summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp/recipes-graphics/wayland/weston-ini-conf
AgeCommit message (Collapse)AuthorFilesLines
2019-06-11Update weston ini file to adopt remoting pluginHarunobu Kurokawa1-7/+4
Bug-AGL : SPEC-2420 To use remoting plugin, we should use new section in weston.ini. Example) [remote-output] name=remote-1 mode=384x368@30 host=192.168.10.30 port=5005 Man) https://gitlab.freedesktop.org/wayland/weston/blob/master/man/weston-drm.man#L149 https://gitlab.freedesktop.org/wayland/weston/merge_requests/7 Change-Id: Ifc271867dd2b1f2fe1794a08af188006f7b7779b Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2019-04-04Upgrade to thudScott Murray2-2/+1
Changes include: - Add LAYERSERIES_COMPAT definitions to layer.conf files - Remove now unnecessary SECURITY_*FLAGS over-rides from distro configuration - Set intel-corei7-64 preferred kernel version to 4.19 to match latest linux-intel kernel available in meta-intel - Update qemuarm preferred kernel version to 4.18 to match latest linux-yocto - Update firmware package and devicetree file names for raspberrypi3 - Remove linux-firmware bbappend specific to raspberrypi, it seems no longer required and breaks the cross SDK build - Update linux-intel bbappend to 4.19, remove now unnecessary patch - Remove now unnecessary lttng-modules backport - Update linux-raspberrypi bbappend to 4.14 kernel - Added kernel configuration fragment for raspberrypi to disable Kprobes. This is required until linux-raspberrypi is updated to greater than 4.14.104 to avoid a build failure in lttng-modules related to a check for known breakage in the kernel CONFIG_OPTPROBES code. - Replace obsolete base_conditional usage with oe.utils.conditional - Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable faad PACKAGECONFIG to avoid commercial license issues - Remove unused and unbuildable Vayu gstreamer recipes - Update linux-ti-staging bbappend for new BSP kernel - Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz warning, and remove upstreamed fix_dcan_addresses.patch - Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is available in the upstream BSP - Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0 - Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply against 2.2.0 - Add ti-sgx-ddk-km patch to add AGL toolchain configuration file - Remove now unnecessary fdtoverlay recipe - Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle move of ivi-controller.so configuration in Weston 5.0.0 - Update connman-ncurses patch to remove fuzz warning - Add installation of systemd over-ride file for run-postinsts.service in run-postinsts bbappend to workaround race condition between ldconfig.service and the /sbin/ldconfig invocations in the post-install scripts run by run-postinsts.service. The observed failure was cynara's post-install script failing and its database not being created. - Remove now unnecessary valgrind backport - Add patches to fix most driver compilation against newer kernels - Update libmicrohttpd bbappend - Remove libssp-dev from agl-image-graphical-qt5-crosssdk and agl-demo-platform-html5-crosssdk, upstream have removed it from non-mingw32 platform SDKs - Update wayland-ivi-extension recipe to build 2.2.0, and update local patches - Update weston patches for 5.0.0. Patches: 0016-ivi-shell_add_screen_remove_layer_api.patch 0017-ivi-shell-register-ivi_layout_interface.patch have been removed as they have been applied upstream and are no longer necessary. Patches: 0018-compositor-add-output-type-to-weston_output.patch 0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch (both related to Waltham) have been disabled for now as they need significant rework. - Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict with weston-ini-conf - Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work around CMake+ninja issue in cmake-apps-module - Update dbus cynara patches for 1.12.10 - Add do_install_append in cynara recipe to remove /var/cynara from cynara package so the directory creation and labelling in the post-install scriptlet will function as intended - Remove now unnecessary e2fsprogs backport - Remove now unnecessary libcap-ng backport - Update pulseaudio patches to remove fuzz warnings - Update neardal patch to remove fuzz warning - Update freetype patch to remove fuzz warning - Rename opencv bbappend to 3.% to handle 3.x backports in upstream - Updated qtwayland patch to remove fuzz warning Changes from Stephane Desneux <stephane.desneux@iot.bzh>: - Remove wayland-ivi-extension PREFERRED_VERSION - Remove now unnecessary nativesdk-cmake patch - Remove now unnecessary ptest-runner patches - Remove now unnecessary harfbuzz patches - Disable waltham-transmitter as it does not build against weston 5.0.0 - Update af-main, cynara, and security-manager to use pkg_postinst_ontarget - Bump connman-ncurses revision to avoid deprecated ncurses functions - Update libva package usage with new intel-vaapi-driver name - Add patches to security-manager to fix compilation with gcc8 - Updated systemd bbappend Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>: - Remove meta-agl-bsp/ROCKO.FIXMEs - Remove linux-yocto_4.12.bbappend and now unnecessary associated patch - Remove now unneeded kern-tools-native patch - Bump gstreamer PREFERRED_VERSIONs to 1.14.x - Remove latencytop from packagegroup-agl-core-devel, it has been dropped by upstream - Remove now unnecessary rpm patches - Update pulseaudio bbappend to 12.2 - Update opencv bbappend to 3.4 - Update freetype bbappend to 2.9.1 - Update dbus bbappend to 1.12.10 - Update weston bbappend to 5.0.0 - Update cynara patches to remove fuzz warnings - Add patch to cynara to fix compilation with gcc8 - Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on sumo or newer Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>: - Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter bbappend to version 1.0.1 Known issues (marked with FIXME): - CMake+ninja issue in cmake-apps-module has been worked around with OECMAKE_GENERATOR - waltham-transmitter and the patches to weston related to it have been disabled - Currently unclear if patch to libcap-native is actually required or not Bug-AGL: SPEC-1837 Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-12-07Fix missing ivi-id-agentTadao Tanikawa2-3/+4
The ivi-id-agent was missing because its configuration wasn't updated although it is changed by the following patch of wayland-ivi-extension in meta-agl-demo. 22c9537 wayland-ivi-extension: Added ivi-id-agent by mtey Change-Id: I6faf18735cc0a2b7caea97a77fab3e11eaedcc49 Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2018-12-06weston-ini-conf: update gst-record logicScott Murray1-2/+3
The logic to handle the "virtual-output" and "gst-record" DISTRO_FEATURES seems to be unfinished, this update replaces the "virtual-output" usage with just "gst-record", as the former does not seem to exist in the AGL codebase. The virtualoutput.cfg file has been updated with the arguments from the virtual output section in the replacement .ini file from the mapviewer-demo recipe in meta-agl-demo, but some further investigation is required into tweaking things to produce a final .ini file that matches that one. These changes are a first step to getting to that end goal. Change-Id: Ib99e0717ed1e66016c6e936a3c398addcb6adfb7 Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 262b016588cb153520362cf0aed3715e43d86672)
2018-08-08weston.ini: set proper configuration to panel-positionHarunobu Kurokawa1-1/+1
"panel-location" configuration is old. The current weston uses panel-position. Change-Id: Iae50bc72c4ece64effe0b9b5f57e8d5e76057478 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-07-24Enable weston to use systemd notifyTadao Tanikawa1-0/+1
Enable weston to use systemd notify to reduce causes of race condition between window manager and homescreen. Bug-AGL: SPEC-1471 Change-Id: I6431b5d52f38b982f6691b2961938664cc4f0544 Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2018-05-313rd part of the layer/profile rework [1/2]Jan-Simon Möller8-18/+32
This is the last larger commit in this series and deals with the graphical part. We introduce the graphical profiles: - meta-agl-profile-graphical -- meta-agl-profile-graphical-html5 -- meta-agl-profile-graphical-qt5 Notable changes: - weston-ini-conf moved to the meta-agl-bsp layer. Most BSPs have bbappends, so we need to have the recipes present (but unused) even in the console images. - new image: agl-image-boot = terminal-only + network + package-manaager. Ready for using package-feeds - new image/sdk: agl-image-minimal-crosssdk - agl-service-mediaplayer has a dependency on weston, thus it cannot be in the 'core'. Moved it to profile-graphical. - The wayland-ivi-extension moved to the agl-demo-platform. - The app-framework layer included and pulled 'web-runtime' as dependency. This broke console-only images. This has been moved to be in meta-agl-demo only for now. - added and massaged the agl-features. - found and added a useful script 'oe-depends-dot' that helps to work with the dot files (produced with bitbake -g) Todo: - we'll need another pass through the packagegroups. The dependencies for the layers/profiles are now sorted-out but we might have to add/shuffle a few packages. For further details, see meta-agl/docs/profiles.md. v2: fix meta-agl/meta-security/conf/layer.conf - the immediate expansion previously used in there caused some recipes not being added to BBFILES. v3: fix packagegroup renaming (packagegroup-agl-devel -> packagegroup-agl-core-devel) v4: fix missing packagegroup inclusion (tnx Jose, Scott, Stephane) v5: fix missing packagegroup inclusion v6: explicitely put profile-graphical-qt5 on-top of profile-graphical v7: re-add 'procps' when agl-devel feature is on Bug-AGL: SPEC-145 Change-Id: I24cdcd1118932758d0c55d333338238f2a770877 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-03-13wayland: weston-ini-conf: change virtual.cfg to 1080p and rotate 270 degreesMatt Ranostay1-2/+3
Rotate screen to horizontal orientation allow 1080p output that mirrors a LCD panel Change-Id: I7b8a6a9841b726f68087a4f5bb18ed80517e4e9a Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2017-10-20weston-ini-conf: Rework to use fragments to construct weston.iniTom Rini1-0/+17
Switch to constructing the weston.ini from fragments of files instead of variables and variable flags. This allows for much easier tracking of signatures by leveraging existing mechanisms. Update the Readme to explain how to do the various operations with fragments as well. Note that for QEMU we do not need to pass -show-cursor as it's already provided and we do want to change the VGA driver to one that reliably provides DRM support. For the HDMI connected screens, rather than name them by vendor name them first for connection and then required transformation for correct orientation. For board-specific options, move them to the board directories. When we need to change existing cfg options, rather than replace them the proper location to do this in is the do_configure function. Bug-AGL: SPEC-964 Change-Id: I2cceb4fd64f51eb2ab1d47419b77153cf02d7c12 Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/11375 Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>