summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp
AgeCommit message (Collapse)AuthorFilesLines
2019-05-24Ensure the rpi kernel includes the ethernet driver by defaultJan-Simon Möller2-0/+6
This is required (not only) for CI use. Bug-AGL: SPEC-2456 Change-Id: Ic00ff4945b71fa9cb2bced56ae08e04064a2cb4c Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2019-04-15meta-intel: Support the upsquare boardCorentin Labbe4-0/+16
This patch adds the necessary CONFIG for booting the upsquare board. The upsquare have an R8169 ethernet card and need it built-in for the kernel DHCP autoconf to work. The upsquare need some MFD_INTEL configs to boot. The meta-intel miss some CONFIG necessary for LAVA and NBD to works. Bug-AGL: SPEC-2075 Change-Id: I990732c78b53ac591dde83f4e372b420ea558fa7 Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
2019-03-26[RCAR] Fixed missing definition about virtual/eglHarunobu Kurokawa1-1/+1
Sometimes, libepoxy has an error during do_configure. PREFERRED_PROVIDER_virtual/egl definition in agl_m3ulcb was changed to virtual-gles-user-module from libegl. To fix this missing dependency, add virtual/egl definition in virtual-gles-user-module. ------ checking for egl... no configure: error: Package requirements (egl) were not met: No package 'egl' found ------ Change-Id: Ia6915af2a8babbbd3353513cc2c115387f6e178c Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> (cherry picked from commit dbb36c01b2230ce950c4effdcb455ea27c805c27)
2019-03-15meta-agl-bsp: meta-sancloud: weston-ini-conf: Fix resolution for cluster demoPaul Barker1-1/+3
If the 'hdmi-a-1-270.cfg' file has been removed (for example, when building the cluster demo) then don't try to modify it. Change-Id: I0cfcf21803eedd451d1ff160cc5b6d5950a1ab79 Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
2019-03-07meta-agl-bsp: meta-sancloud: weston-ini-conf: Use 720p resolutionPaul Barker1-0/+1
The BBE is has fairly limited CPU and Graphics power so everything is sluggish at 1080p. Things work much better at 720p. Change-Id: I359f7fcfff0868de31f78b324595d9891b5848a0 Signed-off-by: Paul Barker <paul@betafive.co.uk>
2019-03-07meta-agl-bsp: meta-sancloud: weston-ini-conf: Set correct gbm-formatPaul Barker1-0/+3
The default gbm-format needs to be changed on the BeagleBone Enhanced due to a hardware errata on the AM335x SoC. For further details see the following section of the TI wiki: http://processors.wiki.ti.com/index.php/Processor_Linux_SDK_Graphics_and_Display#AM3_Beagle_Bone_Black_Board_Configuration The TI documentation recommends further changes to powervr.ini and qt_env.sh, however it was found that only the gbm-format change in weston.ini is needed. Change-Id: I968384d0014fef2285d83902de044a5e97274d84 Signed-off-by: Paul Barker <paul@betafive.co.uk> (cherry picked from commit a237cf926dc7de7a6afe3980f58e877a40fbc3f9)
2019-03-07meta-agl-bsp: meta-sancloud: linux-bbe: Reserve 256MB for CMAPaul Barker2-0/+5
The tilcdc DRM driver needs more CMA memory available than we reserve by default in order to give a working GUI in AGL guppy. Change-Id: I3aea892889cdbc464acfdc5310cefd6654674286 Signed-off-by: Paul Barker <paul@betafive.co.uk>
2019-03-07meta-agl-bsp: meta-sancloud: linux-bbe: Apply AGL kernel changesPaul Barker1-0/+2
This is the first step towards integration of the Sancloud BeagleBone Enhanced (BBE) BSP with AGL. When building the BBE kernel for AGL we need to pick up the correct .inc files. Change-Id: I7cab264f4e53d389fd94150d6ed9697f968accc4 Signed-off-by: Paul Barker <paul@betafive.co.uk> (cherry picked from commit ae3a8f1589a4528b580ef3f230e5b419da1508e7)
2019-03-05meta-agl-bsp: meta-ti: weston-ini-conf: Apply only to dra7xx-evmPaul Barker1-2/+2
The git history shows that the weston-ini-conf changes in meta-agl-bsp/meta-ti were added to support the dra7xx-evm. These changes should not be applied for other machines which use the meta-ti layer such as the beaglebone and bbe. Change-Id: Id777d751be033e6671ebf387977ec7f5be0e5514 Signed-off-by: Paul Barker <paul@betafive.co.uk> (cherry picked from commit 78fe3e0999b3f9a124c1dd8e0157002d0af55cee)
2019-02-28Fix the build failed (do_rootfs) for RPi3-64, guppy_7.0.0genesis1-1/+1
When building for RPi3-64, there will have an error at do_rootfs. The error messages are: nothing provides linux-firmware-bcm43430 needed by linux-firmware-1:0.0+git0+8fc2d4e556-r0.noarch This is happened because RPi3 change to use linux-firmware-raspbian, but doesn't change config about RPi3-64 Change-Id: I4b1881f63e8fffca08d8edc32f19b057fbc0c637 Signed-off-by: Che-Hao, Liu <genesisgardian@gmail.com>
2019-02-18meta-agl-bsp: recipes-kernel: linux: add CONFIG_CAN_MCBA_USB to can-bus.cfgMatt Ranostay1-0/+1
Add CONFIG_CAN_MCBA_USB to allow usage of Microchip CANbus analyzers Change-Id: I86d5726150373cb14630a95c7767fd13dd5d0924 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2019-02-07meta-agl-bsp: recipes-kernel: linux: remove execute bit from usbaudio.cfgMatt Ranostay1-0/+0
Execute attribute on usbaudio.cfg is useless and should be removed. Change-Id: I0e7706a25c9668977a1104e25793d25b0f692f09 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit 39de28be03450e629f3953486c13770988c5053f)
2019-02-07meta-agl-bsp: recipes-kernel: linux: add usbmodem.cfg fragmentMatt Ranostay2-0/+8
Change-Id: I4a064972e1ed98dbcda209889d8e75b849cc56a5 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> (cherry picked from commit ba32016b5b4aa34059573f251e830e7eba873372)
2019-01-16Revert "Remove 4.9 patchqueue for new 4.14 kernel in meta-ti"Jan-Simon Moeller1-0/+1
Re-add the patchqueue for 4.9 . The 4.14 Kernel is missing the dtb for the screen. This reverts commit 6fc5ad52250e6dc63b40b17376668f40a016926e. Change-Id: I25f7650df642bb6c6e5fcb5cd0be525cc7938bcb
2019-01-16Revert "Remove patch in newer ti-staging kernel"Jan-Simon Moeller1-0/+1
The 4.14 kernel is missing the dtb of our screen. For now stay on 4.9 until the status is clear. This reverts commit 629062a55c41e8993761edf4a2a44400b72a6b91. Change-Id: Ibe4e87d1b81fff907bc35cacf10690b21fe45cb2
2019-01-15meta-agl-bsp: gen3: recipes-navigation: fix typo of gpsd-defaultsMatt Ranostay1-4/+4
gpsd-defaults was typo as gspd-defaults which causes the incorrect gpsd default settings on M3+KF Bug-AGL: SPEC-2111 Change-Id: I47a098893f214054a7cb687e1cf3a6897d077863 Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
2018-12-20kernel/4a: support more than 8 audio cardsStephane Desneux1-0/+2
When using Kingfisher + M3ULCB + MOST network devices, it's possible to reach the max number of statically allocated soundcards. This patch enables CONFIG_SND_DYNAMIC_MINORS which allows to declare more than 8 soundcards. Change-Id: Ibe0f75e00c343d7adfcdae0661e893fb39fc4169 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-12-20Support external RTCs for boards without itJan-Simon Möller2-1/+13
We add the rtc driver as module so we can attach e.g. http://wiki.seeedstudio.com/Grove-RTC/ Add the necessary drivers as module. Change-Id: Iacb8247f9e2edccabe854284672353a847a27e0d Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-12-18linux-renesas: Add smack patches to R-CarJosé Bollo1-0/+3
The patch for CGROUP2 is important for running without capabilities. Bug-AGL: SPEC-2006 Bug-AGL: SPEC-1016 Change-Id: I0dfec85bdc66b220e20776501522e71579e6a742 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-12-18linux-agl-4.14: Backport of Smack patch for cgroup2José Bollo2-0/+41
This patch allows to correctly handle the cgroup filesystem based on CGROUP2. The patch is made available through the file linux-agl-4.14.inc Bug-AGL: SPEC-1016 Bug-AGL: SPEC-2006 Change-Id: I2dba8bf0341d699c66a098c18fcb22a65b930e58 Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-12-18linux-agl-4.14: Backport of Smack patch for keysJosé Bollo2-0/+118
This add a patch that allows to handles keys with keyctl when Smack is active. The patch is not directly enabled but is made available in the file linux-agl-4.14.inc that can be included. Change-Id: I6ad74b1119190e093eaa5878c55cd233b181346f Signed-off-by: José Bollo <jose.bollo@iot.bzh>
2018-12-17Remove 4.9 patchqueue for new 4.14 kernel in meta-tiJan-Simon Möller1-1/+0
We update meta-ti to 4.14, thus we do no longer need the 4.9 patch queue of smack. Change-Id: I20d89c75029f29b0e6827979e70e85614d7a2e40 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-12-14Remove patch in newer ti-staging kernelJan-Simon Möller1-1/+0
The pending BSP update already has this patch applied (can be reverse-applied). Thus remove it. Change-Id: If3172270f40b21bd448c7113c7ab6f2a8f82023c Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-12-07Fix missing ivi-id-agentTadao Tanikawa2-3/+4
The ivi-id-agent was missing because its configuration wasn't updated although it is changed by the following patch of wayland-ivi-extension in meta-agl-demo. 22c9537 wayland-ivi-extension: Added ivi-id-agent by mtey Change-Id: I6faf18735cc0a2b7caea97a77fab3e11eaedcc49 Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2018-12-06weston-ini-conf: update gst-record logicScott Murray2-9/+5
The logic to handle the "virtual-output" and "gst-record" DISTRO_FEATURES seems to be unfinished, this update replaces the "virtual-output" usage with just "gst-record", as the former does not seem to exist in the AGL codebase. The virtualoutput.cfg file has been updated with the arguments from the virtual output section in the replacement .ini file from the mapviewer-demo recipe in meta-agl-demo, but some further investigation is required into tweaking things to produce a final .ini file that matches that one. These changes are a first step to getting to that end goal. Change-Id: Ib99e0717ed1e66016c6e936a3c398addcb6adfb7 Signed-off-by: Scott Murray <scott.murray@konsulko.com> (cherry picked from commit 262b016588cb153520362cf0aed3715e43d86672)
2018-11-30Enable agl-sota for h3ulcbAnton Gerasimov8-6/+40
Change-Id: I3c2d0df6e3afd4aa0671261f7d143ac15d88a836 Signed-off-by: Anton Gerasimov <tossel@gmail.com>
2018-11-29create-combined-dtb: Add dependency on virtual/kernelLeon Anavi1-0/+2
Add a dependency to virtual/kernel:do_deploy to ensure that the dtb and dtbo files needed for task compile will be present. Bug-AGL: SPEC-1775 Change-Id: I2d5872fe6bbd9a40c3f4185eea0efc10e6100b8b Reported-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-29agl_raspberrypi3.inc: Add create-combined-dtbLeon Anavi1-1/+1
Include the recently added Yocto/OE recipe create-combined-dtb for combining dtb and dtbo to Raspberry Pi builds. Bug-AGL: SPEC-1775 Change-Id: I4bb91d9e5d7f6f5b8fe6a9371d85b93aa26bff1e Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-22meta-agl-bsp: ptest-runner: v2.2 and LAVA supportKevin Hilman8-0/+580
Upgrade ptest-runner to v2.2 (first 6 patches), and add the WIP support for LAVA signal (patch 7). From branch: https://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/log/?h=timo/lava-ptest-runner2 Commit: https://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/commit/?h=timo/lava-ptest-runner2&id=11b29ce444610a07067a89b38e9e85c2162bbf67 Change-Id: Ic4ee5e3a9ab796fe7ccd1810b31e582370f99a25 Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-22create-combined-dtb: Combine dtb and dtboLeon Anavi1-0/+33
Combine a number of device tree overlays to a base blob with a specified filename in the deploydir only. This feature is required only for netboot therefore the files are not included in the image. Bug-AGL: SPEC-1775 Change-Id: I16ff043ee0d44d4151e1fb2ba714bd1542854bd8 Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-22fdtoverlay: Provide fdtoverlay-nativeLeon Anavi3-0/+62
Add a recipe for building fdtoverlay native from the source code of newer dtc without upgrading the version of the main dtc recipe. Bug-AGL: SPEC-1775 Change-Id: I251b22e0ecd4d2de088340daf19b602670668d55 Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-11-15[RCAR][upstream] remove dts patch for SDIO frequencyHarunobu Kurokawa1-0/+4
Bug-AGL: SPEC-1945 Latest meta-rcar update SDIO frequency for TI's WLAN driver. However, in M3 case, the this patch raise ti/wlcore driver WANING. [ 107.009706] ------------[ cut here ]------------ [ 107.014342] WARNING: CPU: 0 PID: 4224 at /kernel-source//drivers/net/wireless/ti/wlcore/sdio.c:145 wl12xx_sdio_raw_write+0xb0/0x160 [wlcore_sdio] [ 107.027375] Modules linked in: rfcomm 8021q garp stp mrp llc can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce btwilink bluetooth ecdh_generic wlcore_sdio rcar_can st_drv rfkill can_dev vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) sllin(O) pvrsrvkm(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6 [ 107.062537] CPU: 0 PID: 4224 Comm: wpa_supplicant Tainted: G O 4.14.35-yocto-standard #1 [ 107.071749] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT) [ 107.079138] task: ffff8005fc610e00 task.stack: ffff000020bc8000 [ 107.085054] PC is at wl12xx_sdio_raw_write+0xb0/0x160 [wlcore_sdio] [ 107.091316] LR is at wl12xx_sdio_raw_write+0x7c/0x160 [wlcore_sdio] <snip> [ 107.467808] ---[ end trace 0140d637a5afd50b ]--- [ 107.472613] wl1271_sdio mmc2:0001:2: sdio write failed (-84) [ 107.478340] ------------[ cut here ]------------ [ 107.483008] WARNING: CPU: 0 PID: 4224 at /kernel-source//drivers/net/wireless/ti/wlcore/main.c:796 wl12xx_queue_recovery_work.part.26+0x58/0x60 [wlcore] [ 107.496648] Modules linked in: rfcomm 8021q garp stp mrp llc can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce btwilink bluetooth ecdh_generic wlcore_sdio rcar_can st_drv rfkill can_dev vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) sllin(O) pvrsrvkm(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6 [ 107.531806] CPU: 0 PID: 4224 Comm: wpa_supplicant Tainted: G W O 4.14.35-yocto-standard #1 [ 107.541018] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT) [ 107.548406] task: ffff8005fc610e00 task.stack: ffff000020bc8000 [ 107.554363] PC is at wl12xx_queue_recovery_work.part.26+0x58/0x60 [wlcore] [ 107.561265] LR is at wl12xx_queue_recovery_work+0x1c/0x28 [wlcore] Change-Id: I6f15251e6997f52892efd118e8941af5930c5ca9 Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
2018-11-14dragonboard-410c: change init sequence of the qcom kernel moduleYuya Ono3-1/+34
Since db410c's DSP is enabled from the rocko branch, an error occurs at boot time. This patch is workaround by change init sequence of kernel module on booted with reference to the following discussion. (https://lkml.org/lkml/2018/10/31/440) Change-Id: I5e1b94a7b17889610b3beecccd3e99f4bc445226 Signed-off-by: Yuya Ono <Ono.Yuya@ap.MitsubishiElectric.co.jp>
2018-11-07Latest meta-altera supports wic IMAGE_FSTYPEJan-Simon Möller1-1/+1
In preparation of the layer uprev, fix the IMAGE_FSTYPE. Change-Id: Ic4c78fb27b0676383143b943d97a511b960e01b1 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-10-31gpsd-kingfisher-conf: fix PREFERRED_RPROVIDER issueStephane Desneux1-1/+1
virtual/gpsd-conf is a runtime dependency in packagegroup-agl-core-navigation. So, PREFERRED_RPROVIDER must be used in place of PREFERRED_PROVIDER Bug-AGL: SPEC-1861 Change-Id: I15b915c2e7a1410000f7527b13f3206242778bc0 Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
2018-10-19meta-agl-bsp: kernel: fix can-bus.cfgKevin Hilman1-1/+0
This config fragment for CAN bus had both an option for enabling as a module: CONFIG_CAN_C_CAN=m and for disabling: # CONFIG_CAN_C_CAN is not set Since the disable came last, disable wins. This caused the C_CAN driver and the C_CAN_PLATFORM driver (used by the TI dra7-evm) to be disabled in the kernel. To fix, remove the option to disable. Change-Id: I5be0cee161318cdfe7deb9c5e9c9f15d79cda7ac Fixes: d870883e7b29d212dc3e2a0e6158d837d4356c6a Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-10-19rcar: gstreamer: Update vspfilter device files when using IMR devicesDamian Hobson-Garcia3-0/+7
The meta-rcar-gen3-adas layer, active on m3ulcb and h3ulcb boards, enables the Renesas IMR device, which takes the first few /dev/videoX device file names, shifting the names of all of the other /dev/video devices. This patch updates the vspfilter configuration files to reflect the change. Change-Id: I326d3f5bb295f813e58d2318310cf86ad52744b3 Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
2018-10-15Add dummy iiodevice support for testFrederic Marec2-0/+29
Add new fragment iiodevice.cfg to enable dummy devices For iiodevices test Change-Id: I9f635334aec2f9cd675b522b86cdfa3ad8168f07 Signed-off-by: Frederic Marec <frederic.marec@iot.bzh>
2018-10-12Clean-up of wayland-ivi-extension_1.13.0 related legacy stuffMichael Teyfel1-5/+0
Since the agl demo is now using wayland-ivi-extension v2.0.2 everything related to v1.13.0 should be removed. That means all bitbake recipes and also the used patch files. Change-Id: I326c8e13c6084ec2135d6f75d64db260d347491e Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
2018-10-12[RCAR] ADSP enable and add sound hardware abstraction in DTRonan Le Martret2-0/+126
The ADSP on Renesas SoCs required a reserved memory area to become enabled, and this needs to be done manually. This patch adds sound hardware abstraction information for the m3ulcb and m3ulcb-kf (kingfisher) device trees. This is helpful on-board the ADSP for dynamically determining sound hardware at runtime, allowing single binaries to be used between the two boards. Future work will incorporate the h3ulcb and Salvator boards into the abstraction. Bug-AGL: SPEC-1227 Bug-AGL: SPEC-1424 Bug-AGL: SPEC-1571 Change-Id: I78edc5854a95520276bdcd9fd9766a120d2c04d7 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Mark Farrugia <mark.farrugia@fiberdyne.com.au> Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-12[RCAR] Enable Linux-based hypervisor execution in AGLRonan Le Martret2-0/+33
The upstream version of AGL boots Linux in EL1. This mode is not privileged enough to put in place the correct configuration of an hypervisor (e.g., KVM). This patch leverages the ATF rcar platform configuration variables to boot the Linux kernel in EL2, instead of EL1, allowing Linux-based hypervisors such as KVM to configure all the necessary stubs to properly run virtual machines. This patch has been successfully tested with ATF, KVM and AGL rootfs on the Renesas R-Car M3. Changelog: - Added arm-trusted-firmware patch, which makes this work easy to be tested by the community - This patch version does not contain Linux kernel modifications. In fact, these resulted not necessary with the proposed ATF patch and a recent kernel (higher than 4.6) Bug-AGL: SPEC-497 Bug-AGL: SPEC-1571 Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com> Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I8d20e36a09be1dba35b10193643ea00e4f388e95 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-12[RCAR] Update RCAR BSP to 3.9Ronan Le Martret1-2/+2
Bug-AGL: SPEC-1571 Change-Id: Ieefd423b79faa220531a887ff167227044ab6064 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-12[RCAR] Change RENESAS_DATADIR valueRonan Le Martret1-0/+2
* AGL doesn't use /usr/local for system files. All the Renesas libraries and binaries will be installed in /usr instead of /usr/local. Bug-AGL: SPEC-1571 Change-Id: Ibc40df5d492517773bf89e4e0f117a02d22d90cd Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-08Mutualizes code for ulcb card family conf fileRonan Le Martret5-106/+52
Remove duplicate code between ulcb card configuration card. Since more an more ulcb card and extention, it becomes difficult to maintain the conf file of the ulcb family. Change-Id: Id5648f4e75c464875d3b175c769e1fdd7f4312f5 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-10-05[RCAR] Fix ti-bt package name and revisionRonan Le Martret1-0/+3
* ti-bt needs to have a correct PN and PR to be compliant with dnf and so rpm. Bug-AGL: SPEC-920 Change-Id: I1b83ce54340922a23a6f0de5873e48699c2e1101 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
2018-09-29weston-ini-conf.bbappend: Set 720p for Raspberry PiLeon Anavi2-0/+11
Reduce the screen resolution for Raspberry Pi from Full HD to HD Ready (1280x720) to reduce the memory consumption and improve the behaviour of the whole system. This change is applied only for HDMI display on Raspberry Pi due to the limited hardware resources. Bug-AGL: SPEC-1745 Change-Id: Id2fb571b0822f8166086f5ad6a7fcf8ea25c933a Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-20linux-firmware_%.bbappend: Avoid rpi file duplicationLeon Anavi1-0/+5
In releases based on Yocto/OE Rocko firmware files for bcm43430 and bcm43455 are provided by linux-firmware-raspbian. This fix avoids duplication of firmware files for Raspberry Pi 3 Model B and B+ while building agl-demo-platform-crosssdk. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ic9e918f4ffd915b148530bb8e6bf9a6dc6a61c02 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-18agl_raspberrypi3.inc: WiFi on Raspberry Pi 3 B & B+Leon Anavi5-119/+1
Use linux-firmware-raspbian packages for bcm43430 and bcm43455. Bug-AGL: SPEC-1729, SPEC-1652 Change-Id: Ib634ee3351fa91d8d1704656f4a40d1b40cd05e3 Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
2018-09-13Uprev the nogfx machine include to the same stateJan-Simon Möller1-0/+3
as the ordinary m3 build. Change-Id: If07a26f1cb253b9863ea658e6cd122450f03a38b Bug-AGL: SPEC-1640 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
2018-08-31meta-agl-bsp: meta-ti: amx3-cm3: Add a fix for security_flags.incTom Rini1-0/+3
The way that the PM firmware for these devices is built takes very specific steps to only get the cross-compiler provided by OE and almost nothing else. Unfortunately when we build with the security_flags.inc file in our distro this changes some of the default behavior of the compiler and in turn we need to make sure to disable this and go back to the default behavior. Change-Id: I1ab8e20f77d7ab6a3c786437e9a9422b24f0e159 Bug-AGL: SPEC-1341 Signed-off-by: Tom Rini <trini@konsulko.com>