| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This is needed for network booting.
Change-Id: Iecee73a3b0bf31c3c68bb4beea1f41d07c9b5ec5
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
These are required for BSP 3.15.0 on thud (with Wayland 1.16/Weston 5.0)
Bug-AGL: SPEC-1837
Change-Id: I11321915a1be9b858e0b9fef35820c211e0074b4
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
Changes include:
- Add LAYERSERIES_COMPAT definitions to layer.conf files
- Remove now unnecessary SECURITY_*FLAGS over-rides from distro
configuration
- Set intel-corei7-64 preferred kernel version to 4.19 to match
latest linux-intel kernel available in meta-intel
- Update qemuarm preferred kernel version to 4.18 to match latest
linux-yocto
- Update firmware package and devicetree file names for raspberrypi3
- Remove linux-firmware bbappend specific to raspberrypi, it seems no
longer required and breaks the cross SDK build
- Update linux-intel bbappend to 4.19, remove now unnecessary patch
- Remove now unnecessary lttng-modules backport
- Update linux-raspberrypi bbappend to 4.14 kernel
- Added kernel configuration fragment for raspberrypi to disable
Kprobes. This is required until linux-raspberrypi is updated to
greater than 4.14.104 to avoid a build failure in lttng-modules
related to a check for known breakage in the kernel CONFIG_OPTPROBES
code.
- Replace obsolete base_conditional usage with oe.utils.conditional
- Add gstreamer1.0-plugins-bad bbappend for raspberrypi3 to disable
faad PACKAGECONFIG to avoid commercial license issues
- Remove unused and unbuildable Vayu gstreamer recipes
- Update linux-ti-staging bbappend for new BSP kernel
- Regen dcan2_pinmux_enable.patch for linux-ti-staging to remove fuzz
warning, and remove upstreamed fix_dcan_addresses.patch
- Remove ipumm-fw from meta-agl-bsp/meta-ti, as newer version is
available in the upstream BSP
- Update meta-agl-bsp/meta-ti weston patch to apply against 5.0.0
- Update meta-agl-bsp/meta-ti wayland-ivi-extension patch to apply
against 2.2.0
- Add ti-sgx-ddk-km patch to add AGL toolchain configuration file
- Remove now unnecessary fdtoverlay recipe
- Update core.cfg and ivishell.cfg in weston-ini-conf recipe to handle
move of ivi-controller.so configuration in Weston 5.0.0
- Update connman-ncurses patch to remove fuzz warning
- Add installation of systemd over-ride file for run-postinsts.service
in run-postinsts bbappend to workaround race condition between
ldconfig.service and the /sbin/ldconfig invocations in the
post-install scripts run by run-postinsts.service. The observed
failure was cynara's post-install script failing and its database
not being created.
- Remove now unnecessary valgrind backport
- Add patches to fix most driver compilation against newer kernels
- Update libmicrohttpd bbappend
- Remove libssp-dev from agl-image-graphical-qt5-crosssdk and
agl-demo-platform-html5-crosssdk, upstream have removed it from
non-mingw32 platform SDKs
- Update wayland-ivi-extension recipe to build 2.2.0, and update
local patches
- Update weston patches for 5.0.0. Patches:
0016-ivi-shell_add_screen_remove_layer_api.patch
0017-ivi-shell-register-ivi_layout_interface.patch
have been removed as they have been applied upstream and are no longer
necessary. Patches:
0018-compositor-add-output-type-to-weston_output.patch
0019-compositor-drm-introduce-drm_get_dmafd_from_view.patch
(both related to Waltham) have been disabled for now as they need
significant rework.
- Remove weston-conf RRECOMMENDS in weston bbappend to avoid conflict
with weston-ini-conf
- Add OECMAKE_GENERATOR = "Unix Makefiles" to aglwgt.bbclass to work
around CMake+ninja issue in cmake-apps-module
- Update dbus cynara patches for 1.12.10
- Add do_install_append in cynara recipe to remove /var/cynara from
cynara package so the directory creation and labelling in the
post-install scriptlet will function as intended
- Remove now unnecessary e2fsprogs backport
- Remove now unnecessary libcap-ng backport
- Update pulseaudio patches to remove fuzz warnings
- Update neardal patch to remove fuzz warning
- Update freetype patch to remove fuzz warning
- Rename opencv bbappend to 3.% to handle 3.x backports in upstream
- Updated qtwayland patch to remove fuzz warning
Changes from Stephane Desneux <stephane.desneux@iot.bzh>:
- Remove wayland-ivi-extension PREFERRED_VERSION
- Remove now unnecessary nativesdk-cmake patch
- Remove now unnecessary ptest-runner patches
- Remove now unnecessary harfbuzz patches
- Disable waltham-transmitter as it does not build against weston 5.0.0
- Update af-main, cynara, and security-manager to use pkg_postinst_ontarget
- Bump connman-ncurses revision to avoid deprecated ncurses functions
- Update libva package usage with new intel-vaapi-driver name
- Add patches to security-manager to fix compilation with gcc8
- Updated systemd bbappend
Changes from Jan-Simon Möller <jsmoeller@linuxfoundation.org>:
- Remove meta-agl-bsp/ROCKO.FIXMEs
- Remove linux-yocto_4.12.bbappend and now unnecessary associated
patch
- Remove now unneeded kern-tools-native patch
- Bump gstreamer PREFERRED_VERSIONs to 1.14.x
- Remove latencytop from packagegroup-agl-core-devel, it has been
dropped by upstream
- Remove now unnecessary rpm patches
- Update pulseaudio bbappend to 12.2
- Update opencv bbappend to 3.4
- Update freetype bbappend to 2.9.1
- Update dbus bbappend to 1.12.10
- Update weston bbappend to 5.0.0
- Update cynara patches to remove fuzz warnings
- Add patch to cynara to fix compilation with gcc8
- Add xmlsec1 bbappend to clear EXTRA_OECONF to fix compilation on
sumo or newer
Changes from Ronan Le Martet <ronan.lemartet@iot.bzh>:
- Update meta-rcar-gen3-adas layer gstreamer1.0-plugin-vspfilter
bbappend to version 1.0.1
Known issues (marked with FIXME):
- CMake+ninja issue in cmake-apps-module has been worked around with
OECMAKE_GENERATOR
- waltham-transmitter and the patches to weston related to it have been
disabled
- Currently unclear if patch to libcap-native is actually required or
not
Bug-AGL: SPEC-1837
Change-Id: I7b8b9ef667aec2d229952eace6663dfc761654d0
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Sometimes, libepoxy has an error during do_configure.
PREFERRED_PROVIDER_virtual/egl definition in agl_m3ulcb
was changed to virtual-gles-user-module from libegl.
To fix this missing dependency, add virtual/egl definition in
virtual-gles-user-module.
------
checking for egl... no
configure: error: Package requirements (egl) were not met:
No package 'egl' found
------
Change-Id: Ia6915af2a8babbbd3353513cc2c115387f6e178c
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
For SPEC-2075, I tried to boot an upsquare using NBD and it fail with:
[ 8.380343] EXT4-fs (ram0): bad geometry: block count 8492 exceeds size of device (4096 blocks)
[ 8.390509] EXT4-fs (ram0): bad geometry: block count 8492 exceeds size of device (4096 blocks)
For having a successfull boot, I needed to increase BLK_DEV_RAM_SIZE to
a larger value (16384).
Instead of increasing to only 16384, I use 65536 which is the value used in
other meta-xxxx like meta-freescale.
This patch increase BLK_DEV_RAM_SIZE to 65536.
Signed-off-by: Corentin LABBE <clabbe@baylibre.com>
Change-Id: I0792be1038d0bcd120c3c69c90cd6e1966c9b1ee
|
|
* For RCAR BSP v3.15.0, we need to fix this patch
Bug-AGL: SPEC-2185
Change-Id: Iadf40e6bfe964c3881d411cbdaab956ce524bc76
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
This patch is now upstream (RCAR BSP 3.15.0), so it useless to keep it
in AGL.
Bug-AGL: SPEC-2185
Change-Id: I10f1c99d4854c364960f310e4e12b385f6c55465
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
linuxptp is now on version 1.8 and compatible the current RCAR BSP (v3.15.0)
Bug-AGL: SPEC-2185
Change-Id: I10fa4e2339880ef786d0fef07ebf2864f1659187
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Current version of imagemagick is 7.0.7 and do not need backport.
Bug-AGL: SPEC-2185
Bug-AGL: SPEC-1687
Change-Id: Ie204c48e5907b4bb40418f9a0b10b0b1b35d5c77
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
python-wand is now useless
Bug-AGL: SPEC-2185
Bug-AGL: SPEC-1687
Change-Id: I97d0871185017e88fcac31dcef70c1d28fe636c1
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
This fix is now include cogent BSP (RCAR BSP v3.15.0).
Bug-AGL: SPEC-2185
Change-Id: Ib8de25f269a9c3b953075d33afb6f9d399f1471d
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Bug-AGL: SPEC-2185
Change-Id: I30f0ae0b760b540d41af7a0e7afafc9984d34b20
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
- u-boot in RCAR BSP v1.15.0 has been updated to v2018.09
so we can remove some old fix.
Bug-AGL: SPEC-2185
Change-Id: I1d40f0341edfdd0cedc5b1d58911bdc30677eeea
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
When using m3ulcb or h3ulcb with usb camera,
the board already had 10 video devices,
and opencv only support max device number is eight.
Need change to 16 so rcar can use usb camera with opencv.
[Patch Set 4]
Change max device number to 16.
Make this package specific to m3.
[Patch Set 5]
Make this patch generic not only for m3.
Change-Id: Ice8b34f92addb8b8a4bcaf6db5491862a4545244
Signed-off-by: zheng_wenlong <wenlong_zheng@nexty-ele.com>
|
|
Add CONFIG_CAN_MCBA_USB to allow usage of Microchip CANbus analyzers
Change-Id: I86d5726150373cb14630a95c7767fd13dd5d0924
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Change-Id: I4a064972e1ed98dbcda209889d8e75b849cc56a5
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Execute attribute on usbaudio.cfg is useless and should be removed.
Change-Id: I0e7706a25c9668977a1104e25793d25b0f692f09
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Re-add the patchqueue for 4.9 . The 4.14 Kernel is missing the dtb for the screen.
This reverts commit 6fc5ad52250e6dc63b40b17376668f40a016926e.
Change-Id: I25f7650df642bb6c6e5fcb5cd0be525cc7938bcb
|
|
The 4.14 kernel is missing the dtb of our screen. For now stay on 4.9 until the status is clear.
This reverts commit 629062a55c41e8993761edf4a2a44400b72a6b91.
Change-Id: Ibe4e87d1b81fff907bc35cacf10690b21fe45cb2
|
|
gpsd-defaults was typo as gspd-defaults which causes the incorrect
gpsd default settings on M3+KF
Bug-AGL: SPEC-2111
Change-Id: I47a098893f214054a7cb687e1cf3a6897d077863
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
When using Kingfisher + M3ULCB + MOST network devices, it's possible
to reach the max number of statically allocated soundcards.
This patch enables CONFIG_SND_DYNAMIC_MINORS which allows to declare
more than 8 soundcards.
Change-Id: Ibe0f75e00c343d7adfcdae0661e893fb39fc4169
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
We add the rtc driver as module so we can attach e.g.
http://wiki.seeedstudio.com/Grove-RTC/
Add the necessary drivers as module.
Change-Id: Iacb8247f9e2edccabe854284672353a847a27e0d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The patch for CGROUP2 is important for running
without capabilities.
Bug-AGL: SPEC-2006
Bug-AGL: SPEC-1016
Change-Id: I0dfec85bdc66b220e20776501522e71579e6a742
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
This patch allows to correctly handle the cgroup
filesystem based on CGROUP2.
The patch is made available through the file
linux-agl-4.14.inc
Bug-AGL: SPEC-1016
Bug-AGL: SPEC-2006
Change-Id: I2dba8bf0341d699c66a098c18fcb22a65b930e58
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
This add a patch that allows to handles keys with
keyctl when Smack is active.
The patch is not directly enabled but is made
available in the file linux-agl-4.14.inc that
can be included.
Change-Id: I6ad74b1119190e093eaa5878c55cd233b181346f
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
We update meta-ti to 4.14, thus we do no longer need the 4.9 patch queue of smack.
Change-Id: I20d89c75029f29b0e6827979e70e85614d7a2e40
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The pending BSP update already has this patch applied (can be reverse-applied).
Thus remove it.
Change-Id: If3172270f40b21bd448c7113c7ab6f2a8f82023c
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
The ivi-id-agent was missing because its configuration wasn't
updated although it is changed by the following patch of
wayland-ivi-extension in meta-agl-demo.
22c9537 wayland-ivi-extension: Added ivi-id-agent by mtey
Change-Id: I6faf18735cc0a2b7caea97a77fab3e11eaedcc49
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
The logic to handle the "virtual-output" and "gst-record"
DISTRO_FEATURES seems to be unfinished, this update replaces the
"virtual-output" usage with just "gst-record", as the former does not
seem to exist in the AGL codebase. The virtualoutput.cfg file has been
updated with the arguments from the virtual output section in the
replacement .ini file from the mapviewer-demo recipe in meta-agl-demo,
but some further investigation is required into tweaking things to
produce a final .ini file that matches that one. These changes are a
first step to getting to that end goal.
Change-Id: Ib99e0717ed1e66016c6e936a3c398addcb6adfb7
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit 262b016588cb153520362cf0aed3715e43d86672)
|
|
Change-Id: I3c2d0df6e3afd4aa0671261f7d143ac15d88a836
Signed-off-by: Anton Gerasimov <tossel@gmail.com>
|
|
Add a dependency to virtual/kernel:do_deploy to ensure that
the dtb and dtbo files needed for task compile will be present.
Bug-AGL: SPEC-1775
Change-Id: I2d5872fe6bbd9a40c3f4185eea0efc10e6100b8b
Reported-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Include the recently added Yocto/OE recipe create-combined-dtb
for combining dtb and dtbo to Raspberry Pi builds.
Bug-AGL: SPEC-1775
Change-Id: I4bb91d9e5d7f6f5b8fe6a9371d85b93aa26bff1e
Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Upgrade ptest-runner to v2.2 (first 6 patches), and add the
WIP support for LAVA signal (patch 7).
From branch:
https://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/log/?h=timo/lava-ptest-runner2
Commit:
https://git.yoctoproject.org/cgit/cgit.cgi/poky-contrib/commit/?h=timo/lava-ptest-runner2&id=11b29ce444610a07067a89b38e9e85c2162bbf67
Change-Id: Ic4ee5e3a9ab796fe7ccd1810b31e582370f99a25
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
Combine a number of device tree overlays to a base blob with a
specified filename in the deploydir only. This feature is
required only for netboot therefore the files are not included
in the image.
Bug-AGL: SPEC-1775
Change-Id: I16ff043ee0d44d4151e1fb2ba714bd1542854bd8
Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Add a recipe for building fdtoverlay native from the source
code of newer dtc without upgrading the version of the main
dtc recipe.
Bug-AGL: SPEC-1775
Change-Id: I251b22e0ecd4d2de088340daf19b602670668d55
Suggested-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Bug-AGL: SPEC-1945
Latest meta-rcar update SDIO frequency for TI's WLAN driver.
However, in M3 case, the this patch raise ti/wlcore driver WANING.
[ 107.009706] ------------[ cut here ]------------
[ 107.014342] WARNING: CPU: 0 PID: 4224 at /kernel-source//drivers/net/wireless/ti/wlcore/sdio.c:145 wl12xx_sdio_raw_write+0xb0/0x160 [wlcore_sdio]
[ 107.027375] Modules linked in: rfcomm 8021q garp stp mrp llc can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce btwilink bluetooth ecdh_generic wlcore_sdio rcar_can st_drv rfkill can_dev vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) sllin(O) pvrsrvkm(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6
[ 107.062537] CPU: 0 PID: 4224 Comm: wpa_supplicant Tainted: G O 4.14.35-yocto-standard #1
[ 107.071749] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT)
[ 107.079138] task: ffff8005fc610e00 task.stack: ffff000020bc8000
[ 107.085054] PC is at wl12xx_sdio_raw_write+0xb0/0x160 [wlcore_sdio]
[ 107.091316] LR is at wl12xx_sdio_raw_write+0x7c/0x160 [wlcore_sdio]
<snip>
[ 107.467808] ---[ end trace 0140d637a5afd50b ]---
[ 107.472613] wl1271_sdio mmc2:0001:2: sdio write failed (-84)
[ 107.478340] ------------[ cut here ]------------
[ 107.483008] WARNING: CPU: 0 PID: 4224 at /kernel-source//drivers/net/wireless/ti/wlcore/main.c:796 wl12xx_queue_recovery_work.part.26+0x58/0x60 [wlcore]
[ 107.496648] Modules linked in: rfcomm 8021q garp stp mrp llc can_bcm can bnep nfc arc4 wl18xx wlcore mac80211 cfg80211 crc32_ce crct10dif_ce btwilink bluetooth ecdh_generic wlcore_sdio rcar_can st_drv rfkill can_dev vspm_if(O) vsp2(O) vspm(O) uvcs_drv(O) sllin(O) pvrsrvkm(O) mmngrbuf(O) mmngr(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6
[ 107.531806] CPU: 0 PID: 4224 Comm: wpa_supplicant Tainted: G W O 4.14.35-yocto-standard #1
[ 107.541018] Hardware name: Renesas M3ULCB Kingfisher board based on r8a7796 (DT)
[ 107.548406] task: ffff8005fc610e00 task.stack: ffff000020bc8000
[ 107.554363] PC is at wl12xx_queue_recovery_work.part.26+0x58/0x60 [wlcore]
[ 107.561265] LR is at wl12xx_queue_recovery_work+0x1c/0x28 [wlcore]
Change-Id: I6f15251e6997f52892efd118e8941af5930c5ca9
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
Since db410c's DSP is enabled from the rocko branch,
an error occurs at boot time.
This patch is workaround by change init sequence of kernel
module on booted with reference to the following discussion.
(https://lkml.org/lkml/2018/10/31/440)
Change-Id: I5e1b94a7b17889610b3beecccd3e99f4bc445226
Signed-off-by: Yuya Ono <Ono.Yuya@ap.MitsubishiElectric.co.jp>
|
|
In preparation of the layer uprev, fix the IMAGE_FSTYPE.
Change-Id: Ic4c78fb27b0676383143b943d97a511b960e01b1
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
virtual/gpsd-conf is a runtime dependency in packagegroup-agl-core-navigation.
So, PREFERRED_RPROVIDER must be used in place of PREFERRED_PROVIDER
Bug-AGL: SPEC-1861
Change-Id: I15b915c2e7a1410000f7527b13f3206242778bc0
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
|
|
This config fragment for CAN bus had both an option for enabling as a
module:
CONFIG_CAN_C_CAN=m
and for disabling:
# CONFIG_CAN_C_CAN is not set
Since the disable came last, disable wins. This caused the C_CAN
driver and the C_CAN_PLATFORM driver (used by the TI dra7-evm) to be
disabled in the kernel.
To fix, remove the option to disable.
Change-Id: I5be0cee161318cdfe7deb9c5e9c9f15d79cda7ac
Fixes: d870883e7b29d212dc3e2a0e6158d837d4356c6a
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
The meta-rcar-gen3-adas layer, active on m3ulcb and h3ulcb boards, enables
the Renesas IMR device, which takes the first few /dev/videoX device
file names, shifting the names of all of the other /dev/video devices.
This patch updates the vspfilter configuration files to reflect the change.
Change-Id: I326d3f5bb295f813e58d2318310cf86ad52744b3
Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp>
|
|
Add new fragment iiodevice.cfg to enable dummy devices
For iiodevices test
Change-Id: I9f635334aec2f9cd675b522b86cdfa3ad8168f07
Signed-off-by: Frederic Marec <frederic.marec@iot.bzh>
|
|
Since the agl demo is now using wayland-ivi-extension
v2.0.2 everything related to v1.13.0 should be removed.
That means all bitbake recipes and also the used patch
files.
Change-Id: I326c8e13c6084ec2135d6f75d64db260d347491e
Signed-off-by: Michael Teyfel <mteyfel@de.adit-jv.com>
|
|
The ADSP on Renesas SoCs required a reserved memory area to become
enabled, and this needs to be done manually.
This patch adds sound hardware abstraction information for the m3ulcb
and m3ulcb-kf (kingfisher) device trees. This is helpful on-board the
ADSP for dynamically determining sound hardware at runtime, allowing
single binaries to be used between the two boards.
Future work will incorporate the h3ulcb and Salvator boards into the
abstraction.
Bug-AGL: SPEC-1227
Bug-AGL: SPEC-1424
Bug-AGL: SPEC-1571
Change-Id: I78edc5854a95520276bdcd9fd9766a120d2c04d7
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Mark Farrugia <mark.farrugia@fiberdyne.com.au>
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
The upstream version of AGL boots Linux in EL1. This mode is not
privileged enough to put in place the correct configuration of
an hypervisor (e.g., KVM).
This patch leverages the ATF rcar platform configuration variables to
boot the Linux kernel in EL2, instead of EL1, allowing Linux-based
hypervisors such as KVM to configure all the necessary stubs to
properly run virtual machines.
This patch has been successfully tested with ATF, KVM and AGL rootfs
on the Renesas R-Car M3.
Changelog:
- Added arm-trusted-firmware patch, which makes this work easy
to be tested by the community
- This patch version does not contain Linux kernel modifications.
In fact, these resulted not necessary with the proposed ATF patch
and a recent kernel (higher than 4.6)
Bug-AGL: SPEC-497
Bug-AGL: SPEC-1571
Signed-off-by: Michele Paolino <m.paolino@virtualopensystems.com>
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I8d20e36a09be1dba35b10193643ea00e4f388e95
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Bug-AGL: SPEC-1571
Change-Id: Ieefd423b79faa220531a887ff167227044ab6064
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
* AGL doesn't use /usr/local for system files.
All the Renesas libraries and binaries will be installed in /usr
instead of /usr/local.
Bug-AGL: SPEC-1571
Change-Id: Ibc40df5d492517773bf89e4e0f117a02d22d90cd
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Remove duplicate code between ulcb card configuration card.
Since more an more ulcb card and extention, it becomes difficult
to maintain the conf file of the ulcb family.
Change-Id: Id5648f4e75c464875d3b175c769e1fdd7f4312f5
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
* ti-bt needs to have a correct PN and PR to be
compliant with dnf and so rpm.
Bug-AGL: SPEC-920
Change-Id: I1b83ce54340922a23a6f0de5873e48699c2e1101
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Reduce the screen resolution for Raspberry Pi from Full HD to
HD Ready (1280x720) to reduce the memory consumption and
improve the behaviour of the whole system. This change is
applied only for HDMI display on Raspberry Pi due to the
limited hardware resources.
Bug-AGL: SPEC-1745
Change-Id: Id2fb571b0822f8166086f5ad6a7fcf8ea25c933a
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
Jan-Simon Möller
Stephane Desneux
Scott Murray
Harunobu Kurokawa
Corentin Labbe
Ronan Le Martret
zheng_wenlong
Matt Ranostay
José Bollo
Tadao Tanikawa
Anton Gerasimov
Leon Anavi
Kevin Hilman
Yuya Ono
Damian Hobson-Garcia
Frederic Marec
Michael Teyfel