aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-raspberrypi
AgeCommit message (Collapse)AuthorFilesLines
2021-01-12meta-agl-core: Revise weston-ini-conf mechanismScott Murray1-2/+2
The recent layer reorganization broke the landscape vs portrait scheme based on bbappend'ing the weston-ini-conf recipe in the previous cluster and html5 demo layers. To fix this and to facilitate being able to easily build the mix of demo platform images, the weston.ini generation mechanism in the weston-ini-conf has been revised to build multiple packages. Instead of relying on SRC_URI to install weston.ini fragments into WORKDIR and grabbing all of them with a *.cfg glob, an explicit list built from new WESTON_FRAGMENTS and WESTON_DISPLAYS variables is used. The fragments listed in WESTON_FRAGMENTS are used to generate both weston-ini-conf and weston-ini-conf-landscape packages containing uniquely named files (weston.ini.default and weston.ini.landscape, respectively), and the OE update-alternatives mechanism is used to have weston.ini point at the appropriate file on installation. For now, the two packages are explicitly marked as incompatible with one another, but this could be tweaked in the future if switching between them on target is desired. Additional notes: - A RPROVIDES of "weston-ini" has been defined for the weston-ini-conf packages and a RDEPENDS on it added to weston-init. This should allow members to drop in a complete alternative solution while still having a dependency chain. - The various meta-agl-bsp bbappends of weston-ini-conf have for the most part been updated to yield the same behavior as before, though with an eye towards using machine overrides to ease multiconfig usage down the road. This includes the currently unused Raspberry Pi touchscreen support, which has been left since it may still see use. - An exception to the above, however, is that the support for the touchscreen on the dra7 EVM has been removed, as upstream dropped the support for the screen on the available test hardware and at present it only seems feasible to support external HDMI monitors. - The unused fbdev fragment used to support meta-freescale in the past has been removed. - The virtual and virtual-landscape fragments have been renamed to virtual-270 and virtual-0 to better indicate the orientation and match the naming used for the other fragments. It is likely that future work will need to split the display enabling and orientation aspects, as the current tying together of the two results in configurations somewhat overly specific to the actual AGL demo systems. Bug-AGL: SPEC-3745 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I2a968781182a346c1d483cca4fd7337679e58118 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25860 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-11Fix bitbake -c menuconfig for linux-raspberrypiJan-Simon Moeller2-0/+49
This patch is included in linux-yocto to fix the cross-ncurses library issue. Add to meta-agl-bsp until resolved upstream. Bug-AGL: SPEC-3760 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iac9222a62ab943cce6176787b76cf0c2395688e8 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25882 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2021-01-11raspberrypi: dtc: Prevent overlays from modifying phandle propertiesPaul Barker2-0/+157
The cma-overlay fragment included in vc4-fkms-v3d-overlay ends up with a phandle property within the __overlay__ fragment due to the references to this fragment from the __overrides__ section. So when this overlay fragment is applied it was modifying the phandle of the target node, breaking other references to this node in the base dtb and breaking the resolution of symbols within the fdt. The failure is seen in the create-combined-dtb recipe but the best place to fix this is in libfdt itself. When applying an overlay fragment, if both the target node and the overlay fragment contain phandle properties we skip modification of the target node phandle. The included patch has been submitted upstream for review. Bug-AGL: SPEC-3702 Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: I0661de41162fa4f8eed8421878049b9027536b41 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25839 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Scott Murray <scott.murray@konsulko.com> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-17SPEC-3723: restructure meta-aglJan-Simon Moeller1-1/+1
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time. Trim dependencies and move most 'demo' related recipes to meta-agl-demo. v2: changed to bbapend + .inc , added description v3: testbuild of all images v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups. v5: rebased v6: merged meta-agl-distro into meta-agl-core, due to dependency on meta-oe, moved -test packagegroup and -qa images to own layer meta-agl-core-test v7: Fixed comments from Paul Barker v8: Update the markdown files v9: restore wayland/weston/agl-compositor recipes/appends, reworked to move app f/w specific changes to bbappends in meta-app-framework and only demo specific weston-init changes to meta-agl-demo v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend Description: This patch is part 1 out of 2 large patches that implement the layer rework discussed during the previous workshop. Essentially meta-agl-core is the small but versatile new core layer of AGL serving as basis for the work done by the IC and IVI EGs. All demo related work is moved to meta-agl-demo in the 2nd patchset. This should be applied together as atomic change. The resulting meta-agl/* follows these guidelines: - only bsp adaptations in meta-agl-bsp - remove the agl-profile-* layers for simplicity -- the packagegroup-agl(-profile)-graphical and so on have been kept in meta-agl-demo - meta-agl-profile-core is now meta-agl-core - meta-agl-core does pass yocto-check-layer -- therefore use the bbappend + conditional + .inc file construct found in meta-virtualization - meta-agl/meta-security has been merged into meta-agl/meta-app-framework - meta-netboot does pass yocto-check-layer - meta-pipewire does pass yocto-check-layer Migration: All packagegroups are preserved but they're now enabled by 'agl-demo'. Bug-AGL: SPEC-3723 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
2020-08-13meta-agl-bsp: meta-raspberrypi updates for YP 3.1.2Scott Murray5-106/+18
Changes include: - Rename bcm2835-bootfiles.bbappend to bootfiles.bbappend to match the recipe rename done in meta-raspberrypi - Update bootfile paths in rpi-config_git.bbappend to match the rename done in meta-raspberrypi - Remove local u-boot bbappend, as none of its changes are required with latest meta-raspberrypi and meta-updater - A previously silently failing command in the create-combined-dtb recipe's do_install when building with agl-sota enabled now triggers a build failure, logic has been added to handle meta-updater's disabling of the required overlay file. Bug-AGL: SPEC-3529 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ib5fd9f308fcd2da76ae882dd5b2413e56d3eee40 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25081 Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-21meta-agl-bsp: Remove Raspberry Pi 720p over-rideScott Murray1-4/+0
Remove weston.ini config fragment over-ride to force 720p that has been done for Raspberry Pi since scaling to screen size has been dropped with the switch to the new compositor. Raspberry Pi 4 is capable of running at 1080p without the memory issues of the Pi 3, so the scaling is not necessary for it, anyways. Bug-AGL: SPEC-3455 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ib7cac877491cfe492fbc9a4ed49c4ff98f080667 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25038 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-05-26Raspberry 4: XEN supportLeonid Lazarev8-0/+200
Added the support for DOM0 in raspberry pi4. The feature agl-virt-xen should be enabled to activate this code. 1512 MB of memory is used for DOM0 machine. There are limitations: - brcmfmac module disabled (bluethooth and Wifi) due to the crash - total_memory is set to the 3Gb, as it impacts the USB ports on rasbperry pi4 on Linux kernel 4.19 v2 (jsmoeller): make changes in virtualization-layer conditional to raspberrypi4 Bug-AGL: SPEC-3259 Change-Id: I873fbf1f5498e31ae5f468407502f16e1873f7fc Signed-off-by: Leonid Lazarev <leonid.lazarev@mera.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24522 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-04-27meta-agl-bsp: update raspberrypi configuration for dunfellScott Murray3-17/+1
Changes: - Remove Mesa version over-ride, since dunfell has newer version. - Remove bcm2835-bootfiles SRCREV updates since dunfell has newer versions of the files. - Remove kernel SRCREV update in linux-raspberrypi_4.19.bbappend since dunfell has newer version, and add include of new linux-4.19-agl.inc to keep getting CAN qdisc patch. Bug-AGL: SPEC-3302 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I7f7a9b454de9eb4fae7075b30ee89b3aec4e6a43
2020-01-27meta-agl-bsp: meta-raspberrypi: handle zeus upgradeScott Murray42-3262/+7
Remove backported u-boot, mesa, userland, and linux-raspberrypi recipes, tweaking local bbappends as required. Note that the linux-raspberrypi bump to 4.19.80 for rpi4 dual screen support is now handled via bbappend. Bug-AGL: SPEC-2932 Change-Id: I019633e86a921b9444bc718ac0557b04f25b27f4 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-11-27Enable pi 4 boot log on console output temporarilyLi Xiaoming1-0/+2
Although the rpi-config_git.bbappend enable ENABLE_UART_raspberrypi4 = "1", it seems make no effect. This patch is temporary solution, which can do some help to debug pi 4 boot issue. Bug-AGL: SPEC-2995 Change-Id: I0b634c4d8df576884b939ea259d4f8b7ca5330d7 Signed-off-by: Li Xiaoming <lixm.fnst@cn.fujitsu.com>
2019-11-05Generalize create-combined-dtb to use VC4DTBO from board configJan-Simon Moeller1-6/+22
and also add the rpi4. Bug-AGL: SPEC-2465 Bug-AGL: SPEC-2656 . Change-Id: Ied2dce914ecc539c7634214b571508d371116235 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2019-11-05bcm2835-bootfiles.bbappend: Update firmwareLeon Anavi1-8/+8
Update the firmware to support Linux kernel 4.19.80 for Raspberry Pi 3 B/B+ and 4. This way both the HDMI and the official 7" Raspberry Pi touch screen display are supported. Bug-AGL: SPEC-2465 Change-Id: Idb028b8abca5a44da2783def8af2c28f04de66d2 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-05linux-raspberrypi_4.19.bb: Update to 4.19.80Leon Anavi1-2/+2
Update Linux kernel for Raspberry Pi to 4.19.80. This version allows to run firmware KMS to support output through HDMI and DSI for the official 7" Raspberry Pi touch screen display. Bug-AGL: SPEC-2465 Change-Id: Ie854f8609196f986a1f9067da1010fb2e510e7c4 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-11-04rpi-config: Set max_framebuffers to 2 to support dual displayChanghyeok Bae1-0/+5
Change-Id: Id9ca08ede2aedbc122a04d97ca4bb5bd8478b717 Signed-off-by: Changhyeok Bae <changhyeok.bae@daimler.com>
2019-10-28Add missing space in SRC_URI_append statementJan-Simon Möller1-1/+1
This fixes SPEC-2922. Bug-AGL: SPEC-2922 . Change-Id: I978c3d28e6d62885cd95ca6f2d2b32d34fa6933d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> (cherry picked from commit 8a052edd56f801c465781b784bf1f53b15135c86)
2019-09-25raspberrypi4: Fix WiFiLeon Anavi2-0/+49
Apply patch from branch master of meta-raspberrypi as a bbappend to recipe linux-firmware-rpidistro to fix WiFi on Raspberry Pi 4. This is a temporary solution while AGL master is still based on Thud. As soon as AGL moves to newer release of the Yocto Project and layer meta-raspberrypi this patch will become reduntant. The change of boardflags3 value from "0x48200100" to "0x44200100" has been done already in Raspbian (2019-06-20). For more details: https://github.com/RPi-Distro/firmware-nonfree/issues/3 Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ifaafbae6ff59a43f95926e64f1ce35aefadd3cfa
2019-09-20raspberrypi4: enable v3d and dependencies in mesaJan-Simon Möller1-0/+2
To enable the gfx acceleration, enable the necessary flags in mesa. Bug-AGL: SPEC-2656 Change-Id: I8bfb2f4034679f4703ddcb4bdb4c1363eee3d9d4 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-09-19mesa: Upgrade Mesa for Raspberry Pi 4Leon Anavi16-0/+2080
Bring Mesa 19.1.6 to meta-agl-bsp/meta-raspberrypi because there are driver issues with Mesa 18.1 for Raspberry Pi 4. The recipes for this new version are coming from the master branch of layer openembedded-core. With the newer version of Mesa Weston works fine on Raspberry Pi 4 and the home screen appears as expected. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I0d4f6e6fdff3c6ac54a72d19abfc292efcea7a3f
2019-09-13u-boot-2019.07: Fix for Raspberry Pi 4Leon Anavi10-5/+514
Following recent changes in the BSP the recipe for u-boot 2019.07 was failing to build for Raspberry Pi 4. This fix brings existing patches from master branch of meta-raspberrypi to AGL which is still based on Yocto project release Thud. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ic544d02032198dc05da24bc3246e8911d300c1ea Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-08-25Fix combined dtb names to match original filebuild.automotivelinux.org1-4/+4
Make the filenames conformant to the original files. Thanks to Khouloud Touil for finding this. Good catch! Change-Id: I1e4e95dc1148ddf1a9a3a09c22ceab75d1d88115 Bug-AGL: SPEC-2721 Signed-off-by: build.automotivelinux.org <jenkins@automotivelinux.org>
2019-08-12uEnv.txt: Modify uEnv.txt for SOTALeon Anavi2-14/+42
Modify uEnv.txt and uEnv.cma.txt according to the recent changes in layers meta-updater and meta-updater-raspberrypi to ensure that AGL image with agl-sota feature will boot properly on Raspberry Pi 3 B/B+. Bug-AGL: SPEC-2729 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ib8fe74bcd6e12208aaddc81f608fe84eee9de601
2019-08-12u-boot_2019.07.bbappend: Apply patch for AGL SOTALeon Anavi2-0/+88
Recently we have updated u-boot to version 2019.07 to support Raspberry Pi 4 in AGL based on Yocto release Thud. Therefore a new version of the patch from meta-updater-raspberrypi branch warrior has to be applied to successfully build U-Boot when feature agl-sota is enabled. Bug-AGL: SPEC-2729 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ie72cc9b81ff6e041cfe6edb26f383b7e0d43d8f9
2019-08-12create-combined-dtb: Check if DTB files existLeon Anavi1-8/+20
Check if files exist before creating and deploying DTB. In some cases, for example with AGL SOTA, the DTB and DTBO files might not exist and without checks the recipe will fail. Bug-AGL: SPEC-2729, SPEC-1775 Change-Id: Id96e0c56989569feead076406534334766604cfd Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-07-24bcm2835-bootfiles.bbappend: Support Raspberry Pi 4Leon Anavi1-0/+11
Use different bootfiles if the machine has been set to the new Raspberry Pi 4 and keep the old files for Raspberry Pi 3. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I3cbacc45c0f82ce2c70641c008ad2975a9e58fbd
2019-07-24rpi-config_git.bbappend: Update for Raspberry Pi 4Leon Anavi1-0/+20
Extend the deploy task to support Rasppberry Pi 4. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I3a166a873b431539e154ef6a2b1e69df02a0f2a3
2019-07-24u-boot_2019.07: Bootloader for Raspberry Pi 4Leon Anavi6-0/+457
Add U-Boot version that supports Raspberry Pi 4. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: Ib550e38c7ecaf0ab2149b04666cffdcbaaf08134
2019-07-24linux-raspberrypi: Add 4.19 for Raspberry Pi 4Leon Anavi5-1/+158
Add recipe for Linux kernel 4.19 for Raspberry Pi 4 and keep 4.14 for Raspberry Pi 3. The recipe for 4.19 is backported from master branch of the upstream of meta-raspberrypi. Bug-AGL: SPEC-2656 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Change-Id: I93bbc5527383e26862894859bff6e44a6bc17966 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2019-07-13Revert "Fix rpi touchscreen support on master"Jan-Simon Moeller8-1112/+4
We need to reconsider this changeset. It seems to produce a regression. This reverts commit ccb667c35ffdea7a2bc1304750e6b22368cd55f7. Change-Id: I42754a899e8530f4e18a069ed227f18a8d615801
2019-06-05Fix rpi touchscreen support on masterJan-Simon Möller8-4/+1112
We seem to miss a few bits that changed between kernel 4.9 and kernel 4.14 regarding the 7'' touchscreen. One addition is the rpi-backlight.dtbo which we also need to use in our create-combined-dtb recipe for CI use. We also seem to require https://github.com/raspberrypi/linux/pull/2693#issue-217750943 . Thanks to Scott Murray for the help digging through this. v2 and v3: add devicetree changes v4 and v5: fix name of dtbo v6: move append to machine include - we need it as a global var v7: add to config.txt for sdcard boot case Bug-AGL: SPEC-2465 Change-Id: I2bb3cd974b74a790292e1f36ffdca034928e0bca Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-05-24On master enable the CONFIG_USB_NET_SMSC75XX driverbuild.automotivelinux.org1-3/+3
This is for the 3b+ board. Change-Id: I428a12b836c1f7c3f01b29602e666ae28efd647f Bug-AGL: SPEC-2456 Signed-off-by: build.automotivelinux.org <jenkins@automotivelinux.org>
2019-04-11Add rpi network drivers by defaultJan-Simon Möller2-0/+9
This is needed for network booting. Change-Id: Iecee73a3b0bf31c3c68bb4beea1f41d07c9b5ec5 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-04Upgrade to thudScott Murray9-79/+22
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-11-29create-combined-dtb: Add dependency on virtual/kernelLeon Anavi1-0/+2
Add a dependency to virtual/kernel:do_deploy to ensure that the dtb and dtbo files needed for task compile will be present. Bug-AGL: SPEC-1775 Change-Id: I2d5872fe6bbd9a40c3f4185eea0efc10e6100b8b Reported-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-22create-combined-dtb: Combine dtb and dtboLeon Anavi1-0/+33
Combine a number of device tree overlays to a base blob with a specified filename in the deploydir only. This feature is required only for netboot therefore the files are not included in the image. Bug-AGL: SPEC-1775 Change-Id: I16ff043ee0d44d4151e1fb2ba714bd1542854bd8 Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-22fdtoverlay: Provide fdtoverlay-nativeLeon Anavi3-0/+62
Add a recipe for building fdtoverlay native from the source code of newer dtc without upgrading the version of the main dtc recipe. Bug-AGL: SPEC-1775 Change-Id: I251b22e0ecd4d2de088340daf19b602670668d55 Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-29weston-ini-conf.bbappend: Set 720p for Raspberry PiLeon Anavi2-0/+11
Reduce the screen resolution for Raspberry Pi from Full HD to HD Ready (1280x720) to reduce the memory consumption and improve the behaviour of the whole system. This change is applied only for HDMI display on Raspberry Pi due to the limited hardware resources. Bug-AGL: SPEC-1745 Change-Id: Id2fb571b0822f8166086f5ad6a7fcf8ea25c933a Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-20linux-firmware_%.bbappend: Avoid rpi file duplicationLeon Anavi1-0/+5
In releases based on Yocto/OE Rocko firmware files for bcm43430 and bcm43455 are provided by linux-firmware-raspbian. This fix avoids duplication of firmware files for Raspberry Pi 3 Model B and B+ while building agl-demo-platform-crosssdk. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ic9e918f4ffd915b148530bb8e6bf9a6dc6a61c02 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-18agl_raspberrypi3.inc: WiFi on Raspberry Pi 3 B & B+Leon Anavi4-118/+0
Use linux-firmware-raspbian packages for bcm43430 and bcm43455. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ib634ee3351fa91d8d1704656f4a40d1b40cd05e3 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-08-14linux-firmware: Enable WiFi for Raspberry Pi 3 B+Leon Anavi4-0/+118
Add binary blobs for brcmfmac43455 to enable WiFi for the new Raspberry Pi 3 Model 3 B+. At the moment meta-raspberrypi provides this for latest releases but not for Rocko. This fix should remain in meta-agl until AGL moves to sumo or until we backport the required changes to meta-raspberrypi branch rocko. Bug-AGL: SPEC-1652 Change-Id: I644938ac3799b0e831f022fff9b2bc85aa8fd27c Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-04-03Add hci uart ko cfg for rpi3 on board bluetoothPhong Tran2-0/+16
Enable HCI UART for fixing current lacking of hci-uart.ko which made brcm43438.service fails to start. Change-Id: I0905820daa4bc1b36f2677f2f685f17a71fe11e6 Signed-off-by: Phong Tran <tranmanphong@gmail.com>
2017-11-22Rework Linux Kernel fragment applicationsTom Rini4-145/+8
- All kernel recipes must inherit linux-agl.inc - All kernel recipes for a given version (e.g. 4.9) should include linux-VER-agl.inc in order to avoid duplication (such as the SMACK label patch or security fixes) - We enforce having merge_config.sh be invoked at the end, in order to make sure fragments will be applied. - Add a new fragment for Raspberry Pi to ensure the Pi Touchscreen is still enabled. With all of the above, we fix a number of minor issues as well, such as platforms manually enabling NBD/RAMDISK for netboot as the previous logic was not working in all cases. Bug-AGL: SPEC-946 Change-Id: Ic688e899df5861d83712af12d8e1c6c3c9643300 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/12063 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: José Bollo <jobol@nonadev.net> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-28Add joystick.cfg for usb joystick and steering-wheel kernel configurezheng_wenlong1-0/+3
Add joystick.cfg into meta-agl-bsp/recipes-kernel, Then include this cfg in each board bbappend. Related commit: https://gerrit.automotivelinux.org/gerrit/#/c/10463/ Change-Id: Ie484cc8017e7198cefa0d8e7476032c325a8348d Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11575 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Thomas Rini <trini@konsulko.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-20weston-ini-conf: Rework to use fragments to construct weston.iniTom Rini2-5/+7
Switch to constructing the weston.ini from fragments of files instead of variables and variable flags. This allows for much easier tracking of signatures by leveraging existing mechanisms. Update the Readme to explain how to do the various operations with fragments as well. Note that for QEMU we do not need to pass -show-cursor as it's already provided and we do want to change the VGA driver to one that reliably provides DRM support. For the HDMI connected screens, rather than name them by vendor name them first for connection and then required transformation for correct orientation. For board-specific options, move them to the board directories. When we need to change existing cfg options, rather than replace them the proper location to do this in is the do_configure function. Bug-AGL: SPEC-964 Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-10-12weston-ini-conf: Make this track variables correctly for signaturesTom Rini1-0/+2
bitbake does not know to track values that are found and used via getVarFlags() without them being otherwise refernced and tracked in ways that are otherwise caught. Further given that we use multiple levels of varflags here we need to be explicit in their tracking. Add all variables that we use to varflags where they are added to the metadata. Bug-AGL: SPEC-939 Change-Id: I32cf16c4354d733e086c6ea9a845934beff94715 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11255 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-09-18Add uvc.cfg for usb video class kernel configurezheng_wenlong1-0/+3
Add uvc.cfg into meta-agl-bsp/recipes-kernel, Then include this cfg in each board bbappend. See: https://gerrit.automotivelinux.org/gerrit/#/c/10803/ Change-Id: I5faebefef3560a27496103e1ad4a1ca70377a1ba Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10893 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-09-08Upgrade to pyroChanghyeok Bae16-2475/+1
u-boot: v2017.01 dlt-daemon: Remove gzipnative inheritance - gzipnative.bbclass is removed in pyro branch. - See ab0f46400c113c0d893be872727a67739d5e794d in poky. gpm: Remove bbappend file - upstream(meta-openembedded) is using git(v1.99.7) and this is not required anymore. gnutls: Remove bbappend file - The patch is already applied in upstream. agl-image-minimal: Remove ROOTFS_PKGMANAGE_BOOTSTRAP - ROOTFS_PKGMANAGE_BOOTSTRAP is removed in upstream. - Please see 529244ee212fe14019e35a5f163fab705ddbf141 in poky. freetype: Change hash value for v2.7.1 binary shadow: Remove shadow_%.bbappend - It's already applied upstream poky. Remove nativesdk-packagegroup-sdk-host.bbappend - It's already applied in upstream poky. faac: Remove bbappend file - It's already applied meta-openembedded upstream. pulseaudio: Change bbappend naming - Upstream yocto provides pulseaudio v10.0. weston: re-create patch to apply new version (v2.0.0) - Remove 0001-compositor-drm.c-Launch-without-input-devices.patch because it's already applied in new version. mesa: Remove 12.0.3 recipe and fix build error for qemux86-64 - Yocto upstream supports 17.0.2 and v12.0.3 is not required anymore in raspberrypi - Error: | configure: error: --enable-gallium-llvm selected but llvm-config is not found wayland-ivi-extension: Upgrade to latest master version - Due to weston upgrade, wayland-ivi-extension should be upgraded. packagegroup-ivi-common-core-multimedia: Remove alsa-lib - alsa-lib has empty package and it's not required anymore. Add agl-driver and agl-passenger in group and passwd - Parsing Error: agl-users: groupname agl-passenger does not have a static ID defined. poky-agl.conf: Change gstreamer default version to v1.10.x - Yocto upstream moves gstreamer to v1.10.4. af-main: Fix build error - Error: file /usr/local conflicts between attempted installs of af-main-1.0-r0.corei7_64 and base-files-3.0.14-r89.qemux86_64 intel-corei7-64: Change gstreamer-vaapi-1.0 name - gstreamer-vaapi-1.0 is moved to oe-core and its name is changed to gstreamer1.0-vaapi. linux-raspberrypi: Drop 4.4 bbappend - The upstream meta-raspberrypi doesn't support v4.4 anymore. - CVE patches are not required anymore. glibc: Remove bbappend - The bug-20116 is already applied in 2.25 cynara,security-manager: Fix build error - cynara: Replace bb.data to d - security-manager: Temporarily use 'no' in APPLY variable u-boot-ota: Add SRC_URI - In pyro, SRC_URI and S is moved from .inc to .bb linux-yocto: Remove 4.8 and 4.4 bbappend - Yocto 2.3 (Pyro) doesn't support v4.8 kernel anymore. - CVE patches in meta-agl-bsp are already applied in Yocto 2.3. tcf-agent: Remove bbappend file - This change is merged to upstream poky (pyro) bluez5: Remove recipe and add .bbappend - Yocto 2.3 (Pyro) already has same version. - bluetooth.conf file is added in .bbappend python-pycrypto: Remove recipe - meta-openembedded (Pyro) already has same version. meta-agl-bsp/classes/image.bbclass: Arrange for pyro - image.bbclass is taken from poky/meta/classes/image.bbclass and only changed IMAGE_TYPE_vm variable. libsoup: Fix native build error temporarily v2 (jsmoeller): meta-agl-bsp/meta-ti: - workaround patches in meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend - fix old python code in meta-ti/recipes-arago/ipumm-fw/ipumm-fw_3.00.13.00.bb - workaround patches in meta-ti/recipes-arago/weston/weston_%.bbappend - make specific to dra7xx-evm: -- meta-ti/recipes-bsp/alsa-state/alsa-state.bbappend -- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend -- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio/dra7xx-evm-set-default-sink-source.patch -- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend TODO/FIXME's in: - meta-agl-bsp/meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend - meta-agl-bsp/meta-ti/recipes-arago/weston/weston_%.bbappend - meta-agl-bsp/meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend - meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend Bug-AGL: SPEC-646 Change-Id: I4162ae887d3334e9102575e3724483aa25f4bd9c Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10457
2017-06-29Fix CVE-2017-1000364 by backporting the patches for rpi3Jan-Simon Möller9-0/+2053
Backport of patches from upstream for 4.4 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=4b359430674caa2c98d0049a6941f157d2a33741 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=f41512c6acb71c63cf4e3bd50934365ae2a23891 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=v4.4.74&id=1f2284fac2180d7a9442c796d9755e3ce7ab0bd9 Backport of patches from upstream for 4.9 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=cfc0eb403816c5c4f9667d959de5e22789b5421e - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=5d10ad6297260e9b85e7645ee544a6115bb229e4 - https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?h=linux-4.9.y&id=ce7fe8595902c3f03ef528c2dc1928b3f4b67fcf Bug-AGL: SPEC-705 Change-Id: If330fb7de09ab00f84d35a1e4c5343f958fcbf56 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9857 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Leon Anavi <leon.anavi@konsulko.com>
2017-06-28Add CAN drivers by default to AGL boardsRomain Forlot1-6/+39
v2 (jsmoeller): Add append files for boards that need special handling. Change-Id: I172b71be6e825aa6399f22899e9b6eaacc86e72b Signed-off-by: Romain Forlot <romain.forlot@iot.bzh> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9791 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2017-04-26meta-agl-bsp/meta-raspberrypi: Upgrade to v12.0.3Changhyeok Bae6-9/+267
Yocto morty has mesa 12.0.1 but it has a bug for vc4 driver. The bug is fixed in v12.0.2 and yocto upstream provides v12.0.3. This commit is taking from https://github.com/GENIVI/meta-genivi-dev/commit/e9c013951feb5c78519da04513ab79baf400264e. Bug-AGL: SPEC-445 Change-Id: Idfd0878f3549c20eac77ae680a65347ec851bd94 Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9253 Reviewed-by: Changhyeok Bae <changhyeok.bae@lge.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-04-24Switch to meta-updaterAnton Gerasimov4-0/+49
Replace SOTA-related sections with includes, moved u-boot-ota common to minnowboard and qemu to meta-agl-bsp Change-Id: I0629a63154ff90bd712f621297b886505a2f462c Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9189 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>