aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/conf/machine
AgeCommit message (Collapse)AuthorFilesLines
2021-01-16meta-agl-bsp, templates: Add virtio-aarch64 machineVasyl Vavrychuk2-0/+59
This machine is intended to run in ARMv8 virtualized environment that provides VirtIO devices. AGL machine configuration files are based on qemuarm64 machine from meta-agl branch master commit e1da0efcd2eece82b0326798cfeaeb8dd48797fc. Yocto machine configuration files are based on qemuarm64 machine from Poky branch dunfell commit 4e931b1d05018923dc145cd97f6f965f5cb6e1a5. Yocto Linux Kernel is used as recommended in [1]. Its metadata for the created machine are based on qemuarm64-standard.scc from yocto-kernel-cache branch yocto-5.4 commit 4aeda12f7f7eb84613ae1fe6e22cd9cd9790c20b. The rationale behind creating new machine is a wish to have a machine that could run on other hypervisor/virtual machine monitor that implements VirtIO, not necessary QEMU. For now, virtio-aarch64 machine runs under QEMU and OpenSynergy COQOS Hypervisor. virtio-aarch64 machine includes following changes comparing to qemuarm64: * use virtio-gpu instead of VGA display (to be upstreamed to work in conjunction with runqemu gl, sdl, etc. options) * use virtio-bus instead of PCI bus QEMU devices * remove unneeded configurations Changes are moved here from meta-agl-devel. [1]: https://www.yoctoproject.org/docs/3.1.2/bsp-guide/bsp-guide.html#released-bsp-recommendations Bug-AGL: SPEC-3668 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Change-Id: I653ca35fded3d3e38f25299f46629db1174b5008 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25915 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-09-30Remove overlay for qemuarm.confJan-Simon Moeller1-18/+0
Upstream uses now a matching machine definition. Remove our overlay. Bug-AGL: SPEC-3613 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I142de72a8a2f7b978f53e976f6b86be226c1a178 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25358 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-05-12Update Raspberry Pi (3/4) templates to match meta-raspberrypi configurationJan-Simon Möller2-162/+0
Update the templates to use the updated flags and configuration present in meta-raspberrypi. The previous template did not properly pull-in the u-boot fragments for the RPI4. v4: the MACHINE in the AGL template for the RPI4 is now 'raspberrypi4-64' as in upstream. CI will get support-patches through releng-scripts. Bug-AGL: SPEC-3368 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Ia2acb54516464d433c64adfc7ba832ccfdf899c3
2020-02-26rpi4-base.inc: KERNEL_DEVICETREE for rpi4 and sotaLeon Anavi1-0/+4
Use different dtb and dtbo files for Raspberry Pi 4 when agl-sota is enabled. This modification is required for successfully building a kernel because in AGL machine raspberrypi4 is for 64-bit image and in class sota_raspberrypi layer meta-updater the same machine name is targeting 32-bit image. Bug-AGL: SPEC-3130 Change-Id: I5fd4bccfe605fea4e14499183279032a8bf0562e Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-19raspberrypi4.conf: Enable BluetoothLeon Anavi1-0/+1
Enable Bluetooth for 64-bit AGL images for Raspberry Pi through recipe pi-bluetooth. It provides a script that starts automatically and properly configures BT-HCI. Bug-AGL: SPEC-2936 Change-Id: I01cd5ea446bfe5f4182284c5e88984ee054fe62f Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-19conf/machine/raspberrypi4: Switch to 64-bitLeon Anavi2-13/+144
Switch from 32-bit to 64-bit AGL image for Raspberry Pi 4. Machine configuration has been modified according to the existing configurations from meta-raspberrypi branches master and zeus. When AGL moves to a newer release of the Yocto project and the BSP these configurations can be removed from meta-agl. Bug-AGL: SPEC-2936 Change-Id: Iddc3f75be179797e7d56f6806ec6ba52b080d766 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-09-26raspberrypi4: Fix BluetoothLeon Anavi1-0/+1
Include recipe pi-bluetooth in the Raspberry Pi 4 images to enable Bluetooth. This recipe provides a script that starts automatically and properly configures BT-HCI. The same script is used in Raspbian. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Id650cb2f61ee63196cbd826e4a9dd73488b298c3
2019-07-24raspberrypi4.conf: Add machine definitionLeon Anavi1-0/+25
Add a new machine definition for Raspberry Pi 4 because it is not present in branch thud of meta-raspberrypi. This machine definition is taken from the master branch of the upstream of Yocto/OE layer meta-raspberrypi. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I368f6c7107ca023da66ce60d2006984f8939cf00
2019-04-04Upgrade to thudScott Murray1-1/+1
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-08-16Add machine templates for qemuarm and qemuarm64Jan-Simon Möller1-0/+18
This changeset adds the necessary tepmlates to build the qemu targets for ARM 32bit and 64bit. The MACHINE names are 'qemuarm' and 'qemuarm64'. As the compiler flags for qemuarm in Yocto are using the equivalent of armv5te, we need to ship our own machine/qemuarm.conf with our default tuning for armv7-a (YP name armv7ve), and overrides to build a v7 kernel and use a v7 capable QEMU machine. For qemuarm64, some additional kernel configuration is enabled to allow building and loading of the MOST drivers. Bug-AGL: SPEC-756 Change-Id: I0a688a1d61a75f1287902fc2733a8a54b0485a34 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com>