Age | Commit message (Collapse) | Author | Files | Lines |
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
pn533_usb based NFC devices wouldn't work on recent x86 builds, and
requires a patchset from the upstream kernel
Bug-AGL: SPEC-1553
Change-Id: I8113cccd1afc027b80495272bfa8aca42aec7691
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Change-Id: I95916851bcdb730767206c736b2e2b2510c9517b
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
|
|
|
|
|
|
The old info of IBT firmware for Intel bluetooth in the bbappend file
overrides those in the new rocko's linux-firmware.bb and causes
build failure when users try to add a specific fimrware by name.
Change-Id: I71d4f017cfdceda2347a97aeaa0260e643bfcd91
Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
|
|
|
|
These changes are included:
- dra7xx-evm,meta-ti: disable gstreamer-plugins-bad on vayu until fixed
- meta-boundary: has no rocko branch, remove the folder
- meta-intel: generalize the libva bbappend
- general: remove the lua bbappend as it is upstream
- general: re-add fix for kernel-devsrc
(see https://gerrit.automotivelinux.org/gerrit/#/c/11209/)
Documents fixme's in meta-agl-bsp/ROCKO.FIXMEs.
Change-Id: I3df32632558d503c3ce343f907a1ee1e15ae7e26
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Update recipe lttng-modules to v2.10.5 to fix build
issue for machine intel-corei7-64 with Linux kernel
4.9.77. The fix has been already applied in oe-core
master but AGL relies on branch rocko therefore the
fix has to be applied temporary through meta-agl-bsp.
(From OE-Core rev: 7f00a5161889a422d83dc113521d9241fdd89abf)
Bug-AGL: SPEC-1302
Change-Id: I87166026f011ab6735155e65d95a19e56a001d63
Co-Authored-By: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Change-Id: I86a0ff336d16be399fc50ca81cd687cbaa4a68fa
Signed-off-by: Dominig ar Foll Intel Open Source <dominig.arfoll@fridu.net>
|
|
Some lines are already applied in upstream poky.
Bug-AGL: SPEC-1181
Change-Id: I64e0e3180d72c125b16a42df53be1a5196d75bb7
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
|
|
ibt-11-5 is the specific firmware for Joule. The image for IA should be able
to include multiple firmware, including this one.
For having the firmware in the image, please include linux-firmware-ibt by
IMAGE_INSTALL_append = ' linux-firmware-ibt'
Change-Id: I4451dbbf54145df784b763dd3ef924d8a7ac8863
Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12421
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
- All kernel recipes must inherit linux-agl.inc
- All kernel recipes for a given version (e.g. 4.9) should include
linux-VER-agl.inc in order to avoid duplication (such as the SMACK
label patch or security fixes)
- We enforce having merge_config.sh be invoked at the end, in order to
make sure fragments will be applied.
- Add a new fragment for Raspberry Pi to ensure the Pi Touchscreen is
still enabled.
With all of the above, we fix a number of minor issues as well, such as
platforms manually enabling NBD/RAMDISK for netboot as the previous
logic was not working in all cases.
Bug-AGL: SPEC-946
Change-Id: Ic688e899df5861d83712af12d8e1c6c3c9643300
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12063
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: José Bollo <jobol@nonadev.net>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add joystick.cfg into meta-agl-bsp/recipes-kernel,
Then include this cfg in each board bbappend.
Related commit:
https://gerrit.automotivelinux.org/gerrit/#/c/10463/
Change-Id: Ie484cc8017e7198cefa0d8e7476032c325a8348d
Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11575
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Switch to constructing the weston.ini from fragments of files instead of
variables and variable flags. This allows for much easier tracking of
signatures by leveraging existing mechanisms. Update the Readme to
explain how to do the various operations with fragments as well. Note
that for QEMU we do not need to pass -show-cursor as it's already
provided and we do want to change the VGA driver to one that reliably
provides DRM support.
For the HDMI connected screens, rather than name them by vendor name
them first for connection and then required transformation for correct
orientation.
For board-specific options, move them to the board directories.
When we need to change existing cfg options, rather than replace them
the proper location to do this in is the do_configure function.
Bug-AGL: SPEC-964
Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
bitbake does not know to track values that are found and used via
getVarFlags() without them being otherwise refernced and tracked in ways
that are otherwise caught. Further given that we use multiple levels of
varflags here we need to be explicit in their tracking. Add all
variables that we use to varflags where they are added to the metadata.
Bug-AGL: SPEC-939
Change-Id: I32cf16c4354d733e086c6ea9a845934beff94715
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11255
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I4e483052a88faebf21a50515b275326628731930
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11181
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Rework things so that the common kernel configuration fragment
additions are in a new include file, linux-agl.inc, and both the
existing linux-yocto_%.bbappend and the new linux-intel_%.bbappend
in meta-intel pull it in to pick up them up. This avoids hitting
other linux-* recipes, and allows the possibility of using the
include file in kernel recipe bbappends for other BSPs.
Change-Id: I8f4f67c444c47b6a978d95fab660d478d5f764c1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11129
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Dominig ar Foll <dominig.arfoll@fridu.net>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
On EFI systems we need to include a startup.nsh file that EFI will load
and run, in the case of not having the device we're booting from be
defined in the boot order. We have the kernel provide this as it is
independent of boot loader.
Bug-AGL: SPEC-898
Change-Id: Ifdf615e78012e2dbcbd87ee97e4c9d9a19ea01fc
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11101
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: Id81cb1fe7a949850aef1b4178883c853d0e07aa1
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10979
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add uvc.cfg into meta-agl-bsp/recipes-kernel,
Then include this cfg in each board bbappend.
See: https://gerrit.automotivelinux.org/gerrit/#/c/10803/
Change-Id: I5faebefef3560a27496103e1ad4a1ca70377a1ba
Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10893
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
u-boot: v2017.01
dlt-daemon: Remove gzipnative inheritance
- gzipnative.bbclass is removed in pyro branch.
- See ab0f46400c113c0d893be872727a67739d5e794d in poky.
gpm: Remove bbappend file
- upstream(meta-openembedded) is using git(v1.99.7) and this is not
required anymore.
gnutls: Remove bbappend file
- The patch is already applied in upstream.
agl-image-minimal: Remove ROOTFS_PKGMANAGE_BOOTSTRAP
- ROOTFS_PKGMANAGE_BOOTSTRAP is removed in upstream.
- Please see 529244ee212fe14019e35a5f163fab705ddbf141 in poky.
freetype: Change hash value for v2.7.1 binary
shadow: Remove shadow_%.bbappend
- It's already applied upstream poky.
Remove nativesdk-packagegroup-sdk-host.bbappend
- It's already applied in upstream poky.
faac: Remove bbappend file
- It's already applied meta-openembedded upstream.
pulseaudio: Change bbappend naming
- Upstream yocto provides pulseaudio v10.0.
weston: re-create patch to apply new version (v2.0.0)
- Remove 0001-compositor-drm.c-Launch-without-input-devices.patch
because it's already applied in new version.
mesa: Remove 12.0.3 recipe and fix build error for qemux86-64
- Yocto upstream supports 17.0.2 and v12.0.3 is not required anymore in
raspberrypi
- Error:
| configure: error: --enable-gallium-llvm selected but llvm-config is
not found
wayland-ivi-extension: Upgrade to latest master version
- Due to weston upgrade, wayland-ivi-extension should be upgraded.
packagegroup-ivi-common-core-multimedia: Remove alsa-lib
- alsa-lib has empty package and it's not required anymore.
Add agl-driver and agl-passenger in group and passwd
- Parsing Error:
agl-users: groupname agl-passenger does not have a static ID defined.
poky-agl.conf: Change gstreamer default version to v1.10.x
- Yocto upstream moves gstreamer to v1.10.4.
af-main: Fix build error
- Error:
file /usr/local conflicts between attempted installs of
af-main-1.0-r0.corei7_64 and base-files-3.0.14-r89.qemux86_64
intel-corei7-64: Change gstreamer-vaapi-1.0 name
- gstreamer-vaapi-1.0 is moved to oe-core and its name is changed to
gstreamer1.0-vaapi.
linux-raspberrypi: Drop 4.4 bbappend
- The upstream meta-raspberrypi doesn't support v4.4 anymore.
- CVE patches are not required anymore.
glibc: Remove bbappend
- The bug-20116 is already applied in 2.25
cynara,security-manager: Fix build error
- cynara: Replace bb.data to d
- security-manager: Temporarily use 'no' in APPLY variable
u-boot-ota: Add SRC_URI
- In pyro, SRC_URI and S is moved from .inc to .bb
linux-yocto: Remove 4.8 and 4.4 bbappend
- Yocto 2.3 (Pyro) doesn't support v4.8 kernel anymore.
- CVE patches in meta-agl-bsp are already applied in Yocto 2.3.
tcf-agent: Remove bbappend file
- This change is merged to upstream poky (pyro)
bluez5: Remove recipe and add .bbappend
- Yocto 2.3 (Pyro) already has same version.
- bluetooth.conf file is added in .bbappend
python-pycrypto: Remove recipe
- meta-openembedded (Pyro) already has same version.
meta-agl-bsp/classes/image.bbclass: Arrange for pyro
- image.bbclass is taken from poky/meta/classes/image.bbclass and only
changed IMAGE_TYPE_vm variable.
libsoup: Fix native build error temporarily
v2 (jsmoeller):
meta-agl-bsp/meta-ti:
- workaround patches in meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
- fix old python code in meta-ti/recipes-arago/ipumm-fw/ipumm-fw_3.00.13.00.bb
- workaround patches in meta-ti/recipes-arago/weston/weston_%.bbappend
- make specific to dra7xx-evm:
-- meta-ti/recipes-bsp/alsa-state/alsa-state.bbappend
-- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend
-- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio/dra7xx-evm-set-default-sink-source.patch
-- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
TODO/FIXME's in:
- meta-agl-bsp/meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
- meta-agl-bsp/meta-ti/recipes-arago/weston/weston_%.bbappend
- meta-agl-bsp/meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend
Bug-AGL: SPEC-646
Change-Id: I4162ae887d3334e9102575e3724483aa25f4bd9c
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10457
|
|
The config fragments were not getting included for kernel 4.8
(intel-corei7-64, Minnowboard)
Bug-AGL: SPEC-732
Change-Id: I0ae3e3d40a4e8439274920445108460e16fc42ef
Signed-off-by: Dennis Field <dennisf@radiosound.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10071
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Dominig ar Foll <dominig.arfoll@fridu.net>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
v2 (jsmoeller): Add append files for boards that need special handling.
Change-Id: I172b71be6e825aa6399f22899e9b6eaacc86e72b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9791
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
|
|
* remove weston-intel.ini
* add new package weston-ini-conf
* the list of the sections of weston.ini is described in variable flags WESTONSECTION
* each section is described in variable flags WESTONSECTION
* each output screen is described in agl_screen variable
Bug-AGL: SPEC-477
Change-Id: I3d25ab49018e3842c916993ba8b9bcc2428d5170
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Since CES2017, AGL doesn't use 'layer-add-surfaces' command.
wl-shell-emultor.so is only required by 'layer-add-surfaces'.
So we can remove wl-shell-emultor from AGL.
Bug-AGL: SPEC-341
Change-Id: I0cad29ff1534e8d3fd4b94f8a13490b9fa19918e
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
* replace base_contains by bb.utils.contains
* base_contains is deprecated use bb.utils.contains instead
* yocto version: 2.2
Change-Id: Iaed1e8d0dd36d7ad348ac144fdcdf28ccd359e40
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
|
|
This changeset removes unused or old/stale files from the
meta-agl-bsp layer before the 'Daring Dab' development cycle starts.
Change-Id: I9df5841bb65545a435637d1067df573506f4cb02
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
due to the move to Yocto 2.2
Change-Id: I9302ecde21f3cd33c903a5391f47d574d57308ec
Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
|
|
Change-Id: I565bdf1ac23b19bbdc65401cd0843f8a8de1b2b7
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
|
|
Removed linux-firmware-ibt since it is only necessary for the
Joule platform.
Change-Id: Ia4916fbc777299df4a094874ad1585a43a46d39b
Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
|
|
This adds neccessary firmware to support the Joule board, including wifi and
bluetooth.
Change-Id: Ia6973415113119aaf60fff0dbb494027fba96fd5
Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
|
|
Change-Id: I11b245aea28b76f17cba3cdc8c964129bbaf906b
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
|
|
Change-Id: Id899777abafd84bc2c7eb9d3ba0a22906a45c7cb
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
|
|
Change-Id: Ie854777d28f455082bafdee07f36ab21c025dc68
Signed-off-by: Dominig ar Foll <dominig.arfoll@fridu.net>
|
|
runtime dependency with x11
Change-Id: I175b0d9900d61546cb0f116a1d698ee1f60b84b7
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
Correct libva incorrect runtime dependency with x11
Change-Id: Ic4231c217c8c63575a98d370c898b8cb04e3a980
Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
|