d7a Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25933 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2021-01-26qemu[arm,arm64]: enable runqemu in graphic modeJan-Simon Moeller2-16/+19
This adds the necessary flags to launch runqemu for the qemuarm target with the full graphical agl-demo-platform image. Slow but working. Bug-AGL: SPEC-3764 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iffc2158e53d775d578b1d4ee0e94d3fd68e2a028 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25930 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Scott Murray <scott.murray@konsulko.com>
2021-01-26raspberrypi: Upgrade to u-boot v2020.10Paul Barker1-0/+4
The newer u-boot version supports the network interface on the rpi4, allowing us to do things like DHCP boot. Also switch to the preferred "rpi_arm64" u-boot config. Bug-AGL: SPEC-2983 Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: I0dff4779f98c7ce6394efd9feb58b7f2a8933296 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25937 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-19raspberrypi: agl_raspberrypi4.inc: Unpin kernel versionPaul Barker1-3/+0
Now that the failure in create-combined-dtb has been resolved (by patching dtc), we can unpin the version of linux-raspberrypi and use the 5.4 kernel series. Bug-AGL: SPEC-3702 Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: I0da4eb7ccd17d816477d28864185278084abd9b4 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25840 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-16meta-agl-bsp, templates: Add virtio-aarch64 machineVasyl Vavrychuk1-0/+14
This machine is intended to run in ARMv8 virtualized environment that provides VirtIO devices. AGL machine configuration files are based on qemuarm64 machine from meta-agl branch master commit e1da0efcd2eece82b0326798cfeaeb8dd48797fc. Yocto machine configuration files are based on qemuarm64 machine from Poky branch dunfell commit 4e931b1d05018923dc145cd97f6f965f5cb6e1a5. Yocto Linux Kernel is used as recommended in [1]. Its metadata for the created machine are based on qemuarm64-standard.scc from yocto-kernel-cache branch yocto-5.4 commit 4aeda12f7f7eb84613ae1fe6e22cd9cd9790c20b. The rationale behind creating new machine is a wish to have a machine that could run on other hypervisor/virtual machine monitor that implements VirtIO, not necessary QEMU. For now, virtio-aarch64 machine runs under QEMU and OpenSynergy COQOS Hypervisor. virtio-aarch64 machine includes following changes comparing to qemuarm64: * use virtio-gpu instead of VGA display (to be upstreamed to work in conjunction with runqemu gl, sdl, etc. options) * use virtio-bus instead of PCI bus QEMU devices * remove unneeded configurations Changes are moved here from meta-agl-devel. [1]: https://www.yoctoproject.org/docs/3.1.2/bsp-guide/bsp-guide.html#released-bsp-recommendations Bug-AGL: SPEC-3668 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Change-Id: I653ca35fded3d3e38f25299f46629db1174b5008 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25915 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-08meta-agl-bsp: enable HCI UART for i.MX8MQ EVKScott Murray1-0/+3
Changes: - Remove explicit "not set" options in btusb.cfg kernel configuration fragment to avoid over-riding BSP configuration. - Add helper script and systemd unit to detect HCI UART device on i.MX8MQ EVK and EVKB and run hciattach as necessary. While logic has been added for the QCA6174 on the i.MX8MQ EVK, note that it has not been tested due to lack of hardware availability to test. Bug-AGL: SPEC-3545, SPEC-3681 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Iae3a58ccfbdb31698ae012ab7d03c9259ac83013 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25842 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2021-01-06meta-agl-bsp: add kernel-devicetree to nogfx rcar3 imagesScott Murray2-1/+4
Shift the IMAGE_INSTALL_append of the kernel-devicetree package to agl_rcar-nogfx.inc so that it will be added to the *ulcb-nogfx images in addition to the *uclb images. This fixes booting the nogfx images from SD cards created with the wic.xz image. Bug-AGL: SPEC-3754 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: If4868326f50e45046fcce7b5d6ba43f13f746ec1 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25866 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-16templates: qemuriscv64: Initial commit of qemuriscv64 machineAlistair Francis1-0/+11
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Change-Id: I50a966dcbe051ae5369e28291e5bb62cd40267b9 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25105 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>