summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp
AgeCommit message (Collapse)AuthorFilesLines
2016-12-28meta-raspberrypi: disable debug loggingScott Murray1-1/+1
Set CMDLINE_DEBUG in linux-raspberrypi_4.4.bbappend to disable the debug logging by the kernel and systemd that was spamming the console. As a side benefit, this noticeably speeds up booting. Change-Id: Ic99b1626ea20a27d3d157bcb952ec30cd50baeb2 Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2016-12-28meta-ti: weston: remove unneeded ivi shell patches and use standard ↵Matt Porter13-1859/+1
ivi-controller The meta-arago layer included a number of ivi shell patches that are not needed in AGL. One multi screen patch conflicts with another bbappend causing build issues as it's already included by a less specific layer. Further, the added "simple TI layout controller", autolaunch, and screenshooter features are all unneeded in AGL. These are removed to reduce the amount of non-essential patches we carry within AGL. As a result of this, all weston.ini directives which use the "simple TI layout controller" directives are removed and weston.ini is switched to use the standard ivi-controller so that WindowManager may run and access the ILM API. The end result is that WindowManager and HomeScreen may now be launched after boot successfully. Change-Id: I8d777fbd4c02acbf9d3ccaeb215b651a8562d5bb Signed-off-by: Matt Porter <mporter@konsulko.com>
2016-12-24meta-intel: Fix for the sdk build failure for Intel platformsKien Dinh1-3/+2
Removed linux-firmware-ibt since it is only necessary for the Joule platform. Change-Id: Ia4916fbc777299df4a094874ad1585a43a46d39b Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
2016-12-22dra7xx-evm: weston: Align orientation with psplashKarthik Ramanan1-1/+1
The psplash is oriented 180 degrees rotated compared with the HomeScreen application, this change will ensure that they are in sync Change-Id: Ic2a588ff3a061ff500d4050a6915fe5c899a1e7e Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-12-22meta-oic: Hotfix to pull gdbus-codegen from glib-2.0-nativePhilippe Coval1-0/+1
It was discovered while building iotivity-1.2.0 using Intel BSP Bug-AGL: SPEC-158 Change-Id: I4c735a276d3a484a330ef1ea8611105e6a84e35a Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>
2016-12-22dra7xx-evm: u-boot: Change default supported display to OSDKarthik Ramanan1-1/+1
The latest dra7xx-evm purchased from ti.com comes with the OSD display, this change will allow the AGL nightly images to work on the latest dra7xx-evm by default. If the user has an older EVM, then the uEnv.txt should be modified to match the connected displays. The complete list of supported LCDs can be found by checking the /boot folder of the the rootfs. Change-Id: I7f7ac06a49670eb8b7446a6b27854bee4b76ace6 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-12-22dra7xx-evm: make HomeScreen application fullscreenKarthik Ramanan1-0/+24
Tested and verified on the Rev H EVM with OSD display Should work on all other supported displays too. Change-Id: Ib8f210ebf84a0f36fbc87c4553d13ff984874051 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-12-22Revert "Disable SoC sound driver in porter board"Harunobu Kurokawa2-17/+0
The audio bug is fixed (SPEC-365), so that it should be revert this commit to enable sound driver. This reverts commit 1a70e5e8f48f17f604ab243dfb3ff01f7aa435f6. Change-Id: I362a900e86cdf7888e5726a6a0a56daeb0d33145 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2016-12-21Change kernel config to enable wifi of ralinkKazumasa Mitsunari4-2/+6
This enables wifi dongle of ralink, for example BUFFALO wifi dongle. Change-Id: Iab408fd5f54feecfadb4f25adab978b0df89d66d Signed-off-by: Kazumasa Mitsunari <kazumasa_mitsunari_za@mail.toyota.co.jp>
2016-12-21dra7xx-evm: weston.ini: remove stale test binaries/screens and add required ↵Matt Porter1-50/+2
modules Remove some launched applications that either don't exist or were used for basic BSP testing. Add drm-backend and ivi-input-controller modules. Fixes weston config so the HomeScreen can now be launched. Change-Id: I2c6e507ccd244c26e8b5f5cf0ad0f68ae9a18495 Signed-off-by: Matt Porter <mporter@konsulko.com>
2016-12-20Enabling build for Intel's Joule boardktdinh4-1/+41
This adds neccessary firmware to support the Joule board, including wifi and bluetooth. Change-Id: Ia6973415113119aaf60fff0dbb494027fba96fd5 Signed-off-by: Kien Dinh <kien.t.dinh@intel.com>
2016-12-17Disable SoC sound driver in porter boardNaoto Yamaguchi2-0/+17
The Porter board currently has a problem that pulseaudio can not be used due to the sound driver. I enabled USB Audio as a workaround, but we had to manually change the default sound device. As a further workaround, disable the SoC sound driver on the Porter board. Change-Id: Ie53b75ea0bc252b82910e518da62d2748147fc90 Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
2016-12-16bbappend to add Intel extra driversDominig ar Foll (Intel Open Source)1-0/+13
Change-Id: I11b245aea28b76f17cba3cdc8c964129bbaf906b Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-12-16Enable USB Audio in porter boardNaoto Yamaguchi3-3/+26
This patch is to avoid the problem that pulseaudio can not be used in the Porter board. This patch does the following two correspondences. 1. Enable USB Audio config 2. Corresponding to problem of self-destruction by outputting a lot of printk Change-Id: I58682c0755e04e87ec198dd0494d6f9380ebe4ce Signed-off-by: Naoto Yamaguchi <i33399_YAMAGUCHI@aisin-aw.co.jp>
2016-12-15Disabling LVDS-1 outputTadao Tanikawa1-0/+5
If HDMI and LVDS were both enabled, parameters about screens become inconsistent on weston. As a workaround until root cause is fixed, disabling LVDS from weston.ini. Change-Id: I150c0ba5e9655974f7dc365c2168fe7e2d7d93ab Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2016-12-15weston-raspberrypi.ini: Add commented out mode for GeChic 1502iScott Murray1-0/+2
Add the commented out mode line for using the GeChic 1502i in 1080p so that it's easy to enable it for the CES demo setup. Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Idcdf25188d3391403ee29c5bda7568c652b4c730
2016-12-14new default weston.ini for IntelDominig ar Foll (Intel Open Source)2-0/+39
Change-Id: Id899777abafd84bc2c7eb9d3ba0a22906a45c7cb Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-12-12correcting bbappend localisation for Intel USB wifi supportDominig ar Foll (Intel Open Source)1-13/+0
Change-Id: Ic60a3d8271a14729032f0757df8aa2f8108b7798 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-12-09Adding more drivers as modules for USB devices on IntelDominig ar Foll4-0/+187
Change-Id: Ie854777d28f455082bafdee07f36ab21c025dc68 Signed-off-by: Dominig ar Foll <dominig.arfoll@fridu.net>
2016-12-07Enabling HW acceleration for Intel with libva and correct libva incorrect ↵Dominig ar Foll (Intel Open Source)1-0/+4
runtime dependency with x11 Change-Id: I175b0d9900d61546cb0f116a1d698ee1f60b84b7 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net> Correct libva incorrect runtime dependency with x11 Change-Id: Ic4231c217c8c63575a98d370c898b8cb04e3a980 Signed-off-by: Dominig ar Foll (Intel Open Source) <dominig.arfoll@fridu.net>
2016-12-06add namespace to config kernelRonan2-0/+8
* missing namespace into defconf Change-Id: I9f292f8186fb771f8eb8c82ad8e7e985c474e9ea Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2016-12-02optee-os depend on python-pycryptoRonan1-0/+2
* optee-os use python script to build so, We need to add: inherit pythonnative If not we use host python during the build. * During the build, optee-os use script: - scripts/pem_to_pub_c.py - scripts/sign.py Those script depend on python-pycrypto "from Crypto.PublicKey import RSA" So we need to add python-pycrypto native to recipes * The python-pycrypto recipes come from meta-security (out of AGL): https://layers.openembedded.org/layerindex/recipe/39101/ Change-Id: I64340544c9a23a8e9ef62aca348fc08722d3dcc2 Signed-off-by: Ronan <ronan.lemartret@iot.bzh>
2016-12-02Set rootfs size based on real size of rootfs imageAnton Gerasimov1-2/+18
ROOTFS_SIZE is recomputed for each image type based on total size of rootfs directory. If rootfs directory gets smaller between creation of rootfs image and SD image, it fill result in corrupted SD image. It should not happen in theory, but it happens occasionally for a reason I could not identify. Change-Id: I1c888c179fdcec32c3cacbbce7b2d34ec70bbb17 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-12-01Add wl-shell-emulator.so to weston.ini to porter and QEMU as well.Anton Gerasimov2-2/+4
CES2017 demo depends on it. Change-Id: I9a01d106175fcfaba74195c9c6efe6e8f2bda4a5 Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
2016-11-28weston-raspberrypi.ini: Fix Weston configurationsLeon Anavi1-1/+6
Fix Weston configurations for Raspberry Pi 2/3 and run it in IVI shell. Following these changes start_ALS2016_ivi-shell.sh works again. Bug-AGL: SPEC-268 Change-Id: Ief75dfc078a42aba65161783b2a7beef23115e33 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-11-25Use IVI-shell instead of desktop-shell as default in weston.iniBocklage, Jens3-15/+10
Using IVI-shell as default for following platforms: - QEMU - Renesas - Raspberry Pi The IVI-shell is needed to run the CES 2017 demo. Signed-off-by: Bocklage, Jens <Jens_Bocklage@mentor.com>
2016-11-24Fix file extension from *.bb to *.bbappendKotaro Hashimoto1-0/+0
linux-linaro-qcomlt%.bb was wrong file extension. I modify this file extension from *.bb to *.bbappend. Change-Id: Ib44d0496025d88faf7a34310cc3d208db668ca5a Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
2016-11-23meta-rcar-gen3: autoload mmp modulesYannick Gicquel4-0/+4
Add KERNEL_MODULES_AUTOLOAD directive some to multimedia package drivers. Thus after bootup, multimedia framework is ready to use hw acceleration IP. Change-Id: I43a92fdf2dff1f546e5a532b13203efd4a6b829c Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-22dra7xx-evm: weston: add changes for AGL home screenKarthik Ramanan23-0/+5859
This patch set contains three sets of changes: * Recipes and patches from meta-arago for weston bringup * Additional patches to support ivi-shell for dra7xx-evm * Configuration settings for applications/AGL home screen Change-Id: I925c1babdf2e825c0f68ec1d57107469f3abef09 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-22meta-agl-bsp: More CES 2017 demo hardware support for TI VayuScott Murray3-3/+14
Tweaked the rtl_sdr.cfg fragment for linux-ti-staging to add CONFIG_I2C_MUX, as it is required by the RTL28xx driver Kconfig in newer kernels. As well, added another fragment to linux-ti-staging to enable USB Bluetooth HCI devices so that USB Bluetooth adapters will work on Vayu. Change-Id: Ifd40f25e2159066fea4707a7915ba9b6dee52e0c Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2016-11-21meta-rcar-gen3: add template with hw accelerationYannick Gicquel2-0/+45
this introduce gen3 support with egl & multimedia acceleration. Change-Id: Id816c6ae85e2877a1af9203ef893e1db12db5afc Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-21dra7xx-evm: u-boot: Fix SRCREV + mmc stability fixKarthik Ramanan2-1/+31
The latest u-boot has included some patches that is causing an instability with certain MMC cards This patch fixes the SRCREV to a known commit and includes a stability fix for the MMC Change-Id: I7ba99d36bd713d81409d528e8067e012415b33f0 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-17meta-rcar-gen3: optee-os: build fixupYannick Gicquel2-8/+19
Change-Id: I47dcf04e05ec61eebff20a171df78584c7de70a1 Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-17weston.sh: Set XDG_RUNTIME_DIR to /run/user/0Leon Anavi1-1/+1
Set XDG_RUNTIME_DIR for Raspberry Pi in weston.sh to /run/user/0. Bug-AGL: SPEC-310 Change-Id: I283ee98ae17a54aa3e6a4c8574ab9debe1b21fbb Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-11-17dra7xx-evm: u-boot: Add custom uenv.txtKarthik Ramanan2-3/+15
dra7xx-evm supports multiple LCD panels, to boot the board successfully, the uenv.txt has to specify the correct dtb file. This patch adds the default dtb and specifies one of the LCD panels in it. NOTE: It could happen that the panel that you have is a different panel, in that case you would have to manually edit the same. Change-Id: I0fdbe0ce48ca0654604a5808de684558308582c5 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-16meta-rcar-gen3: gles: support for AGL toolchainYannick Gicquel1-0/+4
As TARGET_VENDOR is defined in AGL, the toolchain has a different name. The gles recipe contains hardcoded toolchain name, this add support to custom one. Change-Id: Ie4e768d0570c6a07f92067e39079e6e063d59451 Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-16Add support for CES 2017 demo hardwareScott Murray16-1/+89
Add kernel config fragments to enable support for the TP-Link TL-W722N USB Wifi adapter on both Turbot and Porter, and RTL2832U DVB USB adapter on Porter. v2 (jsmoeller): Adapt linux-yocto bits and add rpi3 + vayu - moving linux-yocto appends catches all the linux-yocto boards - adding the fragments to the other boards likewise - yet todo: sabre, wandboard v3 (jsmoeller): remove leftover file:// Change-Id: Ic2c3255d9383ccfe8b24d034ef43779d120c5ee1 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-16dra7xx-evm: ti-ipc: get rid of local patchesKarthik Ramanan2-20/+0
The patch that was submitted to meta-agl has been upstreamed. Remove and reuse from meta-ti. Change-Id: I269b40fc29913bc192a4d0417b5f6c1af4458d81 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-14meta-agl-bsp: meta-rcar-gen3: initial integrationYannick Gicquel2-0/+17
Note: optee-os recipe is disable for the moment. Change-Id: I8881fcc3c794b1cbb479b8e7d61bb86688f78bf9 Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
2016-11-14meta-agl-bsp: backport: gstreamer1.0 v1.4.5 recipesYannick Gicquel55-0/+3075
This is a backport from Jethro as meta-rcar-gen3 append on following: - gstreamer1.0-libav_1.4.5 - gstreamer1.0-omx_1.2.0 - gstreamer1.0-plugins-bad_1.4.5 - gstreamer1.0-plugins-good_1.4.5 v2 (jsmoeller): Move into meta-rcar-gen3 subfolder as it only affects that layer. Change-Id: Iefc9a2c10e76c172f1cb1f8d3babf3544828310e Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-14meta-agl-bsp: backport: mesa v10.6.3 recipeYannick Gicquel2-0/+199
This is a backport from Jethro as meta-rcar-gen3 append on this package. v2 (jsmoeller): Move underneath meta-rcar-gen3 as it only affects that layer. Change-Id: I1c9f94346da919530c359b471429fad9b1b2c661 Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-14meta-agl-bsp: backport: linuxptp v1.4 recipeYannick Gicquel2-0/+57
This is a backport from Jethro as meta-rcar-gen3 append on this package. v2 (jsmoeller): move to meta-rcar-gen3 subfolder as it only affects that layer Change-Id: Ic5755342beae2b02a6072d40fc7e8d41596d5b2b Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh> Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2016-11-13dra7xx-evm: switch to different kernelKarthik Ramanan1-0/+11
Also renamed the append file to make it kernel specific. This kernel will enable more automotive specific usecases like radio and other adapter boards that will be required for AGL. Change-Id: I2259724061f8b47f79fa43a5b65d43c8e025fd3a Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-13dra7xx-evm: switch to new u-bootKarthik Ramanan1-0/+5
This u-boot version will enable specific usecases for AGL and in general to support additional peripheral boards Change-Id: Id08dd74e299a2fc7a28df88c4417e94c06a19293 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-13dra7xx-evm: add platform specific GStreamer pluginsKarthik Ramanan4-0/+57
This patch add the GStreamer plugins for hardware acclerated multimedia and video post processing functionality. Change-Id: I4ebed2e183f46f1d7cf1fb47ccec37dc64a026b6 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-13dra7xx-evm: platform specific additions for gst-badKarthik Ramanan2-0/+176
This patch introduces certain allocators and sinks that will use the platform specific components and provide the base functionality for the GStreamer accelerator plugins. Change-Id: Iad16f61eefb8c71933efb9109652aed008939203 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-13dra7xx-evm: add support for multimedia accelerationKarthik Ramanan3-0/+55
TI Jacinto 6 has hardware multimedia acceleration capability. This patch introduces the firmware and IPC components that are needed to control the hardware accelerators. Change-Id: I795c820f9bb87dd77ad227ce7c80f879dd935e54 Signed-off-by: Karthik Ramanan <a0393906@ti.com>
2016-11-11weston: Set XDG_RUNTIME_DIR for fsl-armDennis Field2-0/+21
Without this environment variable, Weston fails to start on Wandboard Bug-AGL: SPEC-318 Change-Id: I42696f45d9a9b78dfeea905d3c5066845056894e Signed-off-by: Dennis Field <dennisf@radiosound.com>
2016-11-11meta-agl-bsp/meta-renesas: weston.ini for RenesesLeon Anavi2-0/+30
Add weston.ini with preconfigured but commented out screen resolutions in the output section. Weston 1.9 with DRM backend on Renesas Porter board is known to be picky about monitors and screen resolutions. This way the developer can quickly switch to another configuration if the default fails on the current monitor. This patch should be considered as a temporary work around until there is a generic solution. Bug-AGL: SPEC-298 Change-Id: I772945a083ef4cab240c49e03c5f0cf1172a6ab2 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2016-11-10oic: Rebase on iotivity maintenance branch for aarch64Philippe Coval1-0/+1
To pick: yocto: Add aarch64 for DragonBoard-410c Reviewed-on: https://gerrit.iotivity.org/gerrit/14185 Forwarded, to meta-oic maintainer Even if meta-oic is not a BSP, meta-agl-bsp will include this recipe's fix everywhere meta-oic is used (ie: meta-agl-demo). Bug-AGL: SPEC-158 Change-Id: Ic2cb1b7ff757118d1b535d91649c361831be5f60 Signed-off-by: Philippe Coval <philippe.coval@osg.samsung.com>