aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-rcar-gen3-adas/conf
AgeCommit message (Collapse)AuthorFilesLines
2020-07-21[RCAR] Modify generated image and sdk pathRonan Le Martret1-0/+2
For the kingfisher we want a specific file name, for generated image and sdk. It will be useful to avoid any confusion between image/sdk of the ulcb board and the ulcb board with kingfisher support. IMAGE_LINK_NAME is used to create link to files using IMAGE_NAME variable. TOOLCHAIN_OUTPUTNAME is used to create the sdk files. We can't overwrite SDK_NAME var, because this var is set in poky/meta-poky/conf/distro/poky.conf (higher priority then us). Bug-AGL: SPEC-3443 Change-Id: I541171d37d65091b617b8525675958b3800bf5c8 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25031 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-14[RCAR] Change default of the kf build imageRonan Le Martret1-0/+2
To avoid confusion between image builded with or without kingfisher support we need to, at least, change the name of the builded image. Bug-AGL: SPEC-3443 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I35e4f0a5f856543ecaba6e30b62b11f4a149ea9f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24974 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-07Use the correct BBFILE_PATTERN for meta-rcar-gen3-adasJan-Simon Möller1-1/+1
We have multiple entries to cover, fix the BBFILE_PATTERN . Bug-AGL: SPEC-3443 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: I2fe95bf183fafa776668a63f9e28775a6f0547e0 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24916 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-07-07Readd the radio packages in the local.conf includeJan-Simon Möller1-0/+9
We need to see if we leave it as generic IMAGE_INSTALL_append here or do it elsewhere. For now this is a straightforward migration and helps clean-up the layer.conf . Bug-AGL: SPEC-3443 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: If7a482dc411ba7fc4d172f8fdf8493b81475ea93 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24915 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-07-07Use upstream meta-renesas from github and update meta-rcar-gen3-adas integrationJan-Simon Moeller2-62/+79
Thanks to the work done by Renesas and members of our community, we can now directly use meta-renesas from upstream github. A shout-out to everyone involved (Kurokawa-san, Ronan, Stephane). It turned-out it is simpler to create a symlink-based slim version of meta-rcar-gen3-adas layer instead of BBMASK'ing what should not be in there. See the comments in meta-agl-bsp/meta-rcar-gen3-adas/conf/NOTES as to why. Remaining work is to include the packages outside of the layer.conf in a follow-up. Bug-AGL: SPEC-3380 Change-Id: I2be1b44049d74146546380e2eb866f0558a26822 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24796 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-06-25Mask the recipe in meta-rcar-gen3-adas incompatible with YP 3.1.1Jan-Simon Möller1-0/+2
There is a bbappend in the cogent layer which is not forward-compatible with YP 'dunfell' 3.1.1 . BBMASK it until upstream did fix it. Bug-AGL: SPEC-3445 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Ib301bb14e53a37f445c74461982fbbc24bcdae2f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24861 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-04-27Declare layer compatibility for dunfellScott Murray1-1/+1
For the upgrade to YP dunfell/3.1 we need to update the layer compatibility. Bug-AGL: SPEC-3302 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ieb1ac9ef1f48f077c9cd312c4ac295ae1cc062b0
2020-01-22Declare layer compatibility with zeusJan-Simon Möller1-1/+1
For the uprev to YP 3.0 zeus we need to update the layer compatibility. Change-Id: Ib762915305588c39400c3c8343152b4ecbfa4556 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-09-09meta-agl-bsp: meta-rcar-gen3-adas: Rework KF radio initializationScott Murray1-0/+1
Add a systemd service unit and recipe to install it and a udev rules file so that the Kingfisher Si4689 radio will be initialized on boot if present, and the I2C device to access it will be accessible to applications with the "audio" permission. Note that an accompanying change to agl-service-radio is required to remove its now unworkable usage of the si_init script, which is replaced by this change. Bug-AGL: SPEC-2716 Change-Id: I81cf4b8c439598bdac1eb7910a0d693825141d7b Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2019-08-01meta-rcar-gen3-adas: improve BBFILE descriptionHarunobu Kurokawa1-1/+1
To avoid the followings warning. WARNING: No bb files matched BBFILE_PATTERN_rcar-gen3-cogent Bug-AGL: SPEC-2708 Change-Id: I4bebc3203f947834b9264b4f79b0856c908af493 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-06-10Changes to support the repo clone reworkJan-Simon Möller1-2/+2
To be merged together with: https://gerrit.automotivelinux.org/gerrit/#/c/AGL/AGL-repo/+/21389/ v2: fix the aglsetup script v3: fix scripts to extract m3ulcb v4: use single folder for BSPs Bug-AGL: SPEC-2450 Change-Id: I3227896c68ec1413f55cf67ad8f15a7adfe87a52 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-04Upgrade to thudScott Murray1-1/+2
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-10-31gpsd-kingfisher-conf: fix PREFERRED_RPROVIDER issueStephane Desneux1-1/+1
virtual/gpsd-conf is a runtime dependency in packagegroup-agl-core-navigation. So, PREFERRED_RPROVIDER must be used in place of PREFERRED_PROVIDER Bug-AGL: SPEC-1861 Change-Id: I15b915c2e7a1410000f7527b13f3206242778bc0 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-06-28[GEN3 KF] Configure GPS deviceRonan Le Martret1-0/+5
* For the Renesas Gen3 extention board Kingfisher, we must specify the GPS device for gpsd service. * Create a new machine type kingfisher. Bug-AGL: SPEC-1538 Change-Id: If6b7e49f6a006218e57c58e15855e0d65eb849cd Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-04-10[Rcar] Remove valgrind recipes from meta-rcarRonan Le Martret1-0/+1
* valgrind was backport in meta-rcar from cogent (unidentified reason). In some builds environement, the build of this recipes failed (issue hardly reproductible). So remove valgrind backported recipes should resolve the build issue and upstream recipes from yocto will be used. Bug-AGL: SPEC-1374 Change-Id: I1bc3d065badd1e2cd35b2a7b1a3c5fb43c357c06 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-03-20remove unused opencv folderHarunobu Kurokawa1-0/+1
Change-Id: I115096811662403f34846f434fbc7772024c1634 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-03-20Preserve HDMI naming for kingficher boardRonan Le Martret1-0/+2
Change-Id: Id1b6b88e606d0a102eefbdb9c8deae2dfe0cf73b Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-03-20Add kingficher supportRonan Le Martret1-0/+67
Change-Id: I75b9ced887249380a6164296b73acaaca91e3060 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>