Age | Commit message (Collapse) | Author | Files | Lines |
|
Since CES2017, AGL doesn't use 'layer-add-surfaces' command.
wl-shell-emultor.so is only required by 'layer-add-surfaces'.
So we can remove wl-shell-emultor from AGL.
Bug-AGL: SPEC-341
Change-Id: I0cad29ff1534e8d3fd4b94f8a13490b9fa19918e
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Since the Weston DRM backend does not work with the video card implementations
in VirtualBox and VMWare player, and has some outstanding issues on QEMU that
have resulted in GenIVI not enabling it[1], disable it for now. A comment has
been added to the QEMU weston.ini indicating that the DRM backend can be
re-enabled to potentially gain higher performance.
Additionally, the common weston.service systemd unit has been modified to
add the --tty option to weston-launch to start weston on /dev/tty1. This is
now required to avoid console messages writing on top of the HomeScreen in
QEMU, and is harmless to operation on the other platforms.
[1]: https://github.com/GENIVI/meta-genivi-dev/pull/34
Bug-AGL: SPEC-405
Change-Id: Ic0c0adeb15baf392e3ffa0bbd26c62d060df1ef5
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Change-Id: Ib539b9391b95029de425fd8a2edbef1ebad3fbb7
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
CES2017 demo depends on it.
Change-Id: I9a01d106175fcfaba74195c9c6efe6e8f2bda4a5
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
|
|
Using IVI-shell as default for following platforms:
- QEMU
- Renesas
- Raspberry Pi
The IVI-shell is needed to run the CES 2017 demo.
Signed-off-by: Bocklage, Jens <Jens_Bocklage@mentor.com>
|
|
These variables need to be conditional to qemu* (intel-corei7??) and
should not pollute other targets.
Use OVERRIDES here to avoid cut-n-paste.
Change-Id: I6eec3de2da0143c0a3ee40beaf73ba77acfe0a3d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The DRM backend is the native Weston backend for systems that
support the Linux kernel DRM, kernel mode setting(KMS), and evdev
input devices.
This patch set the DRM backend as default and also enable bochs
display vga interface for qemu std vga.
To use the DRM backend for Weston, the option "-vga std" should be
set into qemuparams for runqemu script, like below:
qemuparams="-vga std"
Change-Id: I04591999a0a3f7205e42585150e8f50e7414f9ac
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Notable changes:
- Update poky-agl.conf for YP 2.1 krogoth
- change mesa bbappend to mesa_11 - TODO: check need for gallium, or replace with DRM see SPEC-237
- remote linux-yocto_3.14 as it is no longer shipped with YP 2.1
- rtl-sdr got a fix included for its packageconfig file
- update 0001-disable-when-booting-over-nfs.patch
- update checksums for ft2demo - TODO: check installation of test binaries
- automotive-message-broker needed a workaround in the recipe - TODO: fix package and recipe
- wayland-ivi-extension fix for use of autotools _AND_ cmake at the same time: only use cmake
- port pulseaudio_6.0.bbappend to pulseaudio_8.0.bbappend - TODO: check patches and forward-port
- agl-audio-plugin is currently disabled until ported to pulseaudio 8.0
- gstreamer1.0_1.2.3 is only used by meta-renesas, thus move it there
- update dlt-daemon to 2.15
TODO:
- check values in poky-agl.conf
- check mesa for needed bbappends on other boards (tested qemux86 and qemux86_64)
- check pulsaudio bbappend and forward-port patches (patches disabled!)
- check agl-audio-plugin and forward-port (build disabled!)
- check freetype bbappend wrt. installation path of test binaries
- check automotive-message-broker wrt installation routines for libraries (QA failure)
- check wayland-ivi-extension build and capabilities
Change-Id: I553e03cc37348cba2fc4a022820157c78bb184d3
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
No longer Gallium EGL driver (gallium-egl) is needed.
Change-Id: Ic3d9abc1c3c0a25a3d4ec9daa330646b8c86e291
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
To configure for MinnowBoard MAX, use 'intel-corei7-64' as MACHINE.
E.g. set up build environment by meta-agl's script:
$ source meta-agl/script/envsetup.sh intel-corei7-64 [build-dir]
There are instructions to write image into SD card and boot system
at "http://elinux.org/Minnowboard:MinnowMaxYoctoProject".
Change-Id: I19062482848bb6157791ab698bf92984e24a6d9a
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Allow to build newer versions of Weston.
"gallium-egl" disappeared from Poky > 1.7 (because it
disappeared from upstream Mesa, too). Still try to detect
and build it if it exists, but do not fail otherwise.
Change-Id: I01c3988e2da6a4fe66a80e5a5b1262cc6c1da727
Signed-off-by: Manuel Bachmann <manuel.bachmann@iot.bzh>
|
|
To boot weston image on emulated machine QEMU, a new sub-layer
`meta-agl-bsp` is added.
When bitbake agl-image-weston or agl-image-ivi With this layer,
weston GLES can run on QEMU with GLES support.
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|