Age | Commit message (Collapse) | Author | Files | Lines |
|
Set KERNEL_IMAGETYPE to Image to ensure correct
generation of kernel7.img and successful booting
of AGL on Raspberry Pi 3 and 2 with output from
the serial console.
v2 (jsmoeller): Also adapt
templates/machine/raspberrypi3/test/hwtest.short.environment
v3 (jsmoeller): disable CI hwtests as rpi firmware is used
Bug-AGL: SPEC-649
Bug-AGL: SPEC-650
Change-Id: If4335ffed7047fd2fbbf4bbd2dff54322cd0bf07
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9727
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
|
|
The meta-raspberrypi layer already supports raspberrypi3-64, where
it will build a 64-bit kernel.
Add templates so that "aglsetup.sh -m raspberrypi3-64" works.
Note that 64-bit kernel build is only supported in the v4.9 branch of
the rpi kernel, and that the kernel image type is "Image" instead of Image.
Change-Id: Iee728191dc38521be607787d5736d21372f1dff5
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9767
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Remove class sdcard_image-rpi-gdp. Historically it
was added during the initial porting of AGL to
Raspberry Pi and it had been taken from GENIVI
Development Platform. It is not needed anymore.
Bug-AGL: SPEC-409
Change-Id: I3f78b5fd92b08962c4a1fe07753627ae81da23ec
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9765
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This patch set add DDR hibernation image area.
0x40000000 <-> 0x77FFFFFF : kernel
0x78000000 <-> 0x7FFFFFFF : hibernation image area
and Enable swsusp DMA support(sdhi DMA support).
Change-Id: Ia3011d4979f38f0d1cbc5f9f1964e8fa07a7fc20
Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@jp.fujitsu.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9697
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Scale back GPU to 256MB for successful booting on
Raspberry Pi 2. The same change has been already
applied to the configurations for Raspberry Pi 3
as part of the work on SPEC-410 and SPEC-469.
Bug-AGL: SPEC-616
Change-Id: Iafa83209d9e3b04609d820e3492ddb6266864f92
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9741
Reviewed-by: Thomas Rini <tom.rini@gmail.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This patch set add DDR hibernation image area.
0x40000000 <-> 0x77FFFFFF : kernel
0x78000000 <-> 0x7FFFFFFF : hibernation image area
and Fix Black blink correction of display.
Change-Id: I286b5291cb2eed22334a95132ba4a137eff298ca
Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@jp.fujitsu.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9699
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Change-Id: I4ee4ff339e34feb460e5faadfe3b3b937f881e56
Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@jp.fujitsu.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9701
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
SOTA was temporarily disabled becaused it caused build errors
Change-Id: I57f1704c3cacf08cda6cb6a0fa4ec1fe0df305f3
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9657
Reviewed-by: Martin Kelly <mkelly@xevo.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Reviewed-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This patch set is a support to Hibernation for a porter board.
I've commit with Hibernation Off patch, because it depends strongly on user land.
If you can use Hibernation, Please add local.conf agl-porter-hibernate.
OVERRIDES .= ":agl-porter-hibernate"
DISTRO_FEATURES_append = " agl-porter-hibernate"
Change-Id: I3f0560074b710c27f49a73ca871038246d222b73
Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@jp.fujitsu.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9449
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This patch set is a support to Hibernation for a porter board.
I've commit with Hibernation Off patch, because it depends strongly on user land.
If you can use Hibernation, Please add local.conf agl-porter-hibernate.
OVERRIDES .= ":agl-porter-hibernate"
DISTRO_FEATURES_append = " agl-porter-hibernate"
Change-Id: Ic64c9494a4bbd2518ef1aa334325b96eb7a9479e
Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@jp.fujitsu.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9451
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This patch set is a support to Hibernation for a porter board.
I've commit with Hibernation Off patch, because it depends strongly on user land.
If you can use Hibernation, Please add local.conf agl-porter-hibernate.
OVERRIDES .= ":agl-porter-hibernate"
DISTRO_FEATURES_append = " agl-porter-hibernate"
Change-Id: I06dfe57abf8ff8c79151e4f15432b5445a7811e2
Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@jp.fujitsu.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9447
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This patch set is a support to Hibernation for a porter board.
I've commit with Hibernation Off patch, because it depends strongly on user land.
If you can use Hibernation, Please add local.conf agl-porter-hibernate.
OVERRIDES .= ":agl-porter-hibernate"
DISTRO_FEATURES_append = " agl-porter-hibernate"
Change-Id: I6cde0492c28ec9ed67c377d22a29bda9c1b4746e
Signed-off-by: Yuichi Kusakabe <yuichi.kusakabe@jp.fujitsu.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9453
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The mirror @ sources.openembedded.org was checked and has a copy of the tarball.
Revert "Add hotfix for sg3-utils SRC_URI not available"
This reverts commit e68fd87fe3be06583c8e76af777c42a19d6cf5a5.
Change-Id: I5024a0bfa304219c795390fca424f2cf4f3bbfb5
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9513
Reviewed-by: Martin Kelly <mkelly@xevo.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
|
|
ERROR: sg3-utils-1.42-r0 do_fetch: Fetcher failure for URL: 'http://sg.danny.cz/sg/p/sg3_utils-1.42.tgz'. Unable to fetch URL from any source.
Until fixed upstream, use a mirror.
Change-Id: Ia0d049ed6d2288adab836f59e82f0c359abaf7c6
Bug-AGL: SPEC-619
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9507
|
|
Change-Id: I0282804ff11a0f66d76c371f63cfc5ba1dd639a0
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9483
Reviewed-by: Martin Kelly <mkelly@xevo.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
There was a typo in DISTRO_FEATURE*S* . Fix it.
Change-Id: Ie0edcab5e2c9726248b5b4f1823ef1a73186fe1a
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9441
|
|
If graphics and multimedia acceleration packege is not located in
your Download directory, the error message is shown by red color.
v2:
Using tput instead of ANSI escape codes.
v3:
rebase after update BSP v2.19
Change-Id: Ica0c0ca557dd6b039cedc3bb45e6389f20fcd20f
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9415
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
* directly use the *.zip file, no need to untar any more.
Bug-AGL: SPEC-605
Change-Id: I970c0f7a7d2eeae05f2a53fd9eca1e0a37916938
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9373
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Changhyeok Bae <changhyeok.bae@lge.com>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Add 96boards-tools recipe for dragonboard-410c.
This tool resize the rootfs on the first boot.
The adding recipe is ported from meta-96boars layer(branch morty).
https://github.com/96boards/meta-96boards/
Change-Id: Ica597e36e530533cf4820a3b0a7ad2145bd3d6fb
Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9391
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The three packages fail to build on at least 3 boards.
Move to the distro config for now and track investigation in
SPEC-593.
Bug-AGL: SPEC-593
Change-Id: I97d55b6b34ea18fae943ab6bd89c88088896f2ac
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9379
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: José Bollo <jobol@nonadev.net>
|
|
This adds the machine templates for the beaglebone board.
The beaglebone is a YP reference system with very good
support out-of-the box. It might be too slow for the
graphical demos, but could serve well in headless setups.
v2: remove whitespace.
Bug-AGL: SPEC-590
Change-Id: I3f1d4f57d2ce01f2603446b6663fdaa636a1f7be
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9337
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Karthik Ramanan <a0393906@ti.com>
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Martin Kelly <mkelly@xevo.com>
|
|
This patch allows kernel sockets to be used by applications.
Bug-AGL: SPEC-554
Change-Id: Ib3562cb68334500b375b5dd341ead314c438f5e6
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9371
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This fix is propagated from:
https://gerrit.automotivelinux.org/gerrit/#/c/9337/
Change-Id: I3cc570848e5586ba3c5733fe16224ca402166094
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9369
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
The cyclone 5 is a cortex-a9 thus switch to the
matching compiler profile within AGL.
Change-Id: I19d695c653cc78c53dfce7a1adc27e7629256296
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9327
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Scott Murray <scott.murray@konsulko.com>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
boot.scr can be picked up elsewhere and fail the mcopy into
the boot filesystem. Currently need to allow the overwriting
which requires the whole bbclass to be mostly cloned from
meta-raspberrypi
Change-Id: I2839c782ec9a96a1c822dc1369e7e72aea0872e4
Bug-AGL: SPEC-409
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9319
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Due to the patchset "drm/vc4: Verify at boot that CMA doesn't cross a 256MB boundary"
the memory reserved for the GPU needs to be scaled back to 256MB
Change-Id: I593de129b40dd6263816b506e23db543eec71348
Bug-AGL: SPEC-410
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9321
Reviewed-by: Changhyeok Bae <changhyeok.bae@lge.com>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-557
Change-Id: Id126559e4114b191c923477e7dd04147cb1ec770
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9257
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Currently we expect uImages (by default and in SOTA).
Later kernels might default to Image.
Thus set KERNEL_IMAGETYPE to uImage.
Change-Id: I7995efb48cc2f9797d55b2ced5560dc1ea1e3a11
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9281
|
|
Yocto morty has mesa 12.0.1 but it has a bug for vc4 driver.
The bug is fixed in v12.0.2 and yocto upstream provides v12.0.3.
This commit is taking from
https://github.com/GENIVI/meta-genivi-dev/commit/e9c013951feb5c78519da04513ab79baf400264e.
Bug-AGL: SPEC-445
Change-Id: Idfd0878f3549c20eac77ae680a65347ec851bd94
Signed-off-by: Changhyeok Bae <changhyeok.bae@gmail.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9253
Reviewed-by: Changhyeok Bae <changhyeok.bae@lge.com>
Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Update linux-linaro-qcomlt to kernel 4.9.
Update smack patches for kernel 4.9.
Change-Id: Ia1fbc1787ef968bfd55d2ce48e01b1ea121762c7
Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9159
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Bug-AGL: SPEC-557
Bug-AGL: SPEC-558
Change-Id: I06e9dfc28adef4be0fcbe104c9458395dc8efa1d
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9239
Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
Reviewed-by: Matt Ranostay <matt.ranostay@konsulko.com>
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Replace SOTA-related sections with includes, moved u-boot-ota
common to minnowboard and qemu to meta-agl-bsp
Change-Id: I0629a63154ff90bd712f621297b886505a2f462c
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9189
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This reverts commit 521815fa95dba3d47704b62b4b6911fc994ad4c8.
Change-Id: I06e2ed97e2ea7897ccdee09aeec277c8a75ccfa0
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9187
|
|
Replace SOTA-related sections with includes, moved u-boot-ota
common to minnowboard and qemu to meta-agl-bsp
Change-Id: I531f0eec07bab01610a225afc6d32a2f3a8156ad
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
Reviewed-on: https://gerrit.automotivelinux.org/gerrit/9095
Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Previous changes(*) caused to be disable smack setting.
This patchset re-enable smack setting.
(*)https://gerrit.automotivelinux.org/gerrit/#/c/8569/
Bug-AGL: SPEC-450
Change-Id: I961192e42991a0d2542ca23fac030b8f3eba3fcf
Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
|
|
Previous changes(*) caused to be disable smack setting.
This patchset re-enable smack setting.
(*)https://gerrit.automotivelinux.org/gerrit/#/c/8567/
Bug-AGL: SPEC-450
Change-Id: Ib0e28b232ce9f39df71cd194baedbbaeab9f62ca
Signed-off-by: Kotaro Hashimoto <Hashimoto.Kotaro@ds.MitsubishiElectric.co.jp>
|
|
CONFIG_INPUT_UINPUT is needed for AVRCP controls to be registered
and function within bluez.
AGL-Bug: SPEC-540
Change-Id: Idbc63b8844fac595d73cb34f6a7eb4fb2243028d
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
* weston.service should not be a part of weston recipes
* remove weston.service from AGL weston recipes
* yocto upstream uses the recipe weston-init to startup weston
* customize weston-start with sed
- remove openvt
- add option to weston-launch
* customize weston.service with sed
- add option for weston
* unified the weston startup beteween AGL BSPs
* remove fix on the AGL BSP
Bug-AGL: SPEC-452
Bug-AGL: SPEC-310
Change-Id: I12722826abdc004214d289961e900c36528ec6e3
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
The BSP is doing it right in not defining any tunings and thus falling
back to armv7-a + softfloat.
All other targets use hardfloat. So until the DISTRO takes over
DEFAULTTUNE, we set it here for the board.
Change-Id: Iad4c15bc08f0baaed6f7cf7bfa1e3fae2f2fd739
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
VMWare Fusion defaults to SCSI disks, so we need it builtin to the
kernel to recognize the boot disk. While we're at it, add in other
useful VMWare-related modules.
Change-Id: Ia571142d5d3493b3b14619e6df29367bf06e5ae5
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
|
update weston.ini from Renesas rcar Gen3 BSP 2.17
Bug-AGL: SPEC-530
Change-Id: I5577a18cb5707c2484a46d3c91025ad087b6fa1e
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
update driver to version 2017-03-24.
Bug-AGL: SPEC-530
Change-Id: I5e18b5baa93419c80409b983de68ba4f7aaa74be
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
UBOOT_MACHINE is required when u-boot is used, but no generic
intel-corei7-64 config exists for u-boot, choose Minnowboard
Change-Id: If8bf05caaef98535aedef9d4ecd98cd2ab0c2e16
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
|
|
Previously it was a dependency to the image class, but for WIC
we have to define such dependencies in local.conf
Change-Id: I30f898553cd1cd8971d8768a9181d6e45857bf5d
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
|
|
Change-Id: Ia37920f6190e9dfe68c4d63a01f204ff6fc66423
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
|
|
Change-Id: Ida4de1eab50d7d83f6134ea0e7c27fd469517c5a
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
Change-Id: If77f088450ea9473523fdc35cb72fbc83bff285a
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
Apart from upgrading to 1.8.2 as the base, it also contains
several TI specific patches that are required to enable
functionality for kmssink and waylandsink.
A few bug fixes have also been included in this patch set.
This recipe is rehosted from meta-arago
Change-Id: I2a5b95db1b0e6b2b907f3e82ff738fd8124c0998
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
Change-Id: I080e800929f9b25428a604a23ac4d15df4ae3cad
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|
|
Change-Id: Idb53f6c42802d0ab4b4d995451c3dc76063ca498
Signed-off-by: Karthik Ramanan <a0393906@ti.com>
|