aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-raspberrypi
AgeCommit message (Collapse)AuthorFilesLines
2017-04-24Switch to meta-updaterAnton Gerasimov4-0/+49
Replace SOTA-related sections with includes, moved u-boot-ota common to minnowboard and qemu to meta-agl-bsp Change-Id: I0629a63154ff90bd712f621297b886505a2f462c Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9189 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2017-04-19Use weston-init to startup westonRonan Le Martret2-21/+0
* weston.service should not be a part of weston recipes * remove weston.service from AGL weston recipes * yocto upstream uses the recipe weston-init to startup weston * customize weston-start with sed - remove openvt - add option to weston-launch * customize weston.service with sed - add option for weston * unified the weston startup beteween AGL BSPs * remove fix on the AGL BSP Bug-AGL: SPEC-452 Bug-AGL: SPEC-310 Change-Id: I12722826abdc004214d289961e900c36528ec6e3 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2017-03-30Generate weston.ini dynamicallyRonan Le Martret3-25/+4
* remove weston-intel.ini * add new package weston-ini-conf * the list of the sections of weston.ini is described in variable flags WESTONSECTION * each section is described in variable flags WESTONSECTION * each output screen is described in agl_screen variable Bug-AGL: SPEC-477 Change-Id: I3d25ab49018e3842c916993ba8b9bcc2428d5170 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2017-03-23Removed wl-shell-emulator from AGLRonan Le Martret1-1/+1
Since CES2017, AGL doesn't use 'layer-add-surfaces' command. wl-shell-emultor.so is only required by 'layer-add-surfaces'. So we can remove wl-shell-emultor from AGL. Bug-AGL: SPEC-341 Change-Id: I0cad29ff1534e8d3fd4b94f8a13490b9fa19918e Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2017-02-14raspberrypi-linux: add smack patchset to 4.9 bbappendMatt Ranostay3-75/+78
Breakout smack patchset files definitions into both 4.4 and 4.9 bbappends since the later only needs one of the patches. Issue: SPEC-443 Change-Id: I04afcaf55da2f9aa735e6798ba60a00ba0838726 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2017-01-26Jump kernel of rasb3 from V4.4.16 to V4.4.43Ronan1-4/+0
* Fix build for AGL Change-Id: I2f799daab05dd295397d2ae05b7e9ab1d707128c Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2017-01-06Apply bluetooth/smack patches also to rpi kernelJan-Simon Möller5-0/+208
This changeset patches the rpi with the needed changes to allow bluetooth to work together with smack. The patches were developed for porter and are a backport of patches submitted for 4.10+ . Bug-AGL: SPEC-293 Change-Id: I96d04a709de6ad7843840d9ae154f041173948a2 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2017-01-02Add entry for official pi touchscreen over DSI portJan-Simon Möller1-0/+6
This change add support for the official touchscreen that is connected throught the DSI-1 port to the board. Change-Id: If85490ca69310922b8bf314681d1d8459995c61e Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-12-29rpi-config: add configurable CMA low and high water marksMatt Ranostay1-0/+8
For dynamically allocating of CMA blocks the low and high water marks settings determine when the GPU requests or releases memory from the CPU. Change-Id: Iad494c101fec0884bb687c5ea51c9657b7c17bd9 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2016-12-29linux-raspberrypi: add ENABLE_CMA options to kernel command lineMatt Ranostay1-0/+3
Add ENABLE_CMA setting that enables required kernel configuration to allow the dynamic CMA to function. Change-Id: I0b0ab0fd7fd64454ea3cc9a89344a98897838e11 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2016-12-28meta-raspberrypi: disable debug loggingScott Murray1-1/+1
Set CMDLINE_DEBUG in linux-raspberrypi_4.4.bbappend to disable the debug logging by the kernel and systemd that was spamming the console. As a side benefit, this noticeably speeds up booting. Change-Id: Ic99b1626ea20a27d3d157bcb952ec30cd50baeb2 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2016-12-15weston-raspberrypi.ini: Add commented out mode for GeChic 1502iScott Murray1-0/+2
Add the commented out mode line for using the GeChic 1502i in 1080p so that it's easy to enable it for the CES demo setup. Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Idcdf25188d3391403ee29c5bda7568c652b4c730
2016-11-28weston-raspberrypi.ini: Fix Weston configurationsLeon Anavi1-1/+6
Fix Weston configurations for Raspberry Pi 2/3 and run it in IVI shell. Following these changes start_ALS2016_ivi-shell.sh works again. Bug-AGL: SPEC-268 Change-Id: Ief75dfc078a42aba65161783b2a7beef23115e33 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-11-25Use IVI-shell instead of desktop-shell as default in weston.iniBocklage, Jens1-5/+3
Using IVI-shell as default for following platforms: - QEMU - Renesas - Raspberry Pi The IVI-shell is needed to run the CES 2017 demo. Signed-off-by: Bocklage, Jens <Jens_Bocklage@mentor.com>
2016-11-17weston.sh: Set XDG_RUNTIME_DIR to /run/user/0Leon Anavi1-1/+1
Set XDG_RUNTIME_DIR for Raspberry Pi in weston.sh to /run/user/0. Bug-AGL: SPEC-310 Change-Id: I283ee98ae17a54aa3e6a4c8574ab9debe1b21fbb Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-11-16Add support for CES 2017 demo hardwareScott Murray1-0/+10
Add kernel config fragments to enable support for the TP-Link TL-W722N USB Wifi adapter on both Turbot and Porter, and RTL2832U DVB USB adapter on Porter. v2 (jsmoeller): Adapt linux-yocto bits and add rpi3 + vayu - moving linux-yocto appends catches all the linux-yocto boards - adding the fragments to the other boards likewise - yet todo: sabre, wandboard v3 (jsmoeller): remove leftover file:// Change-Id: Ic2c3255d9383ccfe8b24d034ef43779d120c5ee1 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-02Bugfix: conditional append instead of appending to overrideAnton Gerasimov1-1/+1
Change-Id: I337876d9d5311618efd3e5a627724801de0acd6c Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-10-31Move RPi specific bbappends to meta-agl-bspAnton Gerasimov2-0/+5
Bug-AGL: SPEC-254 Change-Id: I1904b7e9ec09d5e9f5acc7a3d4671da9e2dccbb3 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-10-31Use kernel_configure_variable in append for rpiJan-Simon Möller2-43/+46
This changeset simplifies the configuration of the rpi kernel by using kernel_configure_variable in do_configure_append. Due to an upstream bug, we need to repeat the final configuration call. We also enable BLK_DEV_RAM, BLK_DEV_NBD and SMACK. For this we also define an OVERRIDE for netboot. v2: add conditional appends for netboot, sota, smack by using overrides. Change-Id: I2a4a8fae6989246d715fc2fc71bb4c251f423bdb Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-09-27mesa_%.bbappend: Remove dependency from libomxilLeon Anavi1-1/+1
Remove proprietary components such as libomxil which require setting LICENSE_FLAGS_WHITELIST = "commercial". Bug-AGL: SPEC-254 Change-Id: I93afadcaf70de8c0af23466efa7a4e3ef45d20b6 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-09-26weston: Set XDG_RUNTIME_DIR for Raspberry PiLeon Anavi2-0/+12
Set environment variable XDG_RUNTIME_DIR and fix Weston on Raspberry Pi 2/3 through script /etc/profile.d/weston.sh. Change-Id: Ie561623641f287e1ec911a5813c2cff225af4977 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-09-25weston: Use drm-backend.so for Raspberry PiLeon Anavi2-0/+23
Replace weston.ini configration for Raspberry Pi and use drm-backend.so as a backend for Weston. Change-Id: I8acedd63fc0a124e4f369609270094c76b7e7f88 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-09-25meta-raspberrypi: AGL support for Raspberry PiLeon Anavi5-0/+113
Yocto/OE layer that extends the recipes for mesa and the supported Linux kernel for Raspberry Pi for successful build of AGL with Wayland, Weston and Qt. It is based on the existing ports of Tizen and GENIVI Development Platform for Raspberry Pi. Change-Id: Icfed9e888c2abaf26c14ab402d0a90215862afbd Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>