summaryrefslogtreecommitdiffstats
path: root/meta-agl-bsp
AgeCommit message (Collapse)AuthorFilesLines
2021-06-01Add initial j7-evm machine supportScott Murray1-0/+15
Add template and inc file for requested j7-evm machine. Notes: - The various images have been test built, including the agl-demo-platform image. No runtime testing has been done due to lack of hardware. - The proprietary SGX graphics support has not been enabled. This is due to both being unable to test, and it being unclear if it is required given the telematics usecases mentioned with respect to the hardware. - The shared TMPDIR for the non-optional multiconfig for building the bootloader has been shifted to a split one, as failures were reproducibly being seen when using the rm_work bbclass, and in general the community recommendation is to not share them. This does mean that cleaning up a build tree requires removing the tmp-k3r5 directory in addition to tmp. Bug-AGL: SPEC-3928 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I5c4e325b0b709b6571946475bf128bc25b171f6e Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26379 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-01Remove dra7xx-evm machine supportScott Murray9-1478/+0
Remove dra7xx-evm machine template and related BSP configuration tweaks. The configuration is stale and untested, and no one has expressed interest in it for long enough that it seems better to just remove it to avoid confusion about support status. Bug-AGL: SPEC-3934 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I1659eef113cf1e6fcfdddf65f712275b8fc49b6f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26378 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-06-01Update i.MX machine configurationsScott Murray6-69/+32
Changes: - Add new i.MX and i.MX6 common inc files and shift duplicated configuration to them. - Switch to using the newer IMX_BSP_DEFAULT variable mechanism for selecting mainline vs NXP bits, instead of adding use-mainline-bsp to MACHINEOVERRIDES. - Remove the accidental addition of agl-medium-arm-compiler to DISTRO_FEATURES for the imx8mqevk configurations. - Remove some other stale variable definitions. - Update BSP layer path in i.MX6 template 50_setup.sh files, these were missed on a previous update. Bug-AGL: SPEC-3933 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I0145e3c8b73b4d53706fda4237ab10f181fd16f7 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26377 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-04-30virtio: Backport virtio sound driver.Vasyl Vavrychuk12-0/+4156
Added patch series is the latest implementation [1] of virtio sound device [2] driver. It was accepted [3] by sound maintainer for the next kernel version. virtio-snd.cfg snippet has been generated using menuconfig/diffconfig tasks by selecting SND_VIRTIO, other configs have been selected automatically. [1]: https://lore.kernel.org/alsa-devel/20210302164709.3142702-1-anton.yakovlev@opensynergy.com/ [2]: https://github.com/oasis-tcs/virtio-spec/blob/master/virtio-sound.tex [3]: https://lore.kernel.org/alsa-devel/s5hsg575q5z.wl-tiwai@suse.de/ Bug-AGL: SPEC-3894 Change-Id: Ide484b4a70e5d2aef0726f701f87d783e128c4d3 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26291 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-04-30virtio: Bump virtio-aarch64 kernel to version v5.10.Vasyl Vavrychuk2-0/+69
There are a number of virtio drivers [1,2] developed on top of newer kernel version. To simplify their backporting it is better to have newest possible kernel version. Use v5.10 since at the moment it is latest available Linux Yocto kernel. As a sacrifice, some external kernel modules have to be disabled since they fail to compile with newer kernel. Recipe imported from repo: https://git.yoctoproject.org/cgit/cgit.cgi/poky/ branch: master commit: a870101 path: meta/recipes-kernel/linux/linux-yocto_5.10.bb [1]: https://lore.kernel.org/alsa-devel/20210302164709.3142702-1-anton.yakovlev@opensynergy.com/ [2]: https://lore.kernel.org/linux-arm-kernel/20201105212116.411422-1-peter.hilber@opensynergy.com/ Bug-AGL: SPEC-3894 Change-Id: I8ac793c1075bdeaa96d03252b97abcf983bb7ee0 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26290 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-04-30virtualization/linux-yocto: Fix multitouch with virtio-input.Vasyl Vavrychuk2-0/+67
Multitouch support with virtio-input was broken which can be observed: * by running weston-simple-touch with weston compositor ( weston-simple-touch does not work with AGL compositor due to XDG shell issues) * by doing pinch to zoom in/out on navigation app map Change-Id: I3ec2a989a4217ebe22cee9cf1640190ca8e2bb81 Bug-AGL: SPEC-3893 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26289 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-04-30virtualization/linux-yocto: Add virtio-aarch64-standard.scc to SRC_URI.Vasyl Vavrychuk2-1/+2
It allows to use patch command to apply patches via scc file. As explained in [1,2], Yocto kernel metadata is commonly used for two purposes: 1. To construct Yocto kernel git by committing patches listed in scc files. 2. To configure Yocto kernel during Yocto build. When scc file is not explicitly added to SRC_URI, then patch commands will be ignored during Yocto build because it is assumed that patches are already pre-applied during Yocto kernel git tree construction. On the other hand, nopatch should be added to standard.scc because patches from it are actually pre-applied. [1]: https://www.yoctoproject.org/pipermail/yocto/2019-October/046986.html [2]: https://docs.yoctoproject.org/kernel-dev/maint-appx.html Change-Id: Id238e79e1b354daaa23e83bef45fc93a216fbf92 Bug-AGL: SPEC-3893 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26288 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-04-30virtualization/linux-yocto: Reorganize layout of linux-yocto kernel virtio ↵Vasyl Vavrychuk6-3/+3
metadata. Follow layout of yocto-kernel-cache, this makes code a little bit more understandable and familiar for one who worked with yocto-kernel-cache. Change-Id: I1ad65039a1738b928069d035d485e2728e8a55b2 Bug-AGL: SPEC-3893 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26287 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-22[RCAR] Fix sound on ulcb boardRonan Le Martret2-4/+1
After RCAR BSP 4.7.0, m3ulcb and h3ulcb (without kingfisher layer) does not have audio after BSP Update. The sound car is named ak4613 now for booth ulcb card and ulcb +kf card.(no rcarsound name anymore) Bug-AGL: SPEC-3849 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: Id759de2a0df90cd216106da54870f663ca7adb64 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26189 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-18Mask patch causing crash in luaJan-Simon Moeller1-0/+4
The patch CVE-2020-15945.patch applied by meta-oe does crash the lua ptest in db.lua (segfault). Mask the patch until a solution is found upstream. Bug-AGL: SPEC-3828 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I27eeea4a47b653fe13b9f949b3d792602a3c6e1a Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26183 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account
2021-03-15meta-agl-bsp: add pseudo abort workaround for rcar3 buildsScott Murray1-1/+31
Add workaround to avoid pseudo aborts triggered by the rcar3 kernel module recipes writing to KERNELSRC in do_install, errors are of the form (from pseudo.log): path mismatch [27 links]: ino 19366408 db 'NAMELESS FILE' req 'build/tmp/work-shared/h3ulcb/kernel-source/include'. See the commit messages in poky commits 4e7c211 and 3b7f2c6 and the wiki page at: https://wiki.yoctoproject.org/wiki/Pseudo_Abort for details on the pseudo behavior change. These can potentially be moved to the recipes in the BSP, or removed if the recipes are changed to shift the module headers and symbols to their dev packages. Bug-AGL: SPEC-3840 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ic872e1cec1ccbd37a5a53d146119fa5053b85482 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26147 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-15[RCAR] u-boot: move redundant-yyloc-global patch to u-boot-common.incRonan Le Martret2-0/+30
gcc10 build issue occurs in both u-boot and u-boot-tools (From OE-Core rev: 2e128a775a3d51dc1856a35e2f5135d3c156d10e) Bug-AGL: SPEC-3804 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I7be66b06e99415fa7b6c3a7a2c397d00ee44b4cc Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26052 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-15[RCAR] Update BSP Renesas RCAR gen3 to version 4.7.0Ronan Le Martret2-11/+6
Bug-AGL: [SPEC-3804] Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I2a5c9dce63cd7c681cf9a36cf530e432081e1c6b Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26051 Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-15Revert "meta-renesas: workaround recipe incompatibilities with YP 3.1.4"Ronan Le Martret5-189/+0
Bug-AGL: SPEC-3804 This reverts commit 8b4612385bbf4cdf523c9b731ed73c7887995372. Change-Id: I4a70f1cc57bf2265846b3a208b74c46a786ec622 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26050 Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-15Revert "meta-renesas: update gstreamer version workaround"Ronan Le Martret3-6/+6
Bug-AGL: SPEC-3804 This reverts commit 0fcc99e2b74b7e393980c2e3bfe9863b5dbc8ae4. Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: Iabc9a6e7c8a2db86411b9b5e788b38d41564d351 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26049 Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-03-09meta-agl-bsp: clean up Raspberry Pi Xen supportScott Murray7-54/+19
Changes: - Rename bbappend for Xen support to work with 5.4 kernel. - Drop one of the Xen support patches that no longer applies, as it seems no longer required due to upstream changes. - Move Xen kernel configuration fragment use to non-versioned kernel bbappend to simplify future upgrades. - Move ENABLE_UART definition to machine template inc files instead of duplicating it in multiple bbappends. This is more in line with how upstream indicates it be used. Note that these changes have been compile tested with the agl-virt-xen feature, but the resulting image has not yet been tested with Xen. This is still an improvement, as agl-virt-xen would have silently not affected kernel configuration previously. As well, some of the reshuffling done here will simplify the kernel upgrade in the next branch. Bug-AGL: SPEC-3841 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I022cccef00fcd0a82ceef89d4aab1894004543a3 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26144 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-02-16meta-agl-bsp: Fix agl-refhw-h3 BBMASK definitionScott Murray1-1/+1
Use += with BBMASK definition to avoid over-writing other additions. Bug-AGL: SPEC-3798 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: If6d5850e7dc07de56c2a6737634f0c0935ec2030 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26040 Reviewed-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Tested-by: Jenkins Job builder account
2021-02-16meta-renesas: update gstreamer version workaroundScott Murray3-6/+6
The wildcard bbappends added as a workaround for gstreamer 1.16.3 versus 1.16.2 for the dunfell 3.1.4 upgrade (SPEC-3706) were less than ideal since they still pointed at the 1.16.2 branch in Renesas' repositories. They have advised that 1.16.3 support branches are now available, so update the workaround bbappends to use them, and change the wildcard usage back to the full version number. This should hold us until the BSP v4.1.7 update, when these bbappends can be removed. Bug-AGL: SPEC-3803 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I56e6699dce8b45f3c5f713958c43b9bbc8af8ec6 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/26039 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-02-05meta-agl-bsp: Add reference hardware GPS supportScott Murray5-0/+113
Add recipe for gpsd configuration for the reference hardware, which also installs a script plus systemd unit drop-in to handle enabling and disabling it. The latter is required due to the reference hardware's reuse of the h3ulcb image, which means the existing PREFERRED_PROVIDER_virtual/gpsd-conf scheme is not sufficient in this case. Bug-AGL: SPEC-3792 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ifaf3b93d06825f7c5c6a8ce2773d93931e47178c Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25994 Tested-by: Jenkins Job builder account ci-image-build: Jenkins Job builder account ci-image-boot-test: Jenkins Job builder account Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-26Allow -nogfx boards to start the homescreenJan-Simon Moeller3-0/+12
This allows to produce working images without restricted licenses. Software rendering will be slow and screen updates take a while. v2: adapted to use WESTON_USE_PIXMAN Bug-AGL: SPEC-3774 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iaea1985da48985dfe223471a86b04d8921cc8d7a Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25933 Reviewed-by: Scott Murray <scott.murray@konsulko.com> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2021-01-26qemu[arm,arm64]: enable runqemu in graphic modeJan-Simon Moeller2-16/+19
This adds the necessary flags to launch runqemu for the qemuarm target with the full graphical agl-demo-platform image. Slow but working. Bug-AGL: SPEC-3764 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iffc2158e53d775d578b1d4ee0e94d3fd68e2a028 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25930 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Scott Murray <scott.murray@konsulko.com>
2021-01-26raspberrypi: Upgrade to u-boot v2020.10Paul Barker4-0/+11
The newer u-boot version supports the network interface on the rpi4, allowing us to do things like DHCP boot. Also switch to the preferred "rpi_arm64" u-boot config. Bug-AGL: SPEC-2983 Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: I0dff4779f98c7ce6394efd9feb58b7f2a8933296 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25937 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-19raspberrypi: agl_raspberrypi4.inc: Unpin kernel versionPaul Barker1-3/+0
Now that the failure in create-combined-dtb has been resolved (by patching dtc), we can unpin the version of linux-raspberrypi and use the 5.4 kernel series. Bug-AGL: SPEC-3702 Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: I0da4eb7ccd17d816477d28864185278084abd9b4 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25840 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-16meta-agl-bsp, templates: Add virtio-aarch64 machineVasyl Vavrychuk9-0/+142
This machine is intended to run in ARMv8 virtualized environment that provides VirtIO devices. AGL machine configuration files are based on qemuarm64 machine from meta-agl branch master commit e1da0efcd2eece82b0326798cfeaeb8dd48797fc. Yocto machine configuration files are based on qemuarm64 machine from Poky branch dunfell commit 4e931b1d05018923dc145cd97f6f965f5cb6e1a5. Yocto Linux Kernel is used as recommended in [1]. Its metadata for the created machine are based on qemuarm64-standard.scc from yocto-kernel-cache branch yocto-5.4 commit 4aeda12f7f7eb84613ae1fe6e22cd9cd9790c20b. The rationale behind creating new machine is a wish to have a machine that could run on other hypervisor/virtual machine monitor that implements VirtIO, not necessary QEMU. For now, virtio-aarch64 machine runs under QEMU and OpenSynergy COQOS Hypervisor. virtio-aarch64 machine includes following changes comparing to qemuarm64: * use virtio-gpu instead of VGA display (to be upstreamed to work in conjunction with runqemu gl, sdl, etc. options) * use virtio-bus instead of PCI bus QEMU devices * remove unneeded configurations Changes are moved here from meta-agl-devel. [1]: https://www.yoctoproject.org/docs/3.1.2/bsp-guide/bsp-guide.html#released-bsp-recommendations Bug-AGL: SPEC-3668 Signed-off-by: Vasyl Vavrychuk <vasyl.vavrychuk@opensynergy.com> Change-Id: I653ca35fded3d3e38f25299f46629db1174b5008 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25915 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-12linux-raspberrypi: Tidy patches & config fragmentsPaul Barker5-3/+0
Move all patches and config fragments into the linux-raspberrypi subdirectory to remove confusion and warnings seen for non-4.19 kernel versions: WARNING: .../bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_4.14.bb: Unable to get checksum for linux-raspberrypi SRC_URI entry 0001-mconf-menuconfig.patch: file could not be found WARNING: .../bsp/meta-raspberrypi/recipes-kernel/linux/linux-raspberrypi_5.4.bb: Unable to get checksum for linux-raspberrypi SRC_URI entry 0001-mconf-menuconfig.patch: file could not be found Bug-AGL: SPEC-3760 Cc: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: Iccb9efcd8240f28437e3494bd008dc9aca649c4e Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25887 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-12meta-agl-core: Revise weston-ini-conf mechanismScott Murray5-23/+13
The recent layer reorganization broke the landscape vs portrait scheme based on bbappend'ing the weston-ini-conf recipe in the previous cluster and html5 demo layers. To fix this and to facilitate being able to easily build the mix of demo platform images, the weston.ini generation mechanism in the weston-ini-conf has been revised to build multiple packages. Instead of relying on SRC_URI to install weston.ini fragments into WORKDIR and grabbing all of them with a *.cfg glob, an explicit list built from new WESTON_FRAGMENTS and WESTON_DISPLAYS variables is used. The fragments listed in WESTON_FRAGMENTS are used to generate both weston-ini-conf and weston-ini-conf-landscape packages containing uniquely named files (weston.ini.default and weston.ini.landscape, respectively), and the OE update-alternatives mechanism is used to have weston.ini point at the appropriate file on installation. For now, the two packages are explicitly marked as incompatible with one another, but this could be tweaked in the future if switching between them on target is desired. Additional notes: - A RPROVIDES of "weston-ini" has been defined for the weston-ini-conf packages and a RDEPENDS on it added to weston-init. This should allow members to drop in a complete alternative solution while still having a dependency chain. - The various meta-agl-bsp bbappends of weston-ini-conf have for the most part been updated to yield the same behavior as before, though with an eye towards using machine overrides to ease multiconfig usage down the road. This includes the currently unused Raspberry Pi touchscreen support, which has been left since it may still see use. - An exception to the above, however, is that the support for the touchscreen on the dra7 EVM has been removed, as upstream dropped the support for the screen on the available test hardware and at present it only seems feasible to support external HDMI monitors. - The unused fbdev fragment used to support meta-freescale in the past has been removed. - The virtual and virtual-landscape fragments have been renamed to virtual-270 and virtual-0 to better indicate the orientation and match the naming used for the other fragments. It is likely that future work will need to split the display enabling and orientation aspects, as the current tying together of the two results in configurations somewhat overly specific to the actual AGL demo systems. Bug-AGL: SPEC-3745 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I2a968781182a346c1d483cca4fd7337679e58118 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25860 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-11Fix bitbake -c menuconfig for linux-raspberrypiJan-Simon Moeller2-0/+49
This patch is included in linux-yocto to fix the cross-ncurses library issue. Add to meta-agl-bsp until resolved upstream. Bug-AGL: SPEC-3760 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iac9222a62ab943cce6176787b76cf0c2395688e8 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25882 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2021-01-11raspberrypi: dtc: Prevent overlays from modifying phandle propertiesPaul Barker2-0/+157
The cma-overlay fragment included in vc4-fkms-v3d-overlay ends up with a phandle property within the __overlay__ fragment due to the references to this fragment from the __overrides__ section. So when this overlay fragment is applied it was modifying the phandle of the target node, breaking other references to this node in the base dtb and breaking the resolution of symbols within the fdt. The failure is seen in the create-combined-dtb recipe but the best place to fix this is in libfdt itself. When applying an overlay fragment, if both the target node and the overlay fragment contain phandle properties we skip modification of the target node phandle. The included patch has been submitted upstream for review. Bug-AGL: SPEC-3702 Signed-off-by: Paul Barker <pbarker@konsulko.com> Change-Id: I0661de41162fa4f8eed8421878049b9027536b41 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25839 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Scott Murray <scott.murray@konsulko.com> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2021-01-08meta-agl-bsp: enable HCI UART for i.MX8MQ EVKScott Murray4-0/+90
Changes: - Remove explicit "not set" options in btusb.cfg kernel configuration fragment to avoid over-riding BSP configuration. - Add helper script and systemd unit to detect HCI UART device on i.MX8MQ EVK and EVKB and run hciattach as necessary. While logic has been added for the QCA6174 on the i.MX8MQ EVK, note that it has not been tested due to lack of hardware availability to test. Bug-AGL: SPEC-3545, SPEC-3681 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Iae3a58ccfbdb31698ae012ab7d03c9259ac83013 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25842 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2021-01-06meta-agl-bsp: add kernel-devicetree to nogfx rcar3 imagesScott Murray2-1/+4
Shift the IMAGE_INSTALL_append of the kernel-devicetree package to agl_rcar-nogfx.inc so that it will be added to the *ulcb-nogfx images in addition to the *uclb images. This fixes booting the nogfx images from SD cards created with the wic.xz image. Bug-AGL: SPEC-3754 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: If4868326f50e45046fcce7b5d6ba43f13f746ec1 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25866 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-17SPEC-3723: restructure meta-aglJan-Simon Moeller69-1502/+25
Goal is to reach a minimal meta-agl-core as base for IVI and IC work at the same time. Trim dependencies and move most 'demo' related recipes to meta-agl-demo. v2: changed to bbapend + .inc , added description v3: testbuild of all images v4: restore -test packagegroup and -qa images, compare manifests and adapt packagegroups. v5: rebased v6: merged meta-agl-distro into meta-agl-core, due to dependency on meta-oe, moved -test packagegroup and -qa images to own layer meta-agl-core-test v7: Fixed comments from Paul Barker v8: Update the markdown files v9: restore wayland/weston/agl-compositor recipes/appends, reworked to move app f/w specific changes to bbappends in meta-app-framework and only demo specific weston-init changes to meta-agl-demo v10: fix s/agldemo/aglcore/ missed in weston-init.bbappend Description: This patch is part 1 out of 2 large patches that implement the layer rework discussed during the previous workshop. Essentially meta-agl-core is the small but versatile new core layer of AGL serving as basis for the work done by the IC and IVI EGs. All demo related work is moved to meta-agl-demo in the 2nd patchset. This should be applied together as atomic change. The resulting meta-agl/* follows these guidelines: - only bsp adaptations in meta-agl-bsp - remove the agl-profile-* layers for simplicity -- the packagegroup-agl(-profile)-graphical and so on have been kept in meta-agl-demo - meta-agl-profile-core is now meta-agl-core - meta-agl-core does pass yocto-check-layer -- therefore use the bbappend + conditional + .inc file construct found in meta-virtualization - meta-agl/meta-security has been merged into meta-agl/meta-app-framework - meta-netboot does pass yocto-check-layer - meta-pipewire does pass yocto-check-layer Migration: All packagegroups are preserved but they're now enabled by 'agl-demo'. Bug-AGL: SPEC-3723 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Ia6c6e5e6ce2b4ffa69ea94959cdc57c310ba7c53 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25769
2020-12-17[RCAR] disable a default config in kernelronan1-0/+4
The meta-rcar layer activates by default the configuration MTD_RENESAS_RPC_HYPERFLASH in kernel. MTD_RENESAS_RPC_HYPERFLASH is not upstream, it's a meta-rcar specific feature. MTD_RENESAS_RPC_HYPERFLASH feature in the kernel need an firmware update on the board and can be considered (IMHO) as a security issues in production. We need to set DISABLE_RPC_ACCESS to deactivate it. v2 (jsmoeller): Use ?= for DISABLE_RPC_ACCESS . Bug-AGL: SPEC-3674 Signed-off-by: ronan <ronan.lemartret@iot.bzh> Change-Id: Iefaf9ca115d1fb805b0d3766fc0c800b74daecee Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25815 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-16templates: qemuriscv64: Initial commit of qemuriscv64 machineAlistair Francis1-0/+11
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Change-Id: I50a966dcbe051ae5369e28291e5bb62cd40267b9 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25105 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-16hsdk/arc: remove incompatible packages from packagegroupsJan-Simon Moeller1-0/+5
These packages are not yet supported on arc. Exclude them from the build. Bug-AGL: SPEC-3719 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I3c93fc792343b4d45a66d0a1062b1bf49669a004 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25761 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-12-11meta-agl-bsp: Update i.MX8MQ EVK support for latest dunfellScott Murray6-209/+17
The layer updates to go to the latest 3.1.4 Yocto dunfell release broke the imx8mqevk and imx8mqevk-viv builds, though for different reasons. imx8mqevk fixes: - Remove the now upstreamed etnaviv kernel patches that had been backported by Walter. - Turn off btrfs support in the linux-fslc-imx kernel configuration. This is required due to meta-freescale having a 5.4 kernel new enough to need a lttng-modules fix for btrfs that has not yet been backported from the Yocto master branch to dunfell. - Update the PREFERRED_VERSION over-rides in agl_imx8mqevk.inc to match the new versions of libdrm and gstreamer in poky. imx8mqevk-viv fixes: - Add weston_8.0.0.imx.bbappend to work around the broken addition of a PACKAGECONFIG_remove of "x11 wayland" in the recipe in meta-freescale. Upstream will be engaged to drive getting the change reverted. Bug-AGL: SPEC-3725 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I259f2d048a9de653a0060afcef17c4410093783a Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25772 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
2020-12-11Add README files to layersJan-Simon Moeller1-0/+7
This is a requirement of the yocto-check-layer script. Bug-AGL: SPEC-3724 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I60c41d77d4b83eccf4e69651c1fe7cd334a16cc5 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25768
2020-12-08Renesas: Adapt setup script following changesFrederic Marec1-1/+7
Renesas website change for a new one. We need to change the name of downloaded drivers because of that. Bug-AGL: SPEC-3715 Change-Id: I7f2ab0335709aa5dee895e6169692e23a9a2f099 Signed-off-by: Frederic Marec <frederic.marec@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25737 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-12-04Fix the -nogfx builds for the YP 3.1.4 uprevJan-Simon Moeller2-0/+5
This fixes Missing or unbuildable dependency chain was: ['agl-image-minimal-crosssdk', 'waltham-dev'] Bug-AGL: SPEC-3706 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Ic80bf6cac57b53edda112f38a92884ed8506d74d Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25728 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-12-04pi4: pin kernel to 4.19 prior to the YP 3.1.4 uprevJan-Simon Moeller1-0/+3
The uprev to YP 'dunfell' 3.1.4 would change the default kernel used by the pi4. This has an effect on the DTBo's used for booting and in CI. One effect is that create-combined-dtb won't no longer build. Also we might have to change away from fkms on kernel 5.4 . Bug-AGL: SPEC-3702 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: If7353c1b9fde4ef4fe6456ce969a37e2734c5a79 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25716
2020-12-04meta-renesas: workaround recipe incompatibilities with YP 3.1.4Jan-Simon Möller5-0/+189
This adds a workaround for the strictly versioned bbappends until the BSP could be updated. Bug-AGL: SPEC-3706 Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org> Change-Id: I7267974d8ea8412ad40ca9b351d03a5a107c0e3f Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25715 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-12-04meta-agl-profile-graphical: add device dependency hook in weston-initScott Murray1-0/+3
Add a mechanism in the weston-init recipe to allow machine templates to trigger installation of a systemd drop-in that adds a DRM device dependency for the weston@.service unit. Also, tweak the qemux86-64 configuration to enable doing so against dev-dri-card0.device to avoid startup failures due to the slow i915 initialization on e.g. the UpSquared. This approach has been taken since it seems safer for now to only apply it for qemux86-64 than doing a blanket default that might then need to be over-ridden for vendor BSPs. Bug-AGL: SPEC-3518 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: I74ce4f878f9aa3f0d555f96a79578f3d8ca72550 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25675 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-11-25Add AGL reference hardware featureScott Murray1-0/+10
Add a feature template to enable AGL H3-based reference hardware support. A feature is used as opposed to a new machine in order to meet the requirements that: * the reference hardware be bootable with a h3ulcb machine image to avoid expanding the CI test matrix * the reference hardware support be optional to not hinder Renesas BSP maintenance for the h3ulcb / h3ulcb-kf base machines If the required kernel changes for the reference hardware get upstreamed and eventually become available via the Renesas BSP this can be revisited, as the reference hardware support could then likely be reduced to just building the extra devicetree file(s). Bug-AGL: SPEC-3658 Signed-off-by: Scott Murray <scott.murray@konsulko.com> Change-Id: Idcf0b8cfe8eb3c5485663ee25519a9c445362829 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25619 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-11-04Revert "[RCAR] Fix gcc 10 build failed on u-boot and kernel."Ronan Le Martret4-89/+0
Bug-AGL: SPEC-3674 This reverts commit 66814faec0f8e589b48af8c22a70d94d96bf0957. Change-Id: Iad269aac57a58d909ab5ea97110538e5a89cab80 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25499 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-10-21Add dummy sound module for special test casesJan-Simon Moeller1-0/+3
Enable the dummy sound device as module so we can load it on demand. Bug-AGL: SPEC-3612 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Ia2fda3dff2f71d26726941a8be4ebd68a0cd9787 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25432 ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-10-19[RCAR] Update Renesas BSP to v4.1.0Ronan Le Martret3-15/+15
Bug-AGL: [SPEC-3617] Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: Ic1f4c424f76ff5c357752e32aa8a47ff805273dc Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25417 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Harunobu Kurokawa <harunobu.kurokawa.dn@renesas.com> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-10-19Only include hda sound modules for qemuallJan-Simon Moeller3-18/+21
Limit the HDA sound module inclusion to all qemu targets. Bug-AGL: SPEC-3612 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Iba3a7387c58f1738c1cd98df1d13584c2fff17b7 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25443
2020-10-19Add the codecs for HDA audio by defaultJan-Simon Moeller1-0/+14
Beside the snd_hda driver we also need to enable the codecs for it to work. This fixes: hdaudio hdaudioC0D0: Unable to bind the codec Bug-AGL: SPEC-3612 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: Ic978ea164e2f04b15babd26524f2e335ad21b982 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25440 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>
2020-10-15[RCAR] Fix gcc 10 build failed on u-boot and kernel.Ronan Le Martret4-0/+89
* cherry pick upstream patch to fix u-boot and linux kernel on gcc 10 build issue. Bug-AGL: [SPEC-3617] Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Change-Id: I0c85938287861a8efc328b5c08bbf364027f6473 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25416 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh>
2020-10-15[RCAR] Fix smack rule for pvr deviceRonan Le Martret1-0/+5
The GL driver needs to access to the powervr sync device /dev/pvr_sync (provided by gles-user-module). If a graphic application wants access to display (SupplementaryGroups=display), and so GL access, the ACL on /dev/pvr_sync must have: - a smack label "*" - a dac (group display) m3ulcb:~# ls -lZ /dev/pvr_sync crw-rw----. 1 root display * 10, 59 Jun 29 03:06 /dev/pvr_sync Bug-AGL: [SPEC-3617] Change-Id: Ia6472424ac07c60a5c16cb6f48174481e8dd759d Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25415 Reviewed-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Reviewed-by: Stéphane Desneux <stephane.desneux@iot.bzh> Tested-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org>
2020-10-14Enable veth when using nbd boot optionJan-Simon Moeller1-0/+2
This patch enables the VETH kernel config. We use this to make sure the network binding finds a valid ethernet device through connman even if 'eth0' is used by nbd and thus not visible to connman. Bug-AGL: SPEC-3631 Signed-off-by: Jan-Simon Moeller <jsmoeller@linuxfoundation.org> Change-Id: I056ff6dc8f83bdb707cfbac90562388c4e742b43 Reviewed-on: https://gerrit.automotivelinux.org/gerrit/c/AGL/meta-agl/+/25421 Tested-by: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-build: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org> ci-image-boot-test: Jenkins Job builder account <agl-jobbuilder@automotivelinux.org>