Age | Commit message (Collapse) | Author | Files | Lines |
|
Refresh the mesa patch applied dynamically when meta-virtualization is
being used so it applies cleanly. It is still unknown if the patch is
required for the KVM demo, but fixing it up is required to have the
IC EG container demos to build.
Bug-AGL: SPEC-5123
Change-Id: Ib1c8b623d78ca0453d3418e565dbe86bdc344fb5
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29898
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Rename the meta-virtualization dynamically applied bbappends to
handle the newer versions in YP 5.0 / scarthgap. To some degree
these changes are placeholders to facilitate building the IC EG
container demo images, as the configuration for that pulls in
meta-virtualization. The virtio support related changes the
bbappends apply here need to be reworked to be actually workable
for the KVM demo images and potential downstream users.
Bug-AGL: SPEC-5123
Change-Id: I473fa4a64837cedd704f8fb2e7cbd52fa2114d21
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29879
ci-image-build: Jenkins Job builder account
Reviewed-by: Naoto YAMAGUCHI <naoto.yamaguchi@aisin.co.jp>
Tested-by: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-boot-test: Jenkins Job builder account
|
|
These changes should allow the etnaviv GPU driver using NXP i.MX6
and i.MX8 machines (e.g. cubox-i, imx8mq-evk) to build. Testing on
hardware is required for the i.MX6, and etnaviv does not seem to be
working on the i.MX8MQ-EVK as the previous devicetree tweak being
used no longer seems applicable. Further investigation will be
done in the near future as time permits.
Notable changes:
- The i.MX6 configurations have been switched to using the linux-fslc
kernel instead of linux-fslc-lts, as the latter is older (6.1 vs
6.6).
- The kernel patch against linux-fslc-imx to enable the MHDP driver
when using etnaviv has been removed since it is no longer required.
- The local workaround to allow enabling the "wayland" PACKAGECONFIG
when building weston-imx has been replaced with use of the now
provided upstream variable that allows that. Note that building
with this version of Weston has not been tested since it is tied to
using the Vivante GPU driver.
Bug-AGL: SPEC-5122
Change-Id: I75810dd152197f9435158839fad00327ed7e42e7
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29878
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The BBMASKs of the gstreamer bbappends from meta-rcar-gen3 need
to actually be in the base agl_rcar-nogfx.inc include file, as
otherwise the "nogfx" machine configurations will suffer from
the gstreamer plugin build and version mismatch issues.
Bug-AGL: SPEC-4578
Change-Id: Ief2624dfdec8df995cea9c9cc3c337eadd172074
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29853
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The scarthgap-dev branch of meta-rcar-gen3 has bbappends for the
gstreamer1.0-plugins-* and gstreamer1.0-omx recipes that effectively
build the Renesas 1.20.3 forks and package them as 1.22.x. This
breaks building gstreamer users since there are mismatches between
the main gstreamer package contents and the plugins.
To fix this for now:
- BBMASK out the bbappends
- Update our gstreamer1.0-plugins-bad bbappend to enable the KMS
plugin to avoid breaking the BSP gstreamer plugins packagegroup.
This can be removed once we no longer need to BBMASK the upstream
bbappends.
- Remove the rcar-gen3 version of our local patch against
gstreamer1.0-plugins-bad, as it no longer applies (since rcar-gen3
will be using the upstream version for now). This can be revisited
when meta-rcar-gen3 is updated to resolve the mismatch.
As a bonus, the now unnecessary network flag overrides we were doing
for the gstreamer plugin recipes have been removed, as they are no
longer required.
Bug-AGL: SPEC-4578
Change-Id: I4e6f1646c93d981744e65dddf6753c3dc005426e
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Update rcar-gen3 gstreamer bbappends for new version in scarthgap.
Bug-AGL: SPEC-4578
Change-Id: I7f3e43b85157201457c67d91a32f7a18b44a6050
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
linux-firmware-rpidistro now requires acceptance of "synaptics-killswitch"
license, document it accordingly.
Bug-AGL: SPEC-4578
Change-Id: I2b7ffd3eb26e35b917ad1d0f6589f05010b71c99
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
meta-raspberrypi now has new version of dtc, so update bbappend accordingly
Bug-AGL: SPEC-4578
Change-Id: Icf771530d0259cf2b3566877f29fe22d53288e79
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
No need to for the backported patch that is now part of the new Mesa version.
Bug-AGL: SPEC-4578
Change-Id: I03cf0fac10d6b6bd4a2eb2fff239ea924916d6b0
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
|
|
Switch to scarthgap in LAYERSERIES_COMPAT in layer.conf files.
Bug-AGL: SPEC-4578
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I2c690c02a55bb0ddca9231bdf405a5f21486db3f
|
|
This adds templates to build for the TI AM62XX platform.
Bug-AGL: SPEC-5103
Change-Id: Ica467a7ca464da87c5a50a54b6cd1f1f86c50d98
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29782
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
|
|
The template needs meta-python present and the
kernel recipe does try to install a firmware file
that is not packaged. Remove that.
Bug-AGL: SPEC-5101
Change-Id: I3fdb860df04ee90e3e3b30875ea4f9494b15dbf0
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29744
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
|
|
This adds templates to build for the RaspberryPi 5 platform.
Note that meta-raspberrypi doesn't yet have U-boot updates for the platform,
will be added later.
Bug-AGL: SPEC-5094
Change-Id: Idede92ca5d9b678ee2f9ea0869e64da04dd719ea
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29735
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Update local patch that fixes menuconfig to apply against updated
linux-raspberrypi kernel version.
Bug-AGL: SPEC-5069
Change-Id: I341859acb4b77aff5ebce88da66089ac6263789f
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29719
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
|
|
To remove the use of a "virtual/" prefixed RPROVIDES as part of
futureproofing for YP 5.0 / Scarthgap, rework the machine-specific
gpsd configuration scheme to based on the gpsd-machine-conf recipe
that is intended for this upstream.
Bug-AGL: SPEC-5067
Change-Id: Ie7fda1e936982e7d43bb0af6ee4e90ab4dae9477
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29688
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
|
|
The firmware files enable the amd graphics cards.
Bug-AGL: SPEC-5074
Change-Id: I283e013b5f4951a26475083026b4b5425ee1132a
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29678
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
|
|
This commit enhances the way we select the DEFAULTTUNE.
DEFAULTTUNE in AGL is meant to be set to either
corei7-64 for x86-64
aarch64 for 64bit ARM
armv7vethf-neon-vfpv4 for 32bit ARM (where applicable)
The reason is that we do want to work towards a binary distro and
also maximize sstate reuse between platforms. Each and every board
having different settings is counter-productive here.
The original setting was done in SPEC-491. See this presentation:
https://docs.google.com/presentation/d/1_VSGfheItufCCP_rbGBDg3-2miCyh02-yZva6m8cyUE
The enhancement is that we introduce a variable 'AGL_DEFAULTTUNE'
that a user could override if he really needs to change the defaults.
Also we introduce OVERRIDES to help support this mechanism
(agldefaulttune, forcedefaulttune).
Bug-AGL: SPEC-491
Bug-AGL: SPEC-5014
Bug-AGL: SPEC-5016
Change-Id: Ia8270b6195116151c27d8da427f0456f38ac95b6
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29541
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Reset PR that is being set in meta-ti-bsp, which uses '-' symbol not accepted
by rpm:
| error: line 4: Illegal char '-' (0x2d) in: Release: sgxrgx-54fd9d7dea098b6f11c2a244b0c6763dc8c5690c.1
Bug-AGL: SPEC-4941
Change-Id: Id28d4a8bf06269b90965dda30d6587a1b877989e
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29524
Tested-by: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
|
|
Local patch to recognize AGL toolchain when building meta-ti SGX module
is no longer required.
Bug-AGL: SPEC-4941
Change-Id: Ic5870a75a75d2f8a649b14044cb6b5c99c1e549c
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29523
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
|
|
This adds templates to build for the BeagleBoard.org BeaglePlay platform,
which is based on Texas Instruments AM625x SoC.
https://www.beagleboard.org/boards/beagleplay
https://www.ti.com/product/AM625
Bug-AGL: SPEC-4941
Change-Id: I21130e2b8f719f227f5c33045b7e5a3728247bfc
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29522
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account
|
|
Now that TMPDIRs are separated for meta-ti multiconfigs[1], move deploy
dir back into the main TMPDIR, where AGL CI expects the artifacts.
[1] https://git.yoctoproject.org/meta-ti/commit/?h=kirkstone&id=d725334e9c010ca9ea139d9089f0bcfa593cd106
Bug-AGL: SPEC-4941
Change-Id: Ia627b4c9e561099b069a4bf43511f7084815d31c
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29521
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
No need to adjust LIC_FILES_CHKSUM anymore after this fix:
https://git.yoctoproject.org/meta-ti/commit/?h=kirkstone&id=523a1e604d7dc94996573d0242187e5b6395b704
Bug-AGL: SPEC-4941
Change-Id: I2df3a234ac8058ebbb5f28d2a036341b85fe9c0e
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29520
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Update the meta-rcar-gen3 driver specific bbappends to use the
"video" group instead of "display", and remove the weston-init
bbappend that was adding the "display" group when using it with
weston. The group is no longer used in meta-rcar-gen3 or in any
of the AGL layers since the rework done for SPEC-4714; these
uses were missed at that time, and were causing permission issues
with the PVR driver initialization scripts.
Bug-AGL: SPEC-4979
Change-Id: I2efc8ea6e83b86e59def8a8333c8cc3064f8a7dd
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29456
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
|
|
This adds templates to build for the BeagleBoard.org BeagleBone AI-64 platform,
which is based on Texas Instruments J721e (TDA4VM) SoC.
https://www.beagleboard.org/boards/beaglebone-ai-64
https://www.ti.com/document-viewer/TDA4VM/datasheet/
Bug-AGL: SPEC-4941
Change-Id: Ie32a93178697907b6a71272af0bd3b1f453e1640
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29351
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Meta-ti-bsp breaks expectations of the output folder in its layer.conf
Enforce the usual folder structure.
Bug-AGL: SPEC-4957
Change-Id: Ie887e83015dcb9be609289442840b131cbad1b32
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29379
|
|
Add the amd / radeon drivers for pci-e gfx support.
Bug-AGL: SPEC-4909
Change-Id: I91e17f378a84dd7ab767495352c289e4e6ba3fa6
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29252
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
This adds the templates to build for the sifive-unmatched board.
Currently we have to tweak the layer.conf to enable kirkstone to build.
v2: Simplify addition and add patch to agl-compositor for -latomic
v2: rename template to just the boardname to match all other boards
v3: Drop patch and use LDFLAGS:append:riscv64 = " -Wl,--no-as-needed -latomic -Wl,--as-needed"
Bug-AGL: SPEC-4909
Change-Id: I6b6fd9e7f316c66c5a9160318c64028faf8f5dea
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29234
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
supporting agl-image-minimal and agl-telematics-demo-platform
Bug-AGL: SPEC-4907
Change-Id: Ibc0ae906de5ceb6bb2f945b1c505bd37ff3bfb1d
Signed-off-by: Loc Nguyen <loc.nguyen.wt@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29219
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This commit restructure the .inc files relate to H3/M3 Salvator-x boards.
Bug-AGL: SPEC-4808
Signed-off-by: Hau Vo <hau.vo.ra@renesas.com>
Change-Id: I9e01f61f75010c1cbf54feec30422855b43cf051
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29175
Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Remove our usrmerge workarounds since meta-rcar-gen3 now has been
fixed. Also remove now unnecessary workarounds for the "display"
user and weston systemd unit naming.
Bug-AGL: SPEC-4854
Change-Id: Ieaebb24385f9d75eaad012043993dcfc733aa01a
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/29043
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Remove the use of a systemd user session to align with how upstream
runs Weston, and to allow using all systemd sandboxing features with
the compositor and homescreen, launcher, etc. applications. The
changes for this touched enough packagegroups and images that further
rework was done to address some of the cleanup described in SPEC-4813,
see below for details.
Changes:
- Remove agl-session and update various recipes that were manually
adding dependencies to the user session it created. The compositor
(be it weston or agl-compositor) and Wayland clients now run in the
system session as non-root users.
- Revive agl-users recipe, this time living in meta-agl-core, with
the purpose of creating the agl-driver user. For simplicity,
agl-compositor is always run as the agl-driver user, as opposed to
trying to wrangle running it as different users depending on build
configuration. This can potentially be made more configurable if a
downstream user has a usecase to be able to specify another user.
- Fully split agl-compositor's systemd unit with a tweaked fork of the
weston-init recipe and unit which lives in meta-agl-core. This will
be easier to maintain than the attempt to reuse weston-init for
builds without meta-app-framework that was done previously.
- Create packagegroup-agl-graphical-compositor, distinct from the
weston packagegroup. This should make it more straightforward for
downstreams that want agl-compositor or weston.
- Rename agl-image-agl-compositor to agl-image-compositor to remove
redundancy.
- Tweak the logic for the inclusion of a few debug packages (e.g.
agl-shell-activator) to ensure they only show up in images when
agl-devel is enabled.
- Split weston-terminal and the required icon resources into separate
packages in our weston bbappend to avoid pulling in weston just to
get the terminal for testing.
- Add a agl-core-image.bbclass to use as a base for images.
- Move our cross-SDK configuration to a agl-crosssdk.bbclass to ease
reuse.
- Remove various empty packagegroups.
- Unify image .inc files with their .bb files as a simplification,
and to move towards more how upstream Yocto Project does things.
- Split pipewire tools into their own -devel packagegroup.
- Remove rcar3 additions to packagegroup-agl-graphical-multimedia, as
that packagegroup is not machine-specific. They will be added back
in via a change in meta-agl-demo. If a downstream user desires a
platform-specific packagegroup for such packages in meta-agl-core,
this can be revisited, though a different implementation should be
used.
- Replace some :append usage with += to avoid creating problems
for downstream users.
Bug-AGL: SPEC-4714, SPEC-4813
Change-Id: I55b29bf749f0d5d50993a362c665bce62b785f67
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28996
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The previous commit used an old file. Use the new generated version.
Bug-AGL: SPEC-4822
Change-Id: Ic1b7018ce2840332c0e051101ce854b90f96ecae
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28985
Tested-by: Jenkins Job builder account
|
|
The weston-ini-conf was not ready for dual-screen setup.
Fix it.
Bug-AGL: SPEC-4822
Change-Id: I75d8810fb9e58aadeceabeadf44ceedff4749d6e
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28984
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Changes:
- Since linux-fslc-lts does not boot on the EVK at the moment,
and both it and linux-fslc still do not have support for the
HDMI output, switch back to using linux-fslc-imx with tweaks
to use etnaviv as we did pre-kirkstone.
- A bbappend has been added for linux-fslc-lts since that was
missed in a previous upgrade, and even though we are not using
it now, it is possibly useful for other i.MX variants.
- A machine template for using the NXP BSP with the Vivante GPU
driver, imx8mq-evk-viv, has been restored, as testing shows it
now works with the current panel-less homescreens. As before,
the intent of this configuration is for testing or as an example
of potential production use of meta-freescale where NXP support
is available.
- Start up of Bluetooth support has been disabled, as it currently
causes kernel oopses or panics (both have been seen in testing).
This happens with both machine templates. SPEC-4807 has been
opened to track this issue.
Bug-AGL: SPEC-4799
Change-Id: I38e4e720643714541efb0fed08d5ab64545bb02d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28925
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Current AGL run each process by agl-driver user, that user
need access permission for GPU. The old AGL use display
group to accept access for GPU, but current agl-driver
user join to video group that is default group for GPU.
This patch remove unnecessary group change at
meta-agl-bsp for R-Car.
Bug-AGL : SPEC-4797
Change-Id: Ife20dea685035b336675304a5c6fc292ed83deb6
Signed-off-by: Naoto Yamaguchi <naoto.yamaguchi@aisin.co.jp>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28890
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add bbappend to apply AGL kernel config fragments to the new linux-bb.org
kernel recipe used in meta-ti-bsp for Beagle platforms now.
Bug-AGL: SPEC-4785
Change-Id: I2ca57d4a70b296fd00e72520ada267d96a149a21
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28857
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
kernel-module-vspmif package name is no longer used. We should
correct kernel-module-vspm-if in these files.
Bug-AGL: SPEC-4780
Change-Id: I782319295fa0607a97971188a0322398a187b680
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28782
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Using GL-renderer on qemu without any acceleration support such as
kvm results pretty much higher cpu consumption. To avoid it, we'll
use pixman-renderer on qemuarm and qemuarn64.
Bug-AGL: SPEC-4165
Signed-off-by: Hiroyuki Ishii <ishii.hiroyuki002@jp.panasonic.com>
Change-Id: Iaffe1bd624d6f1c6df9af67e33cc1fa2168293ac
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27066
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Latest TI graphics completely redone its dependencies and preferences
to be aligned with upstream and use Mesa packages as proper providers
for GBM, EGL, GLES, etc. components. There's no more need for local
workarounds to adjust graphics settings.
Note: SGX is currently set in meta-ti-bsp to fall back to software
rendering and will be fixed later. Rogue in newer K3 devices is fully
functioning though.
Bug-AGL: SPEC-4723
Change-Id: I072a5e25bdbb444db8e7d4b87a1f181c349240ea
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28744
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Latest TI graphics completely redone its dependencies and preferences
to be aligned with upstream and use Mesa packages as proper providers
for GBM, EGL, GLES, etc. components. There's no more need for local
workarounds to adjust graphics settings.
Note: SGX is currently set in meta-ti-bsp to fall back to software
rendering and will be fixed later. Rogue in newer K3 devices is fully
functioning though.
Bug-AGL: SPEC-4723
Change-Id: Ifb6f594c6203924aa1b90f421d475b716c61a796
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28743
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
|
|
Latest TI graphics now uses Mesa, but it uses a slightly newer and
patched version of Mesa for SGX and Rogue GPUs. Since generic mesa
virgl patch from meta-agl-bsp/core already exists in that version
of Mesa, need to skip applying it here.
Bug-AGL: SPEC-4723
Change-Id: I795e2bf41bea8305be25418de7cc3262aefb3b4a
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28742
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
SPEC-4724 added a generic backported patch to mesa. But instead of
adding it directly to mesa_%.bbappend, it should have been added to
mesa_agl.inc which is only active when "aglcore" feature is enabled,
making it yocto-check-layer safe.
Bug-AGL: SPEC-4723
Change-Id: I226cba14de917f6e4109d1dc1df364cb74e7ee45
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28741
Reviewed-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Latest TI graphics package uses udev rules to initialize the driver
and does not install legacy SysVinit rc.pvr script unless udev isn't
available. No need for systemd service workaround anymore.
Bug-AGL: SPEC-4723
Change-Id: I3ce5d270357578086152d87fb2cf91512691e1a9
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28740
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Latest TI graphics libraries for SGX and Rogue GPUs no longer include
Mesa pieces, but rather build on top of proper Mesa packages (although
patched). Remove local bbappend disabling GBM.
Bug-AGL: SPEC-4723
Change-Id: I8a4ba82d0e7540d6fe2da7efdcefab7a2dc77c6b
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28739
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Use AGL_FEATURES instead of DISTRO_FEATURES.
Change-Id: I9a866a4b921e2816613784768c60b874da28a16c
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28681
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
As was done in commit 32744858 for the plain h3ulcb/m3ulcb MACHINE
configuration, add rcar-gen3 overrides to the Kingfisher variable
tweaks to avoid unwanted side effects when building for other
MACHINEs when using multiconfigs. This is needed to be able to
build the KVM demo image for h3ulcb-kf.
Bug-AGL: SPEC-4760
Change-Id: Ie52f0a4a586398875f88e558ef465162c9fdfec1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28655
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This adds
0001-virgl-don-t-a-use-staging-when-a-resources-created-w.patch which is
a backport from mesa 22.2.5 as a tentative fix for running on virgl on the x86
platform.
This issue seems have been fixed 22.2.4 and 22.2.5, but the original
change was initially quite a long time before in 22.0.X and we seem to
be using 22.0.3.
This also seems to affect Xen when updating it from 4.16 to 4.18.
Bug-AGL: SPEC-4724
Change-Id: I255e30d8e513b8f3bbfa720a24c1afcbd40af2c9
Reported-by: Rahul Kumar <Rahul.Kumar1@amd.com>
Tested-by: Rahul Kumar <Rahul.Kumar1@amd.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28580
Tested-by: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This would fix fetch build failures with the gstreamer plugins which seems
to have been caused by a git to gitsm replacement in the original
recipes.
Bug-AGL: SPEC-4730
Change-Id: I4b1d700a6645d280b65f3f3202b76208d30061e7
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28583
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
The usrmerge fixes added to the various rcar3 kernel bbappends turn
out to cause issues when using linux-dummy as the kernel as the
IC EG system containers do, add the required extra checking to avoid
issues.
Bug-AGL: SPEC-4703
Change-Id: I7749c9f921791a7c143a7003827939af64997a5c
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28472
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add a meta-rcar-gen3 specific weston-init bbappend to add the
weston user to the display group. This is preferable to unmasking
the bbappend in upstream meta-rcar-gen3, as we do not want any of
the other changes it contains (or may contain). This change is a
bit of a stopgap required for running weston or agl-compositor as
the weston user without the agl-driver user session unit in e.g.
the agl-image-weston image or the KVM or IC host images.
Future work will try to align the required groups with upstream
systemd-udevd expectations.
Bug-AGL: SPEC-4618
Change-Id: I22e8aaa095114802242fb1ed150dec2a5055fda9
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit c1b436f4882737ce0b9a95853954d0f4daab2d86)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28419
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|