| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Update the templates to use the updated flags and configuration present in
meta-raspberrypi.
The previous template did not properly pull-in the u-boot fragments for the RPI4.
v4: the MACHINE in the AGL template for the RPI4 is now
'raspberrypi4-64' as in upstream.
CI will get support-patches through releng-scripts.
Bug-AGL: SPEC-3368
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: Ia2acb54516464d433c64adfc7ba832ccfdf899c3
|
|
Add imx8mqevk-viv machine template for i.MX8MQ EVK which uses the
default Vivante driver configuration in meta-freescale with the
new community linux-fslc-imx kernel. The following additional changes
have been made to support this:
- A linux-fslc-imx bbappend has been added to pull in the AGL kernel
configuration, and a imx8mq-evkb config fragment has been added to
enable the required Wifi driver for the updated EVKB board.
- Stale qtbase and weston-init bbappends/patches have been removed
from meta-agl-bsp/meta-freescale-layer.
- The meta-agl-profile-graphical Weston 8.0.0 bbappend has been
renamed to 8.0.% so the wildcard will apply it to meta-freescale's
weston_8.0.0.imx recipe.
Known issues:
- The required PipeWire configuration for the onboard audio needs
further investigation.
Bug-AGL: SPEC-3258
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I4ea5437ef0ea8bedb9dd2157f2822ff25ee56cff
|
|
Some of required kernel configs to use SystemTap are not enabled by
default. It is nessesary to rebuld and replace kernei before using it.
This commit will avoid it.
v2: Make the change conditional to 'agl-devel' and not apply in production.
Bug-AGL: SPEC-3360
Signed-off-by: Kenji Hosokawa <khosokawa@jp.adit-jv.com>
Change-Id: Ida74b9ee9de0be3c06683e3a04ad424d5ae3e9e6
|
|
Copy extra hardware support kernel configuration fragments used with
meta-intel for intel-corei7-64 machine over to also use them with
qemux86-64, and add apparently now required LPSS configuration
options to x86-upsquared.cfg to fix serial console support.
Bug-AGL: SPEC-3353
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Iabcd7701f6967c877b295c09c1d328d69c4d0deb
|
|
* PREFERRED_PROVIDER_virtual/libomxil is the standart way to
define dependency on gstreamer1.0-omx recipes.
Bug-AGL: SPEC-3328
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I061c0142f56ee4348809876c08b818944514bce3
|
|
Changes:
- Rename weston bbappend for weston 8.0.0 in dunfell.
- meta-ti now requires the meta-arm layer as the upstream source of
the optee recipe, so add it to bblayers.conf in the machine
templates. This is dependent on a manifest update to add meta-arm.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ib6b40d3aa1d2b04239b6e5343eb818f3f49af8ef
|
|
meta-freescale has removed the linux-fslc-imx recipe in its master
and dunfell branches, so remove the local bbappend to avoid parse
errors. That kernel is currently not used by any machine template
in-tree, so there should be no impact.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Iea9a5ae11ef90f5ce217ac5b379b133c6d0948a8
|
|
Changes:
- Remove Mesa version over-ride, since dunfell has newer version.
- Remove bcm2835-bootfiles SRCREV updates since dunfell has newer
versions of the files.
- Remove kernel SRCREV update in linux-raspberrypi_4.19.bbappend
since dunfell has newer version, and add include of new
linux-4.19-agl.inc to keep getting CAN qdisc patch.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I7f7a9b454de9eb4fae7075b30ee89b3aec4e6a43
|
|
Changes:
- Rework CAN qdisc patch application, as it is not required for 5.4
or newer kernels, this includes adding a linux-agl-4.19.inc for
BSPs using 4.19.
- Remove linux-agl-4.9.inc and associated patches, as no BSP uses 4.9
at this point.
- Remove PREFERRED_VERSION_linux-yocto from poky-agl.conf so the
default 5.4 linux-yocto kernel will be picked up.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I9c0eb431661641bd17320a00cdf1ed4e717a9754
|
|
Remove local vboxguestdrivers recipe as a newer version is available
in meta-oe in dunfell.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I3a7ff17a4bcae2f38a4876aeeed7b5880636ac5b
|
|
For the upgrade to YP dunfell/3.1 we need to update the layer
compatibility.
Bug-AGL: SPEC-3302
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ieb1ac9ef1f48f077c9cd312c4ac295ae1cc062b0
|
|
The cleanup done in commit de577de9 ("Consolidation of
AGL_DEFAULT_IMAGE_FSTYPES after review of machine use") inadvertently
removed the wic.{xz,bmap} additions that were done in commit cdbe6578
("Extend qemux86-64 images to support real hardware"). Add them to
AGL_EXTRA_IMAGE_FSTYPES for qemux86-64 so that they will be available
for use on physical hardware again.
Bug-AGL: SPEC-2931
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I7ea9cc195add6d015390c7b2b359234f0bfeaaea
|
|
We re-use the OpenEmbedded / Yocto Project style to
declare the licenses more prominently in the top level folders.
LICENSE is derived from poky's LICENSE file.
Bug-AGL: SPEC-3295
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I059b5b42beb0d422ad2e679e958588240b5d8989
|
|
To save space and download bandwith, we use the compressed format in CI.
Also adapt the inclusion of the guest drivers to the compressed image.
Bug-AGL: SPEC-2771
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Change-Id: I140fb31954be5ec2b46596a9816087d3fb670416
|
|
After reviewing what all machines actually specify as 'extra', the conclusion was
that the actual 'default' is 'wic.xz' .
Consequently make this the new default and remove it from the board configs.
v2: add ext4/ext4.xz for netboot feature
Bug-AGL: SPEC-2771
Change-Id: I082f87a07dcacb962d10efd90ba2476f87896302
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add new machines to build with AGL:
- h3-salvator-x-nogfx
- h3-salvator-x
- m3-salvator-x-nogfx
- m3-salvator-x
Bug-AGL: SPEC-3169
Change-Id: I0cfa838ad40f8afda01aeb693fbf595bad8b4730
Signed-off-by: Duy Dang <duy.dang.yw@renesas.com>
|
|
Backported upstream patchset to fix CAN failures with SocketCAN
* net: sch_generic: Use pfifo_fast as fallback scheduler for CAN hardware
Additional patchset for 4.14 kernels to bring in needed if_afp.h header
Bug-AGL: SPEC-3171
Change-Id: I1ddb75d1aca64861cfc52f1df4ff810bd0367ab9
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Xen is enabled for the R-Car M3 ulcb board only. Note that it is
optional to run Xen, the non-Xen binaries are still there and can be
run exactly as before.
Bug-AGL: SPEC-2912
Change-Id: Ica57afd4d067de4ed752c0c46a04e11584aeec41
Signed-off-by: Jérémy Fanguède <j.fanguede@virtualopensystems.com>
|
|
Provide a specific version of the device tree (appended with -xen) to
run with Xen. Only the R-Car m3ulcb board is supported and tested so
far.
Add also the Xen block device backend support in the kernel, to be
able to run block device based DomU.
From U-Boot, Xen and Linux Dom0 can be run as follows (assuming
binaries are in sdcard first partition):
> setenv bootargs
> fatload mmc 0:1 0x48080000 xen-m3ulcb.uImage
> fatload mmc 0:1 0x48000000 r8a7796-m3ulcb-xen.dtb
> fatload mmc 0:1 0x7a000000 Image-m3ulcb.bin
> bootm 0x48080000 - 0x48000000
The Linux Dom0 bootargs are hardcoded in the device tree, the rootfs
is expected to be on /dev/mmcblk1p2
Bug-AGL: SPEC-2912
Change-Id: Ia86e0789650eaf79d13691cf4f53755c8cb8f06c
Signed-off-by: Jérémy Fanguède <j.fanguede@virtualopensystems.com>
|
|
The drivers will also be needed for the html5 image.
Move them to a common layer.
Bug-AGL: SPEC-3170
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I9bcfc3b7569b3108442df4e64ec61da0054e4a44
|
|
Provide Xen support for Arm64 boards, tested with the R-Car M3 ulcb
board. Xen v4.13.0 stable version is compiled.
A new binary is deployed, named "xen-${MACHINE}.uImage" that can be loaded
and run by U-Boot.
v2: rework to split u-boot mkimage part a separate recipe so we can
keep the diff of the xen recipe at a minimum.
Bug-AGL: SPEC-2912
Change-Id: I68d2af74d31ee310686645c8a5ae11b0201448b2
Signed-off-by: Jérémy Fanguède <j.fanguede@virtualopensystems.com>
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Use different dtb and dtbo files for Raspberry Pi 4 when agl-sota
is enabled. This modification is required for successfully
building a kernel because in AGL machine raspberrypi4 is for
64-bit image and in class sota_raspberrypi layer meta-updater
the same machine name is targeting 32-bit image.
Bug-AGL: SPEC-3130
Change-Id: I5fd4bccfe605fea4e14499183279032a8bf0562e
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
* agl/next:
meta-agl-bsp: Add CONFIG_LSM workaround for 5.1+ kernels
meta-agl-profile-cluster-qt5: disable qtbase patches
zeus updates for dragonboard-410c
meta-security: activates dbus-cynagora
recipes-graphics/wayland/weston: Expose weston_output_damage()
meta-agl-profile-core: tweak udisks2 configuration for AGL
meta-agl-bsp/meta-arago: update weston bbappend
[RCAR] Update rcar driver weston 7 bsp 3.21.0
[RCAR] Update rcar driver weston 7 bsp 3.21.0
[RCAR] Split ADSP path for ulcb and ulcb-kf
Fix nss-localuser post install
meta-agl-bsp: meta-raspberrypi: handle zeus upgrade
meta-agl-profile-core: add patch for systemd-udevd SECLABEL crash
meta-security: disable dbus-cynara patches
meta-agl-bsp: handle ptest-runner upgrade
meta-agl-distro: Add inc file for next branch over-rides
meta-agl-distro: BBMASK problematic upstream meta-security bbappend
meta-agl-distro: prefer linux-yocto 4.19 LTS kernel
meta-agl-profile-graphical-qt5: enable qt5location services
meta-agl-profile-core: update most recipe
meta-agl-profile-core: update neardal recipe
Update base local.conf.sample
meta-agl-profile-graphical: don't always build agl-compositor
meta-agl-profile-graphical: update weston and weston-init
meta-agl-profile-graphical: update wayland-ivi-extension for weston 7.0.0
meta-agl-distro: add polkit to DISTRO_FEATURES
meta-agl-profile-core: update fontconfig bbappend
meta-agl-profile-core: switch to udisks2
meta-security: handle systemd upgrade
meta-agl-profile-graphical-qt5: handle qtwayland upgrade
meta-agl-profile-core: handle freetype upgrade
meta-agl-bsp meta-agl-profile-core: upgrade to opencv 4.x
meta-agl-profile-core: update rtl-sdr recipe for zeus
meta-security meta-app-framework: handle xmlsec1 upgrade
meta-agl-profile-graphical: upgrade to gstreamer 1.16
meta-agl-profile-core: remove libmicrohttpd backport
meta-agl-profile-core: remove backported curl and nghttp2 recipes
meta-agl-profile-core: remove libnfc recipe
meta-agl-profile-core: remove connman backport
meta-agl-profile-graphical: remove weston 5.0.0 patches
meta-agl-profile-core: remove old glibc patch
meta-agl-bsp/meta-intel: remove linux-firmware_git.bbappend
meta-agl-bsp: remove weston and wayland-protocols backports
meta-app-framework: remove libzip recipe
meta-security: remove keyutils recipe
Declare layer compatibility with zeus
Change-Id: Ie8ee1e37958279e7cf2d503c54ffacb46ba0c31c
|
|
Add explicit clearing of CONFIG_LSM before running "make oldconfig"
in the do_configure_append added by linux-agl.inc. This ensures that
the derived value of CONFIG_LSM will reflect configuration changes
done by the merged AGL provided fragments, i.e. SMACK being enabled.
Without it, kernel recipes that are not based on linux-yocto.bbclass
or have their own fragment handling done via prepend will end up with
an incorrect value of CONFIG_LSM which effectively disables SMACK.
Examples include the linux-imx or linux-fslc kernels used by NXP.
Bug-AGL: SPEC-2932
Change-Id: Id99906e3de75128ebc54866d43d89d3a24bb1cf2
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Changes:
- Update BBMASK definition in template to avoid new warning.
- Rename linux-linaro-qcomlt bbappend to use a wildcard to cover both
the new 5.4 kernel in meta-qcom and still the older 4.x kernels in
that BSP that a user might configure instead.
Bug-AGL: SPEC-2932
Change-Id: I8a735a38409822e7069cc84bc2a42c06d351a278
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Because the device tree has been renamed,
we must rename it accordingly.
Bug-AGL: SPEC-3097
Change-Id: Ic9ceee7df53880fa24f172c7c3a2ab76500e5a99
Signed-off-by: Minori Yasumura <minori@witz-inc.co.jp>
|
|
- For SOTA we need to use ${nonarch_base_libdir} instead of /lib
Change-Id: I84fbbe44abd9f3a3752b555791c8e1e06c755a9b
Bug-AGL: SPEC-3097
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Update weston bbappend orginally from meta-arago/meta-arago-distro to
work with zeus. The new weston_7.0.0.bbappend is based on the version
from meta-arago's zeus branch as of commit 9646a5e, with some edits to
remove unneeded patches after discussion with the meta-ti / meta-arago
maintainer.
Bug-AGL: SPEC-2932
Change-Id: Ia0a719b1fc7ed2f31c40a2b491cfc5e4b0f71cd0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
- update new rcar driver (Linux_Drivers-weston7 20191021).
Bug-AGL: SPEC-2932
Change-Id: I231301ac5096715e52f2fbb2e35c159a323f8b71
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Change-Id: I052e4d0a27c1e0f6e6ab74c518d67dbf72e39b15
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
- If we want to build AGL for ulcb board without
the meta-rcar (kingficher board support), we need to
split the patch.
Change-Id: I145887d4619a7132e46f98f30e1fc0dd3de6b29a
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Remove backported u-boot, mesa, userland, and linux-raspberrypi recipes,
tweaking local bbappends as required. Note that the linux-raspberrypi
bump to 4.19.80 for rpi4 dual screen support is now handled via bbappend.
Bug-AGL: SPEC-2932
Change-Id: I019633e86a921b9444bc718ac0557b04f25b27f4
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Rename ptest-runner to handle upgrade from 2.2 to 2.3.2, and update
local LAVA support patch.
Bug-AGL: SPEC-2932
Change-Id: Ia9edf303de689c42bad80a04522117c27e0977c2
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Rename meta-agl-bsp and meta-agl-profile-core bbappends to handle
opencv upgrade from 3.x to 4.x, and update patch in meta-agl-bsp.
Bug-AGL: SPEC-2932
Change-Id: I200fed501d0d09cb2ae6953fe95e3dafcc383457
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Remove empty meta-intel specific linux_firmware_git.bbappend, as there
is no _git version of the recipe in zeus for it to apply to.
Bug-AGL: SPEC-2932
Change-Id: I7675d024a069e51b8c8b6b8ba34579cbff629158
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Remove weston 6.0.0 and wayland-protocols 1.17 backports, as they are
no longer required. oe-core now has weston 7.0.0 and wayland-protocols
1.18.
Bug-AGL: SPEC-2932
Change-Id: I351c44616a0f47b128e10371bf05f16b0bfe054f
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
For the uprev to YP 3.0 zeus we need to update the layer compatibility.
Change-Id: Ib762915305588c39400c3c8343152b4ecbfa4556
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
* Build wic images for qemux86-64 which can be written to a USB stick or
SD card.
* Support both virtual and physical displays for all qemu targets.
* Use a wks file which works on both virtual and physical machines. EFI
is now required to boot the VMDK image.
* Drop inclusion of `microcode.cpio` in the boot partition in the wic
file `systemd-intel-corei7-64-bootdisk.wks`. This file is not
available for qemux86-64 images and is not strictly necessary.
Bug-AGL: SPEC-2931
Change-Id: Ib3982906e52d3a964a921c9a2234cab697fe0551
Signed-off-by: Paul Barker <pbarker@konsulko.com>
|
|
These changes allow images built for the intel-corei7-64 machine to be
booted under qemu (by using the normal `runqemu` command) and vmware or
virtualbox after a build. Functionality on real hardware should not be
compromised.
Bug-AGL: SPEC-2931
Change-Id: If25782bf59e145cab32a4c9a0e39b599106ce7cc
Signed-off-by: Paul Barker <pbarker@konsulko.com>
|
|
Although the rpi-config_git.bbappend enable ENABLE_UART_raspberrypi4 =
"1", it seems make no effect.
This patch is temporary solution, which can do some help to debug pi 4
boot issue.
Bug-AGL: SPEC-2995
Change-Id: I0b634c4d8df576884b939ea259d4f8b7ca5330d7
Signed-off-by: Li Xiaoming <lixm.fnst@cn.fujitsu.com>
|
|
* The libgbm recipe has disappeared. "virtual/libgbm" is now provided by
ti-sgx-ddk-um.
* Update ti-sgx-ddk-km and adapt the AGL toolchain support to fit with
the upstream Makefile changes.
Change-Id: I2744868b466306cf2c1cb458a6889ab2043f9421
Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
|
|
Enable Bluetooth for 64-bit AGL images for Raspberry Pi through
recipe pi-bluetooth. It provides a script that starts
automatically and properly configures BT-HCI.
Bug-AGL: SPEC-2936
Change-Id: I01cd5ea446bfe5f4182284c5e88984ee054fe62f
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Switch from 32-bit to 64-bit AGL image for Raspberry Pi 4.
Machine configuration has been modified according to the existing
configurations from meta-raspberrypi branches master and zeus.
When AGL moves to a newer release of the Yocto project and the BSP
these configurations can be removed from meta-agl.
Bug-AGL: SPEC-2936
Change-Id: Iddc3f75be179797e7d56f6806ec6ba52b080d766
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
v2:
add PACKAGE_ARCH = "${MACHINE_ARCH}"
Bug-AGL: SPEC-2808
Change-Id: Id1587761c9be10a55ea18a938b74b39c512b63e2
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
When the ZIP files are already copied, it avoids to
reinstall the proprietary drivers.
This change is intended to facilitate workflows were
aglsetup is sparsely/rarely used.
Change-Id: I25275473d52ee7c811fdcaa50871bc1d385e868d
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
Update graphics kernel side driver to 20191021.
Bug-AGL: SPEC-2784
Change-Id: Ibce4e7ee5fe00d9c37e49b826bd62e39129f91a1
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
and also add the rpi4.
Bug-AGL: SPEC-2465
Bug-AGL: SPEC-2656
.
Change-Id: Ied2dce914ecc539c7634214b571508d371116235
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Swith to firmware KMS with appropriate Linux kernel and Mesa
version to support both HDMI and the official 7" Raspberry Pi
touch screen display on Raspberry Pi 3B/B+ and 4. Device tree
changes are not required for firmware KMS.
Bug-AGL: SPEC-2465
Change-Id: I5f8f62c0151b7eb79ab1f96419d9c62469a1554e
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Update the firmware to support Linux kernel 4.19.80 for
Raspberry Pi 3 B/B+ and 4. This way both the HDMI and the
official 7" Raspberry Pi touch screen display are supported.
Bug-AGL: SPEC-2465
Change-Id: Idb028b8abca5a44da2783def8af2c28f04de66d2
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Update Linux kernel for Raspberry Pi to 4.19.80. This version
allows to run firmware KMS to support output through HDMI and
DSI for the official 7" Raspberry Pi touch screen display.
Bug-AGL: SPEC-2465
Change-Id: Ie854f8609196f986a1f9067da1010fb2e510e7c4
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
Jan-Simon Möller
Scott Murray
Kenji Hosokawa
Ronan Le Martret
Duy Dang
Matt Ranostay
Jérémy Fanguède
Leon Anavi
Minori Yasumura
Paul Barker
Li Xiaoming
Paul Barker
Harunobu Kurokawa
José Bollo