aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-raspberrypi/recipes-graphics/wayland
AgeCommit message (Collapse)AuthorFilesLines
2017-10-20weston-ini-conf: Rework to use fragments to construct weston.iniTom Rini2-5/+7
Switch to constructing the weston.ini from fragments of files instead of variables and variable flags. This allows for much easier tracking of signatures by leveraging existing mechanisms. Update the Readme to explain how to do the various operations with fragments as well. Note that for QEMU we do not need to pass -show-cursor as it's already provided and we do want to change the VGA driver to one that reliably provides DRM support. For the HDMI connected screens, rather than name them by vendor name them first for connection and then required transformation for correct orientation. For board-specific options, move them to the board directories. When we need to change existing cfg options, rather than replace them the proper location to do this in is the do_configure function. Bug-AGL: SPEC-964 Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-12weston-ini-conf: Make this track variables correctly for signaturesTom Rini1-0/+2
bitbake does not know to track values that are found and used via getVarFlags() without them being otherwise refernced and tracked in ways that are otherwise caught. Further given that we use multiple levels of varflags here we need to be explicit in their tracking. Add all variables that we use to varflags where they are added to the metadata. Bug-AGL: SPEC-939 Change-Id: I32cf16c4354d733e086c6ea9a845934beff94715 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11255 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-04-19Use weston-init to startup westonRonan Le Martret2-21/+0
* weston.service should not be a part of weston recipes * remove weston.service from AGL weston recipes * yocto upstream uses the recipe weston-init to startup weston * customize weston-start with sed - remove openvt - add option to weston-launch * customize weston.service with sed - add option for weston * unified the weston startup beteween AGL BSPs * remove fix on the AGL BSP Bug-AGL: SPEC-452 Bug-AGL: SPEC-310 Change-Id: I12722826abdc004214d289961e900c36528ec6e3 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2017-03-30Generate weston.ini dynamicallyRonan Le Martret3-25/+4
* remove weston-intel.ini * add new package weston-ini-conf * the list of the sections of weston.ini is described in variable flags WESTONSECTION * each section is described in variable flags WESTONSECTION * each output screen is described in agl_screen variable Bug-AGL: SPEC-477 Change-Id: I3d25ab49018e3842c916993ba8b9bcc2428d5170 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2017-03-23Removed wl-shell-emulator from AGLRonan Le Martret1-1/+1
Since CES2017, AGL doesn't use 'layer-add-surfaces' command. wl-shell-emultor.so is only required by 'layer-add-surfaces'. So we can remove wl-shell-emultor from AGL. Bug-AGL: SPEC-341 Change-Id: I0cad29ff1534e8d3fd4b94f8a13490b9fa19918e Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2017-01-02Add entry for official pi touchscreen over DSI portJan-Simon Möller1-0/+6
This change add support for the official touchscreen that is connected throught the DSI-1 port to the board. Change-Id: If85490ca69310922b8bf314681d1d8459995c61e Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-12-15weston-raspberrypi.ini: Add commented out mode for GeChic 1502iScott Murray1-0/+2
Add the commented out mode line for using the GeChic 1502i in 1080p so that it's easy to enable it for the CES demo setup. Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Idcdf25188d3391403ee29c5bda7568c652b4c730
2016-11-28weston-raspberrypi.ini: Fix Weston configurationsLeon Anavi1-1/+6
Fix Weston configurations for Raspberry Pi 2/3 and run it in IVI shell. Following these changes start_ALS2016_ivi-shell.sh works again. Bug-AGL: SPEC-268 Change-Id: Ief75dfc078a42aba65161783b2a7beef23115e33 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-11-25Use IVI-shell instead of desktop-shell as default in weston.iniBocklage, Jens1-5/+3
Using IVI-shell as default for following platforms: - QEMU - Renesas - Raspberry Pi The IVI-shell is needed to run the CES 2017 demo. Signed-off-by: Bocklage, Jens <Jens_Bocklage@mentor.com>
2016-11-17weston.sh: Set XDG_RUNTIME_DIR to /run/user/0Leon Anavi1-1/+1
Set XDG_RUNTIME_DIR for Raspberry Pi in weston.sh to /run/user/0. Bug-AGL: SPEC-310 Change-Id: I283ee98ae17a54aa3e6a4c8574ab9debe1b21fbb Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-09-26weston: Set XDG_RUNTIME_DIR for Raspberry PiLeon Anavi2-0/+12
Set environment variable XDG_RUNTIME_DIR and fix Weston on Raspberry Pi 2/3 through script /etc/profile.d/weston.sh. Change-Id: Ie561623641f287e1ec911a5813c2cff225af4977 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-09-25weston: Use drm-backend.so for Raspberry PiLeon Anavi2-0/+23
Replace weston.ini configration for Raspberry Pi and use drm-backend.so as a backend for Weston. Change-Id: I8acedd63fc0a124e4f369609270094c76b7e7f88 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>