summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/conf
AgeCommit message (Collapse)AuthorFilesLines
2019-02-28Fix the build failed (do_rootfs) for RPi3-64, guppy_7.0.0genesis1-1/+1
When building for RPi3-64, there will have an error at do_rootfs. The error messages are: nothing provides linux-firmware-bcm43430 needed by linux-firmware-1:0.0+git0+8fc2d4e556-r0.noarch This is happened because RPi3 change to use linux-firmware-raspbian, but doesn't change config about RPi3-64 Change-Id: I4b1881f63e8fffca08d8edc32f19b057fbc0c637 Signed-off-by: Che-Hao, Liu <genesisgardian@gmail.com>
2018-11-30Enable agl-sota for h3ulcbAnton Gerasimov4-1/+10
Change-Id: I3c2d0df6e3afd4aa0671261f7d143ac15d88a836 Signed-off-by: Anton Gerasimov <tossel@gmail.com>
2018-11-29agl_raspberrypi3.inc: Add create-combined-dtbLeon Anavi1-1/+1
Include the recently added Yocto/OE recipe create-combined-dtb for combining dtb and dtbo to Raspberry Pi builds. Bug-AGL: SPEC-1775 Change-Id: I4bb91d9e5d7f6f5b8fe6a9371d85b93aa26bff1e Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-14dragonboard-410c: change init sequence of the qcom kernel moduleYuya Ono1-1/+2
Since db410c's DSP is enabled from the rocko branch, an error occurs at boot time. This patch is workaround by change init sequence of kernel module on booted with reference to the following discussion. (https://lkml.org/lkml/2018/10/31/440) Change-Id: I5e1b94a7b17889610b3beecccd3e99f4bc445226 Signed-off-by: Yuya Ono <Ono.Yuya@ap.MitsubishiElectric.co.jp>
2018-11-07Latest meta-altera supports wic IMAGE_FSTYPEJan-Simon Möller1-1/+1
In preparation of the layer uprev, fix the IMAGE_FSTYPE. Change-Id: Ic4c78fb27b0676383143b943d97a511b960e01b1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-10-12[RCAR] Change RENESAS_DATADIR valueRonan Le Martret1-0/+2
* AGL doesn't use /usr/local for system files. All the Renesas libraries and binaries will be installed in /usr instead of /usr/local. Bug-AGL: SPEC-1571 Change-Id: Ibc40df5d492517773bf89e4e0f117a02d22d90cd Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-08Mutualizes code for ulcb card family conf fileRonan Le Martret5-106/+52
Remove duplicate code between ulcb card configuration card. Since more an more ulcb card and extention, it becomes difficult to maintain the conf file of the ulcb family. Change-Id: Id5648f4e75c464875d3b175c769e1fdd7f4312f5 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-09-18agl_raspberrypi3.inc: WiFi on Raspberry Pi 3 B & B+Leon Anavi1-1/+1
Use linux-firmware-raspbian packages for bcm43430 and bcm43455. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ib634ee3351fa91d8d1704656f4a40d1b40cd05e3 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-13Uprev the nogfx machine include to the same stateJan-Simon Möller1-0/+3
as the ordinary m3 build. Change-Id: If07a26f1cb253b9863ea658e6cd122450f03a38b Bug-AGL: SPEC-1640 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-16Add machine templates for qemuarm and qemuarm64Jan-Simon Möller3-0/+49
This changeset adds the necessary tepmlates to build the qemu targets for ARM 32bit and 64bit. The MACHINE names are 'qemuarm' and 'qemuarm64'. As the compiler flags for qemuarm in Yocto are using the equivalent of armv5te, we need to ship our own machine/qemuarm.conf with our default tuning for armv7-a (YP name armv7ve), and overrides to build a v7 kernel and use a v7 capable QEMU machine. For qemuarm64, some additional kernel configuration is enabled to allow building and loading of the MOST drivers. Bug-AGL: SPEC-756 Change-Id: I0a688a1d61a75f1287902fc2733a8a54b0485a34 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-08-06Reduce fixed memory split on RPi3Jan-Simon Möller1-1/+1
As it turns out, the driver uses cma and the fixed memory split is only needed at boot time before cma takes over or for the old driver. Thus we can safely reduce it down again as it does not help with the limited cma memory at all. Change-Id: Ibd5da5da931d02777e8d69543ce44e6b536402b1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-02Remove touchscreen additionJan-Simon Möller1-3/+0
Kernel 4.14 does not ship the dtb anymore, we pin on 4.9 for now. Change-Id: I96228b014dc09efbc7379383b2795a8d4eadf022 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-30Re-add dra7-evm-lcd-lg.dtb as it the screen of the board in CIJan-Simon Möller1-0/+3
Change-Id: I3265c71669124c3ee94be86993d45604356c5735 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-24Bump gpu memory on rpi3Jan-Simon Möller1-1/+1
This gives the gfx core some more head room. Change-Id: Ibff2aa3ed7fac1a3a199fa738cb47982ac56a298 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-05-313rd part of the layer/profile rework [1/2]Jan-Simon Möller2-4/+1
This is the last larger commit in this series and deals with the graphical part. We introduce the graphical profiles: - meta-agl-profile-graphical -- meta-agl-profile-graphical-html5 -- meta-agl-profile-graphical-qt5 Notable changes: - weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images. - new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds - new image/sdk: agl-image-minimal-crosssdk - agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical. - The wayland-ivi-extension moved to the agl-demo-platform. - The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now. - added and massaged the agl-features. - found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g) Todo: - we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages. For further details, see meta-agl/docs/profiles.md. v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES. v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel) v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane) v5: fix missing packagegroup inclusion v6: explicitely put profile-graphical-qt5 on-top of profile-graphical v7: re-add 'procps' when agl-devel feature is on Bug-AGL: SPEC-145 Change-Id: I24cdcd1118932758d0c55d333338238f2a770877 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-05-14Temporary fix for -nogfx target during layer reorgJan-Simon Möller1-0/+3
This fix is needed to unbreak the build due to a parsing error in the nogfx target (qt5 not enabled but bbappends present). Change-Id: I9da2a5854849c147c7917c75b5783b755b9130f1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-04-05Rework how we pass arguments to QEMU, provide a wks.in fileTom Rini1-5/+8
- The official hook for changing the resolution we tell QEMU is UVESA_MODE so change agl_qemux86-64.inc to set the value there rather than override the whole of QB_KERNEL_CMDLINE_APPEND. - Make agl_qemux86-64.inc further append what's needed to QB_KERNEL_CMDLINE_APPEND as APPEND isn't used in the filesystem images we create anymore. - Create a directdisk.wks.in file that will (a) use --use-uuid and not force /boot to be looked for on /dev/sda1 (when it will _NOT_ be) and (b) evaluate QB_KERNEL_CMDLINE_APPEND to determine what the bootargs to the kernel will be. Change-Id: I49894d70e6c0010e0907b72f19fcc8fb0917e34a Bug-AGL: SPEC-1301 Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-04Adapt repository priorities in preparation of the profilesJan-Simon Möller1-1/+1
The profiles need a clear priorization of the layers. Especially the core layers need a high prio in this context. Apply a prio of 70 to core/essential layers and of 60 to BSP, netboot and smack. Change-Id: I24a59daadab4c98ffbcb799cc784e84e87ac7d23 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-03-29Merge "Merge branch 'sandbox/ronan/rocko_kf'"Jan-Simon Moeller3-9/+2
2018-03-20Update BBMASK for ulcb boardRonan Le Martret3-9/+2
* We don't need to black list rcar BSP recipes any more. Change-Id: If7081b8cfa2ae936f6ed9f957054fd57a45cc968 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-03-13re-enable gobject-introspectionMartin Kelly2-4/+0
In commit f9a285987c5c956d445efeea6c60f258534fe57b, we disabled gobject-introspection due to a build error as part of the Rocko transition. However, the only build errors were on qemu, which were caused by not emulating SSE4.2 (see poky commit 5b2b343453e805be013e721d079bc24de946f28b for details). Emulate SSE4.2 in qemu and re-enable gobject-introspection. Change-Id: I073db2c37623bb8ba6b7809ca0c3bba5213001e2 Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-03-13Merge "dra7xx-evm, beaglebone: Switch to sdimage-bootpart-uuid for wic"Jan-Simon Moeller2-1/+2
2018-03-08dra7xx-evm, beaglebone: Switch to sdimage-bootpart-uuid for wicTom Rini2-1/+2
Introduce a new wks file, sdimage-bootpart-uuid.wks that differs from sdimage-bootpart.wks in that it uses --use-uuid rather than --ondisk as PARTUUID is more portable and we do not use busybox mount in our images. Bug-AGL: SPEC-1336 Change-Id: Ib98d1e49406f8b8ac13c3947f4efbc4360cf9865 Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-07Add db-820c as community boardJan-Simon Möller1-0/+2
Add templates for the db-820c as community board alongside the 410c. Only works with rocko/master. v2: - fixed 96board-tools inclusion - added kernel bbappend Change-Id: I411505ae0aeb5939338bb94f5db04c2572fc6612 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-03-02enabling kernel 4.14Dominig ar Foll Intel Open Source1-0/+3
Change-Id: I95916851bcdb730767206c736b2e2b2510c9517b Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
2018-02-22Merge "Remove old boards for rocko"Jan-Simon Moeller3-232/+0
2018-02-20Remove old boards for rockoJan-Simon Möller3-232/+0
Old boards being removed: - porter templates - wandboard (untested) - qemux86 (qemux86-64 - aka 64bit - is the only default) Change-Id: Ia366cdeac988780dc3253e20357b868b3b6b8070 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-02-20Fixes for meta-agl-bsp for rockoJan-Simon Möller1-1/+3
These changes are included: - dra7xx-evm,meta-ti: disable gstreamer-plugins-bad on vayu until fixed - meta-boundary: has no rocko branch, remove the folder - meta-intel: generalize the libva bbappend - general: remove the lua bbappend as it is upstream - general: re-add fix for kernel-devsrc (see https://gerrit.automotivelinux.org/gerrit/#/c/11209/) Documents fixme's in meta-agl-bsp/ROCKO.FIXMEs. Change-Id: I3df32632558d503c3ce343f907a1ee1e15ae7e26 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-02-13Update ulcb conf fileronan2-21/+5
Change-Id: I2c68a132e315a61117a6d6709bafbff58dff8847 Signed-off-by: ronan <ronan.lemartret@gmail.com>
2018-02-13[GEN3] add preferred version on omx packageronan1-0/+2
Change-Id: I61c6971adddd756ebec262b084b8e4d847d1cb8f Signed-off-by: ronan <ronan.lemartret@gmail.com>
2018-02-13Fix gst omx versionRonan Le Martret2-0/+4
Change-Id: I2f98d01a1060003258fd421c5708ec24a284241a Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-02-13Change image type to wic.vmdkChanghyeok Bae1-1/+2
vmdk image type is changed to wic.vmdk in upstream. (From Poky rev: 9d07c736e39a9aa922630b4241eda185a19a11ea) (From OE-Core rev: 929ba563f1bc7195c4981b8e139c432b2cc388ea) Bug-AGL: SPEC-1181 Change-Id: I94fab8ce4d075776b5f72d1c270a333d6b34a4b7 Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
2018-02-05bsp: add salvator-x H3 supportMartin Kelly1-0/+3
The Salvator-X uses the same SoC as the H3 but includes other peripherals. As a result, it can reuse the same h3ulcb config but needs a different device tree and kernel config. This is already supported in meta-rcar-gen3 but needs AGL plumbing, so add it. There is also an M3 version of the Salvator-X, but I don't have one and cannot test it. So I've added support only for the H3 version here. Change-Id: I64683f4f65dda3fee63e6243f0ba916e568ca245 Signed-off-by: Martin Kelly <mkelly@xevo.com>
2017-12-13Enabled general Intel bluetooth driver support instead of specific one.Kien Dinh1-1/+1
ibt-11-5 is the specific firmware for Joule. The image for IA should be able to include multiple firmware, including this one. For having the firmware in the image, please include linux-firmware-ibt by IMAGE_INSTALL_append = ' linux-firmware-ibt' Change-Id: I4451dbbf54145df784b763dd3ef924d8a7ac8863 Signed-off-by: Kien Dinh <kien.t.dinh@intel.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12421 Reviewed-by: Thomas Rini <trini@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-12-10meta-intel: Switch to using WIC images onlyTom Rini2-25/+9
The hddimg format has a hard-stop at 4GB sized images. We can trigger this rather easily at this point under agl-demo-platform-crosssdk. WIC images do not have any such limitation, so we remove hddimg from the list of built images. The main impact of this is that whereas before we would modify the default kernel command line via APPEND in the conf file we would now modify it via the wks file we create for each platform and that mkefi-agl.sh is now redundant. These wks files are based on the systemd one but also reflect the design of mkefi-agl.sh in that they drop the swap partition. Much of the APPEND commentary is moved to the wks file and we remove some irrelevant comments as well. Bug-AGL: SPEC-963 Change-Id: If667e1f946e4b9793b63f6d7f572d56d73e35767 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12159 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2017-11-22Add sota support for Renesas R-Car M3Anton Gerasimov2-0/+2
Everything for R-Car M3 support is in place, just DISTRO_FEATURES 'sota' was missing. Change-Id: Ib22ee4ace894ff5426ba4f06c7ec8bd208cb4e5f Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12091 Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-31meta-agl-bsp: templates: update of nitrogen6x machine templateMihail Grigorov1-0/+5
Bug-AGL: SPEC-905 Change-Id: I959a9f8d085b0fb247998790191c3dcf2e4e34fa Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11567 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Matt Porter <mporter@konsulko.com>
2017-10-31imx6qsabrelite starts to using 'meta-boundary' layerMihail Grigorov1-2/+3
a) Adding 'meta-boundary' to bblayers.conf. b) Prevent of build errors from missing bb files (firefox, chromium), with help of BBMASK variable. Bug-AGL: SPEC-905 Change-Id: Id0b823d4f0e8977206dbd22684e0d2cf9e88465f Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11569 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Matt Porter <mporter@konsulko.com>
2017-10-31meta-agl-bsp: imx6qsabrelite: Switch to WIC imageMihail Grigorov1-3/+7
To produce a bootable WIC image, we needs to make some changes in 6x_bootscript for compatibility with WIC and SDCARD images. Because in case of WIC, we have one partition, and the kernel files are located in /boot directory. In case of SDCARD image, kernel files are in root directory of first partition. Bug-AGL: SPEC-899 Change-Id: Ie4b26a703cc468ff8c8405e957aacc2973ee289a Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11571 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Matt Porter <mporter@konsulko.com>
2017-10-21R-Car Gen3: Add WIC supportTom Rini2-0/+10
Add a new wks file for the R-Car Gen3 platforms. Given that U-Boot is on-device and not updated by us, we just need to make a single partition that contains the rootfs. This matches the existing instructions. We need to include kernel-devicetree into the resulting image so that we have the device tree there to be loaded in. Bug-AGL: SPEC-899 Change-Id: Iad55ef0ed49e7a53846fa36393e71d16cd5e423d Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11391 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Scott Murray <scott.murray@konsulko.com>
2017-10-20weston-ini-conf: Rework to use fragments to construct weston.iniTom Rini1-2/+2
Switch to constructing the weston.ini from fragments of files instead of variables and variable flags. This allows for much easier tracking of signatures by leveraging existing mechanisms. Update the Readme to explain how to do the various operations with fragments as well. Note that for QEMU we do not need to pass -show-cursor as it's already provided and we do want to change the VGA driver to one that reliably provides DRM support. For the HDMI connected screens, rather than name them by vendor name them first for connection and then required transformation for correct orientation. For board-specific options, move them to the board directories. When we need to change existing cfg options, rather than replace them the proper location to do this in is the do_configure function. Bug-AGL: SPEC-964 Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-14meta-agl-bsp: Make more and better use of WIC imagesTom Rini4-3/+10
- When we are using a WIC image, we should compress it (xz), provide a sha256sum of the compressed image and provide a bmap file for the uncompressed image. - Ensure that in these targets we are listing WIC as the AGL_EXTRA_IMAGE_FSTYPES to be used. - Based on the Beaglebone example, add WIC support for dra7xx-evm. The only change from Beaglebone is that we must also include uEnv.txt as this is what controls the DTB for the correct LCD. Bug-AGL: SPEC-899 Change-Id: I3f310a2eb268a4aaa0d791dfaa68d7fee350e150 Tested-by: Matt Porter <mporter@konsulko.com> (dra7xx-evm) Tested-by: Tom Rini <trini@konsulko.com> (Intel) Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11161 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-14BSPs: Do not use := for AGL_DEFAULT_IMAGE_FSTYPESTom Rini5-5/+5
An OpenEmbedded best practice would be to use '=' here to allow users to append to it later on. Bug-AGL: SPEC-899 Change-Id: I5a664df7c5eb8d71f0ab6d0723292f3a187fe752 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11229 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-14meta-agl-bsp: Enable WIC support for Raspberry Pi 2/3Tom Rini2-10/+26
In order to have WIC images be fully functional for both u-boot and non-u-boot we need to bring in more logic in determining what files will get mapped to what location. This is not found in meta-raspberrypi/pyro but is found in their master branch. These changes bring us in sync with meta-raspberrypi/conf/machine/include/rpi-base.inc as of their revision c26e9d3df54293a88fba047a29b335f52b01120e for Pi 2 and Pi 3. We do not attempt to bring in the additional logic they have to handle Pi 3-64 and U-Boot at this time as that is more invasive and not required for our use cases. Bug-AGL: SPEC-409 Change-Id: I642735a9be3daad96c0c1376cd6341b0697ffc09 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11207 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-14meta-agl-bsp: imx6: Update the imx6sabreauto machine templateMihail Grigorov1-0/+1
* Chnage the Weston provider to Weston 2.0 Bug-AGL: SPEC-905 Change-Id: I164285dfb63491f2164d667fc51f64b66e5cee27 Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11309 Reviewed-by: Leon Anavi <leon.anavi@konsulko.com> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Matt Porter <mporter@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-14meta-agl-bsp: imx6: Update the imx6qsabrelite machine templateMihail Grigorov1-0/+34
* Add include/agl_imx6qsabrelite.inc * Change the FSL layer from meta-fsl-* to meta-freescale-* * Rename 50_bblayers.conf.inc to 40_bblayers.conf.inc Bug-AGL: SPEC-905 Change-Id: I29563fa7bc25240018383fba2b30e2171366282a Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11307 Reviewed-by: Leon Anavi <leon.anavi@konsulko.com> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-09-15Create virtual-gles-user-module recipesRonan Le Martret2-4/+4
* fix recipe-sysroot build dependency Change-Id: I59285efd0894592d23c9114e08dc923e168f03db Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10917 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-09-15Remove weston.bin pkg from gen3 machine confRonan Le Martret3-6/+0
* weston.bin should be add only with pkg-group or image recipes. * No weston on m3ulcb-nogfx Change-Id: Iaa62cbf3a07714a5c9dad014b72feb00927b1e71 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10907 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2017-09-15realigning Joule on kernel 4.9Dominig ar Foll (Intel Open Source)1-1/+0
Change-Id: Ie376f6dbbc31fe59fd55655eec9be8f989a8a5e1 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10897 Reviewed-by: José Bollo <jobol@nonadev.net> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-09-11Fix lacked vspm kernel module for R-Car H3 and M3Harunobu Kurokawa2-0/+2
Missing the vspm kernel driver module sometime it may be not installed to rootfs. Change-Id: I76af517be7f26dec85dc4eceff77c22f02ebdba9 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10831 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>