summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-raspberrypi/recipes-bsp
AgeCommit message (Collapse)AuthorFilesLines
2021-09-22raspberrypi: Upgrade to u-boot v2021.07 for latest 4B boardsHiroyuki Ishii3-0/+7
The latest revision (1.4) of raspberry pi 4B board can't be boot by using current version of u-boot with showing "No partition table" message. This can be related to the change of DMA hardware on the new SoC (2711ZPKFSB06C0T) and we've confirmed upgrading u-boot to newer version than 2021.04 which has several fixes around Broadcom's DMA solves the issue. Also, we'd like to choice 2021.07 rather than 2021.04 since it's going to be supported for longer in yocto project. Bug-AGL: SPEC-4072 Signed-off-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com> Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I0f396611cb76230dd91c6d42b9f2a7cfb92909df Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26664 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Scott Murray <scott.murray@konsulko.com>
2021-03-09meta-agl-bsp: clean up Raspberry Pi Xen supportScott Murray1-3/+0
Changes: - Rename bbappend for Xen support to work with 5.4 kernel. - Drop one of the Xen support patches that no longer applies, as it seems no longer required due to upstream changes. - Move Xen kernel configuration fragment use to non-versioned kernel bbappend to simplify future upgrades. - Move ENABLE_UART definition to machine template inc files instead of duplicating it in multiple bbappends. This is more in line with how upstream indicates it be used. Note that these changes have been compile tested with the agl-virt-xen feature, but the resulting image has not yet been tested with Xen. This is still an improvement, as agl-virt-xen would have silently not affected kernel configuration previously. As well, some of the reshuffling done here will simplify the kernel upgrade in the next branch. Bug-AGL: SPEC-3841 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I022cccef00fcd0a82ceef89d4aab1894004543a3 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26144 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-26raspberrypi: Upgrade to u-boot v2020.10Paul Barker3-0/+7
The newer u-boot version supports the network interface on the rpi4, allowing us to do things like DHCP boot. Also switch to the preferred "rpi_arm64" u-boot config. Bug-AGL: SPEC-2983 Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: I0dff4779f98c7ce6394efd9feb58b7f2a8933296 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25937 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-08-13meta-agl-bsp: meta-raspberrypi updates for YP 3.1.2Scott Murray4-105/+16
Changes include: - Rename bcm2835-bootfiles.bbappend to bootfiles.bbappend to match the recipe rename done in meta-raspberrypi - Update bootfile paths in rpi-config_git.bbappend to match the rename done in meta-raspberrypi - Remove local u-boot bbappend, as none of its changes are required with latest meta-raspberrypi and meta-updater - A previously silently failing command in the create-combined-dtb recipe's do_install when building with agl-sota enabled now triggers a build failure, logic has been added to handle meta-updater's disabling of the required overlay file. Bug-AGL: SPEC-3529 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ib5fd9f308fcd2da76ae882dd5b2413e56d3eee40 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25081 Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-05-26Raspberry 4: XEN supportLeonid Lazarev3-0/+68
Added the support for DOM0 in raspberry pi4. The feature agl-virt-xen should be enabled to activate this code. 1512 MB of memory is used for DOM0 machine. There are limitations: - brcmfmac module disabled (bluethooth and Wifi) due to the crash - total_memory is set to the 3Gb, as it impacts the USB ports on rasbperry pi4 on Linux kernel 4.19 v2 (jsmoeller): make changes in virtualization-layer conditional to raspberrypi4 Bug-AGL: SPEC-3259 Change-Id: I873fbf1f5498e31ae5f468407502f16e1873f7fc Signed-off-by: Leonid Lazarev <leonid.lazarev@mera.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24522 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-04-27meta-agl-bsp: update raspberrypi configuration for dunfellScott Murray2-11/+0
Changes: - Remove Mesa version over-ride, since dunfell has newer version. - Remove bcm2835-bootfiles SRCREV updates since dunfell has newer versions of the files. - Remove kernel SRCREV update in linux-raspberrypi_4.19.bbappend since dunfell has newer version, and add include of new linux-4.19-agl.inc to keep getting CAN qdisc patch. Bug-AGL: SPEC-3302 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I7f7a9b454de9eb4fae7075b30ee89b3aec4e6a43
2020-01-27meta-agl-bsp: meta-raspberrypi: handle zeus upgradeScott Murray15-965/+0
Remove backported u-boot, mesa, userland, and linux-raspberrypi recipes, tweaking local bbappends as required. Note that the linux-raspberrypi bump to 4.19.80 for rpi4 dual screen support is now handled via bbappend. Bug-AGL: SPEC-2932 Change-Id: I019633e86a921b9444bc718ac0557b04f25b27f4 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-11-05bcm2835-bootfiles.bbappend: Update firmwareLeon Anavi1-8/+8
Update the firmware to support Linux kernel 4.19.80 for Raspberry Pi 3 B/B+ and 4. This way both the HDMI and the official 7" Raspberry Pi touch screen display are supported. Bug-AGL: SPEC-2465 Change-Id: Idb028b8abca5a44da2783def8af2c28f04de66d2 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-04rpi-config: Set max_framebuffers to 2 to support dual displayChanghyeok Bae1-0/+5
Change-Id: Id9ca08ede2aedbc122a04d97ca4bb5bd8478b717 Signed-off-by: Changhyeok Bae <changhyeok.bae@daimler.com>
2019-09-13u-boot-2019.07: Fix for Raspberry Pi 4Leon Anavi10-5/+514
Following recent changes in the BSP the recipe for u-boot 2019.07 was failing to build for Raspberry Pi 4. This fix brings existing patches from master branch of meta-raspberrypi to AGL which is still based on Yocto project release Thud. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ic544d02032198dc05da24bc3246e8911d300c1ea Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-08-12uEnv.txt: Modify uEnv.txt for SOTALeon Anavi2-14/+42
Modify uEnv.txt and uEnv.cma.txt according to the recent changes in layers meta-updater and meta-updater-raspberrypi to ensure that AGL image with agl-sota feature will boot properly on Raspberry Pi 3 B/B+. Bug-AGL: SPEC-2729 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ib8fe74bcd6e12208aaddc81f608fe84eee9de601
2019-08-12u-boot_2019.07.bbappend: Apply patch for AGL SOTALeon Anavi2-0/+88
Recently we have updated u-boot to version 2019.07 to support Raspberry Pi 4 in AGL based on Yocto release Thud. Therefore a new version of the patch from meta-updater-raspberrypi branch warrior has to be applied to successfully build U-Boot when feature agl-sota is enabled. Bug-AGL: SPEC-2729 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ie72cc9b81ff6e041cfe6edb26f383b7e0d43d8f9
2019-07-24bcm2835-bootfiles.bbappend: Support Raspberry Pi 4Leon Anavi1-0/+11
Use different bootfiles if the machine has been set to the new Raspberry Pi 4 and keep the old files for Raspberry Pi 3. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I3cbacc45c0f82ce2c70641c008ad2975a9e58fbd
2019-07-24rpi-config_git.bbappend: Update for Raspberry Pi 4Leon Anavi1-0/+20
Extend the deploy task to support Rasppberry Pi 4. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I3a166a873b431539e154ef6a2b1e69df02a0f2a3
2019-07-24u-boot_2019.07: Bootloader for Raspberry Pi 4Leon Anavi6-0/+457
Add U-Boot version that supports Raspberry Pi 4. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ib550e38c7ecaf0ab2149b04666cffdcbaaf08134
2019-07-13Revert "Fix rpi touchscreen support on master"Jan-Simon Moeller2-13/+2
We need to reconsider this changeset. It seems to produce a regression. This reverts commit ccb667c35ffdea7a2bc1304750e6b22368cd55f7. Change-Id: I42754a899e8530f4e18a069ed227f18a8d615801
2019-06-05Fix rpi touchscreen support on masterJan-Simon Möller2-2/+13
We seem to miss a few bits that changed between kernel 4.9 and kernel 4.14 regarding the 7'' touchscreen. One addition is the rpi-backlight.dtbo which we also need to use in our create-combined-dtb recipe for CI use. We also seem to require https://github.com/raspberrypi/linux/pull/2693#issue-217750943 . Thanks to Scott Murray for the help digging through this. v2 and v3: add devicetree changes v4 and v5: fix name of dtbo v6: move append to machine include - we need it as a global var v7: add to config.txt for sdcard boot case Bug-AGL: SPEC-2465 Change-Id: I2bb3cd974b74a790292e1f36ffdca034928e0bca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-04-24Switch to meta-updaterAnton Gerasimov4-0/+49
Replace SOTA-related sections with includes, moved u-boot-ota common to minnowboard and qemu to meta-agl-bsp Change-Id: I0629a63154ff90bd712f621297b886505a2f462c Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9189 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2016-12-29rpi-config: add configurable CMA low and high water marksMatt Ranostay1-0/+8
For dynamically allocating of CMA blocks the low and high water marks settings determine when the GPU requests or releases memory from the CPU. Change-Id: Iad494c101fec0884bb687c5ea51c9657b7c17bd9 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2016-11-02Bugfix: conditional append instead of appending to overrideAnton Gerasimov1-1/+1
Change-Id: I337876d9d5311618efd3e5a627724801de0acd6c Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-10-31Move RPi specific bbappends to meta-agl-bspAnton Gerasimov2-0/+5
Bug-AGL: SPEC-254 Change-Id: I1904b7e9ec09d5e9f5acc7a3d4671da9e2dccbb3 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-09-25meta-raspberrypi: AGL support for Raspberry PiLeon Anavi1-0/+11
Yocto/OE layer that extends the recipes for mesa and the supported Linux kernel for Raspberry Pi for successful build of AGL with Wayland, Weston and Qt. It is based on the existing ports of Tizen and GENIVI Development Platform for Raspberry Pi. Change-Id: Icfed9e888c2abaf26c14ab402d0a90215862afbd Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>