Age | Commit message (Collapse) | Author | Files | Lines |
|
Changes:
- Since linux-fslc-lts does not boot on the EVK at the moment,
and both it and linux-fslc still do not have support for the
HDMI output, switch back to using linux-fslc-imx with tweaks
to use etnaviv as we did pre-kirkstone.
- A bbappend has been added for linux-fslc-lts since that was
missed in a previous upgrade, and even though we are not using
it now, it is possibly useful for other i.MX variants.
- A machine template for using the NXP BSP with the Vivante GPU
driver, imx8mq-evk-viv, has been restored, as testing shows it
now works with the current panel-less homescreens. As before,
the intent of this configuration is for testing or as an example
of potential production use of meta-freescale where NXP support
is available.
- Start up of Bluetooth support has been disabled, as it currently
causes kernel oopses or panics (both have been seen in testing).
This happens with both machine templates. SPEC-4807 has been
opened to track this issue.
Bug-AGL: SPEC-4799
Change-Id: I38e4e720643714541efb0fed08d5ab64545bb02d
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28937
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add bbappend to apply AGL kernel config fragments to the new linux-bb.org
kernel recipe used in meta-ti-bsp for Beagle platforms now.
Bug-AGL: SPEC-4785
Change-Id: I2ca57d4a70b296fd00e72520ada267d96a149a21
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28857
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 07c3fbfb7716c290bdcf3931f27bea1a36fb6520)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28842
|
|
kernel-module-vspmif package name is no longer used. We should
correct kernel-module-vspm-if in these files.
Bug-AGL: SPEC-4780
Change-Id: I782319295fa0607a97971188a0322398a187b680
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28758
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Latest TI graphics package uses udev rules to initialize the driver
and does not install legacy SysVinit rc.pvr script unless udev isn't
available. No need for systemd service workaround anymore.
Bug-AGL: SPEC-4723
Change-Id: I3ce5d270357578086152d87fb2cf91512691e1a9
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28740
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit b5e66768b3dcb5fe9ae5b5eed030f8b507b0d5b3)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28771
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Latest TI graphics completely redone its dependencies and preferences
to be aligned with upstream and use Mesa packages as proper providers
for GBM, EGL, GLES, etc. components. There's no more need for local
workarounds to adjust graphics settings.
Note: SGX is currently set in meta-ti-bsp to fall back to software
rendering and will be fixed later. Rogue in newer K3 devices is fully
functioning though.
Bug-AGL: SPEC-4723
Change-Id: Ifb6f594c6203924aa1b90f421d475b716c61a796
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28743
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
(cherry picked from commit d176193ef540fca9ed0c7a8d081b810ecd48946c)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28773
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Latest TI graphics libraries for SGX and Rogue GPUs no longer include
Mesa pieces, but rather build on top of proper Mesa packages (although
patched). Remove local bbappend disabling GBM.
Bug-AGL: SPEC-4723
Change-Id: I8a4ba82d0e7540d6fe2da7efdcefab7a2dc77c6b
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28739
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 4273c005121831593f4d0572604b71d5b5f25483)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28769
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Latest TI graphics completely redone its dependencies and preferences
to be aligned with upstream and use Mesa packages as proper providers
for GBM, EGL, GLES, etc. components. There's no more need for local
workarounds to adjust graphics settings.
Note: SGX is currently set in meta-ti-bsp to fall back to software
rendering and will be fixed later. Rogue in newer K3 devices is fully
functioning though.
Bug-AGL: SPEC-4723
Change-Id: I072a5e25bdbb444db8e7d4b87a1f181c349240ea
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28744
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 57df0aefa1b7c80eb3f65cb2f5151937869cd102)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28774
|
|
Latest TI graphics now uses Mesa, but it uses a slightly newer and
patched version of Mesa for SGX and Rogue GPUs. Since generic mesa
virgl patch from meta-agl-bsp/core already exists in that version
of Mesa, need to skip applying it here.
Bug-AGL: SPEC-4723
Change-Id: I795e2bf41bea8305be25418de7cc3262aefb3b4a
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28742
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 3dcb35ca7e447bc984f09ef522d66f270d942af2)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28772
|
|
SPEC-4724 added a generic backported patch to mesa. But instead of
adding it directly to mesa_%.bbappend, it should have been added to
mesa_agl.inc which is only active when "aglcore" feature is enabled,
making it yocto-check-layer safe.
Bug-AGL: SPEC-4723
Change-Id: I226cba14de917f6e4109d1dc1df364cb74e7ee45
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28741
Reviewed-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
(cherry picked from commit f006538eaecfd0f6130797d7bb4dc59c4e2ecb97)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28770
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Use AGL_FEATURES instead of DISTRO_FEATURES.
Bug-AGL: SPEC-4771
Change-Id: I9a866a4b921e2816613784768c60b874da28a16c
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28681
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
(cherry picked from commit 1b560939b2e94514b88a43140dfad5ced0025e7f)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28660
|
|
As was done in commit 32744858 for the plain h3ulcb/m3ulcb MACHINE
configuration, add rcar-gen3 overrides to the Kingfisher variable
tweaks to avoid unwanted side effects when building for other
MACHINEs when using multiconfigs. This is needed to be able to
build the KVM demo image for h3ulcb-kf.
Bug-AGL: SPEC-4760
Change-Id: Ie52f0a4a586398875f88e558ef465162c9fdfec1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28657
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This adds
0001-virgl-don-t-a-use-staging-when-a-resources-created-w.patch which is
a backport from mesa 22.2.5 as a tentative fix for running on virgl on the x86
platform.
This issue seems have been fixed 22.2.4 and 22.2.5, but the original
change was initially quite a long time before in 22.0.X and we seem to
be using 22.0.3.
Bug-AGL: SPEC-4724
Change-Id: I255e30d8e513b8f3bbfa720a24c1afcbd40af2c9
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28604
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This would fix fetch build failures with the gstreamer plugins which seems
to have been caused by a git to gitsm replacement in the original
recipes.
Bug-AGL: SPEC-4730
Change-Id: I4b1d700a6645d280b65f3f3202b76208d30061e7
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28583
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
(cherry picked from commit ae6ecba1b6239de0b075cb1d42a62604ae7523f0)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28601
|
|
Add a meta-rcar-gen3 specific weston-init bbappend to add the
weston user to the display group. This is preferable to unmasking
the bbappend in upstream meta-rcar-gen3, as we do not want any of
the other changes it contains (or may contain). This change is a
bit of a stopgap required for running weston or agl-compositor as
the weston user without the agl-driver user session unit in e.g.
the agl-image-weston image or the KVM or IC host images.
Future work will try to align the required groups with upstream
systemd-udevd expectations.
Bug-AGL: SPEC-4618
Change-Id: I22e8aaa095114802242fb1ed150dec2a5055fda9
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit c1b436f4882737ce0b9a95853954d0f4daab2d86)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28419
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Update the BBMASK definitions for the rcar3 platforms in meta-agl-bsp
to include the meta-renesas/ component of the path so that they will
not mask out any of our files under meta-agl-bsp/meta-rcar-gen3.
Bug-AGL: SPEC-4618
Change-Id: I6434f54bb50784c0673b54648165e0c5118f0c7e
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
(cherry picked from commit b5001a4a5abbe8e7944446025dd63be725c491e4)
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28418
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This is a just a workaround for the time being, to avoid some graphical
artefacts seen only when booting up for the first time the image.
Introduced with https://gitlab.freedesktop.org/mesa/mesa/-/commit/6f68cacf619f7f13bc870355709224c1f3e9bbd8.
Bug-AGL: SPEC-4651
Change-Id: Ie2ac5d170790293dc5860d5f27f26ee811f4a4b5
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28300
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Tested-by: Jenkins Job builder account
|
|
Changes:
- Appending the virtio kernel metadata to SRC_URI in the linux-yocto
bbappend was having the side-effect of overriding a lot of the
changes from the other AGL configuration fragments. To avoid this,
prepend the addition to AGL_KCONFIG_FRAGMENTS instead.
- Add the HDA sound driver config fragment for virtio machines to
allow using the QEMU emulation.
- Add config fragment for the virtio kernel to ensure that
CONFIG_DRM and the fbdev emulation are on.
- Add config fragment for the virtio kernel to turn on CONFIG_PCI,
as there are some peripherals that we may need to expose to guests
with it. This and the DRM changes will be rationalized in the
metadata repo once it's clear we do need them.
Bug-AGL: SPEC-4618
Change-Id: I453b84d9840498772afd01404dd374f5c1d245da
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28191
ci-image-build: Jenkins Job builder account
Tested-by: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Commit d009fa0c42042a0b7d069779852953621e46469b as part of SPEC-4156 added a
kernel config fragment to disable CONFIG_RELAY. Since this fragment is only
applied to BBE, there's no need for it to reside in meta-agl-core and can be
moved to meta-agl-bsp/meta-sancloud.
Bug-AGL: SPEC-4156
Change-Id: I5da2632d6eb00bbf99ddb48cef861564d2ce868d
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28203
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The various configuration changes done by the include files for the
rcar3 machines in meta-agl-bsp prove problematic when using a rcar3
machine in a multiconfig configuration with different machines in
other configs. This can potentially be avoided in the future with
a significant rework of the local.conf generation in aglsetup.sh,
but for now, too avoid issues, add rcar-gen3 or h3ulcb overrides to
the variable changes in those files. That ensures that the changes
will only apply to the specific machine being targeted.
So far this has only been tested with the h3ulcb, it is likely that
more fixes are required for other rcar3 machines, as well as the
machines from other BSPs.
Bug-AGL: SPEC-4618
Change-Id: Ifa6735337e673a92c56d5457b97d09a5b86cc0e1
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28185
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Undo the out of date tweak of rc.pvr.service to make it a dependency
of weston@.service done in meta-rcar-gen3's gles-user-module recipe.
For now, just tweak the dependency back to weston.service in our
bbappend in meta-agl-bsp, this can be removed when meta-rcar-gen3
includes a fix.
Bug-AGL: SPEC-4607
Change-Id: I16ef13d2af9b2ed485ce8b98501f39bf96aba3e2
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28133
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This reverts commit a12a83ebdfcd4287264e50edf3b11a156f418ae9. The patch
is no longer needed as the kernel version used by linux-bbe has been
updated.
Change-Id: I2ea6fd05b99018517fb2e1f3f03153dfd4ccd0e8
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/28043
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-4453
Change-Id: Id4dd3c3543dedf15cf09956414f32face685e498
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27881
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
of local files.
This will allow using branches for supporting multiple kernel versions
more easily.
Note, that BSP description root file virtio-aarch64-standard.scc has to
be kept local withing a recipe. This is needed to add this scc file
explicitly to SRC_URI to have AGL VIRTIO patches applied during kernel
recipe build.
As explained in [1, 2], Yocto kernel metadata is commonly used for two
purposes:
1. To construct Yocto kernel git by committing patches listed in scc
files.
2. To configure Yocto kernel during Yocto build.
When scc file is not explicitly added to SRC_URI, then patch commands
will be ignored during Yocto build because it is assumed that patches
are already pre-applied during Yocto kernel git tree construction.
But, there is not AGL Linux kernel tree, only a repository for AGL
kernel metadata (this one). So, patches from this metadata repository
have to be applied during kernel recipe build.
On the other hand, to ignore patches from YP kernel metadata (which are
already pre-applied), standard.scc is included with `nopatch` keyword.
[1]: https://www.yoctoproject.org/pipermail/yocto/2019-October/046986.html
[2]: https://docs.yoctoproject.org/kernel-dev/maint-appx.html
Bug-AGL: SPEC-4452
Change-Id: Idde8e507eb18fa26e6a5b84ab8443576badb58bf
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27878
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
RCAR_BL33_EXECUTION_EL is set to not conflict with other layers.
Replace '0001-Boot-Normal-World-in-EL2.patch' which conflicts with:
meta-agl-refhw/meta-agl-refhw-gen3/recipes-bsp/arm-trusted-firmware/files/0001-Boot-Normal-World-in-EL2.patch
Bug-AGL: SPEC-4532
Change-Id: Ia0291030748e7c7c51c4a706df1994275dffcdf7
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27938
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* The last update of RCAR BSP has change the recipes name of the recipes kernel-module-vspm-if.
meta-agl must be updated too.
Bug-AGL: SPEC-4517
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I02f978c2ddca7e5a2d12e25145ea1cfad1be0a25
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27868
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This reverts commit d60a670349027852e93d006114b82a82cff5f27a.
Bug-AGL: SPEC-4517
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I2c8cffa37a99cefa80510998aae1920231006090
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27867
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Change-Id: I3a67f2dca0148be04d96e5261a4bef4030e93fbf
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27852
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The recent bump of meta-freescale with the kirkstone 4.0.2 upgrade
brought an upgrade to 5.18 in the linux-fslc kernel, which breaks
sllin compilation. Tweak the i.MX6 and i.MX8 machine templates to
use the 5.15 linux-fslc-lts kernel, which matches linux-yocto in
poky and seems a better choice going forward with kirkstone.
Bug-AGL: SPEC-4501
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ib75d8c844301c5ac902e18d02ff8ac6176f614c7
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27842
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This adds a workaround for the strictly versioned gstreamer bbappends
until the BSP gets updated to be compatible with 4.0.2.
Bug-AGL: SPEC-4473
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ie25b18779ac6fdb3efd9102317955342bd8e58af
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27766
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The patch 0004-ADSP-enable-and-add-sound-hardware-abstraction_kf.patch
is no longer used in AGL.
So delete this unused patch.
Bug-AGL: SPEC-4434
Signed-off-by: Zhou Mingying <zhoumy@fujitsu.com>
Change-Id: I8489e24b9430a2769a10b90135add316042a2584
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27747
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
|
|
Remove machine templates and associated files for:
- hsdk
- dragonboard-410c
- dragonboard-820c
- nitrogen6x
Bug-AGL: SPEC-4402
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I7ff2665fe5ceef55454905d57e7793d5fcf0ef8a
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27701
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This commit would remove WANING for kernel-module-vspmif
RPROVIDES:${PN}:remove += is not a recommended operator combination, please replace it.
Bug-AGL: SPEC-4436
Change-Id: I1e2d736fc9450766ddff9a0abb0ba87c15d8fd3d
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27702
Reviewed-by: Naoto YAMAGUCHI <naoto.yamaguchi@aisin.co.jp>
Reviewed-by: ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
* Remove RPROVIDES:${PN} "kernel-module-vspm-if" in kernel-module-vspmif
recipes. kernel-module-vspmif should not provide "kernel-module-vspm-if". "kernel-module-vspm-if" is a separate package with module rules.
* Add udev rules for /dev files: uvcs_drv, vspm_if, mmngr, mmngrbuf
Bug-AGL: SPEC-4436
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I44a0665d6576cdcc9dbbfe5401de3dc9bc281473
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27635
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Masking out the weston_%.bbappend
In patch 27430, may have forgotten to modify this file.
Bug-AGL: SPEC-4389
Signed-off-by: duerpei <duep.fnst@fujitsu.com>
Change-Id: I9b451f236613c7e9efba158713723051b10b489b
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27502
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
VIRTIO-SCMI device implements the Arm System Control and Management
Interface (SCMI) [1]. This VIRTIO device is part of "Virtual I/O Device
(VIRTIO) Version 1.2" specification [2].
The SCMI can be used for sensors, power state management, clock
management and performance management among other things.
Enable IIO-SCMI driver that works on top of VIRTIO-SCMI and supports
SCMI sensors.
[1]: https://developer.arm.com/Architectures/System%20Control%20and%20Management%20Interface
[2]: https://docs.oasis-open.org/virtio/virtio/v1.2/csd01/virtio-v1.2-csd01.html
Bug-AGL: SPEC-3865, SPEC-4365
Change-Id: Iaf2092d869d938d0b45029038d8eea36110d7e3e
Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27473
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
make them more standardized
Bug-AGL: SPEC-4374
Signed-off-by: duerpei <duep.fnst@fujitsu.com>
Change-Id: Ie11168254ab76acd11382b33501fb4881710a5bf
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27479
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Updates to get the virtio-aarch64 machine building after the
upgrade to Yocto Project 4.0 / kirkstone:
- Switch to the 5.15 linux-yocto kernel and drop the local backport
of the 5.10 recipe.
- Fix override syntax in the machine-specific linux-yocto bbappend.
- Remove all the patches applied for the virtio and virtio-snd
configuration fragments, they seem to have all been applied
upstream.
Bug-AGL: SPEC-4356
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I96d4bb9b04d74280d1a3767fe17284fe6049fcba
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27465
Reviewed-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
An increasing number of advanced systemd features with respect to
immutable systems and sandboxing are effectively dependent on the
usrmerge distro feature, so it seems reasonable to enable it since
upstream AGL currently requires systemd usage. See SPEC-4352 for
more detailed discussion of rationale.
Changes:
- Add usrmerge to AGL_DEFAULT_DISTRO_FEATURES in poky-agl.conf.
- Add workarounds via bbappends in meta-agl-bsp for the assumption
of using /lib instead of ${nonarch_base_libdir} in various
meta-rcar-gen3 kernel module recipes. This will be followed up
with upstream to hopefully fix the recipes.
- Replaced some explicit /sbin usage with ${sbindir} in the
initramfs-netboot recipe used by the agl-netboot feature to avoid
packaging errors.
Bug-AGL: SPEC-4352
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ibc0ae1e2628aca6474401e0852bbb97085f4ecfa
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27437
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jenkins Job builder account
ci-image-build: Jenkins Job builder account
ci-image-boot-test: Jenkins Job builder account
|
|
Add a work around in the arm-trusted-firmware bbappend for
meta-rcar-gen3 to fix intermittent failures due to a bug in the
upstream recipe where it is dependent on something else happening
to have run first and creating DEPLOY_DIR_IMAGE.
Bug-AGL: SPEC-4343
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ibe43bdb0cf1b525e30ada758e12b687f5dda0d3f
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27431
ci-image-build: Jenkins Job builder account
Reviewed-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Work around use of obsolete Weston backend-fbdev in meta-rcar-gen3
when building without the proprietary driver stack. Masking out the
weston_%.bbappend seems the simplest approach for now, as forcing
USE_GLES = "1" to disable the adding of -Dbackend-default="fbdev" to
EXTRA_OEMESON triggers adding "libgbm" to DEPENDS, which breaks due
to that being a component specific to the proprietary stack we are
explicitly disabling. If the "libgbm" usage in the bbappend was
instead "virtual/libgbm" as is now used in poky, it might be possible
to just tweak PREFERRED_PROVIDER_virtual/libgbm = "mesa".
Bug-AGL: SPEC-4343
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I603a9c4744befb97513808714cedd3e21664525f
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27430
ci-image-build: Jenkins Job builder account
Reviewed-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Provide a default value of PACKAGE_ARCH for the packagegroup
packagegroup-multimedia-libs from meta-rcar-gen3 to avoids errors from
a new packaging QA check with respect to packagegroups depending on
versioned library packages needing to be machine-specific.
Note that this needs to be done in global configuration space as
opposed to in a bbappend because the value needs to be set before the
packagegroup bbclass is inherited. This can be removed when upstream
is fixed to add the required PACKAGE_ARCH = "${MACHINE_ARCH}".
Bug-AGL: SPEC-4343
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I60dc1fbb976c7e08b174017268949dc43d6d17fe
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27429
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The kirkstone-dev_3.5_M3_v5.9.0 branch of meta-renesas contains a
new bbappend for cogl which requires meta-gnome. Since nothing
in the BSP layer itself depends on cogl, and there is currently
no obvious usecase for cogl outside of GNOME desktop related
libraries, BBMASK out the bbappend so we do not need to pull in
meta-gnome. This can be revisited if an AGL member presents a need
for cogl on rcar3 in their downstream use of AGL. Ideally, upstream
will move the bbappend to a dynamic layer directory to remove the
issue.
Bug-AGL: SPEC-4343
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I6e55c07d1ff1fd7d68d1798ecca3c9c1b35cdf14
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27428
Reviewed-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-4343
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I5de57cdc2ba0fbc0692f0a4c3a8d7a1c5aa6a3ec
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27427
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-4343
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I867c25e7a8ee1fd43e07d0e72ab3d35d5289471e
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27426
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-4343
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Change-Id: I0e7f9dfbd18f1c2ec99b96c3a9afad57a424e6c9
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27425
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
On the branch kirkstone-dev_3.5_M3_v5.9.0 of meta-renesas some recipes
are now up to date and don't need patches anymore.
Bug-AGL: SPEC-4343
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
[Restored arm-trusted-firmware patch as it is still needed for any
potential Xen use.]
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ib0eac9fe65f28645ec9aab5cf987508457d92ea9
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/27424
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Changes:
- Rename machine template and related files to use j721e-evm instead
of j7-evm to match meta-ti change.
- Update machine template to point into new meta-ti-bsp layer in the
meta-ti repository.
- Drop local multiconfig TMPDIR tweak as it seems unrequired now,
and is triggering a build failure around sysroot population that
needs further investigation. It may be added back in the future
if the single TMPDIR again proves to have issues.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I8c2717bb749735cfe36d86b48e3c61b1cca990e4
|
|
Changes:
- Update machine template to point into new meta-ti-bsp layer in the
meta-ti repository, and update the dynamic layer directory name to
match.
- meta-ti currently does not have Weston 10.0.0 support, and testing
confirms it will not build against the currently provided version
of the SGX GPU driver, so disable using it for now.
- Even though the GPU driver is not being used ATM, the local patch
for ti-sgx-ddk-km to handle AGL toolchain naming has been updated
to ease testing meta-ti updates down the road.
- The Weston bbappend that had been based on meta-arago's has been
removed for now. A re-evaluation of what is needed locally will
need to be done when TI have their Weston 10.0.0 support settled.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ie61cef722a643791970214710835423a21696694
|
|
Changes:
- Rename machine template and related files to use imx8mq-evk instead
of imx8mqevk to match meta-freescale change.
- Switch to purely using the default "mainline" BSP configuration in
meta-freescale for imx8mq-evk as opposed to the tweaking of the
"nxp" configuration previously used. The mainline configuration now
builds a working image, and this lowers maintenance on our part.
- Remove imx8mqevk-viv configuration to build with Vivante GPU driver.
NXP have not yet released Weston 10 support, and at this point the
etnaviv driver is stable. If a demonstration of support of Vivante
is requested in the future (e.g. for other i.MX8 variants that still
require it), this can be revisited.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I7e279268463f68978ecd2990927aab6d64e3cbd2
|
|
Update the create-combined-dtb recipe that creates merged dtb files
for netbooting on the Pi 4 to handle the upstream kernel change to a
separate Pi 4 specific version of the vc4-kms-v3d overlay (it now
needs vc4-kms-v3d-pi4.dtbo). Also remove the Pi 3 support, as AGL
no longer supports it.
Bug-AGL: SPEC-3819
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: I1c331dc3a752e3cc778d40f59dae693b60d5fc96
|