summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/meta-rcar-gen3-adas/recipes-kernel/linux/linux-renesas_%.bbappend
AgeCommit message (Collapse)AuthorFilesLines
2020-12-17[RCAR] disable a default config in kernelronan1-0/+4
The meta-rcar layer activates by default the configuration MTD_RENESAS_RPC_HYPERFLASH in kernel. MTD_RENESAS_RPC_HYPERFLASH is not upstream, it's a meta-rcar specific feature. MTD_RENESAS_RPC_HYPERFLASH feature in the kernel need an firmware update on the board and can be considered (IMHO) as a security issues in production. We need to set DISABLE_RPC_ACCESS to deactivate it. v2 (jsmoeller): Use ?= for DISABLE_RPC_ACCESS . Bug-AGL: SPEC-3674 Signed-off-by: ronan <ronan.lemartret@iot.bzh> Change-Id: Iefaf9ca115d1fb805b0d3766fc0c800b74daecee Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25815 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-08-24[RCAR] Remove perf fix on renesas boardronan1-3/+0
* In RCAR BSP 4.14 the perf fix is upstream, we don't need to keep this fix in AGL. Bug-AGL: SPEC-3516 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: Ic014347319318122f99eabf48170a5b393ab46c5 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25069 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-07-14meta-rcar-gen3-adas: Restore local linux-renesas changes for KFScott Murray1-0/+5
The local patch to fix the KingFisher HDMI connector ordering and a configuration fragment to disable its onboard MOST support were accidentally dropped in the previous change for the perf BFD patch issue. Add them back to restore previous behavior. Bug-AGL: SPEC-3443 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I527d073901bad4860475df81da36bbf60d8c5be5 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25011 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-07-07Apply the perf fix only when meta-rcar-gen3-adas is not presentJan-Simon Möller1-0/+24
Currently the upstream rcar bsp does need the fix for building perf. The meta-rcar-gen3-adas layer contains a fix in the big patchqueue. Thus conditionally apply the perf build fix. Bug-AGL: SPEC-3443 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: Icbf53add71ed731c35dec149841691c82ae4372c Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24914 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-07-07Use upstream meta-renesas from github and update meta-rcar-gen3-adas integrationJan-Simon Moeller1-31/+0
Thanks to the work done by Renesas and members of our community, we can now directly use meta-renesas from upstream github. A shout-out to everyone involved (Kurokawa-san, Ronan, Stephane). It turned-out it is simpler to create a symlink-based slim version of meta-rcar-gen3-adas layer instead of BBMASK'ing what should not be in there. See the comments in meta-agl-bsp/meta-rcar-gen3-adas/conf/NOTES as to why. Remaining work is to include the packages outside of the layer.conf in a follow-up. Bug-AGL: SPEC-3380 Change-Id: I2be1b44049d74146546380e2eb866f0558a26822 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/24796 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-01-30[RCAR] Split ADSP path for ulcb and ulcb-kfRonan Le Martret1-0/+1
- If we want to build AGL for ulcb board without the meta-rcar (kingficher board support), we need to split the patch. Change-Id: I145887d4619a7132e46f98f30e1fc0dd3de6b29a Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2019-06-06[RCAR] Remove unnecessary device tree fileHarunobu Kurokawa1-0/+20
Bug-AGL: SPEC-2486 Change-Id: Ic0cf9128d1630ede1af8024e3bd5258b7529b683 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-11-15[RCAR][upstream] remove dts patch for SDIO frequencyHarunobu Kurokawa1-0/+4
Bug-AGL: SPEC-1945 Latest meta-rcar update SDIO frequency for TI's WLAN driver. However, in M3 case, the this patch raise ti/wlcore driver WANING. [ 107.009706] ------------[ cut here ]------------ [ 107.014342] WARNING: CPU: 0 PID: 4224 at /kernel-source//drivers/net/wireless/ti/wlcore/sdio.c:145 wl12xx_sdio_raw_write+0xb0/0x160 [wlcore_sdio] [ 107.027375] Modules linked in: rfcomm 8021q garp stp mrp llc can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce btwilink bluetooth ecdh_generic wlcore_sdio rcar_can st_drv rfkill can_dev vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) sllin(O) pvrsrvkm(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6 [ 107.062537] CPU: 0 PID: 4224 Comm: wpa_supplicant Tainted: G O 4.14.35-yocto-standard #1 [ 107.071749] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT) [ 107.079138] task: ffff8005fc610e00 task.stack: ffff000020bc8000 [ 107.085054] PC is at wl12xx_sdio_raw_write+0xb0/0x160 [wlcore_sdio] [ 107.091316] LR is at wl12xx_sdio_raw_write+0x7c/0x160 [wlcore_sdio] <snip> [ 107.467808] ---[ end trace 0140d637a5afd50b ]--- [ 107.472613] wl1271_sdio mmc2:0001:2: sdio write failed (-84) [ 107.478340] ------------[ cut here ]------------ [ 107.483008] WARNING: CPU: 0 PID: 4224 at /kernel-source//drivers/net/wireless/ti/wlcore/main.c:796 wl12xx_queue_recovery_work.part.26+0x58/0x60 [wlcore] [ 107.496648] Modules linked in: rfcomm 8021q garp stp mrp llc can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce btwilink bluetooth ecdh_generic wlcore_sdio rcar_can st_drv rfkill can_dev vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) sllin(O) pvrsrvkm(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6 [ 107.531806] CPU: 0 PID: 4224 Comm: wpa_supplicant Tainted: G W O 4.14.35-yocto-standard #1 [ 107.541018] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT) [ 107.548406] task: ffff8005fc610e00 task.stack: ffff000020bc8000 [ 107.554363] PC is at wl12xx_queue_recovery_work.part.26+0x58/0x60 [wlcore] [ 107.561265] LR is at wl12xx_queue_recovery_work+0x1c/0x28 [wlcore] Change-Id: I6f15251e6997f52892efd118e8941af5930c5ca9 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-03-20[AGL] ulcb: Disable build-in most driverHarunobu Kurokawa1-1/+2
Kingfisher has MedlaLB Interface for most, kernel tree has most driver as build-in driver. So these configs is enabled. Howemver AGL use most driver in gerrit repository. So AGL should be disable it. Change-Id: Ia46500d58fc16f348a098c58f5e807cf37913e5e Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-03-20Preserve HDMI naming for kingficher boardRonan Le Martret1-0/+5
Change-Id: Id1b6b88e606d0a102eefbdb9c8deae2dfe0cf73b Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>