aboutsummaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp
AgeCommit message (Collapse)AuthorFilesLines
2018-12-20kernel/4a: support more than 8 audio cardsStephane Desneux1-0/+2
When using Kingfisher + M3ULCB + MOST network devices, it's possible to reach the max number of statically allocated soundcards. This patch enables CONFIG_SND_DYNAMIC_MINORS which allows to declare more than 8 soundcards. Change-Id: Ibe0f75e00c343d7adfcdae0661e893fb39fc4169 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-12-20Support external RTCs for boards without itJan-Simon Möller2-1/+13
We add the rtc driver as module so we can attach e.g. http://wiki.seeedstudio.com/Grove-RTC/ Add the necessary drivers as module. Change-Id: Iacb8247f9e2edccabe854284672353a847a27e0d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-12-18linux-renesas: Add smack patches to R-CarJosé Bollo1-0/+3
The patch for CGROUP2 is important for running without capabilities. Bug-AGL: SPEC-2006 Bug-AGL: SPEC-1016 Change-Id: I0dfec85bdc66b220e20776501522e71579e6a742 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-12-18linux-agl-4.14: Backport of Smack patch for cgroup2José Bollo2-0/+41
This patch allows to correctly handle the cgroup filesystem based on CGROUP2. The patch is made available through the file linux-agl-4.14.inc Bug-AGL: SPEC-1016 Bug-AGL: SPEC-2006 Change-Id: I2dba8bf0341d699c66a098c18fcb22a65b930e58 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-12-18linux-agl-4.14: Backport of Smack patch for keysJosé Bollo2-0/+118
This add a patch that allows to handles keys with keyctl when Smack is active. The patch is not directly enabled but is made available in the file linux-agl-4.14.inc that can be included. Change-Id: I6ad74b1119190e093eaa5878c55cd233b181346f Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-12-17Remove 4.9 patchqueue for new 4.14 kernel in meta-tiJan-Simon Möller1-1/+0
We update meta-ti to 4.14, thus we do no longer need the 4.9 patch queue of smack. Change-Id: I20d89c75029f29b0e6827979e70e85614d7a2e40 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-12-14Remove patch in newer ti-staging kernelJan-Simon Möller1-1/+0
The pending BSP update already has this patch applied (can be reverse-applied). Thus remove it. Change-Id: If3172270f40b21bd448c7113c7ab6f2a8f82023c Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-12-07Fix missing ivi-id-agentTadao Tanikawa2-3/+4
The ivi-id-agent was missing because its configuration wasn't updated although it is changed by the following patch of wayland-ivi-extension in meta-agl-demo. 22c9537 wayland-ivi-extension: Added ivi-id-agent by mtey Change-Id: I6faf18735cc0a2b7caea97a77fab3e11eaedcc49 Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2018-12-06weston-ini-conf: update gst-record logicScott Murray2-9/+5
The logic to handle the "virtual-output" and "gst-record" DISTRO_FEATURES seems to be unfinished, this update replaces the "virtual-output" usage with just "gst-record", as the former does not seem to exist in the AGL codebase. The virtualoutput.cfg file has been updated with the arguments from the virtual output section in the replacement .ini file from the mapviewer-demo recipe in meta-agl-demo, but some further investigation is required into tweaking things to produce a final .ini file that matches that one. These changes are a first step to getting to that end goal. Change-Id: Ib99e0717ed1e66016c6e936a3c398addcb6adfb7 Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 262b016588cb153520362cf0aed3715e43d86672)
2018-11-30Enable agl-sota for h3ulcbAnton Gerasimov8-6/+40
Change-Id: I3c2d0df6e3afd4aa0671261f7d143ac15d88a836 Signed-off-by: Anton Gerasimov <tossel@gmail.com>
2018-11-29create-combined-dtb: Add dependency on virtual/kernelLeon Anavi1-0/+2
Add a dependency to virtual/kernel:do_deploy to ensure that the dtb and dtbo files needed for task compile will be present. Bug-AGL: SPEC-1775 Change-Id: I2d5872fe6bbd9a40c3f4185eea0efc10e6100b8b Reported-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-29agl_raspberrypi3.inc: Add create-combined-dtbLeon Anavi1-1/+1
Include the recently added Yocto/OE recipe create-combined-dtb for combining dtb and dtbo to Raspberry Pi builds. Bug-AGL: SPEC-1775 Change-Id: I4bb91d9e5d7f6f5b8fe6a9371d85b93aa26bff1e Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-22meta-agl-bsp: ptest-runner: v2.2 and LAVA supportKevin Hilman8-0/+580
Upgrade ptest-runner to v2.2 (first 6 patches), and add the WIP support for LAVA signal (patch 7). From branch: https://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/log/?h=timo/lava-ptest-runner2 Commit: https://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/commit/?h=timo/lava-ptest-runner2&id=11b29ce444610a07067a89b38e9e85c2162bbf67 Change-Id: Ic4ee5e3a9ab796fe7ccd1810b31e582370f99a25 Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-22create-combined-dtb: Combine dtb and dtboLeon Anavi1-0/+33
Combine a number of device tree overlays to a base blob with a specified filename in the deploydir only. This feature is required only for netboot therefore the files are not included in the image. Bug-AGL: SPEC-1775 Change-Id: I16ff043ee0d44d4151e1fb2ba714bd1542854bd8 Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-22fdtoverlay: Provide fdtoverlay-nativeLeon Anavi3-0/+62
Add a recipe for building fdtoverlay native from the source code of newer dtc without upgrading the version of the main dtc recipe. Bug-AGL: SPEC-1775 Change-Id: I251b22e0ecd4d2de088340daf19b602670668d55 Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-15[RCAR][upstream] remove dts patch for SDIO frequencyHarunobu Kurokawa1-0/+4
Bug-AGL: SPEC-1945 Latest meta-rcar update SDIO frequency for TI's WLAN driver. However, in M3 case, the this patch raise ti/wlcore driver WANING. [ 107.009706] ------------[ cut here ]------------ [ 107.014342] WARNING: CPU: 0 PID: 4224 at /kernel-source//drivers/net/wireless/ti/wlcore/sdio.c:145 wl12xx_sdio_raw_write+0xb0/0x160 [wlcore_sdio] [ 107.027375] Modules linked in: rfcomm 8021q garp stp mrp llc can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce btwilink bluetooth ecdh_generic wlcore_sdio rcar_can st_drv rfkill can_dev vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) sllin(O) pvrsrvkm(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6 [ 107.062537] CPU: 0 PID: 4224 Comm: wpa_supplicant Tainted: G O 4.14.35-yocto-standard #1 [ 107.071749] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT) [ 107.079138] task: ffff8005fc610e00 task.stack: ffff000020bc8000 [ 107.085054] PC is at wl12xx_sdio_raw_write+0xb0/0x160 [wlcore_sdio] [ 107.091316] LR is at wl12xx_sdio_raw_write+0x7c/0x160 [wlcore_sdio] <snip> [ 107.467808] ---[ end trace 0140d637a5afd50b ]--- [ 107.472613] wl1271_sdio mmc2:0001:2: sdio write failed (-84) [ 107.478340] ------------[ cut here ]------------ [ 107.483008] WARNING: CPU: 0 PID: 4224 at /kernel-source//drivers/net/wireless/ti/wlcore/main.c:796 wl12xx_queue_recovery_work.part.26+0x58/0x60 [wlcore] [ 107.496648] Modules linked in: rfcomm 8021q garp stp mrp llc can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce btwilink bluetooth ecdh_generic wlcore_sdio rcar_can st_drv rfkill can_dev vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) sllin(O) pvrsrvkm(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6 [ 107.531806] CPU: 0 PID: 4224 Comm: wpa_supplicant Tainted: G W O 4.14.35-yocto-standard #1 [ 107.541018] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT) [ 107.548406] task: ffff8005fc610e00 task.stack: ffff000020bc8000 [ 107.554363] PC is at wl12xx_queue_recovery_work.part.26+0x58/0x60 [wlcore] [ 107.561265] LR is at wl12xx_queue_recovery_work+0x1c/0x28 [wlcore] Change-Id: I6f15251e6997f52892efd118e8941af5930c5ca9 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-11-14dragonboard-410c: change init sequence of the qcom kernel moduleYuya Ono3-1/+34
Since db410c's DSP is enabled from the rocko branch, an error occurs at boot time. This patch is workaround by change init sequence of kernel module on booted with reference to the following discussion. (https://lkml.org/lkml/2018/10/31/440) Change-Id: I5e1b94a7b17889610b3beecccd3e99f4bc445226 Signed-off-by: Yuya Ono <Ono.Yuya@ap.MitsubishiElectric.co.jp>
2018-11-07Latest meta-altera supports wic IMAGE_FSTYPEJan-Simon Möller1-1/+1
In preparation of the layer uprev, fix the IMAGE_FSTYPE. Change-Id: Ic4c78fb27b0676383143b943d97a511b960e01b1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-10-31gpsd-kingfisher-conf: fix PREFERRED_RPROVIDER issueStephane Desneux1-1/+1
virtual/gpsd-conf is a runtime dependency in packagegroup-agl-core-navigation. So, PREFERRED_RPROVIDER must be used in place of PREFERRED_PROVIDER Bug-AGL: SPEC-1861 Change-Id: I15b915c2e7a1410000f7527b13f3206242778bc0 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-10-19meta-agl-bsp: kernel: fix can-bus.cfgKevin Hilman1-1/+0
This config fragment for CAN bus had both an option for enabling as a module: CONFIG_CAN_C_CAN=m and for disabling: # CONFIG_CAN_C_CAN is not set Since the disable came last, disable wins. This caused the C_CAN driver and the C_CAN_PLATFORM driver (used by the TI dra7-evm) to be disabled in the kernel. To fix, remove the option to disable. Change-Id: I5be0cee161318cdfe7deb9c5e9c9f15d79cda7ac Fixes: d870883e7b29d212dc3e2a0e6158d837d4356c6a Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-10-19rcar: gstreamer: Update vspfilter device files when using IMR devicesDamian Hobson-Garcia3-0/+7
The meta-rcar-gen3-adas layer, active on m3ulcb and h3ulcb boards, enables the Renesas IMR device, which takes the first few /dev/videoX device file names, shifting the names of all of the other /dev/video devices. This patch updates the vspfilter configuration files to reflect the change. Change-Id: I326d3f5bb295f813e58d2318310cf86ad52744b3 Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
2018-10-15Add dummy iiodevice support for testFrederic Marec2-0/+29
Add new fragment iiodevice.cfg to enable dummy devices For iiodevices test Change-Id: I9f635334aec2f9cd675b522b86cdfa3ad8168f07 Signed-off-by: Frederic Marec <frederic.marec@iot.bzh>
2018-10-12Clean-up of wayland-ivi-extension_1.13.0 related legacy stuffMichael Teyfel1-5/+0
Since the agl demo is now using wayland-ivi-extension v2.0.2 everything related to v1.13.0 should be removed. That means all bitbake recipes and also the used patch files. Change-Id: I326c8e13c6084ec2135d6f75d64db260d347491e Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
2018-10-12[RCAR] ADSP enable and add sound hardware abstraction in DTRonan Le Martret2-0/+126
The ADSP on Renesas SoCs required a reserved memory area to become enabled, and this needs to be done manually. This patch adds sound hardware abstraction information for the m3ulcb and m3ulcb-kf (kingfisher) device trees. This is helpful on-board the ADSP for dynamically determining sound hardware at runtime, allowing single binaries to be used between the two boards. Future work will incorporate the h3ulcb and Salvator boards into the abstraction. Bug-AGL: SPEC-1227 Bug-AGL: SPEC-1424 Bug-AGL: SPEC-1571 Change-Id: I78edc5854a95520276bdcd9fd9766a120d2c04d7 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Mark Farrugia <mark.farrugia@fiberdyne.com.au> Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-12[RCAR] Enable Linux-based hypervisor execution in AGLRonan Le Martret2-0/+33
The upstream version of AGL boots Linux in EL1. This mode is not privileged enough to put in place the correct configuration of an hypervisor (e.g., KVM). This patch leverages the ATF rcar platform configuration variables to boot the Linux kernel in EL2, instead of EL1, allowing Linux-based hypervisors such as KVM to configure all the necessary stubs to properly run virtual machines. This patch has been successfully tested with ATF, KVM and AGL rootfs on the Renesas R-Car M3. Changelog: - Added arm-trusted-firmware patch, which makes this work easy to be tested by the community - This patch version does not contain Linux kernel modifications. In fact, these resulted not necessary with the proposed ATF patch and a recent kernel (higher than 4.6) Bug-AGL: SPEC-497 Bug-AGL: SPEC-1571 Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com> Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I8d20e36a09be1dba35b10193643ea00e4f388e95 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-12[RCAR] Update RCAR BSP to 3.9Ronan Le Martret1-2/+2
Bug-AGL: SPEC-1571 Change-Id: Ieefd423b79faa220531a887ff167227044ab6064 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-12[RCAR] Change RENESAS_DATADIR valueRonan Le Martret1-0/+2
* AGL doesn't use /usr/local for system files. All the Renesas libraries and binaries will be installed in /usr instead of /usr/local. Bug-AGL: SPEC-1571 Change-Id: Ibc40df5d492517773bf89e4e0f117a02d22d90cd Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-08Mutualizes code for ulcb card family conf fileRonan Le Martret5-106/+52
Remove duplicate code between ulcb card configuration card. Since more an more ulcb card and extention, it becomes difficult to maintain the conf file of the ulcb family. Change-Id: Id5648f4e75c464875d3b175c769e1fdd7f4312f5 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-05[RCAR] Fix ti-bt package name and revisionRonan Le Martret1-0/+3
* ti-bt needs to have a correct PN and PR to be compliant with dnf and so rpm. Bug-AGL: SPEC-920 Change-Id: I1b83ce54340922a23a6f0de5873e48699c2e1101 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-09-29weston-ini-conf.bbappend: Set 720p for Raspberry PiLeon Anavi2-0/+11
Reduce the screen resolution for Raspberry Pi from Full HD to HD Ready (1280x720) to reduce the memory consumption and improve the behaviour of the whole system. This change is applied only for HDMI display on Raspberry Pi due to the limited hardware resources. Bug-AGL: SPEC-1745 Change-Id: Id2fb571b0822f8166086f5ad6a7fcf8ea25c933a Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-20linux-firmware_%.bbappend: Avoid rpi file duplicationLeon Anavi1-0/+5
In releases based on Yocto/OE Rocko firmware files for bcm43430 and bcm43455 are provided by linux-firmware-raspbian. This fix avoids duplication of firmware files for Raspberry Pi 3 Model B and B+ while building agl-demo-platform-crosssdk. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ic9e918f4ffd915b148530bb8e6bf9a6dc6a61c02 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-18agl_raspberrypi3.inc: WiFi on Raspberry Pi 3 B & B+Leon Anavi5-119/+1
Use linux-firmware-raspbian packages for bcm43430 and bcm43455. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ib634ee3351fa91d8d1704656f4a40d1b40cd05e3 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-13Uprev the nogfx machine include to the same stateJan-Simon Möller1-0/+3
as the ordinary m3 build. Change-Id: If07a26f1cb253b9863ea658e6cd122450f03a38b Bug-AGL: SPEC-1640 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-31meta-agl-bsp: meta-ti: amx3-cm3: Add a fix for security_flags.incTom Rini1-0/+3
The way that the PM firmware for these devices is built takes very specific steps to only get the cross-compiler provided by OE and almost nothing else. Unfortunately when we build with the security_flags.inc file in our distro this changes some of the default behavior of the compiler and in turn we need to make sure to disable this and go back to the default behavior. Change-Id: I1ab8e20f77d7ab6a3c786437e9a9422b24f0e159 Bug-AGL: SPEC-1341 Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-23[Work-around] Update recipe for ImageMagick to avoid bitbake errorTadao Tanikawa1-7/+4
At www.imagemagick.org/download, tarball archives of old patchsets are deleted when a new patchset is created. This causes error when do_fetch(). Offical source repository is in github, so SRC_URI can be set to pull from there. Unfortunately, github repository has tags only after 6.9.5-4. Therefore, updated to the latest stable, 6.9.10-10. For meta-agl/meta-agl-demo, ImageMagick is not mandatory component, but optee inside Renesas BSP requires it (and python-wand). Upstream optee already remove these dependency, so this is just work-around until meta-renesas-rcar-gen3 will be updated. Change-Id: I1767e2d7588a35d75009843312c484d3d63553ae Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2018-08-16Add machine templates for qemuarm and qemuarm64Jan-Simon Möller6-1/+67
This changeset adds the necessary tepmlates to build the qemu targets for ARM 32bit and 64bit. The MACHINE names are 'qemuarm' and 'qemuarm64'. As the compiler flags for qemuarm in Yocto are using the equivalent of armv5te, we need to ship our own machine/qemuarm.conf with our default tuning for armv7-a (YP name armv7ve), and overrides to build a v7 kernel and use a v7 capable QEMU machine. For qemuarm64, some additional kernel configuration is enabled to allow building and loading of the MOST drivers. Bug-AGL: SPEC-756 Change-Id: I0a688a1d61a75f1287902fc2733a8a54b0485a34 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com>
2018-08-15Revert "[rcar-gen3] Disable ipv6"Ronan Le Martret2-7/+2
Bug-AGL: SPEC-490 This reverts commit d88997d1d16897abb83a161c215cbec25d9b5e0f. Change-Id: I7c7a989fb1bf1df1de3c0557792ea4b013fec709 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-08-14linux-firmware: Enable WiFi for Raspberry Pi 3 B+Leon Anavi4-0/+118
Add binary blobs for brcmfmac43455 to enable WiFi for the new Raspberry Pi 3 Model 3 B+. At the moment meta-raspberrypi provides this for latest releases but not for Rocko. This fix should remain in meta-agl until AGL moves to sumo or until we backport the required changes to meta-raspberrypi branch rocko. Bug-AGL: SPEC-1652 Change-Id: I644938ac3799b0e831f022fff9b2bc85aa8fd27c Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-08-14[RCAR] Update URL of R-Car's Evaluation SoftwareRonan Le Martret1-11/+11
New Link: * https://www.renesas.com/us/en/solutions/automotive/rcar-download/rcar-demoboard-2.html Change-Id: I4451bbb8ff151c0ab5af0163e667a170e2a078cb Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-08-08weston.ini: set proper configuration to panel-positionHarunobu Kurokawa1-1/+1
"panel-location" configuration is old. The current weston uses panel-position. Change-Id: Iae50bc72c4ece64effe0b9b5f57e8d5e76057478 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-08-06Reduce fixed memory split on RPi3Jan-Simon Möller1-1/+1
As it turns out, the driver uses cma and the fixed memory split is only needed at boot time before cma takes over or for the old driver. Thus we can safely reduce it down again as it does not help with the limited cma memory at all. Change-Id: Ibd5da5da931d02777e8d69543ce44e6b536402b1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-03meta-rcar-gen3: weston-ini-conf: drop v4l2 featureHarunobu Kurokawa2-4/+0
Though R-Car has V4l2 renderer but it is special case. Then it makes no sence to add v4l2 configration into weston.ini file for AGL. Change-Id: Id91be4ce9bcca03126d01e50c587e8d945464f61 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-08-02We pin on 4.9 linux-ti-staging for now.Jan-Simon Moeller1-0/+1
Revert "linux-ti-staging moved to 4.14" This reverts commit 9e0ff1e9829f3cac0d7a4b90c5456164b8a01b96. Change-Id: I00dc5ce4d249b28b7f9d4e8559aa78a37edbbea3
2018-08-02Remove touchscreen additionJan-Simon Möller1-3/+0
Kernel 4.14 does not ship the dtb anymore, we pin on 4.9 for now. Change-Id: I96228b014dc09efbc7379383b2795a8d4eadf022 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-01meta-agl-bsp/meta-rcar-gen3: modify audio card name on rcar deviceHarunobu Kurokawa1-1/+1
latest sound card name in R-Car Starter Kit is changed "ak4613" from rsnddai0ak4613h, that is described in device tree. Therefore, asound.state file should be updated. Change-Id: I35dc0521da3061eedfa17ba2e28e68ab36353087 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-07-30Re-add dra7-evm-lcd-lg.dtb as it the screen of the board in CIJan-Simon Möller1-0/+3
Change-Id: I3265c71669124c3ee94be86993d45604356c5735 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-28linux-ti-staging moved to 4.14Jan-Simon Möller1-1/+0
Remove the 4.9 patch queue. Change-Id: Iadd7d4b74085f21f9e487173e9f69ed8969c114b Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-24Bump gpu memory on rpi3Jan-Simon Möller1-1/+1
This gives the gfx core some more head room. Change-Id: Ibff2aa3ed7fac1a3a199fa738cb47982ac56a298 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-07-24Enable weston to use systemd notifyTadao Tanikawa1-0/+1
Enable weston to use systemd notify to reduce causes of race condition between window manager and homescreen. Bug-AGL: SPEC-1471 Change-Id: I6431b5d52f38b982f6691b2961938664cc4f0544 Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2018-07-23linux-renesas: kernel: backport pn533_usb fix from upstreamMatt Ranostay2-0/+146
Backport pn533_usb incorect stack use from linux-next kernel NOTE: this kernel is tracking LTS so at some point it will need to be reverted Bug-AGL: SPEC-1544 Change-Id: I90fd3e0339dfdb148eb01b6ef836353bc2ac6a43 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>