| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Changes:
- Since linux-fslc-lts does not boot on the EVK at the moment,
and both it and linux-fslc still do not have support for the
HDMI output, switch back to using linux-fslc-imx with tweaks
to use etnaviv as we did pre-kirkstone.
- A bbappend has been added for linux-fslc-lts since that was
missed in a previous upgrade, and even though we are not using
it now, it is possibly useful for other i.MX variants.
- A machine template for using the NXP BSP with the Vivante GPU
driver, imx8mq-evk-viv, has been restored, as testing shows it
now works with the current panel-less homescreens. As before,
the intent of this configuration is for testing or as an example
of potential production use of meta-freescale where NXP support
is available.
- Start up of Bluetooth support has been disabled, as it currently
causes kernel oopses or panics (both have been seen in testing).
This happens with both machine templates. SPEC-4807 has been
opened to track this issue.
Bug-AGL: SPEC-4799
Change-Id: I38e4e720643714541efb0fed08d5ab64545bb02d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28937
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Rename machine template and related files to use imx8mq-evk instead
of imx8mqevk to match meta-freescale change.
- Switch to purely using the default "mainline" BSP configuration in
meta-freescale for imx8mq-evk as opposed to the tweaking of the
"nxp" configuration previously used. The mainline configuration now
builds a working image, and this lowers maintenance on our part.
- Remove imx8mqevk-viv configuration to build with Vivante GPU driver.
NXP have not yet released Weston 10 support, and at this point the
etnaviv driver is stable. If a demonstration of support of Vivante
is requested in the future (e.g. for other i.MX8 variants that still
require it), this can be revisited.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I7e279268463f68978ecd2990927aab6d64e3cbd2
|
|
During the last workshop the transition to the new framework was presented.
This change essentially deprecates the SMACK-based application framework.
To prepare the integration of it, we remove the deprecated components:
- meta-agl-core: remove Smack kernel patches
- meta-app-framework
- meta-pipewire/dynamic-layers/meta-app-framework/
v2: rebased
Bug-AGL: SPEC-4121
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: Icdaeadfb5d2193f3a4c535168c88da6073423e67
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26752
|
|
This is mostly the result of running a slightly customized version
of the convert-overrides.py script from poky with additional
overrides added. A few minor fixups were done by hand afterwards
during a review of the changes.
The intent of these changes is to minimize the effort to keep the
"next" branch that builds against poky master up to date and tested
in preparation for the switch to the next Yocto LTS release in
early 2022.
Bug-AGL: SPEC-4052
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Refactor the kernel configuration fragment handling to shift all AGL
applied configuration fragments into a new AGL_KCONFIG_FRAGMENTS
variable that is used to generate SRC_URI and KERNEL_CONFIG_FRAGMENTS
additions for the various BSPs. The intent is to make it simple to
disable AGL provided configuration in downstream builds as the IC EG
has expressed as a requirement. Additionally, the rework has allowed
for some clean up of accumulated cruft.
In practice, clearing AGL_KCONFIG_FRAGMENTS drops all non-BSP provided
kernel configuration with the exception of some qemu BSP related
additions required for AGL CI and some explicitly configurable things
like netboot support.
Notable changes:
- Instead of always using AGL's own fragment merging logic on top of
the BSP kernel recipe, an effort is now made to leverage the BSP
recipes' own merging schemes, so there are now separate include
files for kernel-yocto.bbclass and plain kernel.bbclass based kernel
recipes, as well as a common include file that defines the
AGL_KCONFIG_FRAGMENTS variable and its derivations. That file can
be included directly in bbappends for BSP kernel recipes that use
the KERNEL_CONFIG_FRAGMENTS scheme (e.g. meta-ti, meta-qcom).
- The SMACK enabling configuration in meta-app-framework has been
updated to supply different fragments for enabling SMACK by default
for 4.x and 5.x kernels. This removes a warning from always
supplying the old configuration, and allows providing a CONFIG_LSM
definition to ensure over-riding any BSP modifications.
This allows removing the previous hack to handle CONFIG_LSM being
set in the defconfigs in linux-raspberrypi.
- By request, the linux-yocto support from meta-agl-bsp/meta-core has
been rationalized into meta-agl-core to improve the experience when
using meta-agl-core standalone for testing.
- All demo supporting kernel configuration has been removed, a
subsequent change to meta-agl-demo will add it there by leveraging
AGL_KCONFIG_FRAGMENTS.
- The hardware device support has been split out of the can-bus.cfg
fragment, in favor of shifting it to meta-agl-demo. A few other
stray non-CAN configuration options have also been removed from
can-bus.cfg, as they do not seem to be required.
Bug-AGL: SPEC-3983
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: If6662fd36e26cec767b1d53b1188a74d01ef9dcf
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26460
Reviewed-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
The recent layer reorganization broke the landscape vs portrait scheme
based on bbappend'ing the weston-ini-conf recipe in the previous cluster
and html5 demo layers. To fix this and to facilitate being able to
easily build the mix of demo platform images, the weston.ini generation
mechanism in the weston-ini-conf has been revised to build multiple
packages.
Instead of relying on SRC_URI to install weston.ini fragments into
WORKDIR and grabbing all of them with a *.cfg glob, an explicit list
built from new WESTON_FRAGMENTS and WESTON_DISPLAYS variables is used.
The fragments listed in WESTON_FRAGMENTS are used to generate both
weston-ini-conf and weston-ini-conf-landscape packages containing
uniquely named files (weston.ini.default and weston.ini.landscape,
respectively), and the OE update-alternatives mechanism is used to have
weston.ini point at the appropriate file on installation. For now, the
two packages are explicitly marked as incompatible with one another,
but this could be tweaked in the future if switching between them on
target is desired.
Additional notes:
- A RPROVIDES of "weston-ini" has been defined for the weston-ini-conf
packages and a RDEPENDS on it added to weston-init. This should
allow members to drop in a complete alternative solution while still
having a dependency chain.
- The various meta-agl-bsp bbappends of weston-ini-conf have for the
most part been updated to yield the same behavior as before, though
with an eye towards using machine overrides to ease multiconfig usage
down the road. This includes the currently unused Raspberry Pi
touchscreen support, which has been left since it may still see use.
- An exception to the above, however, is that the support for the
touchscreen on the dra7 EVM has been removed, as upstream dropped the
support for the screen on the available test hardware and at present
it only seems feasible to support external HDMI monitors.
- The unused fbdev fragment used to support meta-freescale in the past
has been removed.
- The virtual and virtual-landscape fragments have been renamed to
virtual-270 and virtual-0 to better indicate the orientation and match
the naming used for the other fragments. It is likely that future
work will need to split the display enabling and orientation aspects,
as the current tying together of the two results in configurations
somewhat overly specific to the actual AGL demo systems.
Bug-AGL: SPEC-3745
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I2a968781182a346c1d483cca4fd7337679e58118
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25860
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Remove explicit "not set" options in btusb.cfg kernel configuration
fragment to avoid over-riding BSP configuration.
- Add helper script and systemd unit to detect HCI UART device on
i.MX8MQ EVK and EVKB and run hciattach as necessary. While logic
has been added for the QCA6174 on the i.MX8MQ EVK, note that it has
not been tested due to lack of hardware availability to test.
Bug-AGL: SPEC-3545, SPEC-3681
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Iae3a58ccfbdb31698ae012ab7d03c9259ac83013
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25842
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
The layer updates to go to the latest 3.1.4 Yocto dunfell release
broke the imx8mqevk and imx8mqevk-viv builds, though for different
reasons.
imx8mqevk fixes:
- Remove the now upstreamed etnaviv kernel patches that had been
backported by Walter.
- Turn off btrfs support in the linux-fslc-imx kernel configuration.
This is required due to meta-freescale having a 5.4 kernel new
enough to need a lttng-modules fix for btrfs that has not yet been
backported from the Yocto master branch to dunfell.
- Update the PREFERRED_VERSION over-rides in agl_imx8mqevk.inc to
match the new versions of libdrm and gstreamer in poky.
imx8mqevk-viv fixes:
- Add weston_8.0.0.imx.bbappend to work around the broken addition
of a PACKAGECONFIG_remove of "x11 wayland" in the recipe in
meta-freescale. Upstream will be engaged to drive getting the
change reverted.
Bug-AGL: SPEC-3725
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I259f2d048a9de653a0060afcef17c4410093783a
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25772
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Initial tests of AGL with etnaviv showed random GPU hangs. After
discussion add some mainline patches not yet present in linux-fslc-imx
in order to fix them.
BUG-AGL: SPEC-3520
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Change-Id: I8ac51e7ec91fa033554270cd79ca1b55c5862103
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25163
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
To enable debugging/development of the etnaviv driver against the
GC7000L GPU in the i.MX8MQ, add a "imx8mqevk" template that uses
etnaviv instead of Vivante. Since there seem to be some issues
with respect to GPU hangs and resulting graphical corruption, the
existing "imx8mqevk-viv" template that uses Vivante has been
retained for now.
Bug-AGL: SPEC-3520
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: If5b84c6021994cce0f30410985b1ec4678e718ef
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25058
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Walter Lozano <walter.lozano@collabora.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add imx8mqevk-viv machine template for i.MX8MQ EVK which uses the
default Vivante driver configuration in meta-freescale with the
new community linux-fslc-imx kernel. The following additional changes
have been made to support this:
- A linux-fslc-imx bbappend has been added to pull in the AGL kernel
configuration, and a imx8mq-evkb config fragment has been added to
enable the required Wifi driver for the updated EVKB board.
- Stale qtbase and weston-init bbappends/patches have been removed
from meta-agl-bsp/meta-freescale-layer.
- The meta-agl-profile-graphical Weston 8.0.0 bbappend has been
renamed to 8.0.% so the wildcard will apply it to meta-freescale's
weston_8.0.0.imx recipe.
Known issues:
- The required PipeWire configuration for the onboard audio needs
further investigation.
Bug-AGL: SPEC-3258
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I4ea5437ef0ea8bedb9dd2157f2822ff25ee56cff
|
|
meta-freescale has removed the linux-fslc-imx recipe in its master
and dunfell branches, so remove the local bbappend to avoid parse
errors. That kernel is currently not used by any machine template
in-tree, so there should be no impact.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Iea9a5ae11ef90f5ce217ac5b379b133c6d0948a8
|
|
Add the cubox-i (covering SolidRun Cubox-i, Hummingboard Gate and
Edge), and nitrogen6x (covering Nitrogen 6x and SABRE Lite) machine
definitions.
Note that support for the Broadcom Bluetooth chipset on the SolidRun
i.MX6 SOM is currently missing, as it requires firmware that is not
available in either the linux-firmware package or from the firmware
packages provided by meta-freescale.
Bug-AGL: SPEC-2517
Change-Id: If7bdb9f1af9bb67dba5c1ff836a6d3b04160fefd
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Update imx6qdlsabreauto configuration to use open source etnaviv GPU
driver instead of Vivante. The previously required weston-ini-conf
has been removed as it is not required with etnaviv, and a bbappend
has been added for the linux-fslc kernel that this configuration uses
so it will pull in the AGL kernel bits. Additionally, the kernel
configuration for linux-fslc is tweaked with config fragments to
better match the other AGL platforms.
Bug-AGL: SPEC-1674, SPEC-2502
Change-Id: Ic40d310b48405ccc7d1435f0fc9f162a129cffe9
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
The imx6qsabreauto target was falling behind and could not be build for GG-7.0.
The commit 808fff5 from 'AGL-repo' removed reference to external repos meta-freescale-3rdparty and meta-freescale-distro.
However 'meta-agl' was not updated to follow up on this change which broke configuration for imx6 based targets.
This patch makes the required changes to fix the imx6qsabreauto machine configuration:
- removes reference to deleted layers: meta-freescale-3rdparty and meta-freescale-distro
- updates MACHINE value to imx6qdlsabreauto as defined in meta-freescale layer
- deletes reference to packagegroup-fscl-* not required to build AGL
- add "agl-medium-arm-compiler" to DISTRO_FEATURES so DEFAULTTUNE is correctly set to 'armv7athf-neon'
v2 (jsmoeller): moved board name to match MACHINE
v3 (bechir.mghirbi):
- remove wayland_2.0.0 as weston_4.0.0.imx is used.
- use default IMAGE_FSTYPES as bitbake is complaining that no IMAGE_CMD defined for IMAGE_FSTYPES entry 'sdcard'
- Add CFG80211 Kernel configuration
Change-Id: Ib8b1d254972c737725247a5b13ce333e8ef9d4dc
Signed-off-by: Bechir Mghirbi <bechir.mghirbi@grammer.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
|
|
in case of using compositor-fbdev
Bug-AGL: SPEC-1192
Change-Id: If81cb3245fac01a32a97b02106ff23b65856d565
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
|
|
Using the OVERRIDE "smack" came with the use of
the layer meta-intel-iot-security.
When switching to meta-security, it conflicts with the
package name 'smack' that provide the smack user library.
Yocto was reporting the following error:
ERROR: .../meta-security/recipes-security/smack/smack_1.3.0.bb:
QA Issue: Recipe .../meta-security/recipes-security/smack/smack_1.3.0.bb
has PN of "smack" which is in OVERRIDES, this can result
in unexpected behaviour. [pn-overrides]
Change-Id: Id71b283bf1ce5682bd94bf96595eb32506acb1d5
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
The missed flags causes a stop of transformation
SPEC-1192
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Change-Id: I601d2f35d2f73055187db827cc7687a25e4d4ece
|
|
- All kernel recipes must inherit linux-agl.inc
- All kernel recipes for a given version (e.g. 4.9) should include
linux-VER-agl.inc in order to avoid duplication (such as the SMACK
label patch or security fixes)
- We enforce having merge_config.sh be invoked at the end, in order to
make sure fragments will be applied.
- Add a new fragment for Raspberry Pi to ensure the Pi Touchscreen is
still enabled.
With all of the above, we fix a number of minor issues as well, such as
platforms manually enabling NBD/RAMDISK for netboot as the previous
logic was not working in all cases.
Bug-AGL: SPEC-946
Change-Id: Ic688e899df5861d83712af12d8e1c6c3c9643300
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12063
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: José Bollo <jobol@nonadev.net>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Its do not needed anymore here, because we started to using meta-boundary layer
Bug-AGL: SPEC-905
Change-Id: I179ac8747fe24293be89d3138f54589511ed2b63
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11749
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add joystick.cfg into meta-agl-bsp/recipes-kernel,
Then include this cfg in each board bbappend.
Related commit:
https://gerrit.automotivelinux.org/gerrit/#/c/10463/
Change-Id: Ie484cc8017e7198cefa0d8e7476032c325a8348d
Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11575
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Switch to constructing the weston.ini from fragments of files instead of
variables and variable flags. This allows for much easier tracking of
signatures by leveraging existing mechanisms. Update the Readme to
explain how to do the various operations with fragments as well. Note
that for QEMU we do not need to pass -show-cursor as it's already
provided and we do want to change the VGA driver to one that reliably
provides DRM support.
For the HDMI connected screens, rather than name them by vendor name
them first for connection and then required transformation for correct
orientation.
For board-specific options, move them to the board directories.
When we need to change existing cfg options, rather than replace them
the proper location to do this in is the do_configure function.
Bug-AGL: SPEC-964
Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
In Weston 2.0, the EGL support was dropped from the fbdev-backend,
as that was not the correct way to initialize EGL. However, the
vendor support patches in Weston 1.11 still require that functionality.
Restore the EGL support in the fbdev-backend, until the issue is
resolved, by either adding a standalone backend, or switching to etnaviv.
Bug-AGL: SPEC-905
Change-Id: I9fc00e35c2eefee07998053e1fccec6265ac3b9e
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11305
Reviewed-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Matt Porter <mporter@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The default configuration for the linux-boundary kernel uses AppArmor,
but we want to use Smack.
* Switch from using AppArmor to Smack
* Enable CONFIG_HID_MULTITOUCH
Bug-AGL: SPEC-905
Change-Id: Idfcad0ea4c242c30df97407a31661e02df710b2e
Signed-off-by: Mihail Grigorov <michael.grigorov@konsulko.com>
Signed-off-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11311
Reviewed-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Matt Porter <mporter@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
bitbake does not know to track values that are found and used via
getVarFlags() without them being otherwise refernced and tracked in ways
that are otherwise caught. Further given that we use multiple levels of
varflags here we need to be explicit in their tracking. Add all
variables that we use to varflags where they are added to the metadata.
Bug-AGL: SPEC-939
Change-Id: I32cf16c4354d733e086c6ea9a845934beff94715
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11255
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add uvc.cfg into meta-agl-bsp/recipes-kernel,
Then include this cfg in each board bbappend.
See: https://gerrit.automotivelinux.org/gerrit/#/c/10803/
Change-Id: I5faebefef3560a27496103e1ad4a1ca70377a1ba
Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10893
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-704
This is part of the fixe to make i.MX6 buildable again.
Following fixes are included in this change:
- adding build target imx6qsabreauto
- fixing qt5.8 build error
- refine bblayers.conf layer order (for dynamic-layers)
- meta-fsl-arm -> meta-freescale layer name change
- weston.ini lines (use fbdev-backend.so)
- /dev/galcore permission (by /etc/udev/rules.d/zz-dri.rules)
- kernel configuraion to include smack, etc.
Follwings are stil not addressed yet:
- bblayer.conf layer order still have issue re. dynamic-layers
- built and booted on imx6qsabreauto only yet.
following existing community boards may need update
(i have imx6qsabrelite, but no notrogen6x)
Note, this fix is prepared independently of nxp or fsl-community,
who should follow-up if there are mistakes to be fixed, or updates
that they find needed.
Update:
Refined on review comment regarding tune settings and
kernel configurations. The board successfully boots and shows
AGL homescreen.
But I found I still have problem with USB.
lsusb says 'unable to initialize libusb: -99' error which I am
still faling to find the cause.
Update2:
usb issue may be related to dtb configuration in linux-fslc-imx
better to be tracked separately
Change-Id: If5fa4e5f0450385bcb2648d57e63dc1fc14b0574
Signed-off-by: Takashi Matsuzawa <tmatsuzawa@xevo.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9871
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
Scott Murray
Jan-Simon Moeller
Walter Lozano
Bechir Mghirbi
Mihail Grigorov
José Bollo
Tom Rini
zheng_wenlong
Takashi Matsuzawa