Age | Commit message (Collapse) | Author | Files | Lines |
|
Backported upstream patchset to fix CAN failures with SocketCAN
* net: sch_generic: Use pfifo_fast as fallback scheduler for CAN hardware
Additional patchset for 4.14 kernels to bring in needed if_afp.h header
Bug-AGL: SPEC-3171
Change-Id: I1ddb75d1aca64861cfc52f1df4ff810bd0367ab9
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
* Build wic images for qemux86-64 which can be written to a USB stick or
SD card.
* Support both virtual and physical displays for all qemu targets.
* Use a wks file which works on both virtual and physical machines. EFI
is now required to boot the VMDK image.
* Drop inclusion of `microcode.cpio` in the boot partition in the wic
file `systemd-intel-corei7-64-bootdisk.wks`. This file is not
available for qemux86-64 images and is not strictly necessary.
Bug-AGL: SPEC-2931
Change-Id: Ib3982906e52d3a964a921c9a2234cab697fe0551
Signed-off-by: Paul Barker <pbarker@konsulko.com>
|
|
These changes allow images built for the intel-corei7-64 machine to be
booted under qemu (by using the normal `runqemu` command) and vmware or
virtualbox after a build. Functionality on real hardware should not be
compromised.
Bug-AGL: SPEC-2931
Change-Id: If25782bf59e145cab32a4c9a0e39b599106ce7cc
Signed-off-by: Paul Barker <pbarker@konsulko.com>
|
|
Although the rpi-config_git.bbappend enable ENABLE_UART_raspberrypi4 =
"1", it seems make no effect.
This patch is temporary solution, which can do some help to debug pi 4
boot issue.
Bug-AGL: SPEC-2995
Change-Id: I0b634c4d8df576884b939ea259d4f8b7ca5330d7
Signed-off-by: Li Xiaoming <lixm.fnst@cn.fujitsu.com>
|
|
* The libgbm recipe has disappeared. "virtual/libgbm" is now provided by
ti-sgx-ddk-um.
* Update ti-sgx-ddk-km and adapt the AGL toolchain support to fit with
the upstream Makefile changes.
Change-Id: I2744868b466306cf2c1cb458a6889ab2043f9421
Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
|
|
Enable Bluetooth for 64-bit AGL images for Raspberry Pi through
recipe pi-bluetooth. It provides a script that starts
automatically and properly configures BT-HCI.
Bug-AGL: SPEC-2936
Change-Id: I01cd5ea446bfe5f4182284c5e88984ee054fe62f
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Switch from 32-bit to 64-bit AGL image for Raspberry Pi 4.
Machine configuration has been modified according to the existing
configurations from meta-raspberrypi branches master and zeus.
When AGL moves to a newer release of the Yocto project and the BSP
these configurations can be removed from meta-agl.
Bug-AGL: SPEC-2936
Change-Id: Iddc3f75be179797e7d56f6806ec6ba52b080d766
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
v2:
add PACKAGE_ARCH = "${MACHINE_ARCH}"
Bug-AGL: SPEC-2808
Change-Id: Id1587761c9be10a55ea18a938b74b39c512b63e2
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
When the ZIP files are already copied, it avoids to
reinstall the proprietary drivers.
This change is intended to facilitate workflows were
aglsetup is sparsely/rarely used.
Change-Id: I25275473d52ee7c811fdcaa50871bc1d385e868d
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
Update graphics kernel side driver to 20191021.
Bug-AGL: SPEC-2784
Change-Id: Ibce4e7ee5fe00d9c37e49b826bd62e39129f91a1
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
and also add the rpi4.
Bug-AGL: SPEC-2465
Bug-AGL: SPEC-2656
.
Change-Id: Ied2dce914ecc539c7634214b571508d371116235
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
Swith to firmware KMS with appropriate Linux kernel and Mesa
version to support both HDMI and the official 7" Raspberry Pi
touch screen display on Raspberry Pi 3B/B+ and 4. Device tree
changes are not required for firmware KMS.
Bug-AGL: SPEC-2465
Change-Id: I5f8f62c0151b7eb79ab1f96419d9c62469a1554e
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Update the firmware to support Linux kernel 4.19.80 for
Raspberry Pi 3 B/B+ and 4. This way both the HDMI and the
official 7" Raspberry Pi touch screen display are supported.
Bug-AGL: SPEC-2465
Change-Id: Idb028b8abca5a44da2783def8af2c28f04de66d2
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Update Linux kernel for Raspberry Pi to 4.19.80. This version
allows to run firmware KMS to support output through HDMI and
DSI for the official 7" Raspberry Pi touch screen display.
Bug-AGL: SPEC-2465
Change-Id: Ie854f8609196f986a1f9067da1010fb2e510e7c4
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Change-Id: Id9ca08ede2aedbc122a04d97ca4bb5bd8478b717
Signed-off-by: Changhyeok Bae <changhyeok.bae@daimler.com>
|
|
This fixes SPEC-2922.
Bug-AGL: SPEC-2922
.
Change-Id: I978c3d28e6d62885cd95ca6f2d2b32d34fa6933d
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
(cherry picked from commit 8a052edd56f801c465781b784bf1f53b15135c86)
|
|
Update virtualoutput.cfg weston.ini fragment to use the 640x720 size
expected by tbtnavi.
Bug-AGL: SPEC-2913
Change-Id: I46abf9d6d78671772951e52e4f80cac20720edcf
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
After updating the meta-ti layer to the ti2019.03 release, the
'omapdrm-pvr' package will no longer be defined. As the recipe is
already called 'ti-sgx-ddk-km' this change can be applied before
updating meta-ti.
Change-Id: Ie875a2a6d8a7b2f24460943558160f8aa37f544d
Signed-off-by: Paul Barker <paul.barker@sancloud.co.uk>
|
|
Include recipe pi-bluetooth in the Raspberry Pi 4 images to
enable Bluetooth. This recipe provides a script that starts
automatically and properly configures BT-HCI. The same script
is used in Raspbian.
Bug-AGL: SPEC-2656
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: Id650cb2f61ee63196cbd826e4a9dd73488b298c3
|
|
Apply patch from branch master of meta-raspberrypi as a bbappend
to recipe linux-firmware-rpidistro to fix WiFi on Raspberry Pi 4.
This is a temporary solution while AGL master is still based on
Thud. As soon as AGL moves to newer release of the Yocto Project
and layer meta-raspberrypi this patch will become reduntant.
The change of boardflags3 value from "0x48200100" to "0x44200100"
has been done already in Raspbian (2019-06-20). For more details:
https://github.com/RPi-Distro/firmware-nonfree/issues/3
Bug-AGL: SPEC-2656
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: Ifaafbae6ff59a43f95926e64f1ce35aefadd3cfa
|
|
To enable the gfx acceleration, enable the necessary flags in mesa.
Bug-AGL: SPEC-2656
Change-Id: I8bfb2f4034679f4703ddcb4bdb4c1363eee3d9d4
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
Bring Mesa 19.1.6 to meta-agl-bsp/meta-raspberrypi because there
are driver issues with Mesa 18.1 for Raspberry Pi 4. The recipes
for this new version are coming from the master branch of layer
openembedded-core. With the newer version of Mesa Weston works
fine on Raspberry Pi 4 and the home screen appears as expected.
Bug-AGL: SPEC-2656
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: I0d4f6e6fdff3c6ac54a72d19abfc292efcea7a3f
|
|
Bug-AGL: SPEC-2784
Change-Id: I55e014a08fd315d3460672240c6ace1a2f31c55d
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Following recent changes in the BSP the recipe for u-boot 2019.07
was failing to build for Raspberry Pi 4. This fix brings existing
patches from master branch of meta-raspberrypi to AGL which is
still based on Yocto project release Thud.
Bug-AGL: SPEC-2656
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: Ic544d02032198dc05da24bc3246e8911d300c1ea
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
pipewire is used default audio card volume. Current 50% of DVC Out
is laudy and 0% of DVC In is small.
Update 20% of DVC Out and 10% of DVC In for R-Car.
Bug-AGL: SPEC-2808
Change-Id: Iac572255977d6a0111026a6426081efb0edbf0aa
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
Add a systemd service unit and recipe to install it and a udev rules
file so that the Kingfisher Si4689 radio will be initialized on boot
if present, and the I2C device to access it will be accessible to
applications with the "audio" permission. Note that an accompanying
change to agl-service-radio is required to remove its now unworkable
usage of the si_init script, which is replaced by this change.
Bug-AGL: SPEC-2716
Change-Id: I81cf4b8c439598bdac1eb7910a0d693825141d7b
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Before we can add the h3 to CI we need a -nogfx build.
v3: leave the BBMASK in the board specific file due to inc file stacking.
Change-Id: Ic59784aa143e3346d2f999060214411497fc1b54
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
|
|
This seems to have broken master. Needs to be edited.
Thus revert and resubmit.
This reverts commit dd21b3a6e340006d2ef4036cabf33c9e9a66e9ac.
Change-Id: I2423dacba83813cc6350096c89d80cf1d23e9568
|
|
Before we can add the h3 to CI we need a -nogfx build.
v2: moved common bits
Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
Change-Id: I9d64764fbe69dc901dc91941db1deb0073e2ae9c
|
|
Add CMA to the kernel arguments in uEnv.txt for U-Boot in images
with enabled feature agl-sota for software-over-the-air (SOTA)
updates for Raspberry Pi 3 B/B+.
Bug-AGL: SPEC-2729
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: Id6914de6a41ebfd3fc28ca2948a15d891c9a30b3
|
|
Add netfilter.cfg fragment that initially enables
CONFIG_NETFILTER_XT_MATCH_OWNER to allow connman's
session-policy-local to route traffic based on user id.
Bug-AGL: SPEC-2772
Change-Id: I7fb642790709aff9899d42250b1b15f77451361e
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Make the filenames conformant to the original files.
Thanks to Khouloud Touil for finding this. Good catch!
Change-Id: I1e4e95dc1148ddf1a9a3a09c22ceab75d1d88115
Bug-AGL: SPEC-2721
Signed-off-by: build.automotivelinux.org <jenkins@automotivelinux.org>
|
|
Bug-AGL: SPEC-2680
Change-Id: Ie397c943762c20b0231ca7c0e44323bdf6101790
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
This reverts commit 9bc6c25f56f4997e55b60e969e9f942cc1859988.
Bug-AGL: SPEC-2680
Change-Id: Ice72ff5f510ac848679c7d09ed4d0bde2d0940d7
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
To allow dependant kernel drivers to be selected enable the
CONFIG_BT_HCIUART option.
Bug-AGL: SPEC-2747
Change-Id: Iafda86a9909ee14b10e4be2e5070bada4dfec9b0
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Bug-AGL: SPEC-2747
Change-Id: Ideef401474d8d74daf920273eb40200d4fe4dacd
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Remove old kernel options that no longer exist in modern kernels,
and also remove unset options that were causing warnings in the
do_kernel_configcheck task.
Bug-AGL: SPEC-2747
Change-Id: Iea61c2e4a1341d8f77723c37619ea6c9c59365d3
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
To avoid CONFIG_IIO_TRIGGERED_BUFFER being set as a builtin by
default causing a do_kernel_configcheck warning build as module.
Bug-AGL: SPEC-2747
Change-Id: Ide4011c25eb781daf135690205fef1cd591ea186
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Newer kernels have different configuration options names for
WLAN drivers, and need to be updated.
Bug-AGL: SPEC-2747
Change-Id: Ic35957172cec758a64219981a11ce155d296ca91
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
|
|
Modify uEnv.txt and uEnv.cma.txt according to the recent
changes in layers meta-updater and meta-updater-raspberrypi
to ensure that AGL image with agl-sota feature will boot
properly on Raspberry Pi 3 B/B+.
Bug-AGL: SPEC-2729
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: Ib8fe74bcd6e12208aaddc81f608fe84eee9de601
|
|
Recently we have updated u-boot to version 2019.07 to support
Raspberry Pi 4 in AGL based on Yocto release Thud. Therefore
a new version of the patch from meta-updater-raspberrypi branch
warrior has to be applied to successfully build U-Boot when
feature agl-sota is enabled.
Bug-AGL: SPEC-2729
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: Ie72cc9b81ff6e041cfe6edb26f383b7e0d43d8f9
|
|
Check if files exist before creating and deploying DTB. In some
cases, for example with AGL SOTA, the DTB and DTBO files might
not exist and without checks the recipe will fail.
Bug-AGL: SPEC-2729, SPEC-1775
Change-Id: Id96e0c56989569feead076406534334766604cfd
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
|
|
Both qemuarm and qemuarm64 builds lack USB drivers.
This patch enable basic USB drivers necessary for them.
Change-Id: I35064b0b4018c0953c609cebcab102b898d04f70
Bug-AGL: SPEC-2722
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
|
|
Disable building the EGLWLMockNavigation in wayland-ivi-extension to
avoid needing to patch it to build for the TI platforms. This fixes
the issue of meta-agl-bsp/meta-ti breaking non-graphics profile builds
like the telematics profile, and seems reasonable since there are no
known users inside AGL. Since it is no longer needed, also remove the
offending patch from meta-agl-bsp/meta-ti.
Bug-AGL: SPEC-2677
Change-Id: If87c3c238e880d01f99401ea4610616656f16185
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
To avoid the followings warning.
WARNING: No bb files matched BBFILE_PATTERN_rcar-gen3-cogent
Bug-AGL: SPEC-2708
Change-Id: I4bebc3203f947834b9264b4f79b0856c908af493
Signed-off-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com>
|
|
Remove ttyS2 from SERIAL_CONSOLES in the intel-corei7-64 include file.
This quiets the log spamming on Up^2 from the device not being present.
The commit that added ttyS2 to SERIAL_CONSOLES in meta-intel (61634f8)
does not explain what boards need it, but since neither the minnowboard
or Up^2 do, not having it by default seems reasonable.
Bug-AGL: SPEC-2678
Change-Id: I9afd1584dd7b92e8d15363c3119b770c592b3c52
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Update the i.MX6 machine definition include files to disable the
dynamic package architecture logic in meta-freescale, as it conflicts
with AGL's setting of DEFAULTTUNE and results in a split package feed.
Bug-AGL: SPEC-2665
Change-Id: I66ff03b0bc48b3b768b9ec88c907eaa95e1a2b00
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
Use different bootfiles if the machine has been set to the new
Raspberry Pi 4 and keep the old files for Raspberry Pi 3.
Bug-AGL: SPEC-2656
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: I3cbacc45c0f82ce2c70641c008ad2975a9e58fbd
|
|
Extend the deploy task to support Rasppberry Pi 4.
Bug-AGL: SPEC-2656
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: I3a166a873b431539e154ef6a2b1e69df02a0f2a3
|
|
Add U-Boot version that supports Raspberry Pi 4.
Bug-AGL: SPEC-2656
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Change-Id: Ib550e38c7ecaf0ab2149b04666cffdcbaaf08134
|