summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-freescale-layer/recipes-kernel/linux
AgeCommit message (Collapse)AuthorFilesLines
2024-05-02meta-agl-bsp: NXP i.MX6 and i.MX8 fixesScott Murray2-27/+4
These changes should allow the etnaviv GPU driver using NXP i.MX6 and i.MX8 machines (e.g. cubox-i, imx8mq-evk) to build. Testing on hardware is required for the i.MX6, and etnaviv does not seem to be working on the i.MX8MQ-EVK as the previous devicetree tweak being used no longer seems applicable. Further investigation will be done in the near future as time permits. Notable changes: - The i.MX6 configurations have been switched to using the linux-fslc kernel instead of linux-fslc-lts, as the latter is older (6.1 vs 6.6). - The kernel patch against linux-fslc-imx to enable the MHDP driver when using etnaviv has been removed since it is no longer required. - The local workaround to allow enabling the "wayland" PACKAGECONFIG when building weston-imx has been replaced with use of the now provided upstream variable that allows that. Note that building with this version of Weston has not been tested since it is tied to using the Vivante GPU driver. Bug-AGL: SPEC-5122 Change-Id: I75810dd152197f9435158839fad00327ed7e42e7 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29878 ci-image-build: Jenkins Job builder account Tested-by: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2023-05-30Fix up i.MX8MQ EVK configurationScott Murray6-49/+35
Changes: - Since linux-fslc-lts does not boot on the EVK at the moment, and both it and linux-fslc still do not have support for the HDMI output, switch back to using linux-fslc-imx with tweaks to use etnaviv as we did pre-kirkstone. - A bbappend has been added for linux-fslc-lts since that was missed in a previous upgrade, and even though we are not using it now, it is possibly useful for other i.MX variants. - A machine template for using the NXP BSP with the Vivante GPU driver, imx8mq-evk-viv, has been restored, as testing shows it now works with the current panel-less homescreens. As before, the intent of this configuration is for testing or as an example of potential production use of meta-freescale where NXP support is available. - Start up of Bluetooth support has been disabled, as it currently causes kernel oopses or panics (both have been seen in testing). This happens with both machine templates. SPEC-4807 has been opened to track this issue. Bug-AGL: SPEC-4799 Change-Id: I38e4e720643714541efb0fed08d5ab64545bb02d Signed-off-by: Scott Murray <scott.murray@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28925 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-11-04Prepare master for new framework integrationJan-Simon Moeller1-49/+0
During the last workshop the transition to the new framework was presented. This change essentially deprecates the SMACK-based application framework. To prepare the integration of it, we remove the deprecated components: - meta-agl-core: remove Smack kernel patches - meta-app-framework - meta-pipewire/dynamic-layers/meta-app-framework/ v2: rebased Bug-AGL: SPEC-4121 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Icdaeadfb5d2193f3a4c535168c88da6073423e67 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26752
2021-08-23Convert to new override syntaxScott Murray2-6/+6
This is mostly the result of running a slightly customized version of the convert-overrides.py script from poky with additional overrides added. A few minor fixups were done by hand afterwards during a review of the changes. The intent of these changes is to minimize the effort to keep the "next" branch that builds against poky master up to date and tested in preparation for the switch to the next Yocto LTS release in early 2022. Bug-AGL: SPEC-4052 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-29Refactor kernel configuration fragment handlingScott Murray2-31/+23
Refactor the kernel configuration fragment handling to shift all AGL applied configuration fragments into a new AGL_KCONFIG_FRAGMENTS variable that is used to generate SRC_URI and KERNEL_CONFIG_FRAGMENTS additions for the various BSPs. The intent is to make it simple to disable AGL provided configuration in downstream builds as the IC EG has expressed as a requirement. Additionally, the rework has allowed for some clean up of accumulated cruft. In practice, clearing AGL_KCONFIG_FRAGMENTS drops all non-BSP provided kernel configuration with the exception of some qemu BSP related additions required for AGL CI and some explicitly configurable things like netboot support. Notable changes: - Instead of always using AGL's own fragment merging logic on top of the BSP kernel recipe, an effort is now made to leverage the BSP recipes' own merging schemes, so there are now separate include files for kernel-yocto.bbclass and plain kernel.bbclass based kernel recipes, as well as a common include file that defines the AGL_KCONFIG_FRAGMENTS variable and its derivations. That file can be included directly in bbappends for BSP kernel recipes that use the KERNEL_CONFIG_FRAGMENTS scheme (e.g. meta-ti, meta-qcom). - The SMACK enabling configuration in meta-app-framework has been updated to supply different fragments for enabling SMACK by default for 4.x and 5.x kernels. This removes a warning from always supplying the old configuration, and allows providing a CONFIG_LSM definition to ensure over-riding any BSP modifications. This allows removing the previous hack to handle CONFIG_LSM being set in the defconfigs in linux-raspberrypi. - By request, the linux-yocto support from meta-agl-bsp/meta-core has been rationalized into meta-agl-core to improve the experience when using meta-agl-core standalone for testing. - All demo supporting kernel configuration has been removed, a subsequent change to meta-agl-demo will add it there by leveraging AGL_KCONFIG_FRAGMENTS. - The hardware device support has been split out of the can-bus.cfg fragment, in favor of shifting it to meta-agl-demo. A few other stray non-CAN configuration options have also been removed from can-bus.cfg, as they do not seem to be required. Bug-AGL: SPEC-3983 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: If6662fd36e26cec767b1d53b1188a74d01ef9dcf Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26460 Reviewed-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2020-12-11meta-agl-bsp: Update i.MX8MQ EVK support for latest dunfellScott Murray4-203/+1
The layer updates to go to the latest 3.1.4 Yocto dunfell release broke the imx8mqevk and imx8mqevk-viv builds, though for different reasons. imx8mqevk fixes: - Remove the now upstreamed etnaviv kernel patches that had been backported by Walter. - Turn off btrfs support in the linux-fslc-imx kernel configuration. This is required due to meta-freescale having a 5.4 kernel new enough to need a lttng-modules fix for btrfs that has not yet been backported from the Yocto master branch to dunfell. - Update the PREFERRED_VERSION over-rides in agl_imx8mqevk.inc to match the new versions of libdrm and gstreamer in poky. imx8mqevk-viv fixes: - Add weston_8.0.0.imx.bbappend to work around the broken addition of a PACKAGECONFIG_remove of "x11 wayland" in the recipe in meta-freescale. Upstream will be engaged to drive getting the change reverted. Bug-AGL: SPEC-3725 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I259f2d048a9de653a0060afcef17c4410093783a Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25772 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2020-08-31linux-fslc-imx: Backport mainline patches to fix GPU hangsWalter Lozano3-0/+203
Initial tests of AGL with etnaviv showed random GPU hangs. After discussion add some mainline patches not yet present in linux-fslc-imx in order to fix them. BUG-AGL: SPEC-3520 Signed-off-by: Walter Lozano <walter.lozano@collabora.com> Change-Id: I8ac51e7ec91fa033554270cd79ca1b55c5862103 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25163 Reviewed-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-08-19Add imx8mqevk machine that uses etnavivScott Murray4-1/+63
To enable debugging/development of the etnaviv driver against the GC7000L GPU in the i.MX8MQ, add a "imx8mqevk" template that uses etnaviv instead of Vivante. Since there seem to be some issues with respect to GPU hangs and resulting graphical corruption, the existing "imx8mqevk-viv" template that uses Vivante has been retained for now. Bug-AGL: SPEC-3520 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: If5b84c6021994cce0f30410985b1ec4678e718ef Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25058 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Walter Lozano <walter.lozano@collabora.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-05-12Add i.MX8MQ EVK supportScott Murray2-0/+25
Add imx8mqevk-viv machine template for i.MX8MQ EVK which uses the default Vivante driver configuration in meta-freescale with the new community linux-fslc-imx kernel. The following additional changes have been made to support this: - A linux-fslc-imx bbappend has been added to pull in the AGL kernel configuration, and a imx8mq-evkb config fragment has been added to enable the required Wifi driver for the updated EVKB board. - Stale qtbase and weston-init bbappends/patches have been removed from meta-agl-bsp/meta-freescale-layer. - The meta-agl-profile-graphical Weston 8.0.0 bbappend has been renamed to 8.0.% so the wildcard will apply it to meta-freescale's weston_8.0.0.imx recipe. Known issues: - The required PipeWire configuration for the onboard audio needs further investigation. Bug-AGL: SPEC-3258 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I4ea5437ef0ea8bedb9dd2157f2822ff25ee56cff
2020-04-27meta-agl-bsp: remove obsolete linux-fslc-imx bbappendScott Murray1-23/+0
meta-freescale has removed the linux-fslc-imx recipe in its master and dunfell branches, so remove the local bbappend to avoid parse errors. That kernel is currently not used by any machine template in-tree, so there should be no impact. Bug-AGL: SPEC-3302 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Iea9a5ae11ef90f5ce217ac5b379b133c6d0948a8
2019-06-20Add cubox-i and nitrogen6x i.MX6 machinesScott Murray1-0/+5
Add the cubox-i (covering SolidRun Cubox-i, Hummingboard Gate and Edge), and nitrogen6x (covering Nitrogen 6x and SABRE Lite) machine definitions. Note that support for the Broadcom Bluetooth chipset on the SolidRun i.MX6 SOM is currently missing, as it requires firmware that is not available in either the linux-firmware package or from the firmware packages provided by meta-freescale. Bug-AGL: SPEC-2517 Change-Id: If7bdb9f1af9bb67dba5c1ff836a6d3b04160fefd Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-06-20meta-agl-bsp: Changes to get imx6qdlsabreauto working with etnavivScott Murray3-3/+38
Update imx6qdlsabreauto configuration to use open source etnaviv GPU driver instead of Vivante. The previously required weston-ini-conf has been removed as it is not required with etnaviv, and a bbappend has been added for the linux-fslc kernel that this configuration uses so it will pull in the AGL kernel bits. Additionally, the kernel configuration for linux-fslc is tweaked with config fragments to better match the other AGL platforms. Bug-AGL: SPEC-1674, SPEC-2502 Change-Id: Ic40d310b48405ccc7d1435f0fc9f162a129cffe9 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-04-23Fix imx6qdlsabreauto machine configurationBechir Mghirbi2-0/+6
The imx6qsabreauto target was falling behind and could not be build for GG-7.0. The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro. However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets. This patch makes the required changes to fix the imx6qsabreauto machine configuration: - removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro - updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer - deletes reference to packagegroup-fscl-* not required to build AGL - add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon' v2 (jsmoeller): moved board name to match MACHINE v3 (bechir.mghirbi): - remove wayland_2.0.0 as weston_4.0.0.imx is used. - use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard' - Add CFG80211 Kernel configuration Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-02-13Rename smack OVERRIDE to with-lsm-smackJosé Bollo1-1/+1
Using the OVERRIDE "smack" came with the use of the layer meta-intel-iot-security. When switching to meta-security, it conflicts with the package name 'smack' that provide the smack user library. Yocto was reporting the following error: ERROR: .../meta-security/recipes-security/smack/smack_1.3.0.bb: QA Issue: Recipe .../meta-security/recipes-security/smack/smack_1.3.0.bb has PN of "smack" which is in OVERRIDES, this can result in unexpected behaviour. [pn-overrides] Change-Id: Id71b283bf1ce5682bd94bf96595eb32506acb1d5 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2017-11-22Rework Linux Kernel fragment applicationsTom Rini5-110/+1
- All kernel recipes must inherit linux-agl.inc - All kernel recipes for a given version (e.g. 4.9) should include linux-VER-agl.inc in order to avoid duplication (such as the SMACK label patch or security fixes) - We enforce having merge_config.sh be invoked at the end, in order to make sure fragments will be applied. - Add a new fragment for Raspberry Pi to ensure the Pi Touchscreen is still enabled. With all of the above, we fix a number of minor issues as well, such as platforms manually enabling NBD/RAMDISK for netboot as the previous logic was not working in all cases. Bug-AGL: SPEC-946 Change-Id: Ic688e899df5861d83712af12d8e1c6c3c9643300 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12063 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: José Bollo <jobol@nonadev.net> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-11-08meta-agl-bsp: kernel: remove linux-boundary defconfig from meta-freescale-layer.Mihail Grigorov2-457/+0
Its do not needed anymore here, because we started to using meta-boundary layer Bug-AGL: SPEC-905 Change-Id: I179ac8747fe24293be89d3138f54589511ed2b63 Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11749 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-28Add joystick.cfg for usb joystick and steering-wheel kernel configurezheng_wenlong1-0/+3
Add joystick.cfg into meta-agl-bsp/recipes-kernel, Then include this cfg in each board bbappend. Related commit: https://gerrit.automotivelinux.org/gerrit/#/c/10463/ Change-Id: Ie484cc8017e7198cefa0d8e7476032c325a8348d Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11575 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-14meta-agl-bsp: imx6: Add new defconfig for the linux-boundary kernelMihail Grigorov2-0/+457
The default configuration for the linux-boundary kernel uses AppArmor, but we want to use Smack. * Switch from using AppArmor to Smack * Enable CONFIG_HID_MULTITOUCH Bug-AGL: SPEC-905 Change-Id: Idfcad0ea4c242c30df97407a31661e02df710b2e Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com> Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11311 Reviewed-by: Leon Anavi <leon.anavi@konsulko.com> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by: Matt Porter <mporter@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-09-18Add uvc.cfg for usb video class kernel configurezheng_wenlong1-0/+2
Add uvc.cfg into meta-agl-bsp/recipes-kernel, Then include this cfg in each board bbappend. See: https://gerrit.automotivelinux.org/gerrit/#/c/10803/ Change-Id: I5faebefef3560a27496103e1ad4a1ca70377a1ba Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10893 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-06-30Fix i.MX6Takashi Matsuzawa10-0/+198
Bug-AGL: SPEC-704 This is part of the fixe to make i.MX6 buildable again. Following fixes are included in this change: - adding build target imx6qsabreauto - fixing qt5.8 build error - refine bblayers.conf layer order (for dynamic-layers) - meta-fsl-arm -> meta-freescale layer name change - weston.ini lines (use fbdev-backend.so) - /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules) - kernel configuraion to include smack, etc. Follwings are stil not addressed yet: - bblayer.conf layer order still have issue re. dynamic-layers - built and booted on imx6qsabreauto only yet. following existing community boards may need update (i have imx6qsabrelite, but no notrogen6x) Note, this fix is prepared independently of nxp or fsl-community, who should follow-up if there are mistakes to be fixed, or updates that they find needed. Update: Refined on review comment regarding tune settings and kernel configurations. The board successfully boots and shows AGL homescreen. But I found I still have problem with USB. lsusb says 'unable to initialize libusb: -99' error which I am still faling to find the cause. Update2: usb issue may be related to dtb configuration in linux-fslc-imx better to be tracked separately Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574 Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9871 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>