| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Bring Mesa 19.1.6 to meta-agl-bsp/meta-raspberrypi because there
are driver issues with Mesa 18.1 for Raspberry Pi 4. The recipes
for this new version are coming from the master branch of layer
openembedded-core. With the newer version of Mesa Weston works
fine on Raspberry Pi 4 and the home screen appears as expected.
Bug-AGL: SPEC-2656
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: I0d4f6e6fdff3c6ac54a72d19abfc292efcea7a3f
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Reduce the screen resolution for Raspberry Pi from Full HD to
HD Ready (1280x720) to reduce the memory consumption and
improve the behaviour of the whole system. This change is
applied only for HDMI display on Raspberry Pi due to the
limited hardware resources.
Bug-AGL: SPEC-1745
Change-Id: Id2fb571b0822f8166086f5ad6a7fcf8ea25c933a
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Switch to constructing the weston.ini from fragments of files instead of
variables and variable flags. This allows for much easier tracking of
signatures by leveraging existing mechanisms. Update the Readme to
explain how to do the various operations with fragments as well. Note
that for QEMU we do not need to pass -show-cursor as it's already
provided and we do want to change the VGA driver to one that reliably
provides DRM support.
For the HDMI connected screens, rather than name them by vendor name
them first for connection and then required transformation for correct
orientation.
For board-specific options, move them to the board directories.
When we need to change existing cfg options, rather than replace them
the proper location to do this in is the do_configure function.
Bug-AGL: SPEC-964
Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
bitbake does not know to track values that are found and used via
getVarFlags() without them being otherwise refernced and tracked in ways
that are otherwise caught. Further given that we use multiple levels of
varflags here we need to be explicit in their tracking. Add all
variables that we use to varflags where they are added to the metadata.
Bug-AGL: SPEC-939
Change-Id: I32cf16c4354d733e086c6ea9a845934beff94715
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11255
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
u-boot: v2017.01
dlt-daemon: Remove gzipnative inheritance
- gzipnative.bbclass is removed in pyro branch.
- See ab0f46400c113c0d893be872727a67739d5e794d in poky.
gpm: Remove bbappend file
- upstream(meta-openembedded) is using git(v1.99.7) and this is not
required anymore.
gnutls: Remove bbappend file
- The patch is already applied in upstream.
agl-image-minimal: Remove ROOTFS_PKGMANAGE_BOOTSTRAP
- ROOTFS_PKGMANAGE_BOOTSTRAP is removed in upstream.
- Please see 529244ee212fe14019e35a5f163fab705ddbf141 in poky.
freetype: Change hash value for v2.7.1 binary
shadow: Remove shadow_%.bbappend
- It's already applied upstream poky.
Remove nativesdk-packagegroup-sdk-host.bbappend
- It's already applied in upstream poky.
faac: Remove bbappend file
- It's already applied meta-openembedded upstream.
pulseaudio: Change bbappend naming
- Upstream yocto provides pulseaudio v10.0.
weston: re-create patch to apply new version (v2.0.0)
- Remove 0001-compositor-drm.c-Launch-without-input-devices.patch
because it's already applied in new version.
mesa: Remove 12.0.3 recipe and fix build error for qemux86-64
- Yocto upstream supports 17.0.2 and v12.0.3 is not required anymore in
raspberrypi
- Error:
| configure: error: --enable-gallium-llvm selected but llvm-config is
not found
wayland-ivi-extension: Upgrade to latest master version
- Due to weston upgrade, wayland-ivi-extension should be upgraded.
packagegroup-ivi-common-core-multimedia: Remove alsa-lib
- alsa-lib has empty package and it's not required anymore.
Add agl-driver and agl-passenger in group and passwd
- Parsing Error:
agl-users: groupname agl-passenger does not have a static ID defined.
poky-agl.conf: Change gstreamer default version to v1.10.x
- Yocto upstream moves gstreamer to v1.10.4.
af-main: Fix build error
- Error:
file /usr/local conflicts between attempted installs of
af-main-1.0-r0.corei7_64 and base-files-3.0.14-r89.qemux86_64
intel-corei7-64: Change gstreamer-vaapi-1.0 name
- gstreamer-vaapi-1.0 is moved to oe-core and its name is changed to
gstreamer1.0-vaapi.
linux-raspberrypi: Drop 4.4 bbappend
- The upstream meta-raspberrypi doesn't support v4.4 anymore.
- CVE patches are not required anymore.
glibc: Remove bbappend
- The bug-20116 is already applied in 2.25
cynara,security-manager: Fix build error
- cynara: Replace bb.data to d
- security-manager: Temporarily use 'no' in APPLY variable
u-boot-ota: Add SRC_URI
- In pyro, SRC_URI and S is moved from .inc to .bb
linux-yocto: Remove 4.8 and 4.4 bbappend
- Yocto 2.3 (Pyro) doesn't support v4.8 kernel anymore.
- CVE patches in meta-agl-bsp are already applied in Yocto 2.3.
tcf-agent: Remove bbappend file
- This change is merged to upstream poky (pyro)
bluez5: Remove recipe and add .bbappend
- Yocto 2.3 (Pyro) already has same version.
- bluetooth.conf file is added in .bbappend
python-pycrypto: Remove recipe
- meta-openembedded (Pyro) already has same version.
meta-agl-bsp/classes/image.bbclass: Arrange for pyro
- image.bbclass is taken from poky/meta/classes/image.bbclass and only
changed IMAGE_TYPE_vm variable.
libsoup: Fix native build error temporarily
v2 (jsmoeller):
meta-agl-bsp/meta-ti:
- workaround patches in meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
- fix old python code in meta-ti/recipes-arago/ipumm-fw/ipumm-fw_3.00.13.00.bb
- workaround patches in meta-ti/recipes-arago/weston/weston_%.bbappend
- make specific to dra7xx-evm:
-- meta-ti/recipes-bsp/alsa-state/alsa-state.bbappend
-- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend
-- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio/dra7xx-evm-set-default-sink-source.patch
-- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
TODO/FIXME's in:
- meta-agl-bsp/meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
- meta-agl-bsp/meta-ti/recipes-arago/weston/weston_%.bbappend
- meta-agl-bsp/meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend
Bug-AGL: SPEC-646
Change-Id: I4162ae887d3334e9102575e3724483aa25f4bd9c
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10457
|
|
Yocto morty has mesa 12.0.1 but it has a bug for vc4 driver.
The bug is fixed in v12.0.2 and yocto upstream provides v12.0.3.
This commit is taking from
https://github.com/GENIVI/meta-genivi-dev/commit/e9c013951feb5c78519da04513ab79baf400264e.
Bug-AGL: SPEC-445
Change-Id: Idfd0878f3549c20eac77ae680a65347ec851bd94
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9253
Reviewed-by: Changhyeok Bae <changhyeok.bae@lge.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* weston.service should not be a part of weston recipes
* remove weston.service from AGL weston recipes
* yocto upstream uses the recipe weston-init to startup weston
* customize weston-start with sed
- remove openvt
- add option to weston-launch
* customize weston.service with sed
- add option for weston
* unified the weston startup beteween AGL BSPs
* remove fix on the AGL BSP
Bug-AGL: SPEC-452
Bug-AGL: SPEC-310
Change-Id: I12722826abdc004214d289961e900c36528ec6e3
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
* remove weston-intel.ini
* add new package weston-ini-conf
* the list of the sections of weston.ini is described in variable flags WESTONSECTION
* each section is described in variable flags WESTONSECTION
* each output screen is described in agl_screen variable
Bug-AGL: SPEC-477
Change-Id: I3d25ab49018e3842c916993ba8b9bcc2428d5170
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Since CES2017, AGL doesn't use 'layer-add-surfaces' command.
wl-shell-emultor.so is only required by 'layer-add-surfaces'.
So we can remove wl-shell-emultor from AGL.
Bug-AGL: SPEC-341
Change-Id: I0cad29ff1534e8d3fd4b94f8a13490b9fa19918e
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
This change add support for the official touchscreen that is connected throught the DSI-1
port to the board.
Change-Id: If85490ca69310922b8bf314681d1d8459995c61e
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Add the commented out mode line for using the GeChic 1502i in 1080p so
that it's easy to enable it for the CES demo setup.
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Idcdf25188d3391403ee29c5bda7568c652b4c730
|
|
Fix Weston configurations for Raspberry Pi 2/3
and run it in IVI shell. Following these changes
start_ALS2016_ivi-shell.sh works again.
Bug-AGL: SPEC-268
Change-Id: Ief75dfc078a42aba65161783b2a7beef23115e33
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Using IVI-shell as default for following platforms:
- QEMU
- Renesas
- Raspberry Pi
The IVI-shell is needed to run the CES 2017 demo.
Signed-off-by: Bocklage, Jens <Jens_Bocklage@mentor.com>
|
|
Set XDG_RUNTIME_DIR for Raspberry Pi in weston.sh
to /run/user/0.
Bug-AGL: SPEC-310
Change-Id: I283ee98ae17a54aa3e6a4c8574ab9debe1b21fbb
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Remove proprietary components such as libomxil
which require setting
LICENSE_FLAGS_WHITELIST = "commercial".
Bug-AGL: SPEC-254
Change-Id: I93afadcaf70de8c0af23466efa7a4e3ef45d20b6
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Set environment variable XDG_RUNTIME_DIR and fix
Weston on Raspberry Pi 2/3 through script
/etc/profile.d/weston.sh.
Change-Id: Ie561623641f287e1ec911a5813c2cff225af4977
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Replace weston.ini configration for Raspberry Pi
and use drm-backend.so as a backend for Weston.
Change-Id: I8acedd63fc0a124e4f369609270094c76b7e7f88
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Yocto/OE layer that extends the recipes for mesa
and the supported Linux kernel for Raspberry Pi
for successful build of AGL with Wayland, Weston
and Qt. It is based on the existing ports of
Tizen and GENIVI Development Platform for
Raspberry Pi.
Change-Id: Icfed9e888c2abaf26c14ab402d0a90215862afbd
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
Leon Anavi
Scott Murray
Tom Rini
Changhyeok Bae
Ronan Le Martret
Jan-Simon Möller
Bocklage, Jens