aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-freescale-layer/recipes-graphics
AgeCommit message (Collapse)AuthorFilesLines
2021-08-23Convert to new override syntaxScott Murray2-6/+6
This is mostly the result of running a slightly customized version of the convert-overrides.py script from poky with additional overrides added. A few minor fixups were done by hand afterwards during a review of the changes. The intent of these changes is to minimize the effort to keep the "next" branch that builds against poky master up to date and tested in preparation for the switch to the next Yocto LTS release in early 2022. Bug-AGL: SPEC-4052 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-12meta-agl-core: Revise weston-ini-conf mechanismScott Murray1-3/+0
The recent layer reorganization broke the landscape vs portrait scheme based on bbappend'ing the weston-ini-conf recipe in the previous cluster and html5 demo layers. To fix this and to facilitate being able to easily build the mix of demo platform images, the weston.ini generation mechanism in the weston-ini-conf has been revised to build multiple packages. Instead of relying on SRC_URI to install weston.ini fragments into WORKDIR and grabbing all of them with a *.cfg glob, an explicit list built from new WESTON_FRAGMENTS and WESTON_DISPLAYS variables is used. The fragments listed in WESTON_FRAGMENTS are used to generate both weston-ini-conf and weston-ini-conf-landscape packages containing uniquely named files (weston.ini.default and weston.ini.landscape, respectively), and the OE update-alternatives mechanism is used to have weston.ini point at the appropriate file on installation. For now, the two packages are explicitly marked as incompatible with one another, but this could be tweaked in the future if switching between them on target is desired. Additional notes: - A RPROVIDES of "weston-ini" has been defined for the weston-ini-conf packages and a RDEPENDS on it added to weston-init. This should allow members to drop in a complete alternative solution while still having a dependency chain. - The various meta-agl-bsp bbappends of weston-ini-conf have for the most part been updated to yield the same behavior as before, though with an eye towards using machine overrides to ease multiconfig usage down the road. This includes the currently unused Raspberry Pi touchscreen support, which has been left since it may still see use. - An exception to the above, however, is that the support for the touchscreen on the dra7 EVM has been removed, as upstream dropped the support for the screen on the available test hardware and at present it only seems feasible to support external HDMI monitors. - The unused fbdev fragment used to support meta-freescale in the past has been removed. - The virtual and virtual-landscape fragments have been renamed to virtual-270 and virtual-0 to better indicate the orientation and match the naming used for the other fragments. It is likely that future work will need to split the display enabling and orientation aspects, as the current tying together of the two results in configurations somewhat overly specific to the actual AGL demo systems. Bug-AGL: SPEC-3745 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I2a968781182a346c1d483cca4fd7337679e58118 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25860 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-11meta-agl-bsp: Update i.MX8MQ EVK support for latest dunfellScott Murray1-0/+10
The layer updates to go to the latest 3.1.4 Yocto dunfell release broke the imx8mqevk and imx8mqevk-viv builds, though for different reasons. imx8mqevk fixes: - Remove the now upstreamed etnaviv kernel patches that had been backported by Walter. - Turn off btrfs support in the linux-fslc-imx kernel configuration. This is required due to meta-freescale having a 5.4 kernel new enough to need a lttng-modules fix for btrfs that has not yet been backported from the Yocto master branch to dunfell. - Update the PREFERRED_VERSION over-rides in agl_imx8mqevk.inc to match the new versions of libdrm and gstreamer in poky. imx8mqevk-viv fixes: - Add weston_8.0.0.imx.bbappend to work around the broken addition of a PACKAGECONFIG_remove of "x11 wayland" in the recipe in meta-freescale. Upstream will be engaged to drive getting the change reverted. Bug-AGL: SPEC-3725 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I259f2d048a9de653a0060afcef17c4410093783a Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25772 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2020-08-19Add imx8mqevk machine that uses etnavivScott Murray2-0/+44
To enable debugging/development of the etnaviv driver against the GC7000L GPU in the i.MX8MQ, add a "imx8mqevk" template that uses etnaviv instead of Vivante. Since there seem to be some issues with respect to GPU hangs and resulting graphical corruption, the existing "imx8mqevk-viv" template that uses Vivante has been retained for now. Bug-AGL: SPEC-3520 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: If5b84c6021994cce0f30410985b1ec4678e718ef Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25058 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-05-12Add i.MX8MQ EVK supportScott Murray1-1/+0
Add imx8mqevk-viv machine template for i.MX8MQ EVK which uses the default Vivante driver configuration in meta-freescale with the new community linux-fslc-imx kernel. The following additional changes have been made to support this: - A linux-fslc-imx bbappend has been added to pull in the AGL kernel configuration, and a imx8mq-evkb config fragment has been added to enable the required Wifi driver for the updated EVKB board. - Stale qtbase and weston-init bbappends/patches have been removed from meta-agl-bsp/meta-freescale-layer. - The meta-agl-profile-graphical Weston 8.0.0 bbappend has been renamed to 8.0.% so the wildcard will apply it to meta-freescale's weston_8.0.0.imx recipe. Known issues: - The required PipeWire configuration for the onboard audio needs further investigation. Bug-AGL: SPEC-3258 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I4ea5437ef0ea8bedb9dd2157f2822ff25ee56cff
2019-06-20meta-agl-bsp: Changes to get imx6qdlsabreauto working with etnavivScott Murray1-11/+0
Update imx6qdlsabreauto configuration to use open source etnaviv GPU driver instead of Vivante. The previously required weston-ini-conf has been removed as it is not required with etnaviv, and a bbappend has been added for the linux-fslc kernel that this configuration uses so it will pull in the AGL kernel bits. Additionally, the kernel configuration for linux-fslc is tweaked with config fragments to better match the other AGL platforms. Bug-AGL: SPEC-1674, SPEC-2502 Change-Id: Ic40d310b48405ccc7d1435f0fc9f162a129cffe9 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-04-23Fix imx6qdlsabreauto machine configurationBechir Mghirbi5-441/+0
The imx6qsabreauto target was falling behind and could not be build for GG-7.0. The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro. However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets. This patch makes the required changes to fix the imx6qsabreauto machine configuration: - removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro - updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer - deletes reference to packagegroup-fscl-* not required to build AGL - add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon' v2 (jsmoeller): moved board name to match MACHINE v3 (bechir.mghirbi): - remove wayland_2.0.0 as weston_4.0.0.imx is used. - use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard' - Add CFG80211 Kernel configuration Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-02-14meta-agl-bsp: weston: flags of events must be keptMihail Grigorov1-11/+51
in case of using compositor-fbdev Bug-AGL: SPEC-1192 Change-Id: If81cb3245fac01a32a97b02106ff23b65856d565 Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
2018-01-10i.MX6: weston: Fix for missing flagsMihail Grigorov2-0/+14
The missed flags causes a stop of transformation SPEC-1192 Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Change-Id: I601d2f35d2f73055187db827cc7687a25e4d4ece
2017-10-20weston-ini-conf: Rework to use fragments to construct weston.iniTom Rini2-5/+9
Switch to constructing the weston.ini from fragments of files instead of variables and variable flags. This allows for much easier tracking of signatures by leveraging existing mechanisms. Update the Readme to explain how to do the various operations with fragments as well. Note that for QEMU we do not need to pass -show-cursor as it's already provided and we do want to change the VGA driver to one that reliably provides DRM support. For the HDMI connected screens, rather than name them by vendor name them first for connection and then required transformation for correct orientation. For board-specific options, move them to the board directories. When we need to change existing cfg options, rather than replace them the proper location to do this in is the do_configure function. Bug-AGL: SPEC-964 Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-14meta-agl-bsp: imx6: Add EGL support for iMX6 in Weston 2.0Mihail Grigorov5-0/+388
In Weston 2.0, the EGL support was dropped from the fbdev-backend, as that was not the correct way to initialize EGL. However, the vendor support patches in Weston 1.11 still require that functionality. Restore the EGL support in the fbdev-backend, until the issue is resolved, by either adding a standalone backend, or switching to etnaviv. Bug-AGL: SPEC-905 Change-Id: I9fc00e35c2eefee07998053e1fccec6265ac3b9e Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11305 Reviewed-by: Leon Anavi <leon.anavi@konsulko.com> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Matt Porter <mporter@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-12weston-ini-conf: Make this track variables correctly for signaturesTom Rini1-0/+1
bitbake does not know to track values that are found and used via getVarFlags() without them being otherwise refernced and tracked in ways that are otherwise caught. Further given that we use multiple levels of varflags here we need to be explicit in their tracking. Add all variables that we use to varflags where they are added to the metadata. Bug-AGL: SPEC-939 Change-Id: I32cf16c4354d733e086c6ea9a845934beff94715 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11255 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-30Fix i.MX6Takashi Matsuzawa1-0/+9
Bug-AGL: SPEC-704 This is part of the fixe to make i.MX6 buildable again. Following fixes are included in this change: - adding build target imx6qsabreauto - fixing qt5.8 build error - refine bblayers.conf layer order (for dynamic-layers) - meta-fsl-arm -> meta-freescale layer name change - weston.ini lines (use fbdev-backend.so) - /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules) - kernel configuraion to include smack, etc. Follwings are stil not addressed yet: - bblayer.conf layer order still have issue re. dynamic-layers - built and booted on imx6qsabreauto only yet. following existing community boards may need update (i have imx6qsabrelite, but no notrogen6x) Note, this fix is prepared independently of nxp or fsl-community, who should follow-up if there are mistakes to be fixed, or updates that they find needed. Update: Refined on review comment regarding tune settings and kernel configurations. The board successfully boots and shows AGL homescreen. But I found I still have problem with USB. lsusb says 'unable to initialize libusb: -99' error which I am still faling to find the cause. Update2: usb issue may be related to dtb configuration in linux-fslc-imx better to be tracked separately Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574 Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9871 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>