| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The commit of the omap5-sgx-ddk-linux git repository used by the
ti-sgx-ddk-km recipe is changed by recent commits to meta-ti to
introduce generic support for armel (soft-float) targets. This conflicts
with the existing patch in meta-agl which adds support for our
toolchain.
The simplest fix is to pin to a working commit by setting SRCREV to the
previous commit on the same branch. This is the same commit that is
currently used and so it won't have any effect until the meta-ti layer
itself is updated.
For reference, the commit in question can be seen here:
https://git.ti.com/graphics/omap5-sgx-ddk-linux/commit/dbdbd9309a58ee723fc827ef5fd45c28347cf61f
Bug-AGL: SPEC-2490
Change-Id: I2924cdadd697680567a9378eb3242f8dd526a429
Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
The way that the PM firmware for these devices is built takes very
specific steps to only get the cross-compiler provided by OE and almost
nothing else. Unfortunately when we build with the security_flags.inc
file in our distro this changes some of the default behavior of the
compiler and in turn we need to make sure to disable this and go back to
the default behavior.
Change-Id: I1ab8e20f77d7ab6a3c786437e9a9422b24f0e159
Bug-AGL: SPEC-1341
Signed-off-by: Tom Rini <trini@konsulko.com>
|
|
u-boot: v2017.01
dlt-daemon: Remove gzipnative inheritance
- gzipnative.bbclass is removed in pyro branch.
- See ab0f46400c113c0d893be872727a67739d5e794d in poky.
gpm: Remove bbappend file
- upstream(meta-openembedded) is using git(v1.99.7) and this is not
required anymore.
gnutls: Remove bbappend file
- The patch is already applied in upstream.
agl-image-minimal: Remove ROOTFS_PKGMANAGE_BOOTSTRAP
- ROOTFS_PKGMANAGE_BOOTSTRAP is removed in upstream.
- Please see 529244ee212fe14019e35a5f163fab705ddbf141 in poky.
freetype: Change hash value for v2.7.1 binary
shadow: Remove shadow_%.bbappend
- It's already applied upstream poky.
Remove nativesdk-packagegroup-sdk-host.bbappend
- It's already applied in upstream poky.
faac: Remove bbappend file
- It's already applied meta-openembedded upstream.
pulseaudio: Change bbappend naming
- Upstream yocto provides pulseaudio v10.0.
weston: re-create patch to apply new version (v2.0.0)
- Remove 0001-compositor-drm.c-Launch-without-input-devices.patch
because it's already applied in new version.
mesa: Remove 12.0.3 recipe and fix build error for qemux86-64
- Yocto upstream supports 17.0.2 and v12.0.3 is not required anymore in
raspberrypi
- Error:
| configure: error: --enable-gallium-llvm selected but llvm-config is
not found
wayland-ivi-extension: Upgrade to latest master version
- Due to weston upgrade, wayland-ivi-extension should be upgraded.
packagegroup-ivi-common-core-multimedia: Remove alsa-lib
- alsa-lib has empty package and it's not required anymore.
Add agl-driver and agl-passenger in group and passwd
- Parsing Error:
agl-users: groupname agl-passenger does not have a static ID defined.
poky-agl.conf: Change gstreamer default version to v1.10.x
- Yocto upstream moves gstreamer to v1.10.4.
af-main: Fix build error
- Error:
file /usr/local conflicts between attempted installs of
af-main-1.0-r0.corei7_64 and base-files-3.0.14-r89.qemux86_64
intel-corei7-64: Change gstreamer-vaapi-1.0 name
- gstreamer-vaapi-1.0 is moved to oe-core and its name is changed to
gstreamer1.0-vaapi.
linux-raspberrypi: Drop 4.4 bbappend
- The upstream meta-raspberrypi doesn't support v4.4 anymore.
- CVE patches are not required anymore.
glibc: Remove bbappend
- The bug-20116 is already applied in 2.25
cynara,security-manager: Fix build error
- cynara: Replace bb.data to d
- security-manager: Temporarily use 'no' in APPLY variable
u-boot-ota: Add SRC_URI
- In pyro, SRC_URI and S is moved from .inc to .bb
linux-yocto: Remove 4.8 and 4.4 bbappend
- Yocto 2.3 (Pyro) doesn't support v4.8 kernel anymore.
- CVE patches in meta-agl-bsp are already applied in Yocto 2.3.
tcf-agent: Remove bbappend file
- This change is merged to upstream poky (pyro)
bluez5: Remove recipe and add .bbappend
- Yocto 2.3 (Pyro) already has same version.
- bluetooth.conf file is added in .bbappend
python-pycrypto: Remove recipe
- meta-openembedded (Pyro) already has same version.
meta-agl-bsp/classes/image.bbclass: Arrange for pyro
- image.bbclass is taken from poky/meta/classes/image.bbclass and only
changed IMAGE_TYPE_vm variable.
libsoup: Fix native build error temporarily
v2 (jsmoeller):
meta-agl-bsp/meta-ti:
- workaround patches in meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
- fix old python code in meta-ti/recipes-arago/ipumm-fw/ipumm-fw_3.00.13.00.bb
- workaround patches in meta-ti/recipes-arago/weston/weston_%.bbappend
- make specific to dra7xx-evm:
-- meta-ti/recipes-bsp/alsa-state/alsa-state.bbappend
-- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend
-- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio/dra7xx-evm-set-default-sink-source.patch
-- rename meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
TODO/FIXME's in:
- meta-agl-bsp/meta-ti/recipes-arago/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
- meta-agl-bsp/meta-ti/recipes-arago/weston/weston_%.bbappend
- meta-agl-bsp/meta-ti/recipes-multimedia/pulseaudio/pulseaudio_%.bbappend
- meta-ti/recipes-bsp/u-boot/u-boot-ti-staging_%.bbappend
Bug-AGL: SPEC-646
Change-Id: I4162ae887d3334e9102575e3724483aa25f4bd9c
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10457
|
|
The ALSA controls for the onboard tlv320aic3106 codec do not come
up with usable default settings for the dra7xx-evm analog audio
jacks. Add asound.state defaults for the dra7xx-evm baseboard
audio that properly configure the Line DACL1/R1 and PGA MicL1/R1
switches and accordingly gain levels such that the Line-Out and
Microphone jacks are functional by default.
Bug-AGL: SPEC-803
Change-Id: I6fe80daf1073c4d7c39be610dc99c136b4b3a82b
Signed-off-by: Matt Porter <mporter@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10495
Reviewed-by: Thomas Rini <trini@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The patch has been integrated into u-boot git repo
Change-Id: I540db7bd3658300a3dffc218d228d43e7e87a2b8
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
Update with the new name
Change-Id: Icef7ed926821909691ff59a6253473ccbef4061d
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
Change-Id: Ia8d1df73bd3b8812a570a0059aeefc264472abf8
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
Change-Id: I88daa7df388c12eed2b53f3db2c8821814c2e88e
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
The latest dra7xx-evm purchased from ti.com comes with the OSD
display, this change will allow the AGL nightly images to work
on the latest dra7xx-evm by default.
If the user has an older EVM, then the uEnv.txt should be modified
to match the connected displays. The complete list of supported
LCDs can be found by checking the /boot folder of the the rootfs.
Change-Id: I7f7ac06a49670eb8b7446a6b27854bee4b76ace6
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
The latest u-boot has included some patches that
is causing an instability with certain MMC cards
This patch fixes the SRCREV to a known commit and
includes a stability fix for the MMC
Change-Id: I7ba99d36bd713d81409d528e8067e012415b33f0
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
dra7xx-evm supports multiple LCD panels, to boot the board
successfully, the uenv.txt has to specify the correct dtb
file. This patch adds the default dtb and specifies one of
the LCD panels in it.
NOTE:
It could happen that the panel that you have is a different
panel, in that case you would have to manually edit the same.
Change-Id: I0fdbe0ce48ca0654604a5808de684558308582c5
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
This u-boot version will enable specific usecases for
AGL and in general to support additional peripheral
boards
Change-Id: Id08dd74e299a2fc7a28df88c4417e94c06a19293
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
Change-Id: Ic6d76c389b6eadb2d31f91593a927baefb1cd819
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I826ce3d15d54098356ada353e155a21064560450
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
Paul Barker
Scott Murray
Tom Rini
Changhyeok Bae
Matt Porter
Karthik Ramanan
Jan-Simon Möller