summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-raspberrypi/recipes-kernel
AgeCommit message (Collapse)AuthorFilesLines
23 hoursUpdate recipes for transition to UNPACKDIRScott Murray1-5/+5
Update recipes to handle the transition to using UNPACKDIR as the destination for unpacked files. For recipes that had been using S = WORKDIR, the approach used in meta-openembedded has been followed, i.e. using UNPACKDIR in tasks for consistency. Bug-AGL: SPEC-5147 Change-Id: I32e277e15e5aa1ac93dadc67199dedd148d3d0b9 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2024-04-26meta-agl-bsp: meta-raspberrypi: dtc: update bbappendDenys Dmytriyenko1-0/+0
meta-raspberrypi now has new version of dtc, so update bbappend accordingly Bug-AGL: SPEC-4578 Change-Id: Icf771530d0259cf2b3566877f29fe22d53288e79 Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
2024-03-07meta-agl-bsp: linux-raspberrypi: update local patchDenys Dmytriyenko1-3/+3
Update local patch that fixes menuconfig to apply against updated linux-raspberrypi kernel version. Bug-AGL: SPEC-5069 Change-Id: I341859acb4b77aff5ebce88da66089ac6263789f Signed-off-by: Denys Dmytriyenko <denys@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29719 ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account
2022-03-30meta-agl-bsp: Update Raspberry Pi create-combined-dtb recipeScott Murray1-30/+9
Update the create-combined-dtb recipe that creates merged dtb files for netbooting on the Pi 4 to handle the upstream kernel change to a separate Pi 4 specific version of the vc4-kms-v3d overlay (it now needs vc4-kms-v3d-pi4.dtbo). Also remove the Pi 3 support, as AGL no longer supports it. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I1c331dc3a752e3cc778d40f59dae693b60d5fc96
2022-03-30meta-agl-bsp: update Raspberry Pi dtc bbappendScott Murray1-0/+0
Upstream has upgrade to dtc 1.6.1, rename our local bbappend to match. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I72542846436838222e839c659cd75a27973aabed
2022-03-30meta-agl-bsp: remove linux-raspberrypi_5.4.bbappendScott Murray2-29/+0
Remove the Xen-specific linux-raspberry kernel bbappend and associated patch as they are no longer applicable to the default 5.10 kernel. Based on Xen project announcements, it is believed that Xen should work out of the box with 5.10 on Raspberry Pi 4, but that has not been tested as part of this upgrade. Bug-AGL: SPEC-3819 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I879f9ddb63f1ad83051df56f167d63c901a7b5e8
2021-08-23Convert to new override syntaxScott Murray4-11/+11
This is mostly the result of running a slightly customized version of the convert-overrides.py script from poky with additional overrides added. A few minor fixups were done by hand afterwards during a review of the changes. The intent of these changes is to minimize the effort to keep the "next" branch that builds against poky master up to date and tested in preparation for the switch to the next Yocto LTS release in early 2022. Bug-AGL: SPEC-4052 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia3bf63b7cb1aa1d95ada373d1a3ab56def0a125d Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26564 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-29Refactor kernel configuration fragment handlingScott Murray1-24/+16
Refactor the kernel configuration fragment handling to shift all AGL applied configuration fragments into a new AGL_KCONFIG_FRAGMENTS variable that is used to generate SRC_URI and KERNEL_CONFIG_FRAGMENTS additions for the various BSPs. The intent is to make it simple to disable AGL provided configuration in downstream builds as the IC EG has expressed as a requirement. Additionally, the rework has allowed for some clean up of accumulated cruft. In practice, clearing AGL_KCONFIG_FRAGMENTS drops all non-BSP provided kernel configuration with the exception of some qemu BSP related additions required for AGL CI and some explicitly configurable things like netboot support. Notable changes: - Instead of always using AGL's own fragment merging logic on top of the BSP kernel recipe, an effort is now made to leverage the BSP recipes' own merging schemes, so there are now separate include files for kernel-yocto.bbclass and plain kernel.bbclass based kernel recipes, as well as a common include file that defines the AGL_KCONFIG_FRAGMENTS variable and its derivations. That file can be included directly in bbappends for BSP kernel recipes that use the KERNEL_CONFIG_FRAGMENTS scheme (e.g. meta-ti, meta-qcom). - The SMACK enabling configuration in meta-app-framework has been updated to supply different fragments for enabling SMACK by default for 4.x and 5.x kernels. This removes a warning from always supplying the old configuration, and allows providing a CONFIG_LSM definition to ensure over-riding any BSP modifications. This allows removing the previous hack to handle CONFIG_LSM being set in the defconfigs in linux-raspberrypi. - By request, the linux-yocto support from meta-agl-bsp/meta-core has been rationalized into meta-agl-core to improve the experience when using meta-agl-core standalone for testing. - All demo supporting kernel configuration has been removed, a subsequent change to meta-agl-demo will add it there by leveraging AGL_KCONFIG_FRAGMENTS. - The hardware device support has been split out of the can-bus.cfg fragment, in favor of shifting it to meta-agl-demo. A few other stray non-CAN configuration options have also been removed from can-bus.cfg, as they do not seem to be required. Bug-AGL: SPEC-3983 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: If6662fd36e26cec767b1d53b1188a74d01ef9dcf Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26460 Reviewed-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2021-03-09meta-agl-bsp: clean up Raspberry Pi Xen supportScott Murray4-51/+13
Changes: - Rename bbappend for Xen support to work with 5.4 kernel. - Drop one of the Xen support patches that no longer applies, as it seems no longer required due to upstream changes. - Move Xen kernel configuration fragment use to non-versioned kernel bbappend to simplify future upgrades. - Move ENABLE_UART definition to machine template inc files instead of duplicating it in multiple bbappends. This is more in line with how upstream indicates it be used. Note that these changes have been compile tested with the agl-virt-xen feature, but the resulting image has not yet been tested with Xen. This is still an improvement, as agl-virt-xen would have silently not affected kernel configuration previously. As well, some of the reshuffling done here will simplify the kernel upgrade in the next branch. Bug-AGL: SPEC-3841 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I022cccef00fcd0a82ceef89d4aab1894004543a3 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26144 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-12linux-raspberrypi: Tidy patches & config fragmentsPaul Barker5-3/+0
Move all patches and config fragments into the linux-raspberrypi subdirectory to remove confusion and warnings seen for non-4.19 kernel versions: WARNING: .../bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb: Unable to get checksum for linux-raspberrypi SRC_URI entry 0001-mconf-menuconfig.patch: file could not be found WARNING: .../bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.4.bb: Unable to get checksum for linux-raspberrypi SRC_URI entry 0001-mconf-menuconfig.patch: file could not be found Bug-AGL: SPEC-3760 Cc: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: Iccb9efcd8240f28437e3494bd008dc9aca649c4e Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25887 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-11Fix bitbake -c menuconfig for linux-raspberrypiJan-Simon Moeller2-0/+49
This patch is included in linux-yocto to fix the cross-ncurses library issue. Add to meta-agl-bsp until resolved upstream. Bug-AGL: SPEC-3760 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iac9222a62ab943cce6176787b76cf0c2395688e8 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25882 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2021-01-11raspberrypi: dtc: Prevent overlays from modifying phandle propertiesPaul Barker2-0/+157
The cma-overlay fragment included in vc4-fkms-v3d-overlay ends up with a phandle property within the __overlay__ fragment due to the references to this fragment from the __overrides__ section. So when this overlay fragment is applied it was modifying the phandle of the target node, breaking other references to this node in the base dtb and breaking the resolution of symbols within the fdt. The failure is seen in the create-combined-dtb recipe but the best place to fix this is in libfdt itself. When applying an overlay fragment, if both the target node and the overlay fragment contain phandle properties we skip modification of the target node phandle. The included patch has been submitted upstream for review. Bug-AGL: SPEC-3702 Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: I0661de41162fa4f8eed8421878049b9027536b41 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25839 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Scott Murray <scott.murray@konsulko.com> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-17SPEC-3723: restructure meta-aglJan-Simon Moeller1-1/+1
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time. Trim dependencies and move most 'demo' related recipes to meta-agl-demo. v2: changed to bbapend + .inc , added description v3: testbuild of all images v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups. v5: rebased v6: merged meta-agl-distro into meta-agl-core, due to dependency on meta-oe, moved -test packagegroup and -qa images to own layer meta-agl-core-test v7: Fixed comments from Paul Barker v8: Update the markdown files v9: restore wayland/weston/agl-compositor recipes/appends, reworked to move app f/w specific changes to bbappends in meta-app-framework and only demo specific weston-init changes to meta-agl-demo v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend Description: This patch is part 1 out of 2 large patches that implement the layer rework discussed during the previous workshop. Essentially meta-agl-core is the small but versatile new core layer of AGL serving as basis for the work done by the IC and IVI EGs. All demo related work is moved to meta-agl-demo in the 2nd patchset. This should be applied together as atomic change. The resulting meta-agl/* follows these guidelines: - only bsp adaptations in meta-agl-bsp - remove the agl-profile-* layers for simplicity -- the packagegroup-agl(-profile)-graphical and so on have been kept in meta-agl-demo - meta-agl-profile-core is now meta-agl-core - meta-agl-core does pass yocto-check-layer -- therefore use the bbappend + conditional + .inc file construct found in meta-virtualization - meta-agl/meta-security has been merged into meta-agl/meta-app-framework - meta-netboot does pass yocto-check-layer - meta-pipewire does pass yocto-check-layer Migration: All packagegroups are preserved but they're now enabled by 'agl-demo'. Bug-AGL: SPEC-3723 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
2020-08-13meta-agl-bsp: meta-raspberrypi updates for YP 3.1.2Scott Murray1-1/+2
Changes include: - Rename bcm2835-bootfiles.bbappend to bootfiles.bbappend to match the recipe rename done in meta-raspberrypi - Update bootfile paths in rpi-config_git.bbappend to match the rename done in meta-raspberrypi - Remove local u-boot bbappend, as none of its changes are required with latest meta-raspberrypi and meta-updater - A previously silently failing command in the create-combined-dtb recipe's do_install when building with agl-sota enabled now triggers a build failure, logic has been added to handle meta-updater's disabling of the required overlay file. Bug-AGL: SPEC-3529 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ib5fd9f308fcd2da76ae882dd5b2413e56d3eee40 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25081 Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-05-26Raspberry 4: XEN supportLeonid Lazarev5-0/+132
Added the support for DOM0 in raspberry pi4. The feature agl-virt-xen should be enabled to activate this code. 1512 MB of memory is used for DOM0 machine. There are limitations: - brcmfmac module disabled (bluethooth and Wifi) due to the crash - total_memory is set to the 3Gb, as it impacts the USB ports on rasbperry pi4 on Linux kernel 4.19 v2 (jsmoeller): make changes in virtualization-layer conditional to raspberrypi4 Bug-AGL: SPEC-3259 Change-Id: I873fbf1f5498e31ae5f468407502f16e1873f7fc Signed-off-by: Leonid Lazarev <leonid.lazarev@mera.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24522 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-04-27meta-agl-bsp: update raspberrypi configuration for dunfellScott Murray1-6/+1
Changes: - Remove Mesa version over-ride, since dunfell has newer version. - Remove bcm2835-bootfiles SRCREV updates since dunfell has newer versions of the files. - Remove kernel SRCREV update in linux-raspberrypi_4.19.bbappend since dunfell has newer version, and add include of new linux-4.19-agl.inc to keep getting CAN qdisc patch. Bug-AGL: SPEC-3302 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I7f7a9b454de9eb4fae7075b30ee89b3aec4e6a43
2020-01-27meta-agl-bsp: meta-raspberrypi: handle zeus upgradeScott Murray9-211/+7
Remove backported u-boot, mesa, userland, and linux-raspberrypi recipes, tweaking local bbappends as required. Note that the linux-raspberrypi bump to 4.19.80 for rpi4 dual screen support is now handled via bbappend. Bug-AGL: SPEC-2932 Change-Id: I019633e86a921b9444bc718ac0557b04f25b27f4 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-11-27Enable pi 4 boot log on console output temporarilyLi Xiaoming1-0/+2
Although the rpi-config_git.bbappend enable ENABLE_UART_raspberrypi4 = "1", it seems make no effect. This patch is temporary solution, which can do some help to debug pi 4 boot issue. Bug-AGL: SPEC-2995 Change-Id: I0b634c4d8df576884b939ea259d4f8b7ca5330d7 Signed-off-by: Li Xiaoming <lixm.fnst@cn.fujitsu.com>
2019-11-05Generalize create-combined-dtb to use VC4DTBO from board configJan-Simon Moeller1-6/+22
and also add the rpi4. Bug-AGL: SPEC-2465 Bug-AGL: SPEC-2656 . Change-Id: Ied2dce914ecc539c7634214b571508d371116235 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-11-05linux-raspberrypi_4.19.bb: Update to 4.19.80Leon Anavi1-2/+2
Update Linux kernel for Raspberry Pi to 4.19.80. This version allows to run firmware KMS to support output through HDMI and DSI for the official 7" Raspberry Pi touch screen display. Bug-AGL: SPEC-2465 Change-Id: Ie854f8609196f986a1f9067da1010fb2e510e7c4 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-09-25raspberrypi4: Fix WiFiLeon Anavi2-0/+49
Apply patch from branch master of meta-raspberrypi as a bbappend to recipe linux-firmware-rpidistro to fix WiFi on Raspberry Pi 4. This is a temporary solution while AGL master is still based on Thud. As soon as AGL moves to newer release of the Yocto Project and layer meta-raspberrypi this patch will become reduntant. The change of boardflags3 value from "0x48200100" to "0x44200100" has been done already in Raspbian (2019-06-20). For more details: https://github.com/RPi-Distro/firmware-nonfree/issues/3 Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ifaafbae6ff59a43f95926e64f1ce35aefadd3cfa
2019-08-25Fix combined dtb names to match original filebuild.automotivelinux.org1-4/+4
Make the filenames conformant to the original files. Thanks to Khouloud Touil for finding this. Good catch! Change-Id: I1e4e95dc1148ddf1a9a3a09c22ceab75d1d88115 Bug-AGL: SPEC-2721 Signed-off-by: build.automotivelinux.org <jenkins@automotivelinux.org>
2019-08-12create-combined-dtb: Check if DTB files existLeon Anavi1-8/+20
Check if files exist before creating and deploying DTB. In some cases, for example with AGL SOTA, the DTB and DTBO files might not exist and without checks the recipe will fail. Bug-AGL: SPEC-2729, SPEC-1775 Change-Id: Id96e0c56989569feead076406534334766604cfd Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-07-24linux-raspberrypi: Add 4.19 for Raspberry Pi 4Leon Anavi5-1/+158
Add recipe for Linux kernel 4.19 for Raspberry Pi 4 and keep 4.14 for Raspberry Pi 3. The recipe for 4.19 is backported from master branch of the upstream of meta-raspberrypi. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I93bbc5527383e26862894859bff6e44a6bc17966 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-07-13Revert "Fix rpi touchscreen support on master"Jan-Simon Moeller6-1099/+2
We need to reconsider this changeset. It seems to produce a regression. This reverts commit ccb667c35ffdea7a2bc1304750e6b22368cd55f7. Change-Id: I42754a899e8530f4e18a069ed227f18a8d615801
2019-06-05Fix rpi touchscreen support on masterJan-Simon Möller6-2/+1099
We seem to miss a few bits that changed between kernel 4.9 and kernel 4.14 regarding the 7'' touchscreen. One addition is the rpi-backlight.dtbo which we also need to use in our create-combined-dtb recipe for CI use. We also seem to require https://github.com/raspberrypi/linux/pull/2693#issue-217750943 . Thanks to Scott Murray for the help digging through this. v2 and v3: add devicetree changes v4 and v5: fix name of dtbo v6: move append to machine include - we need it as a global var v7: add to config.txt for sdcard boot case Bug-AGL: SPEC-2465 Change-Id: I2bb3cd974b74a790292e1f36ffdca034928e0bca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-24On master enable the CONFIG_USB_NET_SMSC75XX driverbuild.automotivelinux.org1-3/+3
This is for the 3b+ board. Change-Id: I428a12b836c1f7c3f01b29602e666ae28efd647f Bug-AGL: SPEC-2456 Signed-off-by: build.automotivelinux.org <jenkins@automotivelinux.org>
2019-04-11Add rpi network drivers by defaultJan-Simon Möller2-0/+9
This is needed for network booting. Change-Id: Iecee73a3b0bf31c3c68bb4beea1f41d07c9b5ec5 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-04Upgrade to thudScott Murray7-79/+16
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-11-29create-combined-dtb: Add dependency on virtual/kernelLeon Anavi1-0/+2
Add a dependency to virtual/kernel:do_deploy to ensure that the dtb and dtbo files needed for task compile will be present. Bug-AGL: SPEC-1775 Change-Id: I2d5872fe6bbd9a40c3f4185eea0efc10e6100b8b Reported-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-22create-combined-dtb: Combine dtb and dtboLeon Anavi1-0/+33
Combine a number of device tree overlays to a base blob with a specified filename in the deploydir only. This feature is required only for netboot therefore the files are not included in the image. Bug-AGL: SPEC-1775 Change-Id: I16ff043ee0d44d4151e1fb2ba714bd1542854bd8 Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-22fdtoverlay: Provide fdtoverlay-nativeLeon Anavi3-0/+62
Add a recipe for building fdtoverlay native from the source code of newer dtc without upgrading the version of the main dtc recipe. Bug-AGL: SPEC-1775 Change-Id: I251b22e0ecd4d2de088340daf19b602670668d55 Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-20linux-firmware_%.bbappend: Avoid rpi file duplicationLeon Anavi1-0/+5
In releases based on Yocto/OE Rocko firmware files for bcm43430 and bcm43455 are provided by linux-firmware-raspbian. This fix avoids duplication of firmware files for Raspberry Pi 3 Model B and B+ while building agl-demo-platform-crosssdk. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ic9e918f4ffd915b148530bb8e6bf9a6dc6a61c02 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-18agl_raspberrypi3.inc: WiFi on Raspberry Pi 3 B & B+Leon Anavi4-118/+0
Use linux-firmware-raspbian packages for bcm43430 and bcm43455. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ib634ee3351fa91d8d1704656f4a40d1b40cd05e3 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-08-14linux-firmware: Enable WiFi for Raspberry Pi 3 B+Leon Anavi4-0/+118
Add binary blobs for brcmfmac43455 to enable WiFi for the new Raspberry Pi 3 Model 3 B+. At the moment meta-raspberrypi provides this for latest releases but not for Rocko. This fix should remain in meta-agl until AGL moves to sumo or until we backport the required changes to meta-raspberrypi branch rocko. Bug-AGL: SPEC-1652 Change-Id: I644938ac3799b0e831f022fff9b2bc85aa8fd27c Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-04-03Add hci uart ko cfg for rpi3 on board bluetoothPhong Tran2-0/+16
Enable HCI UART for fixing current lacking of hci-uart.ko which made brcm43438.service fails to start. Change-Id: I0905820daa4bc1b36f2677f2f685f17a71fe11e6 Signed-off-by: Phong Tran <tranmanphong@gmail.com>
2017-11-22Rework Linux Kernel fragment applicationsTom Rini4-145/+8
- All kernel recipes must inherit linux-agl.inc - All kernel recipes for a given version (e.g. 4.9) should include linux-VER-agl.inc in order to avoid duplication (such as the SMACK label patch or security fixes) - We enforce having merge_config.sh be invoked at the end, in order to make sure fragments will be applied. - Add a new fragment for Raspberry Pi to ensure the Pi Touchscreen is still enabled. With all of the above, we fix a number of minor issues as well, such as platforms manually enabling NBD/RAMDISK for netboot as the previous logic was not working in all cases. Bug-AGL: SPEC-946 Change-Id: Ic688e899df5861d83712af12d8e1c6c3c9643300 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12063 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: José Bollo <jobol@nonadev.net> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-28Add joystick.cfg for usb joystick and steering-wheel kernel configurezheng_wenlong1-0/+3
Add joystick.cfg into meta-agl-bsp/recipes-kernel, Then include this cfg in each board bbappend. Related commit: https://gerrit.automotivelinux.org/gerrit/#/c/10463/ Change-Id: Ie484cc8017e7198cefa0d8e7476032c325a8348d Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11575 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-09-18Add uvc.cfg for usb video class kernel configurezheng_wenlong1-0/+3
Add uvc.cfg into meta-agl-bsp/recipes-kernel, Then include this cfg in each board bbappend. See: https://gerrit.automotivelinux.org/gerrit/#/c/10803/ Change-Id: I5faebefef3560a27496103e1ad4a1ca70377a1ba Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10893 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-09-08Upgrade to pyroChanghyeok Bae11-2208/+1
u-boot: v2017.01 dlt-daemon: Remove gzipnative inheritance - gzipnative.bbclass is removed in pyro branch. - See ab0f46400c113c0d893be872727a67739d5e794d in poky. gpm: Remove bbappend file - upstream(meta-openembedded) is using git(v1.99.7) and this is not required anymore. gnutls: Remove bbappend file - The patch is already applied in upstream. agl-image-minimal: Remove ROOTFS_PKGMANAGE_BOOTSTRAP - ROOTFS_PKGMANAGE_BOOTSTRAP is removed in upstream. - Please see 529244ee212fe14019e35a5f163fab705ddbf141 in poky. freetype: Change hash value for v2.7.1 binary shadow: Remove shadow_%.bbappend - It's already applied upstream poky. Remove nativesdk-packagegroup-sdk-host.bbappend - It's already applied in upstream poky. faac: Remove bbappend file - It's already applied meta-openembedded upstream. pulseaudio: Change bbappend naming - Upstream yocto provides pulseaudio v10.0. weston: re-create patch to apply new version (v2.0.0) - Remove 0001-compositor-drm.c-Launch-without-input-devices.patch because it's already applied in new version. mesa: Remove 12.0.3 recipe and fix build error for qemux86-64 - Yocto upstream supports 17.0.2 and v12.0.3 is not required anymore in raspberrypi - Error: | configure: error: --enable-gallium-llvm selected but llvm-config is not found wayland-ivi-extension: Upgrade to latest master version - Due to weston upgrade, wayland-ivi-extension should be upgraded. packagegroup-ivi-common-core-multimedia: Remove alsa-lib - alsa-lib has empty package and it's not required anymore. Add agl-driver and agl-passenger in group and passwd - Parsing Error: agl-users: groupname agl-passenger does not have a static ID defined. poky-agl.conf: Change gstreamer default version to v1.10.x - Yocto upstream moves gstreamer to v1.10.4. af-main: Fix build error - Error: file /usr/local conflicts between attempted installs of af-main-1.0-r0.corei7_64 and base-files-3.0.14-r89.qemux86_64 intel-corei7-64: Change gstreamer-vaapi-1.0 name - gstreamer-vaapi-1.0 is moved to oe-core and its name is changed to gstreamer1.0-vaapi. linux-raspberrypi: Drop 4.4 bbappend - The upstream meta-raspberrypi doesn't support v4.4 anymore. - CVE patches are not required anymore. glibc: Remove bbappend - The bug-20116 is already applied in 2.25 cynara,security-manager: Fix build error - cynara: Replace bb.data to d - security-manager: Temporarily use 'no' in APPLY variable u-boot-ota: Add SRC_URI - In pyro, SRC_URI and S is moved from .inc to .bb linux-yocto: Remove 4.8 and 4.4 bbappend - Yocto 2.3 (Pyro) doesn't support v4.8 kernel anymore. - CVE patches in meta-agl-bsp are already applied in Yocto 2.3. tcf-agent: Remove bbappend file - This change is merged to upstream poky (pyro) bluez5: Remove recipe and add .bbappend - Yocto 2.3 (Pyro) already has same version. - bluetooth.conf file is added in .bbappend python-pycrypto: Remove recipe - meta-openembedded (Pyro) already has same version. meta-agl-bsp/classes/image.bbclass: Arrange for pyro - image.bbclass is taken from poky/meta/classes/image.bbclass and only changed IMAGE_TYPE_vm variable. libsoup: Fix native build error temporarily v2 (jsmoeller): meta-agl-bsp/meta-ti: - workaround patches in meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend - fix old python code in meta-ti/recipes-arago/ipumm-fw/ipumm-fw_3.00.13.00.bb - workaround patches in meta-ti/recipes-arago/weston/weston_%.bbappend - make specific to dra7xx-evm: -- meta-ti/recipes-bsp/alsa-state/alsa-state.bbappend -- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend -- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio/dra7xx-evm-set-default-sink-source.patch -- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend TODO/FIXME's in: - meta-agl-bsp/meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend - meta-agl-bsp/meta-ti/recipes-arago/weston/weston_%.bbappend - meta-agl-bsp/meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend - meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend Bug-AGL: SPEC-646 Change-Id: I4162ae887d3334e9102575e3724483aa25f4bd9c Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10457
2017-06-29Fix CVE-2017-1000364 by backporting the patches for rpi3Jan-Simon Möller9-0/+2053
Backport of patches from upstream for 4.4 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=4b359430674caa2c98d0049a6941f157d2a33741 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=f41512c6acb71c63cf4e3bd50934365ae2a23891 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=1f2284fac2180d7a9442c796d9755e3ce7ab0bd9 Backport of patches from upstream for 4.9 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=cfc0eb403816c5c4f9667d959de5e22789b5421e - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=5d10ad6297260e9b85e7645ee544a6115bb229e4 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=ce7fe8595902c3f03ef528c2dc1928b3f4b67fcf Bug-AGL: SPEC-705 Change-Id: If330fb7de09ab00f84d35a1e4c5343f958fcbf56 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9857 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Leon Anavi <leon.anavi@konsulko.com>
2017-06-28Add CAN drivers by default to AGL boardsRomain Forlot1-6/+39
v2 (jsmoeller): Add append files for boards that need special handling. Change-Id: I172b71be6e825aa6399f22899e9b6eaacc86e72b Signed-off-by: Romain Forlot <romain.forlot@iot.bzh> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9791 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2017-02-14raspberrypi-linux: add smack patchset to 4.9 bbappendMatt Ranostay3-75/+78
Breakout smack patchset files definitions into both 4.4 and 4.9 bbappends since the later only needs one of the patches. Issue: SPEC-443 Change-Id: I04afcaf55da2f9aa735e6798ba60a00ba0838726 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2017-01-26Jump kernel of rasb3 from V4.4.16 to V4.4.43Ronan1-4/+0
* Fix build for AGL Change-Id: I2f799daab05dd295397d2ae05b7e9ab1d707128c Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2017-01-06Apply bluetooth/smack patches also to rpi kernelJan-Simon Möller5-0/+208
This changeset patches the rpi with the needed changes to allow bluetooth to work together with smack. The patches were developed for porter and are a backport of patches submitted for 4.10+ . Bug-AGL: SPEC-293 Change-Id: I96d04a709de6ad7843840d9ae154f041173948a2 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-12-29linux-raspberrypi: add ENABLE_CMA options to kernel command lineMatt Ranostay1-0/+3
Add ENABLE_CMA setting that enables required kernel configuration to allow the dynamic CMA to function. Change-Id: I0b0ab0fd7fd64454ea3cc9a89344a98897838e11 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2016-12-28meta-raspberrypi: disable debug loggingScott Murray1-1/+1
Set CMDLINE_DEBUG in linux-raspberrypi_4.4.bbappend to disable the debug logging by the kernel and systemd that was spamming the console. As a side benefit, this noticeably speeds up booting. Change-Id: Ic99b1626ea20a27d3d157bcb952ec30cd50baeb2 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2016-11-16Add support for CES 2017 demo hardwareScott Murray1-0/+10
Add kernel config fragments to enable support for the TP-Link TL-W722N USB Wifi adapter on both Turbot and Porter, and RTL2832U DVB USB adapter on Porter. v2 (jsmoeller): Adapt linux-yocto bits and add rpi3 + vayu - moving linux-yocto appends catches all the linux-yocto boards - adding the fragments to the other boards likewise - yet todo: sabre, wandboard v3 (jsmoeller): remove leftover file:// Change-Id: Ic2c3255d9383ccfe8b24d034ef43779d120c5ee1 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-10-31Use kernel_configure_variable in append for rpiJan-Simon Möller2-43/+46
This changeset simplifies the configuration of the rpi kernel by using kernel_configure_variable in do_configure_append. Due to an upstream bug, we need to repeat the final configuration call. We also enable BLK_DEV_RAM, BLK_DEV_NBD and SMACK. For this we also define an OVERRIDE for netboot. v2: add conditional appends for netboot, sota, smack by using overrides. Change-Id: I2a4a8fae6989246d715fc2fc71bb4c251f423bdb Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-09-25meta-raspberrypi: AGL support for Raspberry PiLeon Anavi3-0/+93
Yocto/OE layer that extends the recipes for mesa and the supported Linux kernel for Raspberry Pi for successful build of AGL with Wayland, Weston and Qt. It is based on the existing ports of Tizen and GENIVI Development Platform for Raspberry Pi. Change-Id: Icfed9e888c2abaf26c14ab402d0a90215862afbd Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>