| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* The libgbm recipe has disappeared. "virtual/libgbm" is now provided by
ti-sgx-ddk-um.
* Update ti-sgx-ddk-km and adapt the AGL toolchain support to fit with
the upstream Makefile changes.
Change-Id: I2744868b466306cf2c1cb458a6889ab2043f9421
Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
|
|
Disable building the EGLWLMockNavigation in wayland-ivi-extension to
avoid needing to patch it to build for the TI platforms. This fixes
the issue of meta-agl-bsp/meta-ti breaking non-graphics profile builds
like the telematics profile, and seems reasonable since there are no
known users inside AGL. Since it is no longer needed, also remove the
offending patch from meta-agl-bsp/meta-ti.
Bug-AGL: SPEC-2677
Change-Id: If87c3c238e880d01f99401ea4610616656f16185
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
The git history shows that the weston-ini-conf changes in
meta-agl-bsp/meta-ti were added to support the dra7xx-evm.
These changes should not be applied for other machines which use the
meta-ti layer such as the beaglebone and bbe.
Bug-AGL: SPEC-2409
Change-Id: Ia21425bfda3ec03ef51371c14fcbca94a5067a7c
Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Since the agl demo is now using wayland-ivi-extension
v2.0.2 everything related to v1.13.0 should be removed.
That means all bitbake recipes and also the used patch
files.
Change-Id: I326c8e13c6084ec2135d6f75d64db260d347491e
Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
|
|
The file was applied twice.
Change-Id: I018a7de662c67ecb1dd80311bf171346fb21ca9c
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
|
|
These changes are included:
- dra7xx-evm,meta-ti: disable gstreamer-plugins-bad on vayu until fixed
- meta-boundary: has no rocko branch, remove the folder
- meta-intel: generalize the libva bbappend
- general: remove the lua bbappend as it is upstream
- general: re-add fix for kernel-devsrc
(see https://gerrit.automotivelinux.org/gerrit/#/c/11209/)
Documents fixme's in meta-agl-bsp/ROCKO.FIXMEs.
Change-Id: I3df32632558d503c3ce343f907a1ee1e15ae7e26
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Upgrade wayland-ivi-extension version to 2.0.% from 1.13.
Currently, version is 2.0.2
This change is for only master branch.
[PatchSet2]
Apply the patch for type conversion for dra7xx board.
The patch for wayland-ivi-extension 1.13 is already applied but
for 2.0.2 is not applied yet.
Bug-AGL: SPEC-1244
Change-Id: I200c19837b8f7b646296a868c14423e55e98bf86
Signed-off-by: Kazumasa Mitsunari <knimitz@witz-inc.co.jp>
|
|
Backported M.Teyfel patch from wayland-devel mailing list:
https://lists.freedesktop.org/archives/wayland-devel/2017-November/035700.html
Upgrade wayland-ivi-extension to v2.0.2 but keep
using 1.1x for now with PREFERRED_VERSION until HMI could use the new
version.
Added Emre Ucan simple-id-agent to review.
Bug-AGL: SPEC-1096
Change-Id: I74c4ae0bf0bf822e27dcbb193dc9f7a13d3e270d
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11991
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Nobuhiko Tanibata <nobuhiko_tanibata@denso.co.jp>
Reviewed-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Switch to constructing the weston.ini from fragments of files instead of
variables and variable flags. This allows for much easier tracking of
signatures by leveraging existing mechanisms. Update the Readme to
explain how to do the various operations with fragments as well. Note
that for QEMU we do not need to pass -show-cursor as it's already
provided and we do want to change the VGA driver to one that reliably
provides DRM support.
For the HDMI connected screens, rather than name them by vendor name
them first for connection and then required transformation for correct
orientation.
For board-specific options, move them to the board directories.
When we need to change existing cfg options, rather than replace them
the proper location to do this in is the do_configure function.
Bug-AGL: SPEC-964
Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The rpm backend used in pyro changed behaviour and if multiple packages 'own' a directory
the installation will fail. Inject a flag to mitigate this and avoid the break.
Conflicting packages libgbm-dev and ti-sgx-ddk-um-dev on /usr/lib/pkgconfig .
Change-Id: I52439d94c230a9314a543e00edd247f29d10e113
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10927
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
dra7xx-evm currently does not initialize graphics correctly because
the PVR SGX services are not loaded at the correct time. Add a systemd
service which executes the script from the TI DDK before psplash and
weston are started. This fixes dra7xx-evm so that HomeScreen comes up
on boot.
Bug-AGL: SPEC-798
Change-Id: I0649902ac6066062527f345bea5e36e929d19c01
Signed-off-by: Matt Porter <mporter@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10487
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The change in commit 7d1d7457ff2b71abe95525b26148d5a3e7a42790
to dynamically generate weston.ini in the weston-ini-conf package
threw away the working weston.ini conf provided for dra7xx-evm.
This resulted in incorrect rotation of the image on the LCD since
dra7xx-evm builds were only picking up the default weston-ini-conf
.ini file contents for a generic HDMI display. Overriding the
output name with the correct drm rendering device name fixes this
and the image is displayed again in portrait mode.
Bug-AGL: SPEC-801
Change-Id: I52171dee27439667592481dac1ccd5284ed8206c
Signed-off-by: Matt Porter <mporter@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/10489
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Thomas Rini <trini@konsulko.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes are already part of meta-ti
Change-Id: I8d063b8ca5037dbc9b1e16bc60931692c570e0a4
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
Bug-AGL: SPEC-411
Change-Id: I5325d12ee46cd1e3a747d29fee5e3bc697eae316
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
This adds another INSANE_SKIP to avoid a new QA check from failing the build.
Change-Id: Ia46f531349c515e68889022edc40cf94ece19654
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
TI Jacinto 6 has a 3D GPU that can used to accelerate the graphics
processing requests. This patch replaces the default graphics
drivers and user space libraries only for the dra7xx-evm MACHINE
Change-Id: I1a53594f0fa4dc8fabd16f9ce2c765dd32b9e142
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
Paul Barker
Scott Murray
Michael Teyfel
Jan-Simon Möller
Kazumasa Mitsunari
Romain Forlot
Tom Rini
Matt Porter
Karthik Ramanan
Ronan Le Martret