| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add imx8mqevk-viv machine template for i.MX8MQ EVK which uses the
default Vivante driver configuration in meta-freescale with the
new community linux-fslc-imx kernel. The following additional changes
have been made to support this:
- A linux-fslc-imx bbappend has been added to pull in the AGL kernel
configuration, and a imx8mq-evkb config fragment has been added to
enable the required Wifi driver for the updated EVKB board.
- Stale qtbase and weston-init bbappends/patches have been removed
from meta-agl-bsp/meta-freescale-layer.
- The meta-agl-profile-graphical Weston 8.0.0 bbappend has been
renamed to 8.0.% so the wildcard will apply it to meta-freescale's
weston_8.0.0.imx recipe.
Known issues:
- The required PipeWire configuration for the onboard audio needs
further investigation.
Bug-AGL: SPEC-3258
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I4ea5437ef0ea8bedb9dd2157f2822ff25ee56cff
|
|
Update imx6qdlsabreauto configuration to use open source etnaviv GPU
driver instead of Vivante. The previously required weston-ini-conf
has been removed as it is not required with etnaviv, and a bbappend
has been added for the linux-fslc kernel that this configuration uses
so it will pull in the AGL kernel bits. Additionally, the kernel
configuration for linux-fslc is tweaked with config fragments to
better match the other AGL platforms.
Bug-AGL: SPEC-1674, SPEC-2502
Change-Id: Ic40d310b48405ccc7d1435f0fc9f162a129cffe9
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
The imx6qsabreauto target was falling behind and could not be build for GG-7.0.
The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro.
However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets.
This patch makes the required changes to fix the imx6qsabreauto machine configuration:
- removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro
- updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer
- deletes reference to packagegroup-fscl-* not required to build AGL
- add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon'
v2 (jsmoeller): moved board name to match MACHINE
v3 (bechir.mghirbi):
- remove wayland_2.0.0 as weston_4.0.0.imx is used.
- use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard'
- Add CFG80211 Kernel configuration
Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc
Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
in case of using compositor-fbdev
Bug-AGL: SPEC-1192
Change-Id: If81cb3245fac01a32a97b02106ff23b65856d565
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
|
|
The missed flags causes a stop of transformation
SPEC-1192
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Change-Id: I601d2f35d2f73055187db827cc7687a25e4d4ece
|
|
Switch to constructing the weston.ini from fragments of files instead of
variables and variable flags. This allows for much easier tracking of
signatures by leveraging existing mechanisms. Update the Readme to
explain how to do the various operations with fragments as well. Note
that for QEMU we do not need to pass -show-cursor as it's already
provided and we do want to change the VGA driver to one that reliably
provides DRM support.
For the HDMI connected screens, rather than name them by vendor name
them first for connection and then required transformation for correct
orientation.
For board-specific options, move them to the board directories.
When we need to change existing cfg options, rather than replace them
the proper location to do this in is the do_configure function.
Bug-AGL: SPEC-964
Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
In Weston 2.0, the EGL support was dropped from the fbdev-backend,
as that was not the correct way to initialize EGL. However, the
vendor support patches in Weston 1.11 still require that functionality.
Restore the EGL support in the fbdev-backend, until the issue is
resolved, by either adding a standalone backend, or switching to etnaviv.
Bug-AGL: SPEC-905
Change-Id: I9fc00e35c2eefee07998053e1fccec6265ac3b9e
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11305
Reviewed-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Matt Porter <mporter@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
bitbake does not know to track values that are found and used via
getVarFlags() without them being otherwise refernced and tracked in ways
that are otherwise caught. Further given that we use multiple levels of
varflags here we need to be explicit in their tracking. Add all
variables that we use to varflags where they are added to the metadata.
Bug-AGL: SPEC-939
Change-Id: I32cf16c4354d733e086c6ea9a845934beff94715
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11255
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-704
This is part of the fixe to make i.MX6 buildable again.
Following fixes are included in this change:
- adding build target imx6qsabreauto
- fixing qt5.8 build error
- refine bblayers.conf layer order (for dynamic-layers)
- meta-fsl-arm -> meta-freescale layer name change
- weston.ini lines (use fbdev-backend.so)
- /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules)
- kernel configuraion to include smack, etc.
Follwings are stil not addressed yet:
- bblayer.conf layer order still have issue re. dynamic-layers
- built and booted on imx6qsabreauto only yet.
following existing community boards may need update
(i have imx6qsabrelite, but no notrogen6x)
Note, this fix is prepared independently of nxp or fsl-community,
who should follow-up if there are mistakes to be fixed, or updates
that they find needed.
Update:
Refined on review comment regarding tune settings and
kernel configurations. The board successfully boots and shows
AGL homescreen.
But I found I still have problem with USB.
lsusb says 'unable to initialize libusb: -99' error which I am
still faling to find the cause.
Update2:
usb issue may be related to dtb configuration in linux-fslc-imx
better to be tracked separately
Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574
Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9871
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
Scott Murray
Bechir Mghirbi
Mihail Grigorov
Tom Rini
Takashi Matsuzawa