aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/conf
AgeCommit message (Collapse)AuthorFilesLines
2020-01-21Extend qemux86-64 images to support real hardwarePaul Barker1-2/+2
* Build wic images for qemux86-64 which can be written to a USB stick or SD card. * Support both virtual and physical displays for all qemu targets. * Use a wks file which works on both virtual and physical machines. EFI is now required to boot the VMDK image. * Drop inclusion of `microcode.cpio` in the boot partition in the wic file `systemd-intel-corei7-64-bootdisk.wks`. This file is not available for qemux86-64 images and is not strictly necessary. Bug-AGL: SPEC-2931 Change-Id: Ib3982906e52d3a964a921c9a2234cab697fe0551 Signed-off-by: Paul Barker <pbarker@konsulko.com>
2019-12-03Extend intel-corei7-64 machine to support virtual targetsPaul Barker1-1/+15
These changes allow images built for the intel-corei7-64 machine to be booted under qemu (by using the normal `runqemu` command) and vmware or virtualbox after a build. Functionality on real hardware should not be compromised. Bug-AGL: SPEC-2931 Change-Id: If25782bf59e145cab32a4c9a0e39b599106ce7cc Signed-off-by: Paul Barker <pbarker@konsulko.com>
2019-11-19Support meta-ti 2019.04 releasePaul Barker3-12/+3
* The libgbm recipe has disappeared. "virtual/libgbm" is now provided by ti-sgx-ddk-um. * Update ti-sgx-ddk-km and adapt the AGL toolchain support to fit with the upstream Makefile changes. Change-Id: I2744868b466306cf2c1cb458a6889ab2043f9421 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-11-19raspberrypi4.conf: Enable BluetoothLeon Anavi1-0/+1
Enable Bluetooth for 64-bit AGL images for Raspberry Pi through recipe pi-bluetooth. It provides a script that starts automatically and properly configures BT-HCI. Bug-AGL: SPEC-2936 Change-Id: I01cd5ea446bfe5f4182284c5e88984ee054fe62f Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-19conf/machine/raspberrypi4: Switch to 64-bitLeon Anavi2-13/+144
Switch from 32-bit to 64-bit AGL image for Raspberry Pi 4. Machine configuration has been modified according to the existing configurations from meta-raspberrypi branches master and zeus. When AGL moves to a newer release of the Yocto project and the BSP these configurations can be removed from meta-agl. Bug-AGL: SPEC-2936 Change-Id: Iddc3f75be179797e7d56f6806ec6ba52b080d766 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-05agl_raspberrypi3.inc: Switch to firmware KMSLeon Anavi1-0/+11
Swith to firmware KMS with appropriate Linux kernel and Mesa version to support both HDMI and the official 7" Raspberry Pi touch screen display on Raspberry Pi 3B/B+ and 4. Device tree changes are not required for firmware KMS. Bug-AGL: SPEC-2465 Change-Id: I5f8f62c0151b7eb79ab1f96419d9c62469a1554e Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-10-14meta-agl-bsp: Update PACKAGES_GFX_* for TI boardsPaul Barker3-3/+3
After updating the meta-ti layer to the ti2019.03 release, the 'omapdrm-pvr' package will no longer be defined. As the recipe is already called 'ti-sgx-ddk-km' this change can be applied before updating meta-ti. Change-Id: Ie875a2a6d8a7b2f24460943558160f8aa37f544d Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-09-26raspberrypi4: Fix BluetoothLeon Anavi1-0/+1
Include recipe pi-bluetooth in the Raspberry Pi 4 images to enable Bluetooth. This recipe provides a script that starts automatically and properly configures BT-HCI. The same script is used in Raspbian. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Id650cb2f61ee63196cbd826e4a9dd73488b298c3
2019-09-05Add nogfx build for h3ulcbJan-Simon Moeller1-0/+10
Before we can add the h3 to CI we need a -nogfx build. v3: leave the BBMASK in the board specific file due to inc file stacking. Change-Id: Ic59784aa143e3346d2f999060214411497fc1b54 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-09-04Revert "Add nogfx build for h3ulcb"Jan-Simon Moeller3-10/+5
This seems to have broken master. Needs to be edited. Thus revert and resubmit. This reverts commit dd21b3a6e340006d2ef4036cabf33c9e9a66e9ac. Change-Id: I2423dacba83813cc6350096c89d80cf1d23e9568
2019-09-03Add nogfx build for h3ulcbJan-Simon Moeller3-5/+10
Before we can add the h3 to CI we need a -nogfx build. v2: moved common bits Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I9d64764fbe69dc901dc91941db1deb0073e2ae9c
2019-08-30agl_raspberrypi3.inc: Set CMA for SOTALeon Anavi1-0/+2
Add CMA to the kernel arguments in uEnv.txt for U-Boot in images with enabled feature agl-sota for software-over-the-air (SOTA) updates for Raspberry Pi 3 B/B+. Bug-AGL: SPEC-2729 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Id6914de6a41ebfd3fc28ca2948a15d891c9a30b3
2019-07-25intel-corei7-64: Remove ttyS2 from SERIAL_CONSOLESScott Murray1-0/+2
Remove ttyS2 from SERIAL_CONSOLES in the intel-corei7-64 include file. This quiets the log spamming on Up^2 from the device not being present. The commit that added ttyS2 to SERIAL_CONSOLES in meta-intel (61634f8) does not explain what boards need it, but since neither the minnowboard or Up^2 do, not having it by default seems reasonable. Bug-AGL: SPEC-2678 Change-Id: I9afd1584dd7b92e8d15363c3119b770c592b3c52 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-07-24Fix i.MX6 multiple package tuning problemScott Murray3-0/+15
Update the i.MX6 machine definition include files to disable the dynamic package architecture logic in meta-freescale, as it conflicts with AGL's setting of DEFAULTTUNE and results in a split package feed. Bug-AGL: SPEC-2665 Change-Id: I66ff03b0bc48b3b768b9ec88c907eaa95e1a2b00 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-07-24raspberrypi4.conf: Add machine definitionLeon Anavi1-0/+25
Add a new machine definition for Raspberry Pi 4 because it is not present in branch thud of meta-raspberrypi. This machine definition is taken from the master branch of the upstream of Yocto/OE layer meta-raspberrypi. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I368f6c7107ca023da66ce60d2006984f8939cf00
2019-07-23machine: Add new ebisu machinePierre Marzin1-0/+13
* Add ebisu dependency within renesas bootfiles * Delete rcar ADAS layers support * Add weston video output config * Add missing modules and gst plugin Bug-AGL: SPEC-2564 Change-Id: I61a44f831d0bc55210847eade2a1eacc7599fa74 Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
2019-07-13Revert "Fix rpi touchscreen support on master"Jan-Simon Moeller1-8/+0
We need to reconsider this changeset. It seems to produce a regression. This reverts commit ccb667c35ffdea7a2bc1304750e6b22368cd55f7. Change-Id: I42754a899e8530f4e18a069ed227f18a8d615801
2019-06-20Add cubox-i and nitrogen6x i.MX6 machinesScott Murray2-0/+39
Add the cubox-i (covering SolidRun Cubox-i, Hummingboard Gate and Edge), and nitrogen6x (covering Nitrogen 6x and SABRE Lite) machine definitions. Note that support for the Broadcom Bluetooth chipset on the SolidRun i.MX6 SOM is currently missing, as it requires firmware that is not available in either the linux-firmware package or from the firmware packages provided by meta-freescale. Bug-AGL: SPEC-2517 Change-Id: If7bdb9f1af9bb67dba5c1ff836a6d3b04160fefd Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-06-20meta-agl-bsp: Changes to get imx6qdlsabreauto working with etnavivScott Murray1-15/+11
Update imx6qdlsabreauto configuration to use open source etnaviv GPU driver instead of Vivante. The previously required weston-ini-conf has been removed as it is not required with etnaviv, and a bbappend has been added for the linux-fslc kernel that this configuration uses so it will pull in the AGL kernel bits. Additionally, the kernel configuration for linux-fslc is tweaked with config fragments to better match the other AGL platforms. Bug-AGL: SPEC-1674, SPEC-2502 Change-Id: Ic40d310b48405ccc7d1435f0fc9f162a129cffe9 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-06-11Merge "Do not pull pulseaudio-misc if pulseaudio is not enabled"Jan-Simon Moeller1-1/+1
2019-06-12Do not pull pulseaudio-misc if pulseaudio is not enabledJan-Simon Möller1-1/+1
This fixes a build issue on ti vayu Missing or unbuildable dependency chain was: ['agl-demo-platform', 'pulseaudio-misc', 'alsa-plugins-pulseaudio-conf'] Bug-AGL: SPEC-2473 Change-Id: I9f9c85893b30a8aa98a6da1e76440a0df5076fa2 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-06-11Import aglsetup templates and config for BBEPaul Barker1-0/+43
The templates and config include files used with aglsetup.sh to build for the Sancloud BBE are imported from the meta-sancloud layer. This should make future maintenance easier. The templates are updated to match the new repository structure at the same time. Bug-AGL: SPEC-2507 Change-Id: I2b4717bd79d949a12b13e6bfece152e82bb8114c Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-06-05Fix rpi touchscreen support on masterJan-Simon Möller1-0/+8
We seem to miss a few bits that changed between kernel 4.9 and kernel 4.14 regarding the 7'' touchscreen. One addition is the rpi-backlight.dtbo which we also need to use in our create-combined-dtb recipe for CI use. We also seem to require https://github.com/raspberrypi/linux/pull/2693#issue-217750943 . Thanks to Scott Murray for the help digging through this. v2 and v3: add devicetree changes v4 and v5: fix name of dtbo v6: move append to machine include - we need it as a global var v7: add to config.txt for sdcard boot case Bug-AGL: SPEC-2465 Change-Id: I2bb3cd974b74a790292e1f36ffdca034928e0bca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-21Remove the 64bit rpi3 targetJan-Simon Möller1-25/+0
As memory is already low on 32-bit, the 64-bit target is deprecated for now. There is no benefit in maintaining two targets atm. Change-Id: I29d755ff70693280dcc1e4ce996bd4c2894bacfb Bug-AGL: SPEC-2323 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-29Merge "Add ARC HSDK board support"Jan-Simon Moeller1-0/+5
2019-04-29Merge "Remove inactive devices"Jan-Simon Moeller4-110/+0
2019-04-29Remove inactive devicesJan-Simon Möller4-110/+0
Remove device which are EOL, unused or do not work. As discussed during the SAT call: - rpi2 : -- will not work for IVI due to the CPU -- use the rpi3 instead - joule : -- EOL for ~1y, no longer available for purchase, no way to test. i.MX6: Remove currently unmaintaned boards. Can re-add on request. - imx6qsabrelite: -- replaced with uprev'd imx6qsabreauto -> imx6qdlsabreauto - nitrogen6x: -- no thud branch upstream. Bug-AGL: SPEC-2323 Change-Id: I28a70dcb7b48b6a9396d3003cc34d4c1f6570eca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-26Add ARC HSDK board supportEvgeniy Didin1-0/+5
This changeset adds the necessary files to build image for Synopsys ARC HS Development Kit (HSDK). Most of necessary tunnings are stored in meta-synopys layer. Synopsys DesignWare HSDK (which stands for ARC HS Development Kit) is the latest and greatest development platform that sports quad-core ARC HS38 in real silicon. Most noticeable features of the board are: * Quad-core ARC HS38 CPU running at 1GHz * 4Gb of DDR * Built-in Vivante GPU * Built-in Wi-Fi/Bluetooth module Peripherals: * [micro] SD-card slot * 2 USB 2.0 ports * 1Gbit Ethernet port * Built-in Digilent JTAG probe * Serial port accessible via micro-USB port New feature: SPEC-2346 Change-Id: I8772ee51cc3db9f6549da2d6a5ea2d116586cde6 Signed-off-by: Evgeniy Didin <didin@synopsys.com>
2019-04-23Fix imx6qdlsabreauto machine configurationBechir Mghirbi2-47/+20
The imx6qsabreauto target was falling behind and could not be build for GG-7.0. The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro. However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets. This patch makes the required changes to fix the imx6qsabreauto machine configuration: - removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro - updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer - deletes reference to packagegroup-fscl-* not required to build AGL - add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon' v2 (jsmoeller): moved board name to match MACHINE v3 (bechir.mghirbi): - remove wayland_2.0.0 as weston_4.0.0.imx is used. - use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard' - Add CFG80211 Kernel configuration Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-04Upgrade to thudScott Murray6-17/+8
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-11-30Enable agl-sota for h3ulcbAnton Gerasimov4-1/+10
Change-Id: I3c2d0df6e3afd4aa0671261f7d143ac15d88a836 Signed-off-by: Anton Gerasimov <tossel@gmail.com>
2018-11-29agl_raspberrypi3.inc: Add create-combined-dtbLeon Anavi1-1/+1
Include the recently added Yocto/OE recipe create-combined-dtb for combining dtb and dtbo to Raspberry Pi builds. Bug-AGL: SPEC-1775 Change-Id: I4bb91d9e5d7f6f5b8fe6a9371d85b93aa26bff1e Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-14dragonboard-410c: change init sequence of the qcom kernel moduleYuya Ono1-1/+2
Since db410c's DSP is enabled from the rocko branch, an error occurs at boot time. This patch is workaround by change init sequence of kernel module on booted with reference to the following discussion. (https://lkml.org/lkml/2018/10/31/440) Change-Id: I5e1b94a7b17889610b3beecccd3e99f4bc445226 Signed-off-by: Yuya Ono <Ono.Yuya@ap.MitsubishiElectric.co.jp>
2018-11-07Latest meta-altera supports wic IMAGE_FSTYPEJan-Simon Möller1-1/+1
In preparation of the layer uprev, fix the IMAGE_FSTYPE. Change-Id: Ic4c78fb27b0676383143b943d97a511b960e01b1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-10-12[RCAR] Change RENESAS_DATADIR valueRonan Le Martret1-0/+2
* AGL doesn't use /usr/local for system files. All the Renesas libraries and binaries will be installed in /usr instead of /usr/local. Bug-AGL: SPEC-1571 Change-Id: Ibc40df5d492517773bf89e4e0f117a02d22d90cd Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-08Mutualizes code for ulcb card family conf fileRonan Le Martret5-106/+52
Remove duplicate code between ulcb card configuration card. Since more an more ulcb card and extention, it becomes difficult to maintain the conf file of the ulcb family. Change-Id: Id5648f4e75c464875d3b175c769e1fdd7f4312f5 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-09-18agl_raspberrypi3.inc: WiFi on Raspberry Pi 3 B & B+Leon Anavi1-1/+1
Use linux-firmware-raspbian packages for bcm43430 and bcm43455. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ib634ee3351fa91d8d1704656f4a40d1b40cd05e3 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-13Uprev the nogfx machine include to the same stateJan-Simon Möller1-0/+3
as the ordinary m3 build. Change-Id: If07a26f1cb253b9863ea658e6cd122450f03a38b Bug-AGL: SPEC-1640 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-16Add machine templates for qemuarm and qemuarm64Jan-Simon Möller3-0/+49
This changeset adds the necessary tepmlates to build the qemu targets for ARM 32bit and 64bit. The MACHINE names are 'qemuarm' and 'qemuarm64'. As the compiler flags for qemuarm in Yocto are using the equivalent of armv5te, we need to ship our own machine/qemuarm.conf with our default tuning for armv7-a (YP name armv7ve), and overrides to build a v7 kernel and use a v7 capable QEMU machine. For qemuarm64, some additional kernel configuration is enabled to allow building and loading of the MOST drivers. Bug-AGL: SPEC-756 Change-Id: I0a688a1d61a75f1287902fc2733a8a54b0485a34 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-08-06Reduce fixed memory split on RPi3Jan-Simon Möller1-1/+1
As it turns out, the driver uses cma and the fixed memory split is only needed at boot time before cma takes over or for the old driver. Thus we can safely reduce it down again as it does not help with the limited cma memory at all. Change-Id: Ibd5da5da931d02777e8d69543ce44e6b536402b1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-02Remove touchscreen additionJan-Simon Möller1-3/+0
Kernel 4.14 does not ship the dtb anymore, we pin on 4.9 for now. Change-Id: I96228b014dc09efbc7379383b2795a8d4eadf022 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-30Re-add dra7-evm-lcd-lg.dtb as it the screen of the board in CIJan-Simon Möller1-0/+3
Change-Id: I3265c71669124c3ee94be86993d45604356c5735 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-24Bump gpu memory on rpi3Jan-Simon Möller1-1/+1
This gives the gfx core some more head room. Change-Id: Ibff2aa3ed7fac1a3a199fa738cb47982ac56a298 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-05-313rd part of the layer/profile rework [1/2]Jan-Simon Möller2-4/+1
This is the last larger commit in this series and deals with the graphical part. We introduce the graphical profiles: - meta-agl-profile-graphical -- meta-agl-profile-graphical-html5 -- meta-agl-profile-graphical-qt5 Notable changes: - weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images. - new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds - new image/sdk: agl-image-minimal-crosssdk - agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical. - The wayland-ivi-extension moved to the agl-demo-platform. - The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now. - added and massaged the agl-features. - found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g) Todo: - we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages. For further details, see meta-agl/docs/profiles.md. v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES. v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel) v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane) v5: fix missing packagegroup inclusion v6: explicitely put profile-graphical-qt5 on-top of profile-graphical v7: re-add 'procps' when agl-devel feature is on Bug-AGL: SPEC-145 Change-Id: I24cdcd1118932758d0c55d333338238f2a770877 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-05-14Temporary fix for -nogfx target during layer reorgJan-Simon Möller1-0/+3
This fix is needed to unbreak the build due to a parsing error in the nogfx target (qt5 not enabled but bbappends present). Change-Id: I9da2a5854849c147c7917c75b5783b755b9130f1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-04-05Rework how we pass arguments to QEMU, provide a wks.in fileTom Rini1-5/+8
- The official hook for changing the resolution we tell QEMU is UVESA_MODE so change agl_qemux86-64.inc to set the value there rather than override the whole of QB_KERNEL_CMDLINE_APPEND. - Make agl_qemux86-64.inc further append what's needed to QB_KERNEL_CMDLINE_APPEND as APPEND isn't used in the filesystem images we create anymore. - Create a directdisk.wks.in file that will (a) use --use-uuid and not force /boot to be looked for on /dev/sda1 (when it will _NOT_ be) and (b) evaluate QB_KERNEL_CMDLINE_APPEND to determine what the bootargs to the kernel will be. Change-Id: I49894d70e6c0010e0907b72f19fcc8fb0917e34a Bug-AGL: SPEC-1301 Signed-off-by: Tom Rini <trini@konsulko.com>
2018-04-04Adapt repository priorities in preparation of the profilesJan-Simon Möller1-1/+1
The profiles need a clear priorization of the layers. Especially the core layers need a high prio in this context. Apply a prio of 70 to core/essential layers and of 60 to BSP, netboot and smack. Change-Id: I24a59daadab4c98ffbcb799cc784e84e87ac7d23 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-03-29Merge "Merge branch 'sandbox/ronan/rocko_kf'"Jan-Simon Moeller3-9/+2
2018-03-20Update BBMASK for ulcb boardRonan Le Martret3-9/+2
* We don't need to black list rcar BSP recipes any more. Change-Id: If7081b8cfa2ae936f6ed9f957054fd57a45cc968 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-03-13re-enable gobject-introspectionMartin Kelly2-4/+0
In commit f9a285987c5c956d445efeea6c60f258534fe57b, we disabled gobject-introspection due to a build error as part of the Rocko transition. However, the only build errors were on qemu, which were caused by not emulating SSE4.2 (see poky commit 5b2b343453e805be013e721d079bc24de946f28b for details). Emulate SSE4.2 in qemu and re-enable gobject-introspection. Change-Id: I073db2c37623bb8ba6b7809ca0c3bba5213001e2 Signed-off-by: Martin Kelly <mkelly@xevo.com>