Age | Commit message (Collapse) | Author | Files | Lines |
|
Because the device tree has been renamed,
we must rename it accordingly.
Bug-AGL: SPEC-3097
Change-Id: Ic9ceee7df53880fa24f172c7c3a2ab76500e5a99
Signed-off-by: Minori Yasumura <minori@witz-inc.co.jp>
|
|
- update new rcar driver (Linux_Drivers-weston7 20191021).
Bug-AGL: SPEC-2932
Change-Id: I231301ac5096715e52f2fbb2e35c159a323f8b71
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Change-Id: I052e4d0a27c1e0f6e6ab74c518d67dbf72e39b15
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
- If we want to build AGL for ulcb board without
the meta-rcar (kingficher board support), we need to
split the patch.
Change-Id: I145887d4619a7132e46f98f30e1fc0dd3de6b29a
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
v2:
add PACKAGE_ARCH = "${MACHINE_ARCH}"
Bug-AGL: SPEC-2808
Change-Id: Id1587761c9be10a55ea18a938b74b39c512b63e2
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
When the ZIP files are already copied, it avoids to
reinstall the proprietary drivers.
This change is intended to facilitate workflows were
aglsetup is sparsely/rarely used.
Change-Id: I25275473d52ee7c811fdcaa50871bc1d385e868d
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
Update graphics kernel side driver to 20191021.
Bug-AGL: SPEC-2784
Change-Id: Ibce4e7ee5fe00d9c37e49b826bd62e39129f91a1
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Bug-AGL: SPEC-2784
Change-Id: I55e014a08fd315d3460672240c6ace1a2f31c55d
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
pipewire is used default audio card volume. Current 50% of DVC Out
is laudy and 0% of DVC In is small.
Update 20% of DVC Out and 10% of DVC In for R-Car.
Bug-AGL: SPEC-2808
Change-Id: Iac572255977d6a0111026a6426081efb0edbf0aa
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
Bug-AGL: SPEC-2680
Change-Id: Ie397c943762c20b0231ca7c0e44323bdf6101790
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
This reverts commit 9bc6c25f56f4997e55b60e969e9f942cc1859988.
Bug-AGL: SPEC-2680
Change-Id: Ice72ff5f510ac848679c7d09ed4d0bde2d0940d7
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
The patch are only used for the m3ulcb machine.
Bug-AGL: SPEC-2564
Change-Id: Idfca2b7a48b7a53efee6dcf2f21b0f8932d7b43d
Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
|
|
* Add ebisu dependency within renesas bootfiles
* Delete rcar ADAS layers support
* Add weston video output config
* Add missing modules and gst plugin
Bug-AGL: SPEC-2564
Change-Id: I61a44f831d0bc55210847eade2a1eacc7599fa74
Signed-off-by: Pierre Marzin <pierre.marzin@iot.bzh>
|
|
The agl-service-radio relies on gstreamer. Unfortunately the gstreamer recipe is currently
setup to also pull-in wayland (due to a compile-flag if wayland is in DISTRO_FEATURES).
To keep the distro aligned, we don't want to change the DISTRO_FEATURES between the profiles, thus we
move the agl-service radio to the graphical profile where we include weston anyway by default.
For now this means there is no radio service (or mediaplayer service) w/o wayland installed as well.
In case we get this requirement, we'll have to work on the gstreamer recipe and its split.
v2: fix bbapend in meta-agl-bsp/meta-rcar-gen3
v3: put packagegroup-agl-graphical-multimedia.bbappend in graphical profile (not the best place IMHO)
This fixes the non-graphical build.
Bug-AGL: SPEC-2500
Change-Id: I5ebec7d7713510f3fcd50ae425d7f8cbb6328016
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The script setup_mm_packages.sh setups a temp dir to extract proprietary
drivers for Renesas BSP, but it's not re-entrant: the temp dir is not cleaned
after execution.
With the introduction of the change 9bc6c25 (hotfix for GFX issues), more cleanup
is needed to avoid duplicate zips detection in the copy script located in
meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh
This change makes some initial cleanup in the workdir (in case of transition
from a previous script without this patch) and also removes the workdir at the end
Bug-AGL: SPEC-2253, SPEC-2480
Change-Id: Ia95f9045d8a695d550a061710a17676088a92c0a
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
To be merged together with:
https://gerrit.automotivelinux.org/gerrit/#/c/AGL/AGL-repo/+/21389/
v2: fix the aglsetup script
v3: fix scripts to extract m3ulcb
v4: use single folder for BSPs
Bug-AGL: SPEC-2450
Change-Id: I3227896c68ec1413f55cf67ad8f15a7adfe87a52
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Renesas BSP 3.19 is not actually available. But the graphics binaries are.
So this patch get the 3.19 GFX binaries to patch the 3.15 GFX binaries ones.
To achieve that, the following zip is needed:
"R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-weston5-20190516.zip"
(Note: the name of the zip can change).
By this way, BSP 3.15 of Renesas will be used with the 3.19 GFX binaries.
This solves the graphic issue of the M3ULCB and H3ULCB boards.
This hotfix has been tested on m3ulcb with success.
Warning: This patch has to be revert when the BSP of Renesas will
be updated to 3.19 (at least).
Bug-AGL: SPEC-2253
Change-Id: Ieaab76fb08618f9994c3ff5969d9a361d08b65d2
Signed-off-by: Pierre MARZIN <pierre.marzin@iot.bzh>
|
|
These are required for BSP 3.15.0 on thud (with Wayland 1.16/Weston 5.0)
Bug-AGL: SPEC-1837
Change-Id: I11321915a1be9b858e0b9fef35820c211e0074b4
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Sometimes, libepoxy has an error during do_configure.
PREFERRED_PROVIDER_virtual/egl definition in agl_m3ulcb
was changed to virtual-gles-user-module from libegl.
To fix this missing dependency, add virtual/egl definition in
virtual-gles-user-module.
------
checking for egl... no
configure: error: Package requirements (egl) were not met:
No package 'egl' found
------
Change-Id: Ia6915af2a8babbbd3353513cc2c115387f6e178c
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
* For RCAR BSP v3.15.0, we need to fix this patch
Bug-AGL: SPEC-2185
Change-Id: Iadf40e6bfe964c3881d411cbdaab956ce524bc76
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
This patch is now upstream (RCAR BSP 3.15.0), so it useless to keep it
in AGL.
Bug-AGL: SPEC-2185
Change-Id: I10f1c99d4854c364960f310e4e12b385f6c55465
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
linuxptp is now on version 1.8 and compatible the current RCAR BSP (v3.15.0)
Bug-AGL: SPEC-2185
Change-Id: I10fa4e2339880ef786d0fef07ebf2864f1659187
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Current version of imagemagick is 7.0.7 and do not need backport.
Bug-AGL: SPEC-2185
Bug-AGL: SPEC-1687
Change-Id: Ie204c48e5907b4bb40418f9a0b10b0b1b35d5c77
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
python-wand is now useless
Bug-AGL: SPEC-2185
Bug-AGL: SPEC-1687
Change-Id: I97d0871185017e88fcac31dcef70c1d28fe636c1
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Bug-AGL: SPEC-2185
Change-Id: I30f0ae0b760b540d41af7a0e7afafc9984d34b20
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
- u-boot in RCAR BSP v1.15.0 has been updated to v2018.09
so we can remove some old fix.
Bug-AGL: SPEC-2185
Change-Id: I1d40f0341edfdd0cedc5b1d58911bdc30677eeea
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
The patch for CGROUP2 is important for running
without capabilities.
Bug-AGL: SPEC-2006
Bug-AGL: SPEC-1016
Change-Id: I0dfec85bdc66b220e20776501522e71579e6a742
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
Change-Id: I3c2d0df6e3afd4aa0671261f7d143ac15d88a836
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
|
|
The ADSP on Renesas SoCs required a reserved memory area to become
enabled, and this needs to be done manually.
This patch adds sound hardware abstraction information for the m3ulcb
and m3ulcb-kf (kingfisher) device trees. This is helpful on-board the
ADSP for dynamically determining sound hardware at runtime, allowing
single binaries to be used between the two boards.
Future work will incorporate the h3ulcb and Salvator boards into the
abstraction.
Bug-AGL: SPEC-1227
Bug-AGL: SPEC-1424
Bug-AGL: SPEC-1571
Change-Id: I78edc5854a95520276bdcd9fd9766a120d2c04d7
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Mark Farrugia <mark.farrugia@fiberdyne.com.au>
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
The upstream version of AGL boots Linux in EL1. This mode is not
privileged enough to put in place the correct configuration of
an hypervisor (e.g., KVM).
This patch leverages the ATF rcar platform configuration variables to
boot the Linux kernel in EL2, instead of EL1, allowing Linux-based
hypervisors such as KVM to configure all the necessary stubs to
properly run virtual machines.
This patch has been successfully tested with ATF, KVM and AGL rootfs
on the Renesas R-Car M3.
Changelog:
- Added arm-trusted-firmware patch, which makes this work easy
to be tested by the community
- This patch version does not contain Linux kernel modifications.
In fact, these resulted not necessary with the proposed ATF patch
and a recent kernel (higher than 4.6)
Bug-AGL: SPEC-497
Bug-AGL: SPEC-1571
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I8d20e36a09be1dba35b10193643ea00e4f388e95
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Bug-AGL: SPEC-1571
Change-Id: Ieefd423b79faa220531a887ff167227044ab6064
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
At www.imagemagick.org/download, tarball archives of old patchsets are deleted
when a new patchset is created. This causes error when do_fetch().
Offical source repository is in github, so SRC_URI can be set to pull from there.
Unfortunately, github repository has tags only after 6.9.5-4.
Therefore, updated to the latest stable, 6.9.10-10.
For meta-agl/meta-agl-demo, ImageMagick is not mandatory component,
but optee inside Renesas BSP requires it (and python-wand).
Upstream optee already remove these dependency, so this is
just work-around until meta-renesas-rcar-gen3 will be updated.
Change-Id: I1767e2d7588a35d75009843312c484d3d63553ae
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Bug-AGL: SPEC-490
This reverts commit d88997d1d16897abb83a161c215cbec25d9b5e0f.
Change-Id: I7c7a989fb1bf1df1de3c0557792ea4b013fec709
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
New Link:
* https://www.renesas.com/us/en/solutions/automotive/rcar-download/rcar-demoboard-2.html
Change-Id: I4451bbb8ff151c0ab5af0163e667a170e2a078cb
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Though R-Car has V4l2 renderer but it is special case.
Then it makes no sence to add v4l2 configration into
weston.ini file for AGL.
Change-Id: Id91be4ce9bcca03126d01e50c587e8d945464f61
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
latest sound card name in R-Car Starter Kit is changed "ak4613"
from rsnddai0ak4613h, that is described in device tree.
Therefore, asound.state file should be updated.
Change-Id: I35dc0521da3061eedfa17ba2e28e68ab36353087
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
Backport pn533_usb incorect stack use from linux-next kernel
NOTE: this kernel is tracking LTS so at some point it will need to be reverted
Bug-AGL: SPEC-1544
Change-Id: I90fd3e0339dfdb148eb01b6ef836353bc2ac6a43
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Tested with agl-demo-platform image on:
* M3+KF
* H3+KF
Test results:
| Component | Status |
|---------------------------------------------------------|------------|
| Wifi (U52) | ok |
| BT HCI (U52) | ok |
| BT Audio(U52) | not tested |
| USB2.0(host)(CN13) | not tested |
| USB2.0(func)(CN13) | not tested |
| USB2.0(on-the-go)(CN13) | not tested |
| USB3.0(CN2) | fail |
| Multichan Audio(SSI3,4) hphone(CN 32,33) lineout(CN12) | not tested |
| CSI : Expansion Board (CN10) | not tested |
| CSI : Expansion Board (CN11) | not tested |
| CSI : Raspberry Pi camera(CN48) | not tested |
| Video Input CMOS camera(CN29) | not tested |
| HDMI out(CN49) | ok |
| LVDS out(CN7) | not tested |
| Radio (CN42, 43) | ok |
| Gyro, Accel | ok |
| GPS (CN16) | ok |
| Serial (CN4) | not tested |
| CAN(CN17, 18) | ok |
| SD (CN47) | fail |
| Mini PCIe(CN15) | not tested |
| M.2 key M (CN5) | not tested |
| MOST (CN22) | not tested |
Change-Id: I0779cd6440bf1e8fc958f127aee3c3979da603bb
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
This is the last larger commit in this series and deals with the graphical part.
We introduce the graphical profiles:
- meta-agl-profile-graphical
-- meta-agl-profile-graphical-html5
-- meta-agl-profile-graphical-qt5
Notable changes:
- weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images.
- new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds
- new image/sdk: agl-image-minimal-crosssdk
- agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical.
- The wayland-ivi-extension moved to the agl-demo-platform.
- The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now.
- added and massaged the agl-features.
- found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g)
Todo:
- we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages.
For further details, see meta-agl/docs/profiles.md.
v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES.
v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel)
v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane)
v5: fix missing packagegroup inclusion
v6: explicitely put profile-graphical-qt5 on-top of profile-graphical
v7: re-add 'procps' when agl-devel feature is on
Bug-AGL: SPEC-145
Change-Id: I24cdcd1118932758d0c55d333338238f2a770877
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-1359
Change-Id: Id3b2327f93f325bca81bb464c31c13b59eda366f
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
With rocko, we're on 4.14, so we should stop inheriting from
linux-agl-4.9.inc, which is applying a Smack patch that has already been
merged into 4.14.
Change-Id: I15e1dd270d111d44b089f9587fcdccf9abec2210
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
|
This bbappend attempts to remove a patch that doesn't exist, so on
rocko, it is now breaking the build. Remove it.
Change-Id: Ieddbe8c73c5efa2568ea09a83be73e151618be8e
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
|
Change-Id: I42cf2872946ad46852136dfc9170718434b4b5ba
Signed-off-by: ronan <ronan.lemartret@gmail.com>
|
|
This reverts commit 9b7584fd0ca807998643028a264b25c8dbbbed18.
Change-Id: I41337a1ee9425cfcfe19cf1406b3b4391f4af3be
|
|
Change-Id: I63e974a075752a9d2f7cba3a1880321c7c4c6b17
Signed-off-by: ronan <ronan.lemartret@gmail.com>
|
|
This reverts commit 9b9894c5497f9604282f5abc25de7dd48b99e7b8.
Change-Id: Iab95fb8feb2f50397d6a285bddffaafd37a62984
|
|
Change-Id: I5107a29d97909bbca5a135ef8faa52332dff84ae
Signed-off-by: ronan <ronan.lemartret@gmail.com>
|
|
Change-Id: I7418c88311b89ad96e29709429d9558519e3c7cc
Signed-off-by: ronan <ronan.lemartret@gmail.com>
|
|
Change-Id: I0ad8b780183feead322bd4dd5cceb25d4b2bad2d
Signed-off-by: ronan <ronan.lemartret@gmail.com>
|
|
Change-Id: I71ba7ac53db51f73209424a45e7c94cd1cc7c46e
Signed-off-by: ronan <ronan.lemartret@gmail.com>
|