| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Added the support for DOM0 in raspberry pi4. The feature agl-virt-xen should be enabled to activate this code.
1512 MB of memory is used for DOM0 machine.
There are limitations:
- brcmfmac module disabled (bluethooth and Wifi) due to the crash
- total_memory is set to the 3Gb, as it impacts the USB ports on rasbperry pi4 on Linux kernel 4.19
v2 (jsmoeller): make changes in virtualization-layer conditional to raspberrypi4
Bug-AGL: SPEC-3259
Change-Id: I873fbf1f5498e31ae5f468407502f16e1873f7fc
Signed-off-by: Leonid Lazarev <leonid.lazarev@mera.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24522
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
Changes:
- Remove Mesa version over-ride, since dunfell has newer version.
- Remove bcm2835-bootfiles SRCREV updates since dunfell has newer
versions of the files.
- Remove kernel SRCREV update in linux-raspberrypi_4.19.bbappend
since dunfell has newer version, and add include of new
linux-4.19-agl.inc to keep getting CAN qdisc patch.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I7f7a9b454de9eb4fae7075b30ee89b3aec4e6a43
|
|
Remove backported u-boot, mesa, userland, and linux-raspberrypi recipes,
tweaking local bbappends as required. Note that the linux-raspberrypi
bump to 4.19.80 for rpi4 dual screen support is now handled via bbappend.
Bug-AGL: SPEC-2932
Change-Id: I019633e86a921b9444bc718ac0557b04f25b27f4
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Although the rpi-config_git.bbappend enable ENABLE_UART_raspberrypi4 =
"1", it seems make no effect.
This patch is temporary solution, which can do some help to debug pi 4
boot issue.
Bug-AGL: SPEC-2995
Change-Id: I0b634c4d8df576884b939ea259d4f8b7ca5330d7
Signed-off-by: Li Xiaoming <lixm.fnst@cn.fujitsu.com>
|
|
Update Linux kernel for Raspberry Pi to 4.19.80. This version
allows to run firmware KMS to support output through HDMI and
DSI for the official 7" Raspberry Pi touch screen display.
Bug-AGL: SPEC-2465
Change-Id: Ie854f8609196f986a1f9067da1010fb2e510e7c4
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Add recipe for Linux kernel 4.19 for Raspberry Pi 4 and keep
4.14 for Raspberry Pi 3. The recipe for 4.19 is backported
from master branch of the upstream of meta-raspberrypi.
Bug-AGL: SPEC-2656
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: I93bbc5527383e26862894859bff6e44a6bc17966
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
We need to reconsider this changeset. It seems to
produce a regression.
This reverts commit ccb667c35ffdea7a2bc1304750e6b22368cd55f7.
Change-Id: I42754a899e8530f4e18a069ed227f18a8d615801
|
|
We seem to miss a few bits that changed between kernel 4.9 and kernel 4.14
regarding the 7'' touchscreen.
One addition is the rpi-backlight.dtbo which we also need to use in our create-combined-dtb
recipe for CI use.
We also seem to require https://github.com/raspberrypi/linux/pull/2693#issue-217750943 .
Thanks to Scott Murray for the help digging through this.
v2 and v3: add devicetree changes
v4 and v5: fix name of dtbo
v6: move append to machine include - we need it as a global var
v7: add to config.txt for sdcard boot case
Bug-AGL: SPEC-2465
Change-Id: I2bb3cd974b74a790292e1f36ffdca034928e0bca
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This is for the 3b+ board.
Change-Id: I428a12b836c1f7c3f01b29602e666ae28efd647f
Bug-AGL: SPEC-2456
Signed-off-by: build.automotivelinux.org <jenkins@automotivelinux.org>
|
|
This is needed for network booting.
Change-Id: Iecee73a3b0bf31c3c68bb4beea1f41d07c9b5ec5
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Enable HCI UART for fixing current lacking of hci-uart.ko
which made brcm43438.service fails to start.
Change-Id: I0905820daa4bc1b36f2677f2f685f17a71fe11e6
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
|
|
- All kernel recipes must inherit linux-agl.inc
- All kernel recipes for a given version (e.g. 4.9) should include
linux-VER-agl.inc in order to avoid duplication (such as the SMACK
label patch or security fixes)
- We enforce having merge_config.sh be invoked at the end, in order to
make sure fragments will be applied.
- Add a new fragment for Raspberry Pi to ensure the Pi Touchscreen is
still enabled.
With all of the above, we fix a number of minor issues as well, such as
platforms manually enabling NBD/RAMDISK for netboot as the previous
logic was not working in all cases.
Bug-AGL: SPEC-946
Change-Id: Ic688e899df5861d83712af12d8e1c6c3c9643300
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12063
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: José Bollo <jobol@nonadev.net>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add joystick.cfg into meta-agl-bsp/recipes-kernel,
Then include this cfg in each board bbappend.
Related commit:
https://gerrit.automotivelinux.org/gerrit/#/c/10463/
Change-Id: Ie484cc8017e7198cefa0d8e7476032c325a8348d
Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11575
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add uvc.cfg into meta-agl-bsp/recipes-kernel,
Then include this cfg in each board bbappend.
See: https://gerrit.automotivelinux.org/gerrit/#/c/10803/
Change-Id: I5faebefef3560a27496103e1ad4a1ca70377a1ba
Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10893
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
u-boot: v2017.01
dlt-daemon: Remove gzipnative inheritance
- gzipnative.bbclass is removed in pyro branch.
- See ab0f46400c113c0d893be872727a67739d5e794d in poky.
gpm: Remove bbappend file
- upstream(meta-openembedded) is using git(v1.99.7) and this is not
required anymore.
gnutls: Remove bbappend file
- The patch is already applied in upstream.
agl-image-minimal: Remove ROOTFS_PKGMANAGE_BOOTSTRAP
- ROOTFS_PKGMANAGE_BOOTSTRAP is removed in upstream.
- Please see 529244ee212fe14019e35a5f163fab705ddbf141 in poky.
freetype: Change hash value for v2.7.1 binary
shadow: Remove shadow_%.bbappend
- It's already applied upstream poky.
Remove nativesdk-packagegroup-sdk-host.bbappend
- It's already applied in upstream poky.
faac: Remove bbappend file
- It's already applied meta-openembedded upstream.
pulseaudio: Change bbappend naming
- Upstream yocto provides pulseaudio v10.0.
weston: re-create patch to apply new version (v2.0.0)
- Remove 0001-compositor-drm.c-Launch-without-input-devices.patch
because it's already applied in new version.
mesa: Remove 12.0.3 recipe and fix build error for qemux86-64
- Yocto upstream supports 17.0.2 and v12.0.3 is not required anymore in
raspberrypi
- Error:
| configure: error: --enable-gallium-llvm selected but llvm-config is
not found
wayland-ivi-extension: Upgrade to latest master version
- Due to weston upgrade, wayland-ivi-extension should be upgraded.
packagegroup-ivi-common-core-multimedia: Remove alsa-lib
- alsa-lib has empty package and it's not required anymore.
Add agl-driver and agl-passenger in group and passwd
- Parsing Error:
agl-users: groupname agl-passenger does not have a static ID defined.
poky-agl.conf: Change gstreamer default version to v1.10.x
- Yocto upstream moves gstreamer to v1.10.4.
af-main: Fix build error
- Error:
file /usr/local conflicts between attempted installs of
af-main-1.0-r0.corei7_64 and base-files-3.0.14-r89.qemux86_64
intel-corei7-64: Change gstreamer-vaapi-1.0 name
- gstreamer-vaapi-1.0 is moved to oe-core and its name is changed to
gstreamer1.0-vaapi.
linux-raspberrypi: Drop 4.4 bbappend
- The upstream meta-raspberrypi doesn't support v4.4 anymore.
- CVE patches are not required anymore.
glibc: Remove bbappend
- The bug-20116 is already applied in 2.25
cynara,security-manager: Fix build error
- cynara: Replace bb.data to d
- security-manager: Temporarily use 'no' in APPLY variable
u-boot-ota: Add SRC_URI
- In pyro, SRC_URI and S is moved from .inc to .bb
linux-yocto: Remove 4.8 and 4.4 bbappend
- Yocto 2.3 (Pyro) doesn't support v4.8 kernel anymore.
- CVE patches in meta-agl-bsp are already applied in Yocto 2.3.
tcf-agent: Remove bbappend file
- This change is merged to upstream poky (pyro)
bluez5: Remove recipe and add .bbappend
- Yocto 2.3 (Pyro) already has same version.
- bluetooth.conf file is added in .bbappend
python-pycrypto: Remove recipe
- meta-openembedded (Pyro) already has same version.
meta-agl-bsp/classes/image.bbclass: Arrange for pyro
- image.bbclass is taken from poky/meta/classes/image.bbclass and only
changed IMAGE_TYPE_vm variable.
libsoup: Fix native build error temporarily
v2 (jsmoeller):
meta-agl-bsp/meta-ti:
- workaround patches in meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
- fix old python code in meta-ti/recipes-arago/ipumm-fw/ipumm-fw_3.00.13.00.bb
- workaround patches in meta-ti/recipes-arago/weston/weston_%.bbappend
- make specific to dra7xx-evm:
-- meta-ti/recipes-bsp/alsa-state/alsa-state.bbappend
-- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend
-- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio/dra7xx-evm-set-default-sink-source.patch
-- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
TODO/FIXME's in:
- meta-agl-bsp/meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
- meta-agl-bsp/meta-ti/recipes-arago/weston/weston_%.bbappend
- meta-agl-bsp/meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend
Bug-AGL: SPEC-646
Change-Id: I4162ae887d3334e9102575e3724483aa25f4bd9c
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10457
|
|
Backport of patches from upstream for 4.4
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=4b359430674caa2c98d0049a6941f157d2a33741
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=f41512c6acb71c63cf4e3bd50934365ae2a23891
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=1f2284fac2180d7a9442c796d9755e3ce7ab0bd9
Backport of patches from upstream for 4.9
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=cfc0eb403816c5c4f9667d959de5e22789b5421e
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=5d10ad6297260e9b85e7645ee544a6115bb229e4
- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=ce7fe8595902c3f03ef528c2dc1928b3f4b67fcf
Bug-AGL: SPEC-705
Change-Id: If330fb7de09ab00f84d35a1e4c5343f958fcbf56
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9857
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
v2 (jsmoeller): Add append files for boards that need special handling.
Change-Id: I172b71be6e825aa6399f22899e9b6eaacc86e72b
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9791
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
|
|
Breakout smack patchset files definitions into both 4.4
and 4.9 bbappends since the later only needs one of the patches.
Issue: SPEC-443
Change-Id: I04afcaf55da2f9aa735e6798ba60a00ba0838726
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
* Fix build for AGL
Change-Id: I2f799daab05dd295397d2ae05b7e9ab1d707128c
Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
|
|
This changeset patches the rpi with the needed changes to
allow bluetooth to work together with smack. The patches were
developed for porter and are a backport of patches submitted
for 4.10+ .
Bug-AGL: SPEC-293
Change-Id: I96d04a709de6ad7843840d9ae154f041173948a2
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Add ENABLE_CMA setting that enables required kernel configuration
to allow the dynamic CMA to function.
Change-Id: I0b0ab0fd7fd64454ea3cc9a89344a98897838e11
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Set CMDLINE_DEBUG in linux-raspberrypi_4.4.bbappend to disable the debug
logging by the kernel and systemd that was spamming the console. As a side
benefit, this noticeably speeds up booting.
Change-Id: Ic99b1626ea20a27d3d157bcb952ec30cd50baeb2
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Add kernel config fragments to enable support for the TP-Link TL-W722N
USB Wifi adapter on both Turbot and Porter, and RTL2832U DVB USB adapter
on Porter.
v2 (jsmoeller): Adapt linux-yocto bits and add rpi3 + vayu
- moving linux-yocto appends catches all the linux-yocto boards
- adding the fragments to the other boards likewise
- yet todo: sabre, wandboard
v3 (jsmoeller): remove leftover file://
Change-Id: Ic2c3255d9383ccfe8b24d034ef43779d120c5ee1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
This changeset simplifies the configuration of the rpi kernel
by using kernel_configure_variable in do_configure_append.
Due to an upstream bug, we need to repeat the final configuration call.
We also enable BLK_DEV_RAM, BLK_DEV_NBD and SMACK.
For this we also define an OVERRIDE for netboot.
v2: add conditional appends for netboot, sota, smack by using overrides.
Change-Id: I2a4a8fae6989246d715fc2fc71bb4c251f423bdb
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Yocto/OE layer that extends the recipes for mesa
and the supported Linux kernel for Raspberry Pi
for successful build of AGL with Wayland, Weston
and Qt. It is based on the existing ports of
Tizen and GENIVI Development Platform for
Raspberry Pi.
Change-Id: Icfed9e888c2abaf26c14ab402d0a90215862afbd
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
Leonid Lazarev
Scott Murray
Li Xiaoming
Leon Anavi
Jan-Simon Moeller
build.automotivelinux.org
Phong Tran
Tom Rini
zheng_wenlong
Changhyeok Bae
Romain Forlot
Matt Ranostay
Ronan