| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Update weston_*.imx.bbappend name for the new 12.0.3 version in
meta-freescale that came in with the scarthgap 5.0.1 bump.
Bug-AGL: SPEC-5212
Change-Id: I69ce5489a8494cb0076cc57949e3c301f7e8f98d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/30137
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
(cherry picked from commit 76d49cd202d0920a551b4d0bd9e3405a08342eba)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/30126
|
|
These changes should allow the etnaviv GPU driver using NXP i.MX6
and i.MX8 machines (e.g. cubox-i, imx8mq-evk) to build. Testing on
hardware is required for the i.MX6, and etnaviv does not seem to be
working on the i.MX8MQ-EVK as the previous devicetree tweak being
used no longer seems applicable. Further investigation will be
done in the near future as time permits.
Notable changes:
- The i.MX6 configurations have been switched to using the linux-fslc
kernel instead of linux-fslc-lts, as the latter is older (6.1 vs
6.6).
- The kernel patch against linux-fslc-imx to enable the MHDP driver
when using etnaviv has been removed since it is no longer required.
- The local workaround to allow enabling the "wayland" PACKAGECONFIG
when building weston-imx has been replaced with use of the now
provided upstream variable that allows that. Note that building
with this version of Weston has not been tested since it is tied to
using the Vivante GPU driver.
Bug-AGL: SPEC-5122
Change-Id: I75810dd152197f9435158839fad00327ed7e42e7
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29878
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Since linux-fslc-lts does not boot on the EVK at the moment,
and both it and linux-fslc still do not have support for the
HDMI output, switch back to using linux-fslc-imx with tweaks
to use etnaviv as we did pre-kirkstone.
- A bbappend has been added for linux-fslc-lts since that was
missed in a previous upgrade, and even though we are not using
it now, it is possibly useful for other i.MX variants.
- A machine template for using the NXP BSP with the Vivante GPU
driver, imx8mq-evk-viv, has been restored, as testing shows it
now works with the current panel-less homescreens. As before,
the intent of this configuration is for testing or as an example
of potential production use of meta-freescale where NXP support
is available.
- Start up of Bluetooth support has been disabled, as it currently
causes kernel oopses or panics (both have been seen in testing).
This happens with both machine templates. SPEC-4807 has been
opened to track this issue.
Bug-AGL: SPEC-4799
Change-Id: I38e4e720643714541efb0fed08d5ab64545bb02d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28925
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Rename machine template and related files to use imx8mq-evk instead
of imx8mqevk to match meta-freescale change.
- Switch to purely using the default "mainline" BSP configuration in
meta-freescale for imx8mq-evk as opposed to the tweaking of the
"nxp" configuration previously used. The mainline configuration now
builds a working image, and this lowers maintenance on our part.
- Remove imx8mqevk-viv configuration to build with Vivante GPU driver.
NXP have not yet released Weston 10 support, and at this point the
etnaviv driver is stable. If a demonstration of support of Vivante
is requested in the future (e.g. for other i.MX8 variants that still
require it), this can be revisited.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I7e279268463f68978ecd2990927aab6d64e3cbd2
|
|
This is mostly the result of running a slightly customized version
of the convert-overrides.py script from poky with additional
overrides added. A few minor fixups were done by hand afterwards
during a review of the changes.
The intent of these changes is to minimize the effort to keep the
"next" branch that builds against poky master up to date and tested
in preparation for the switch to the next Yocto LTS release in
early 2022.
Bug-AGL: SPEC-4052
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The recent layer reorganization broke the landscape vs portrait scheme
based on bbappend'ing the weston-ini-conf recipe in the previous cluster
and html5 demo layers. To fix this and to facilitate being able to
easily build the mix of demo platform images, the weston.ini generation
mechanism in the weston-ini-conf has been revised to build multiple
packages.
Instead of relying on SRC_URI to install weston.ini fragments into
WORKDIR and grabbing all of them with a *.cfg glob, an explicit list
built from new WESTON_FRAGMENTS and WESTON_DISPLAYS variables is used.
The fragments listed in WESTON_FRAGMENTS are used to generate both
weston-ini-conf and weston-ini-conf-landscape packages containing
uniquely named files (weston.ini.default and weston.ini.landscape,
respectively), and the OE update-alternatives mechanism is used to have
weston.ini point at the appropriate file on installation. For now, the
two packages are explicitly marked as incompatible with one another,
but this could be tweaked in the future if switching between them on
target is desired.
Additional notes:
- A RPROVIDES of "weston-ini" has been defined for the weston-ini-conf
packages and a RDEPENDS on it added to weston-init. This should
allow members to drop in a complete alternative solution while still
having a dependency chain.
- The various meta-agl-bsp bbappends of weston-ini-conf have for the
most part been updated to yield the same behavior as before, though
with an eye towards using machine overrides to ease multiconfig usage
down the road. This includes the currently unused Raspberry Pi
touchscreen support, which has been left since it may still see use.
- An exception to the above, however, is that the support for the
touchscreen on the dra7 EVM has been removed, as upstream dropped the
support for the screen on the available test hardware and at present
it only seems feasible to support external HDMI monitors.
- The unused fbdev fragment used to support meta-freescale in the past
has been removed.
- The virtual and virtual-landscape fragments have been renamed to
virtual-270 and virtual-0 to better indicate the orientation and match
the naming used for the other fragments. It is likely that future
work will need to split the display enabling and orientation aspects,
as the current tying together of the two results in configurations
somewhat overly specific to the actual AGL demo systems.
Bug-AGL: SPEC-3745
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I2a968781182a346c1d483cca4fd7337679e58118
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25860
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The layer updates to go to the latest 3.1.4 Yocto dunfell release
broke the imx8mqevk and imx8mqevk-viv builds, though for different
reasons.
imx8mqevk fixes:
- Remove the now upstreamed etnaviv kernel patches that had been
backported by Walter.
- Turn off btrfs support in the linux-fslc-imx kernel configuration.
This is required due to meta-freescale having a 5.4 kernel new
enough to need a lttng-modules fix for btrfs that has not yet been
backported from the Yocto master branch to dunfell.
- Update the PREFERRED_VERSION over-rides in agl_imx8mqevk.inc to
match the new versions of libdrm and gstreamer in poky.
imx8mqevk-viv fixes:
- Add weston_8.0.0.imx.bbappend to work around the broken addition
of a PACKAGECONFIG_remove of "x11 wayland" in the recipe in
meta-freescale. Upstream will be engaged to drive getting the
change reverted.
Bug-AGL: SPEC-3725
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I259f2d048a9de653a0060afcef17c4410093783a
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25772
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Add imx8mqevk-viv machine template for i.MX8MQ EVK which uses the
default Vivante driver configuration in meta-freescale with the
new community linux-fslc-imx kernel. The following additional changes
have been made to support this:
- A linux-fslc-imx bbappend has been added to pull in the AGL kernel
configuration, and a imx8mq-evkb config fragment has been added to
enable the required Wifi driver for the updated EVKB board.
- Stale qtbase and weston-init bbappends/patches have been removed
from meta-agl-bsp/meta-freescale-layer.
- The meta-agl-profile-graphical Weston 8.0.0 bbappend has been
renamed to 8.0.% so the wildcard will apply it to meta-freescale's
weston_8.0.0.imx recipe.
Known issues:
- The required PipeWire configuration for the onboard audio needs
further investigation.
Bug-AGL: SPEC-3258
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I4ea5437ef0ea8bedb9dd2157f2822ff25ee56cff
|
|
Update imx6qdlsabreauto configuration to use open source etnaviv GPU
driver instead of Vivante. The previously required weston-ini-conf
has been removed as it is not required with etnaviv, and a bbappend
has been added for the linux-fslc kernel that this configuration uses
so it will pull in the AGL kernel bits. Additionally, the kernel
configuration for linux-fslc is tweaked with config fragments to
better match the other AGL platforms.
Bug-AGL: SPEC-1674, SPEC-2502
Change-Id: Ic40d310b48405ccc7d1435f0fc9f162a129cffe9
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
The imx6qsabreauto target was falling behind and could not be build for GG-7.0.
The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro.
However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets.
This patch makes the required changes to fix the imx6qsabreauto machine configuration:
- removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro
- updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer
- deletes reference to packagegroup-fscl-* not required to build AGL
- add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon'
v2 (jsmoeller): moved board name to match MACHINE
v3 (bechir.mghirbi):
- remove wayland_2.0.0 as weston_4.0.0.imx is used.
- use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard'
- Add CFG80211 Kernel configuration
Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc
Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
in case of using compositor-fbdev
Bug-AGL: SPEC-1192
Change-Id: If81cb3245fac01a32a97b02106ff23b65856d565
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
|
|
The missed flags causes a stop of transformation
SPEC-1192
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Change-Id: I601d2f35d2f73055187db827cc7687a25e4d4ece
|
|
Switch to constructing the weston.ini from fragments of files instead of
variables and variable flags. This allows for much easier tracking of
signatures by leveraging existing mechanisms. Update the Readme to
explain how to do the various operations with fragments as well. Note
that for QEMU we do not need to pass -show-cursor as it's already
provided and we do want to change the VGA driver to one that reliably
provides DRM support.
For the HDMI connected screens, rather than name them by vendor name
them first for connection and then required transformation for correct
orientation.
For board-specific options, move them to the board directories.
When we need to change existing cfg options, rather than replace them
the proper location to do this in is the do_configure function.
Bug-AGL: SPEC-964
Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
In Weston 2.0, the EGL support was dropped from the fbdev-backend,
as that was not the correct way to initialize EGL. However, the
vendor support patches in Weston 1.11 still require that functionality.
Restore the EGL support in the fbdev-backend, until the issue is
resolved, by either adding a standalone backend, or switching to etnaviv.
Bug-AGL: SPEC-905
Change-Id: I9fc00e35c2eefee07998053e1fccec6265ac3b9e
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11305
Reviewed-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Matt Porter <mporter@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
bitbake does not know to track values that are found and used via
getVarFlags() without them being otherwise refernced and tracked in ways
that are otherwise caught. Further given that we use multiple levels of
varflags here we need to be explicit in their tracking. Add all
variables that we use to varflags where they are added to the metadata.
Bug-AGL: SPEC-939
Change-Id: I32cf16c4354d733e086c6ea9a845934beff94715
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11255
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-704
This is part of the fixe to make i.MX6 buildable again.
Following fixes are included in this change:
- adding build target imx6qsabreauto
- fixing qt5.8 build error
- refine bblayers.conf layer order (for dynamic-layers)
- meta-fsl-arm -> meta-freescale layer name change
- weston.ini lines (use fbdev-backend.so)
- /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules)
- kernel configuraion to include smack, etc.
Follwings are stil not addressed yet:
- bblayer.conf layer order still have issue re. dynamic-layers
- built and booted on imx6qsabreauto only yet.
following existing community boards may need update
(i have imx6qsabrelite, but no notrogen6x)
Note, this fix is prepared independently of nxp or fsl-community,
who should follow-up if there are mistakes to be fixed, or updates
that they find needed.
Update:
Refined on review comment regarding tune settings and
kernel configurations. The board successfully boots and shows
AGL homescreen.
But I found I still have problem with USB.
lsusb says 'unable to initialize libusb: -99' error which I am
still faling to find the cause.
Update2:
usb issue may be related to dtb configuration in linux-fslc-imx
better to be tracked separately
Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574
Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9871
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
Scott Murray
Bechir Mghirbi
Mihail Grigorov
Tom Rini
Takashi Matsuzawa